summaryrefslogtreecommitdiff
path: root/scripts/contrib
AgeCommit message (Collapse)AuthorFiles
2013-09-30mkefidisk.sh: Allow using a loopback mounted fileJason Wessel1
It should be possible to generate a disk to a file using a loopback device with mkefidisk.sh, which is useful for booting simulators. To make this possible the partitions for the loop back need to work similarly to the mmc devices. The mkfs.vfat also requires and additional argument to force it to write to something other then a real disk. Example: qemu-img create -f raw bigdisk 4G dev=`sudo losetup -f` sudo losetup $dev bigdisk mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda sudo losetup -d $dev Note: Also a bug was fixed in the mkefidisk.sh where if the disk you are writing to initially has an invalid label the size of the first partition will be computed incorrectly. For the simulator disk creation this is generally always the case, but this can happen with real hardware as well. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-14scripts/contrib/build-perf-test.sh: record size in kb and remove extra spacesStefan Stanacar1
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-12bb-matrix-plot: Use interpolation for sparse dataPeter Kjellerstedt1
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16" and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by default looks very jagged due to the missing data points. By using splines to interpolate the missing data the graph looks a lot better. This should not change graphs where all data points are available in any way, only improve sparse graphs. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-12bb-matrix: Clean before, rather than after, buildingPeter Kjellerstedt1
This makes sure the the first build starts from a clean state. Otherwise one could have the first build affected by any leftover state from a previous build. This also leaves a working state behind after the final build. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30list-packageconfig-flags.py: fix searching bitbake module failedHongxu Jia1
Run list-packageconfig-flags.py on wrlinux's platform in which the oe-core layer and bitbake layer in different directories: ---- ../layers/oe-core/scripts/contrib/list-packageconfig-flags.py Traceback (most recent call last): File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module> import bb.cache ImportError: No module named bb.cache ---- The script import bb module from bitbake lib dir, the previous lib dir was hardcode and only worked on poky but not for others. In this situation, look for bitbake/bin dir in PATH could fix this issue. [YOCTO #5060] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26python-2.7-manifest: Add missing python-ctypes dependency to ↵Richard Purdie1
python-multiprocessing Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-05list-packageconfig-flags.py: add a script to list all PACKAGECONFIG flagsHongxu Jia1
- This script will list available pkgs which have PACKAGECONFIG flags. - If option '-f' is used, it will list available PACKAGECONFIG flags and all affected pkgs. - If option '-a' is used, it will list all pkgs and PACKAGECONFIG information - If option '-p' is used, it means list the pkgs with preferred version EXAMPLE: list-packageconfig-flags.py PACKAGE NAME PACKAGECONFIG FLAGS ============================================================== alsa-tools-1.0.26.1 defaultval gtk+ avahi-ui-0.6.31 defaultval python bluez4-4.101 alsa defaultval pie list-packageconfig-flags.py -f PACKAGECONFIG FLAG PACKAGE NAMES ==================================== 3g connman-1.16 avahi cups-1.6.3 pulseaudio-4.0 beecrypt rpm-5.4.9 rpm-native-5.4.9 list-packageconfig-flags.py -a ================================================== gtk+-2.24.18 /home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb PACKAGECONFIG x11 PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS} xf86-video-intel-2.21.9 /home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb PACKAGECONFIG None PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc PACKAGECONFIG[sna] --enable-sna,--disable-sna [YOCTO #4368] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05scripts/contrib/mkefidisk.sh: fix bashismChen Qi1
Remove the function keyword. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18scripts/contrib/*: fix arithmetic bashismPaul Eggleton2
Apparently $[...] isn't valid in dash, so use $((...)) instead for mkefidisk.sh and ddimage that both start with $!/bin/sh. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-28python-multiprocessing: adding runtime dependenciesLukas Bulwahn1
As python-multiprocessing requires python-threading and python-pickle, this commit adds them as runtime dependency. The observed behavior was: When typing 'import multiprocessing' in the python shell on a minimal image with only the python-multiprocessing recipe installed, python reports at first: Python 2.7.3 (default, Jun 27 2013, 08:26:25) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import multiprocessing; Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module> from multiprocessing.util import SUBDEBUG, SUBWARNING File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module> import threading # we want threading to install it's ImportError: No module named threading After adding python-threading as runtime dependency and rebuilding the image, python reports: Python 2.7.3 (default, Jun 27 2013, 08:26:25) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import multiprocessing; Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module> import _multiprocessing ImportError: No module named cPickle Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-13scripts/contrib/build-perf-test.sh: fix passing argumentsStefan Stanacar1
Don't pass arguments to bitbake as a single one, because this will break when the bitbake double-exec is removed. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-13scripts/contrib/build-perf-test.sh: add branch name and sizes to resultsStefan Stanacar1
Be more descriptive about the revision we are running on in the global results file: add branch:commit and git describe fields. Also add the sizes for tmp dir not only times. (previously these were only available in the output.log) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-10ddimage: fix incompatibility with dashHongxu Jia1
On systems with dash as /bin/sh there were failures while invoking ddimage. Fix to let it work with both bash and dash shells. [YOCTO #4617] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02mkefidisk: Unmount after partitioningDarren Hart1
Some automounters are rather overzealous and like to mount things immediately after partitioning. This can happen if the disk is being reused and the partitions align exactly with the existing partitions which have already been formatted. Move the unmount code into a function and call it before and after partitioning. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: change the global results formatStefan Stanacar1
When all builds have finished write the hostname, commit and times on a single line in the global results file (useful for merging later on files from multiple systems). Also the final cleaning should be last after writing the results. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: skip network sanity testsStefan Stanacar1
When your proxy/network connection is unstable the network sanity test which runs before every build (because we wipe all the files in the build dir) can influence build time. Appending CONNECTIVITY_CHECK_URIS = "" in local.conf will disable the check. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: use the same identation everywhereStefan Stanacar1
Some functions didn't used the same identation as the rest of them, let's fix that. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29mkefidisk: Attempt to automatically unmount target deviceDarren Hart1
With automounters abounding it makes more sense to attempt to unmount the device rather than abort, just like ddimage does. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04python: adding missing runtime dependency python-io to python-pprintLukas Bulwahn1
When trying to import python-pprint on a minimal image, it reports that the cStringIO python module is missing. This is provided with python-io, so we add python-io as runtime dependency. The complete observed trace was: Python 2.7.3 (default, Apr 4 2013, 07:45:36) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pprint Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/pprint.py", line 40, in <module> from cStringIO import StringIO as _StringIO ImportError: No module named cStringIO Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29scripts/contrib/build-perf-test.sh: add timings for bitbake -pStefan Stanacar1
Add another test to time bitbake -p with and without cache/ or tmp/cache. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29scripts/contrib/build-perf-test.sh: add option to allow cherry-picking of ↵Richard Purdie1
fix revisions Adds a -p option to allow cherry-picking of fix revisions. Removes the final build/sstate directories to stop running out of space. Runs subsequent tasks even if one test fails. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29scripts/contrib/build-perf-test.sh: add a global results fileStefan Stanacar1
Append results from each run to a single file in order to keep a history. Also do some cosmetic changes and fix some whitespace. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29scripts/contrib/build-perf-test.sh: add a script for build performance trackingStefan Stanacar1
This script runs a series of builds (core-image-sato by default) with and without sstate cache and collects some metrics (time and size currently). It takes a commit as argument (-c <rev>) and measures wall clock for bitbake core-image-sato and virtual/kernel. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Use msdos partition tablesDarren Hart1
While GPT works fine when writing to actual media, it cannot be reliably used for distributing disk images as it requires the backup table to be on the last block on the device, which of course varies from device to device. Use MSDOS tables instead. Use mkfs to label the filesystems as msdos tables do not support partition labeling. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Remove startup.nshDarren Hart1
Most firmware implementations use the EFI specified EFI/BOOT/bootia32.efi (and similar) boot paths. Only broken firmware uses different paths for removable media. In those cases, the user can add their own startup.nsh. For the compliant case, selecting "Shell" from the EFI boot menu should go to the shell. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Always use rootwait and document kernel parameters usedDarren Hart1
Without a reliable way of knowing if the target device with be an asyncronous block device on the target (MMC or USB), err on the side of caution of always specifcy "rootwait", ensuring the kernel will wait for the device to appear and not abort if it hasn't appeared in time for mount. Document the remaining kernel parameters added by this script on the same line as rootwait. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Boot with ro kernel parameter instead of rwDarren Hart1
There is no need to boot with "rw". Booting with "ro" will allow for fsck to be run during boot, and a proper /etc/fstab will still ensure the rootfs is "rw" by the time the user can interact with the system. Change the "rw" to "ro" in the kernel parameters specified in the generated grub.cfg file. Fixes [YOCTO 4036] mkefidisk.sh hardcodes 'rw' as root mount option Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Cleanup comment lengthDarren Hart1
Keep comments under 80 characters in length. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22mkefidisk: Always specify a root= kernel parameterDarren Hart1
The current script only replaces an existing root= kernel parameter which can result images created without a root= paremeter, even though the script expects a target rootfs parameter. Rather than replacing the root= parameter, delete the root= parameter if it exists, then append an appropriate root= parameter. Fixes [YOCTO 4035] mkefidisk.sh forgets to add root= parameter Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18mkefidisk.sh: create a proper ESPKoen Kooi1
The script was creating a FAT fs with EFI files in it, but wasn't setting the GPT GUID. Using 'gummiboot install' natively failed because of the missing GPT GUID, so fix that. While we're there also set the name to "EFI System Partition". Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-09mkefidisk.sh: Cope with translations and modelnames with 'Disk' in it.Koen Kooi1
The script greps for 'Disk', which doesn't work when your crazy Dutch distro has parted call it 'Schijf', so force LANG=C. The second problem is that 'Disk' might be a substring in the Model entry: [root@Angstrom-F16-vm-rpm contrib] # parted /dev/sdc unit mb print Model: SanDisk SDDR-113 (scsi) Disk /dev/sdc: 3905MB Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-14Python: Add missing dependency "textutils" to "io" packageMiLo1
Modify the include file and script to generate a missing RDEPENDS. Install python on target with python-io. Import ssl: Python 2.7.3 (default, Feb 9 2013, 16:04:35) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import ssl Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/ssl.py", line 58, in <module> ImportError: No module named textwrap Installing python-textutils solves the issue. Signed-off-by: MiLo <milo-software@users.sourceforge.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-21bb-matrix: Fix min and max calculationsDarren Hart2
The BB and PM ranges were originally intended to use leading 0s to ensure all the values were the same string length, making for nice log filenames and columnar dat files. However, not everyone will do this - especially if it isn't documented. Document the intent. Make the generation and parsing of dat files robust to either method. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-12-25python: add -crypt as a dependency on -mathRoss Burton1
random.py imports hashlib, so add this missing dependency. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-12-11documentation-audit.sh: Add/fix checks for skipped lines.Robert P. J. Day1
Have the script skip: * "Recipe" lines. * Lines with 11 "=", not 12. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20mkefidisk.sh: Add script to do an EFI install on the hostDarren Hart1
Sometimes it is convenient to prepare a bootable image from the host rather than using a live-image to install to a disk on the target. This script takes a live image as input, partitions a device, and performs the installation just as the installer would if run on the target. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20Replace "echo -e" with "printf" to have the same behavior in dash or bashAndrei Gherzan1
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define any options and furthermore allows 'echo -e' to be the default behavior. This means that in dash 'echo -e' will actually print '-e' and interpret backslashes by default. We use instead 'printf' builtin command with or without '\n' to simulate 'echo -e' or 'echo -n'. 'printf' needs format while 'echo' can be used without any arguments. So 'echo >' was replaced by 'printf "" >'. 'echo' without '-n' flag adds a new line by default so to keep the same behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is used. [YOCTO #3138] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-03Rename task to packagegroupPaul Eggleton1
"Package group" is a much more appropriate name for these than task, since we use the word task to describe units of work executed by BitBake. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-06-05generate-manifest-2.7.py: replace os.popen with os.unlinkRobert Yang1
The os.popen function would fail (more or less) silently if the executed program cannot be found, and here what we need is os.system not os.popen since it doesn't use the return value, use os.unlink() and ignore exceptions from it would be better as Chris suggested. [YOCTO #2454] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-04-11python: multilib header support.Lianhao Lu1
Add intercept multilib header for pyconfig.h in python. This is part of the bug fixing [YOCTO #2216]. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-03-26python: fix packaging dependencies on minimal systemsGary Thomas1
If you install the top-level python package only on a minimal system which has no other python packages installed then python is not functional at all. Without any extra packages installed this error is seen: # python Traceback (most recent call last): File "/usr/lib/python2.7/site.py", line 64, in <module> import traceback ImportError: No module named traceback Installing python-lang only partly fixes the problem as this error still exists: # python Traceback (most recent call last): File "/usr/lib/python2.7/site.py", line 569, in <module> main() File "/usr/lib/python2.7/site.py", line 551, in main known_paths = addusersitepackages(known_paths) File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages user_site = getusersitepackages() File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages user_base = getuserbase() # this will also set USER_BASE File "/usr/lib/python2.7/site.py", line 243, in getuserbase USER_BASE = get_config_var('userbase') File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var return get_config_vars().get(name) File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars import re ImportError: No module named re Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-03-22ddimage: Add script for writing images to boot mediaDarren Hart1
Fixes [YOCTO #1806] Standard practice is to use the Linux "dd" command to write images to boot media. This can be error prone and the results of sloppy usage can be disastrous. Locating the device you want to use is a clumsy process, especially on a headless build system. The ddimage script does the following: o Check the image and device exist o Check the device is writable o Compare the device to a blacklist and abort if it's listed Blacklist defaults to "/dev/sda" o Display useful identifying information about the image and device o Prompt the user before commencing the write The output looks something like this: $ sudo ~/bin/ddimage tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg /dev/sdk Image details ============= image: `tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg' -> `core-image-sato-fri2-noemgd-20111202214038.hddimg' size: 318568448 bytes modified: 2011-12-02 13:45:05.298897861 -0800 type: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 16, root entries 512, Media descriptor 0xf8, sectors/FAT 152, heads 64, hidden sectors 32, sectors 622204 (volumes > 32 MB) , serial number 0x4ed946e0, label: "boot ", FAT (16 bit) Device details ============== device: /dev/sdk vendor: Kingston model: DT 101 G2 Write tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg to /dev/sdk [y/N]? y Writing image... 303+1 records in 303+1 records out 318568448 bytes (319 MB) copied, 53.6766 s, 5.9 MB/s Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Dexuan Cui <dexuan.cui@intel.com> CC: Joshua Lock <josh@linux.intel.com> CC: Kishore K Bodke <kishore.k.bodke@intel.com>
2012-03-14scripts/contrib/python/generate-manifest-2.7.py: Catch up with staticdev fixesRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-01-24documentation-audit.sh: remove COMMERCIAL_LICENSE warningTom Zanussi1
COMMERCIAL_LICENSE no longer exists; the equivalent functionality is now has been replaced by LICENSE_FLAGS_WHITELIST, so replace the COMMERCIAL_LICENSE warning with a similarly equivalent warning. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
2011-11-07python: improve packagingMartin Jansa1
* move 2to3 to separate package and include lib2to3 (was in python-misc) * fix pattern for python-unittest (was in python-misc because it's in subdirectory now) * add pydoc_data to python-pydoc (was in python-misc) * add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime, pickle, stringold, xmlrpc * move all FILES_ details from python recipe to manifest generator so it's in one place * added manual line break in FILES_${PN}-core, because git send-email doesn't like too long lines $ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2 fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-10-31documentation-audit.sh: script for auditing documentation build statusScott Garman1
This script is used to enumerate which recipes are building documentation. It does this by checking that a -doc package gets generated and contains files. The script works by building each recipe using the output from bitbake -s. It will generate several report files, listing which recipes include documentation, which are missing documentation, and which did not successfully build at all. Signed-off-by: Scott Garman <scott.a.garman@intel.com>
2011-10-31update python 2.7 manifestNitin A Kamble1
script: add needed files into the python-core package regenerate python-2.7-manifest.inc file with newer script Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-10-31python: update generate-manifest for 2.7 version and regenerate itMartin Jansa1
* it needs to be regenerated to actually package something Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-07-20scripts/contrib: add build time regression test scriptPaul Eggleton2
test_build_time.sh is a bash script intended to be used in conjunction with "git bisect run" in order to find regressions in build time, however it can also be used independently. It cleans out the build output directories, runs a specified worker script (an example is test_build_time_worker.sh) under TIME(1), logs the results, and returns a value telling "git bisect run" whether the build time is good (under the specified threshold) or bad (over it). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-07-14bb-matrix: correct BB and PM number canonicalizationDarren Hart1
The bash string operation ${BB##*0} was greedy and in addition to converting "02" to "2", also converted "20" to "", causing all builds for a BB value ending in 0 to run with BB_NUMBER_THREADS=1. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 09:24:55 +0000