| Age | Commit message (Collapse) | Author | Files |
|---|
|
This patch fixes:
weston/weston/latest lost dependency on libwebp
weston/weston-examples/latest lost dependency on libwebp
from:
http://lists.openembedded.org/pipermail/openembedded-core/2014-June/093704.html
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Announcement:
http://lists.freedesktop.org/archives/cogl/2014-July/001689.html
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixed the race issue:
util-macros.do_package failed: 'getpwnam(): name not found: root'
The error happens when there is a half etc/passwd, fixed by:
$ install usr/share/base-passwd/passwd.master etc/passwd.master
$ mv etc/passwd.master etc/passwd
The "mv" is atomic which will fix this problem.
[YOCTO #6124]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Make KERNEL_IMAGE_MAXSIZE and IMAGE_ROOTFS_SIZE have the same algorithm:
- Use Kbytes as the unit since we use this in other codes.
- Use "du" rather than "ls" to figure out the size since we use this in
image.py.
[YOCTO #2610]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently, given a list of rdepends its near impossible to figure out
which ones are potentially invalid and which might be an RPROVIDES of a
package.
This problem is simple to solve, we can write lookup data into the
pkgdata. This patch does that, accounting for the fact that multiple
packages can RPROVIDE the same thing (particularly with locales). Its
done with symlinks so the performance overhead is minimal.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its possible to run the package QA checks as a separate task rather than
as part of the do_package task. This offers more parallelism but the
fact that made me propose this is that ideally we'd like to access
pkgdata to help add new tests and to do that, we need to run later in
the task list. We also need to add in RDEPENDS to the task which apply
to do_package_write_* but not do_package. See the subsequent patches
for why this is desireable.
If we split into a separate task, we need to add in calls to read
the sub package data, build the cache structure used by do_package and
cover the task with sstate (which is empty and just acts as a stamp
saying it passed package QA). We also need to handle our own
dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change the do_package shlibs code to account for RPATHS. This means that
for library dependency purposes, only libraries in system paths or in
any declared RPATH will be seen. This is important to resolve problems
people have been having where similarly named libraries in "private"
paths were conflicting, e.g. with gstreamer.
For now this code assumes the default search path is libdir and
base_libdir and places ASSUME_SHLIBS in libdir so they are searched by
default.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of having a .list file and a .ver file, place the version
information into the .list file in a ":" delimited string.
Also place the path to the library here, this can then be used to
evaluate RPATHs in the shlib dependency code.
Since the disk format has changed, the easiest way to avoid build
failures in the same TMPDIR is to change the shlibs directory to
shlibs2. sstate dependency code with ensure everything rebuilds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to do more advanced processing of the shared libraries, we need
to know where a given library is located on disk so we can know whether
its a system path or a private directory for example.
This patch adds this information into the 'sonames' data structure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve the shlibs 'needed' data structure to include the file and
any rpath information. This allows various cleanups to the data structure
and moves us closer to being able to resolve shlibs providers issues
based on path in due course.
This commit doesn't change any stored data, just cleans up internal data
structures (for example dropping the needed_from dict).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To quote "Maxin B. John" <maxin.john@enea.com>:
git version 1.7.8 added the --list option to git-branch. Since we depend on this
option in git.py, the minimum requiremnt for git should be updated to Git
1.7.8+
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "--spider" argument to wget command, since we don't need to download
repo page, just check that it is there.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should check the result of updating opkg rather than echo_info.
So we should call check_result function after updating opkg.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to check YOCTOADT_QEMU variable whether is equal to "y".
So we should use "==" rather than "=".
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
YOCTOADT_VERSION is not included in adt_installer.conf file.
Remove this variable, because we don't need it.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To avoid syntax errors when inheriting this class without setting BINCONFIG, add
a default value and a comment.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a PACKAGECONFIG for xshmfence. If DRI3 is enabled, xshmfence also needs to
be enabled.
[ YOCTO #6507 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The automatic detection of libunwind causes non-deterministic builds, so add a
PACKAGECONFIG option for it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bug fixes;
Features parity with Bluedroid and additional
support for Bluetooth 4.1 core technology and
upgraded profiles including HFP 1.6 + Wideband speech,
A2DP 1.3, AVRCP 1.5 and MPS;
It also provides full integration for aptX(R)
high-quality low-latency codec from CSR (codec license not included).
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
librsvg is the only recipe depending on libcroco, which doesn't refer to
croco-6.0-config any more, so we inherit binconfig-disabled here to
disable it.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of hard-coding PAM/xattr on for target and off for native, slightly
abuse PACKAGECONFIG to add options (and pass them to make in do_compile).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bindir is transfered to Makefile as ${D}${bindir}, hence it should not
use DESTDIR as the prefix directory any more during the install.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable the rpm-5_4 branch via a specific recipe to help track the latest
community development. This should allow us to more quickly move to the next
release when it is available.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building target packages, HOST_OS and TARGET_OS are the same, as is the
VENDOR field. However, when building an SDK this is not true. The patch
corrects the oversight and switches to using the 'HOST' version and resolves
the issue of meta-mingw not working w/ the rpm packaging.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update various patches. A few corrections to the patch descriptions,
otherwise simple quilt refresh or conflict resolution.
Remove rpm-solvedb.patch and rpm-respect-arch.patch. These are both related
to the old solvedb package dependency solver. This is no longer used since
we moved to smartpm.
rpm-stub-out-git_strerror was a backport and is no longer needed.
RPM 5.4.12 and newer normally requires Berkley DB 6.0 or newer. A small
patch to configure allows RPM to dynamically select DB 5.3 or DB 6.0 based
on what is available at configure time.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The latest version of RPM5 requires Berkley DB 6.0.20 or newer.
The license is now AGPL-3.0 in BDB 6.0. This may not be acceptable to some, so
the previous version is retained as an alternative.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed:
- The Copying has no change, except the company address.
- pick patches from debian
http://ftp.de.debian.org/debian/pool/main/p/perl/perl_5.20.0-1.debian.tar.xz
- Not used by oe:
deprecate-with-apt.diff
patchlevel.diff
fakeroot.diff
- Create/Update perl-rdepends_${PV}.inc by the hardcode script;
- Update config.sh by:
1) Copy the Perl 5.20.0 source code onto your TARGET machine
linux qemuarm 3.14.5-yocto-standard from OE-Core rev:
f506d0660c9949485268a92724ac770b5457b0ca
2) Execute sh Configure as normal and configure as required,
do not "make";
3) Compare with the old config.sh files, and update;
- perl-ptest.inc
1) Copy the souce code to ptest since almost 112 test cases
failed with the reason that no souce code found;
2) Add two patches to fix test case issue;
- perl-native
Reference perl (5.20.0-1) in debian to update perl shared library headers
https://packages.debian.org/experimental/i386/perl/filelist
Obsolete:
- 09_fix_installperl.patch
The dead code was removed from installperl
http://perl5.git.perl.org/perl.git/commit/236818e0b9d9fe874831086b4d0b94dc6f245dfd
- perl-build-in-t-dir.patch
The upstream has fix it. The issue description:
Perl cannot cross build in a path containing a directory that has the
name of "t". As an example, you can make the perl build fail with
"mkdir -p /tmp/build/t", go to the directory, unpack the sources,
configure and cross build.
- 0001-Fix-misparsing-of-maketext-strings.patch
as they are part of the upstream code now:
http://perl5.git.perl.org/perl.git/commit/1735f6f53ca19f99c6e9e39496c486af323ba6a8
- 0001-Prevent-premature-hsplit-calls-and-only-trigger-REHA.patch
the hash function changed:
http://perl5.git.perl.org/perl.git/commit/7dc8663964c66a698d31bbdc8e8abed69bddeec3
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Kexec-tools v2.0.7 is out, upgrade accordingly.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
CC: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump version to 4.0
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bump version to 3.3.5
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simple upgrade, the license checksum change is related to a copyright date
change.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use '${CCLD}' as '${LD}' which the cpan was doing.
...
i586-poky-linux-ld: unrecognized option '-Wl,-O1'
i586-poky-linux-ld: use the --help option for usage information
...
Also fix do_configure warnings
...
'--SYSROOT' is not a known MakeMaker parameter name.
'-MARCH' is not a known MakeMaker parameter name.
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, even if PAM is enabled for ssh, the daemon still tries to
authenticate an empty password. This leads to authentication failure
which would mess up with PAM modules.
As a result, if 'UsePAM', 'PermitEmptyPasswords' and 'PasswordAuthentication'
are enabled, no user can login correctly. We would meet the following error
message at the client side.
Write failed: Broken Pipe
This patch fixes the above problem by checking whether PAM is enabled before
authenticating an empty password. After all, if PAM is enabled, the task of
authenticating passwords should be handled to PAM modules.
[YOCTO #6466]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The only reference to this function is a commented-out assignment, and nothing
in oe-core nor meta-oe uses autotools_set_crosscompiling directly. As it's
unused, remove it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pkglibexecdir is a fairly common location for package-specific binaries (in
automake this is $libexecdir/$PACKAGE), and binaries in there are already
installed to FILES_PN, so add the corresponding .debug directory to
FILES_PN-dbg.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test suite is installed into ${libexecdir} and as that may be outside of
${libdir} the QA test needs to be silenced.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
that outputs test results in separate log file.
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Patch redhat-portability.diff was patching generated files.
This patch removes every hunk related to Makefile.in and configure files.
[YOCTO #6491]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
File: '/home/mhatle/git/oss/oe-core/meta/lib/oe/package_manager.py', lineno: 278, function: _pkg_translate_smart_to_oe
0274:
0275: if found == 1 and fixed_arch == fixed_cmp_arch:
0276: break
0277: #bb.note('%s, %s -> %s, %s' % (pkg, arch, new_pkg, new_arch))
*** 0278: return new_pkg, new_arch
0279:
0280: def _list_pkg_deps(self):
0281: cmd = [bb.utils.which(os.getenv('PATH'), "rpmresolve"),
0282: "-t", self.image_rpmlib]
Exception: UnboundLocalError: local variable 'new_arch' referenced before assignment
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Dropped libvorvis dependency because there is already a (better) builtin vorbis codec.
Don't confuse codec names: "vorbis" (builtin) and "libvorbis" (using external library).
Changes:
- add --enable-nonfree when faac or openssl are used
- add DESCRIPTION
- sort PACKAGECONFIG entries
Tested with libav-0.8.11 & libav-9.13.
Note: Be sure to have a recent version of bitbake (2014-06-11 or better) including this:
http://cgit.openembedded.org/bitbake/commit/?id=2e742c03e8dfdfa67899e7f5d579ed14bd87e139
It affects behavior of bb.utils.contains_any
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* building without x11 doesn't work, because it sets default
gdkbackend to x11 and then requires cairo-xlib to be available
* checking for CAIRO_BACKEND... no
configure: error: Package requirements (cairo-xlib >= 1.6) were not met:
No package 'cairo-xlib' found
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The previous change to adt_installer was incorrect, this reverts it and
fixes the real issue. The real issue is that if a previous installation was
present, it may have been moved and therefore the paths returned by opkg
could be a little odd.
To address this, when we move files to a different location, ensure we
update the *.list files with the revised paths. This means later installs
over the top return consistent values from opkg and the script works
as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we build a general toolchain script we should add all the OS
variants to PATH, not just the current one. This is because some can
cross reference each other and if the triplet prefixed ld can't be found
for example, you recieve strange errors.
Doing this resolves bugs exposed during SDK testing.
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a '\n' to the last line of the file to fix:
No newline at end of file
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For qemu-native, the pkg-config paths do not
include build host paths.
This is an issue for libsdl for example, where SDL is
used by qemu, but for qemu-native libsdl-native is not
built, but assumed to be provided by the build host.
Because pkg-config do not search for libsdl config files
on the build host sysroot, the configure stage of qemu-native
will fail because it will not find SDL as being installed.
Usually, the isssue is masked by a functional sdl-config that
will be interogated instead of pkg-config. However, on Build
Appliance, sdl-config is deliberately made non-functional,
so the issue manifests itself.
The fix will create an extended PKG_CONFIG_PATH, which does
include the build host sysroot paths for pkg-config.
Fix for [YOCTO #6495].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a hotkey for the GRUB 'test' menuentry. This can be used by expect scripts to boot into 'test' when doing runtime hardware tests.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
