| Age | Commit message (Collapse) | Author | Files |
|---|
|
The kernel boot process hangs when /proc/consoles doesn't exists, therefore
check the existence of /proc/consoles before executing pkg_postinst script.
Following is the log when /proc/consoles doesn't exist:
Running postinst /etc/rpm-postinsts/102...
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
done.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
INIT: no more processes left in this runlevel
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows BSPs for architectures with no thread support to set (for
example) "GCCTHREADS=no" without having to override all the other configure
parameters.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to pickup a couple of configuration tweaks that were done
as part of a bump to the 3.4 linux-yocto tree for the beagleboard.
In particular, this updates DVI and USB settings to enable the
perhipherals out of the box.
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the machine and meta SRCREVs to the latest 3.4.x -stable
release.
See git whatchanged v3.4.10..v3.4.11 for the full changelog.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When doing multilib builds rpm does not find libgcc1 for lib32
multilib because its not honoring the debian renaming scheme for
libgcc-multilib. Lets add MLPREFIX to fix it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The directory used as SBINDIR should be ${sbindir} not ${base_sbindir}.
Reported by Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake has the ability to request to run a command
and if it is not possible fall back to emitting a
log message. This can be used to start a screen
client automatically on the controling tty if
the UI has an interactive tty.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Passing the data store will be needed for firing a custom event
for the screen class.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These were not getting fixed by orignal committer!
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch has been causing some regressions on gold.
e.g. systemd based images segfault and uclibc based images
dont boot. There has been few other reports on the mailing
list. Considering this lets withdraw this patch.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
debugfs is another kernel virtual file system that should be mounted
if configured, so if it's configured into the kernel, mount it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
is disabled
If all postinsts have already been run during rootfs construction then
there's no point in having run-postinsts in the installed system.
Clean it up at the same time that update-rc.d and suchlike are being
removed.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Need to pass the path explicitly to "make install" to ensure that the binaries end up
in the right locations.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This gives a small but measureable performance improvement for
I/O heavy workloads.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It isn't supported to mix multilib and nativesdk in the same target, so
explicitly skip multilib processing if nativesdk is inherited. As a
bonus this fixes a bunch of related "missing file" warnings from the
file checksum code during parsing because BPN was not correctly stripped
for these targets.
Second half of the fix for [YOCTO #3146].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need MLPREFIX to be set so that oe.utils.prune_suffix() (as used for
the value of BPN) can derive the bare name from the multilib-extended
name for image recipes. BPN being set correctly avoids missing file
warnings during parse from the file checksum code for (unusual) images
that set SRC_URI, such as build-appliance-image.
First half of the fix for [YOCTO #3146].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't DEPEND on openssl but configure will try to use it if
pkg-config thinks it might be installed. This can lead to failing
and/or nondeterministic builds, so let's force it off.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use ${bindir} to locate the binary instead.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have been adding this option to paper over a bug in old toolchain
http://hardwarebug.org/2008/11/28/codesourcery-fails-again/
e.g. is one but these have been weeded out. Therefore let gcc
take the default vectorization optimizations
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping the meta SRCREV to pickup a newer emgd for the fri2 and
sys940x.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the lsbtest's list file that we can download the latest
sub-packages of LSB suite 4.1.0 and then run the test with them.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The configure script uses a hard-coded value for ${usrsbin_execdir},
which is the path that we know as ${sbindir}. Adjust configure to take
this from the environment if it's set there, and have do_configure()
pass it in.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bash-3.2.48 did not provide the linking from sh to bash, making it unusable.
Moving the license part out of the bash.inc file, and into bash_4.2.bb file makes
us able to use that file also for bash_3.2.48.bb, which makes maintaining both
at the same time a lot easier.
Signed-off-by: Martin Ertsaas <mertsas@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed if installation is done in a directory that needs root
privileges.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids the SVN or git fetcher issues for gcc
and the tar is mirrored around the world so it will
not be slow
Fixes [YOCTO #2908]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The globs used for STAMPCLEAN were too greedy matching gcc-cross-initial
stamps for gcc-cross for example. This patch resolves that problem making
the assumption that PV starts with something numeric. This assumption
should hold in most cases and has a better failure case that the current
situation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Define an ALL_QA variable which can be used to determine which tests to
run. Improve the libdir test to work in the case it is set to raise an
error rather than a warning.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check in ${PKGD} for libraries in wrong locations.
Trigger a warning if so.
Eg. Catch recipe installing /lib/bar.so when ${base_libdir}="lib32"
or installing in /usr/lib64 when ${libdir}="/usr/lib"
[Yocto #2038]
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Updating the meta SRCREVs to pickup the following configuration change:
594994c meta: use profiling and latencytop features in yocto bsps
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch will allow one to run the installer from another directory
than the one where it's actually located.
Suppose the installer is in /home/user/test/my/sdk and the current
directory is in a different place. With this patch, one can run the
installer like this:
$ sh ~/test/my/sdk/poky-eglibc-x86_64-arm-toolchain-gmae-1.2+snapshot-20120920.sh
[YOCTO #3135]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The installer should be generic.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If the installation is done in a directory which already contains a
valid installation, opkg will not install anything and the moving the
contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will
throw some errors. However, the install directory will not be affected.
This patch will ensure that the /install/dir/opt/poky/1.2 exists.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When the cross canadian toolchains are installed, for different
architectures, they might contain common files. This leads to
installation failures since the opkg, by default, does not overwrite
files. This issue happens, for example, for binutils packages (that
contain the same locale files) or gdb (which installs some syscalls xml
files). The locale files could be removed from the binutils
cross-canadian package but we cannot do the same for the syscalls GDB
files which are used by GDB to display user friendly names for the
syscall numbers. Hence, the best solution is to force opkg to overwrite
these files.
[YOCTO #3109]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- include /usr/share/aclocal/intltool.m4 into the intltool
package (the files from intltool-dev must be included into the
main package, as intltool is a development tool)
- add missing rdepends: gettext-dev, libxml-parser-perl
[YOCTO #2597]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is for fixing the problem:
1) bitbake core-image-sato-sdk with MACHINE=qemux86
2) bitbake core-image-sato with with MACHINE=crownbay
The qemux86's PACKAGE_ARCH is i586, the crownbay's is core2, but several
i586 packages will be installed into crownbay's rootfs though there are
core2 packages. For example, there are:
xserver-xorg*_1.11.2-r7_i586.ipk
xserver-xorg*_1.9.3-r1_core2.ipk
The crownbay.conf says:
PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
What the crownbay's image needs is xserver-xorg*_1.9.3-r1_core2.ipk, but
the xserver-xorg*_1.11.2-r7_i586.ipk will be installed, this is
incorrect.
This is caused by opkg's selecting mechanism: when more than one
candidate is found, it will use the higher version one and ignore the
arch priority.
we have several conf files which set the PREFERRED_VERSION_pkg = "..." ,
but there is no such a mechanism which can let us tell the opkg to
install the preferred version. When the preferred version is higher,
this is OK, but if the preferred version is lower, there would be
problems:
1) Most of the packages are core2 in the image, but several of them are
i586, though we have built the core2 ones, this seems strange.
2) What's worse is that the image may not work since the preferred
version pkg is not installed.
We have set the arch priority clearly in the opkg.conf, I think that
respect to the arch priority is reasonable during the image generation.
Add the "--select-higher-version" option to let the user have another
choice, the default is no.
[YOCTO #2575]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is a simple upgrade. Dropping the unneeded patches
and adding --disable-werror to configure since thats is
what one of the patch was doing which was dropped.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* use SRCREV from opkg_svn.bb, because with 596 patches we have won't apply
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* it was triggered by c02364f36e228835ea5d7fd4e1d347fd451f8544 when new package had 2 entries in Provides and old version just 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
