summaryrefslogtreecommitdiff
path: root/scripts/contrib
AgeCommit message (Collapse)AuthorFiles
2014-09-03scripts/contrib/build-perf-test: Update eglibc -> glibcRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23mkefidisk.sh: Add signal handlingDarren Hart1
Add basic signal handling to unmount and remove any temporary files. Correct a quoting issue with the die() function caught testing signal handling. Fix a minor typo in "formatting" output. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23mkefidisk.sh: Fix redirection to 1Darren Hart1
The current script intends to redirect stderr to stdout, but instead redirects to a file named 1. No doubt a regex replace error. Replace all instances of 2>1 with 2>&1. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23mkefidisk.sh: Remove initrd entry for gummibootDarren Hart1
My previous patch adding gummiboot support was missing the line to remove the initrd line from the boot config. This was an oversight in copying over the grub setup to gummiboot. Add the necessary logic to remove it. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Reduce output and add verbose flagDarren Hart1
Remove superfluous output from commands, add a -v verbose flag, and cleanup output. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Make the rootfs copy the last stepDarren Hart1
Copying the rootfs is the most time intensive task. Move it last so if we are to encounter other errors, we do so quickly and error out. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add die() and cleanup() routinesDarren Hart1
Currently the script will attempt to continue even after a fatal error. Add a die() routine which will abort in the case of a fatal error and call a cleanup() routine to unmount any images or devices and remove the TMPDIR. Move the variable assignment and directory creation earlier in the script, making it more obvious what we need to clean up. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Improve loggingDarren Hart1
Add logging functions: error, warn, info, and success, using tput to add color highlighting. Use these routines throughout the script, replacing echo statements and adding "|| error" in several places to eliminate silent failures. Add a simple exit block which checks for issues encountered while running. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Copy the EFI dir recursivelyDarren Hart1
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir recursively. This allows for custom configurations to be enabled implicitly with no extra work required. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add gummiboot supportDarren Hart1
Fixes [YOCTO 6295] Add gummiboot support for images built using: EFI_PROVIDER="gummiboot" Add conditional configuration for GRUB and gummiboot. Provide some messaging about which is being performed. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Add mount error checkingDarren Hart1
Provide reasonable feedabck if the mount commands fail. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19mkefidisk.sh: Use all caps for volume namesDarren Hart1
Avoid some mkfs warnings by using all caps in the volume names. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-03scripts/contrib/verify-homepage.py: add a script to verify HOMEPAGEChong Lu1
Add a script to verify all the recipes' HOMEPAGE. [YOCTO #5689] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-25list-packageconfig-flags: improve option parsingPaul Eggleton1
* Use optparse instead of getopt (less code & automatic help) * Change help text / output to use "recipe" instead of "package" * Print something to indicate the script is still gathering information Note that the long options have been renamed as appropriate. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-06-25list-packageconfig-flags: filter out doc and defaultval varflagsPaul Eggleton1
These are generic flags and shouldn't be listed in the output of this script. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-06-25scripts: consolidate code to find bitbake pathPaul Eggleton1
Several of these scripts were using duplicated code (and slightly different methods) to find the path to bitbake and add its lib subdirectory to the Python import path. Add some common code to do this and change the scripts to use it. Fixes [YOCTO #5076]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-06-24mkefidisk.sh: Allow symlink for deviceDarren Hart1
Allow the user to specify a symlink as the host device. If a link is used, mkefidisk will now dereference it and use the link target when looking for sysfs information. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06generate-manifest-2.7.py: Add importlibMatt Fleming1
importlib isn't currently included in any of the python packages, so create a new one for recipes that require it. Cc: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06generate-manifest-3.3.py: Add importlibMatt Fleming1
importlib isn't currently included in any of the python packages, so create a new one for recipes that require it. Cc: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-28ddimage: Support Mac OSDarren Hart1
Update the ddimage script to allow it to work on Mac OS too. The biggest difference is sysfs vs diskutil and in the syntax of the stat command between Mac OS and Linux, unfortunately. Workarounds using ls, cut, and columns got really fragile really quickly. Relying on stat and switching on uname seemed the more robust solution. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30scripts/contrib/dialog-power-control: add a trivial power prompt scriptPaul Eggleton1
If you want to do automated hardware testing but don't have a controllable power strip this script can be useful so that you know when you need to cycle the power. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-30scripts/contrib/serdevtry: add script to handle transient serial terminalsPaul Eggleton1
When running automated tests (or just generally interacting with) boards whose serial console devices are on the board itself and thus disappear when powered down or practically disconnected, such as the BeagleBone white, some terminal programs (e.g. picocom) will exit when the device disappears and need to be restarted after the serial device returns. This script handles this automatically for such terminal programs. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21python3: sync module dependencies from 2.7Paul Eggleton1
These have been added recently to 2.7 but were missing in the 3.3 script/inc file. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-03-21generate-manifest-3.3.py: sync descriptions with 2.7 versionPaul Eggleton1
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-03-21generate-manifest-2.7.py: sync with python-2.7-manifest.incPaul Eggleton1
Some changes were made earlier by me to SUMMARY values in python-2.7-manifest.inc without changing the manifest script. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21generate-manifest-*.py: set SUMMARY instead of DESCRIPTIONPaul Eggleton2
Typically what's being set here is a short description, so it makes much more sense to set SUMMARY. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21python: add python-mmap to python-multiprocessing RDEPENDSPaul Eggleton1
The multiprocessing module needs the mmap module. We got away with not having this for the build appliance because python-mmap was added to packagegroup-self-hosted, but this is the proper place to have it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-02generate-manifest-3.3.py: Add script to generate python 3.3 manifestsKhem Raj1
Bases on python 2.7.x generator Package collections/ in python-core Signed-off-by: Khem Raj <raj.khem@gmail.com>
2013-12-18scripts/contrib: Add graph-toolPaul Eggleton1
A simple script I put together for getting the paths from one node to another in a dot graph. This is useful for example in working out why a particular recipe is getting built in conjunction with dot graph files produced by bitbake -g. For example: $ bitbake -g core-image-minimal ... $ graph-tool find-paths pn-depends.dot core-image-minimal util-linux core-image-minimal -> packagegroup-core-boot -> udev -> glib-2.0 -> python-dbus -> dbus-glib -> dbus -> libsm -> e2fsprogs -> util-linux core-image-minimal -> packagegroup-core-boot -> udev -> glib-2.0 -> python-dbus -> dbus -> libsm -> e2fsprogs -> util-linux core-image-minimal -> packagegroup-core-boot -> udev -> util-linux Partially addresses [YOCTO #3362]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-06python: Add missing RDEPENDS for python-unittestMike Looijmans1
After installing python-unittest, the following errors occur when executing "import unittest" from a python commandline: ImportError: No module named StringIO ImportError: No module named pprint ImportError: No module named difflib ImportError: No module named pprint ImportError: No module named fnmatch Fix this by adding the missing dependencies to the generator script and run the generator. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30mkefidisk.sh: Allow using a loopback mounted fileJason Wessel1
It should be possible to generate a disk to a file using a loopback device with mkefidisk.sh, which is useful for booting simulators. To make this possible the partitions for the loop back need to work similarly to the mmc devices. The mkfs.vfat also requires and additional argument to force it to write to something other then a real disk. Example: qemu-img create -f raw bigdisk 4G dev=`sudo losetup -f` sudo losetup $dev bigdisk mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda sudo losetup -d $dev Note: Also a bug was fixed in the mkefidisk.sh where if the disk you are writing to initially has an invalid label the size of the first partition will be computed incorrectly. For the simulator disk creation this is generally always the case, but this can happen with real hardware as well. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-14scripts/contrib/build-perf-test.sh: record size in kb and remove extra spacesStefan Stanacar1
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-12bb-matrix-plot: Use interpolation for sparse dataPeter Kjellerstedt1
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16" and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by default looks very jagged due to the missing data points. By using splines to interpolate the missing data the graph looks a lot better. This should not change graphs where all data points are available in any way, only improve sparse graphs. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-12bb-matrix: Clean before, rather than after, buildingPeter Kjellerstedt1
This makes sure the the first build starts from a clean state. Otherwise one could have the first build affected by any leftover state from a previous build. This also leaves a working state behind after the final build. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30list-packageconfig-flags.py: fix searching bitbake module failedHongxu Jia1
Run list-packageconfig-flags.py on wrlinux's platform in which the oe-core layer and bitbake layer in different directories: ---- ../layers/oe-core/scripts/contrib/list-packageconfig-flags.py Traceback (most recent call last): File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module> import bb.cache ImportError: No module named bb.cache ---- The script import bb module from bitbake lib dir, the previous lib dir was hardcode and only worked on poky but not for others. In this situation, look for bitbake/bin dir in PATH could fix this issue. [YOCTO #5060] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26python-2.7-manifest: Add missing python-ctypes dependency to ↵Richard Purdie1
python-multiprocessing Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-05list-packageconfig-flags.py: add a script to list all PACKAGECONFIG flagsHongxu Jia1
- This script will list available pkgs which have PACKAGECONFIG flags. - If option '-f' is used, it will list available PACKAGECONFIG flags and all affected pkgs. - If option '-a' is used, it will list all pkgs and PACKAGECONFIG information - If option '-p' is used, it means list the pkgs with preferred version EXAMPLE: list-packageconfig-flags.py PACKAGE NAME PACKAGECONFIG FLAGS ============================================================== alsa-tools-1.0.26.1 defaultval gtk+ avahi-ui-0.6.31 defaultval python bluez4-4.101 alsa defaultval pie list-packageconfig-flags.py -f PACKAGECONFIG FLAG PACKAGE NAMES ==================================== 3g connman-1.16 avahi cups-1.6.3 pulseaudio-4.0 beecrypt rpm-5.4.9 rpm-native-5.4.9 list-packageconfig-flags.py -a ================================================== gtk+-2.24.18 /home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb PACKAGECONFIG x11 PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS} xf86-video-intel-2.21.9 /home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb PACKAGECONFIG None PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc PACKAGECONFIG[sna] --enable-sna,--disable-sna [YOCTO #4368] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05scripts/contrib/mkefidisk.sh: fix bashismChen Qi1
Remove the function keyword. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18scripts/contrib/*: fix arithmetic bashismPaul Eggleton2
Apparently $[...] isn't valid in dash, so use $((...)) instead for mkefidisk.sh and ddimage that both start with $!/bin/sh. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-28python-multiprocessing: adding runtime dependenciesLukas Bulwahn1
As python-multiprocessing requires python-threading and python-pickle, this commit adds them as runtime dependency. The observed behavior was: When typing 'import multiprocessing' in the python shell on a minimal image with only the python-multiprocessing recipe installed, python reports at first: Python 2.7.3 (default, Jun 27 2013, 08:26:25) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import multiprocessing; Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module> from multiprocessing.util import SUBDEBUG, SUBWARNING File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module> import threading # we want threading to install it's ImportError: No module named threading After adding python-threading as runtime dependency and rebuilding the image, python reports: Python 2.7.3 (default, Jun 27 2013, 08:26:25) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import multiprocessing; Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module> import _multiprocessing ImportError: No module named cPickle Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-13scripts/contrib/build-perf-test.sh: fix passing argumentsStefan Stanacar1
Don't pass arguments to bitbake as a single one, because this will break when the bitbake double-exec is removed. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-13scripts/contrib/build-perf-test.sh: add branch name and sizes to resultsStefan Stanacar1
Be more descriptive about the revision we are running on in the global results file: add branch:commit and git describe fields. Also add the sizes for tmp dir not only times. (previously these were only available in the output.log) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-10ddimage: fix incompatibility with dashHongxu Jia1
On systems with dash as /bin/sh there were failures while invoking ddimage. Fix to let it work with both bash and dash shells. [YOCTO #4617] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02mkefidisk: Unmount after partitioningDarren Hart1
Some automounters are rather overzealous and like to mount things immediately after partitioning. This can happen if the disk is being reused and the partitions align exactly with the existing partitions which have already been formatted. Move the unmount code into a function and call it before and after partitioning. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: change the global results formatStefan Stanacar1
When all builds have finished write the hostname, commit and times on a single line in the global results file (useful for merging later on files from multiple systems). Also the final cleaning should be last after writing the results. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: skip network sanity testsStefan Stanacar1
When your proxy/network connection is unstable the network sanity test which runs before every build (because we wipe all the files in the build dir) can influence build time. Appending CONNECTIVITY_CHECK_URIS = "" in local.conf will disable the check. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29scripts/contrib/build-perf-test.sh: use the same identation everywhereStefan Stanacar1
Some functions didn't used the same identation as the rest of them, let's fix that. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29mkefidisk: Attempt to automatically unmount target deviceDarren Hart1
With automounters abounding it makes more sense to attempt to unmount the device rather than abort, just like ddimage does. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-04python: adding missing runtime dependency python-io to python-pprintLukas Bulwahn1
When trying to import python-pprint on a minimal image, it reports that the cStringIO python module is missing. This is provided with python-io, so we add python-io as runtime dependency. The complete observed trace was: Python 2.7.3 (default, Apr 4 2013, 07:45:36) [GCC 4.7.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pprint Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/pprint.py", line 40, in <module> from cStringIO import StringIO as _StringIO ImportError: No module named cStringIO Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29scripts/contrib/build-perf-test.sh: add timings for bitbake -pStefan Stanacar1
Add another test to time bitbake -p with and without cache/ or tmp/cache. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 02:43:19 +0000