summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2017-04-05libnewt: replace fedorahosted.org SRC_URI with pagure.io sourceChoong YinThong1
fedorahosted.org was retired on March 1st, 2017. This is to update the SRC_URI to point to pagure.io. pagure.io is a replacement for fedorahosted. [YOCTO #11226] Signed-off-by: Choong YinThong <yin.thong.choong@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-05libuser: replace fedorahosted.org SRC_URI with pagure.io sourceChoong YinThong1
fedorahosted.org was retired on March 1st, 2017. This is to update the SRC_URI to point to pagure.io. pagure.io is a replacement for fedorahosted. [YOCTO #11226] Signed-off-by: Choong YinThong <yin.thong.choong@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-05xmlto: replace fedorahosted.org SRC_URI with pagure.io sourceChoong YinThong1
fedorahosted.org was retired on March 1st, 2017. This is to update the SRC_URI to point to pagure.io. pagure.io is a replacement for fedorahosted. [YOCTO #11226] Signed-off-by: Choong YinThong <yin.thong.choong@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-05runtime/dnf : Add ID to the dnf test casesJose Perez Carranza1
Add the corresponding Testopia ID to the test cases for dnf Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05gpgme: fix configure if 'import distutils' causes output on stderrRoss Burton2
There are a number of reasons that importing a module could cause output on stderr that isn't a fatal error (compatibilty problems with inputrc, or encoding warnings) so backport a patch from autoconf-archive to only check the exit code instead of asserting that stderr is empty. [ YOCTO #11231 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05selftest/devtool: use kernel provider instead of recipe allowing other ↵Leonardo Sandoval1
kernel providers To generalize the unit test for other kernel providers, use virtual/kernel instead of linux-yocto, allowing to run the selftest on non-poky distros, i.e. poky-tiny. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05selftest/commands: extend variable regex to include A_B variable notationLeonardo Sandoval1
This change allows quering for variables with the format A_B, i.e. PREFERRED_PROVIDER_virtual/kernel instead of just A. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05x86-base.inc, qemuarm.conf: prefer 4.10 version of linux-yoctoMartin Jansa2
* 4.8 version was removed in: commit 466e6e45ca04a07ebe1b1f52de747f077b362d54 Author: Bruce Ashfield <bruce.ashfield@windriver.com> Date: Tue Mar 28 08:58:07 2017 -0400 linux-yocto: drop 4.8 recipes We have 4.1 (LTSI), 4.4 (LTS), 4.9 (LTS/LTSI) and 4.10 available in master. 4.8 is no longer required, so we drop the recipe to keep the version selection under control. * causing each build to start with 188 lines of this stuff: NOTE: preferred version 4.8% of linux-yocto not available (for item virtual/kernel) NOTE: versions of linux-yocto available: 4.1.38+gitAUTOINC+7140ddb86e_4d2c95e78c 4.10.5+gitAUTOINC+01f18cba44_b97dcd4f06 4.4.56+gitAUTOINC+271b0c8d51_01aaede0a2 4.9.17+gitAUTOINC+8b97a445fa_3ff3760c2a NOTE: preferred version 4.8% of linux-yocto not available (for item kernel-module-raid456) NOTE: versions of linux-yocto available: 4.1.38+gitAUTOINC+7140ddb86e_4d2c95e78c 4.10.5+gitAUTOINC+01f18cba44_b97dcd4f06 4.4.56+gitAUTOINC+271b0c8d51_01aaede0a2 4.9.17+gitAUTOINC+8b97a445fa_3ff3760c2a Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05kernel.bbclass: move in addtask kernel_link_images statement from ↵Ming Liu2
linux-yocto.inc Add kernel_link_images task in kernel.bbclass instead of adding it in linux-yocto.inc, or else the recipes inheriting kernel.bbclass might run into implicit dependency issues. Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05meta-ide-support: exclude this recipe from rm_workbrian avery1
The results of meta-ide-support are used by utilities like runqemu and runqemu-extract-sdk. Since the usr/bin that meta-ide-support creates is subsequently removed bu rm_work, we exclude this recipe from the rm_work list. [YOCTO #11119] Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05sanity: explain where TMPDIR is if we're telling the user to delete itRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05recipe_sanity: Drop now unused FILESDIRRichard Purdie1
FILESDIR is long dead and unreferenced pretty much anywhere now, drop these sanity references too. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-01automake: Adjust shebang lines to remove interpreter path hardcodeSerhii Popovych2
If build host perl (and other tools) is old and we use some kind of toolchain to provide recent perl/python/etc to the OE build we still locked to use build host perl due to hardcoded shebang lines in automake scripts. Behaviour was observed with Enterprise Linux 6 and devtoolset toolchain from SCL (Software Collections) used to provide recent version of perl (not provided with default buildtools-tarball). Pass /usr/bin/env perl in ac_cv_path_PERL configuration variables for class-native and class-nativesdk. Use patch to automake to replace -w option in shebang line with modern way to enable warnings on perl (i.e. "use warnings"). Also add nativesdk-autoconf to RDEPENDS to bring runtime dependencies inline with other targets. Note that ac_cv_path_PERL must be valid perl interpreter path since configure will check perl version and Flock implementation. It is not possible currently to use nativeperl from native sysroot because automake does not DEPENDS on perl-native (and doing so fails due to circular dependencies). Only possible solution is to overwrite shebangs with nativeperl somewhere at do_install() and update RDEPENDS for class-native. Or add perl symlinks to nativeperl in sysroot. For now it seems good to use perl found by /usr/bin/env from automake-native. Cc: XE-Linux <xe-linux-external@cisco.com> Signed-off-by: Serhii Popovych <spopovyc@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-01autoconf: Adjust shebang lines to remove interpreter path hardcodeSerhii Popovych3
If build host perl (and other tools) is old and we use some kind of toolchain to provide recent perl/python/etc to the OE build we still locked to use build host perl due to hardcoded shebang lines in autoconf scripts. Behaviour was observed with Enterprise Linux 6 and devtoolset toolchain from SCL (Software Collections) used to provide recent version of perl (not provided with default buildtools-tarball). Pass /usr/bin/env perl in ac_cv_path_PERL configuration variables for class-native and class-nativesdk. Use patch to autoconf to replace -w option in shebang line with modern way to enable warnings on perl (i.e. "use warnings"). Also add nativesdk-m4 and nativesdk-gnu-config to RDEPENDS to bring runtime dependencies inline with other targets. Note that ac_cv_path_PERL must be valid perl interpreter path since configure will check perl version and Flock implementation. It is not possible currently to use nativeperl from native sysroot because autoconf does not DEPENDS on perl-native (and doing so fails due to circular dependencies). Only possible solution is to overwrite shebangs with nativeperl somewhere at do_install() and update RDEPENDS for class-native. Or add perl symlinks to nativeperl in sysroot. For now it seems good to use perl found by /usr/bin/env from autoconf-native. Cc: XE-Linux <xe-linux-external@cisco.com> Signed-off-by: Serhii Popovych <spopovyc@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-01binutils: Detect 64bit mips target for goldKhem Raj2
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-01ncurses_6.0: Improve reproducibilityJuro Bystricky2
Build static libraries without the binutils "ar" -U option. This option deliberately breaks deterministic mode. The option seems to be a relic from 2015, intended as a workaround for some unspecified build problems. [YOCTO#11247] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-01python: remove stale link to "Python for Embedded Systems Site"Bob Cochran4
Reference url is a stale, non existent site that returns a 404, so get rid of it Change impacts both the manifest files and the scripts that generate the manifests Run the following from within recipes-devtools/python ../../../scripts/contrib/python/generate-manifest-2.7.py > python-2.7-manifest.inc ../../../scripts/contrib/python/generate-manifest-2.7.py -n > python-native-2.7-manifest.inc ../../../scripts/contrib/python/generate-manifest-3.5.py > python-3.5-manifest.inc ../../../scripts/contrib/python/generate-manifest-3.5.py -n > python-native-3.5-manifest.inc Signed-off-by: Bob Cochran <openembedded@mindchasers.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31dpkg: Add PACKAGECONFIG for liblzma and enable itRichard Purdie1
liblzma is part of xz and we already build it but configure it out. This makes no sense. Enabling it means we gain multithreaded compression and it speeds dpkg-deb up massively. It also removes the fork overhead of separate xz processes. Turning the existing config into a PACKAGECONFIG and turning it on by default therefore makes best use of what we have available. The manual RDEPENDS are no longer needed since it uses liblzma which is picked up by the shlibs code magically. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31kernel.bbclass: introduce INITRAMFS_IMAGE_NAMEMing Liu2
It defaults to ${INITRAMFS_IMAGE}-${MACHINE} if INITRAMFS_IMAGE is not empty. This allows the end users to be able to override the initramfs image name with a customized value. Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31base-files: resize only serial tty's in profileDaniel Díaz1
We don't want to run resize on non serial consoles. There's been an earlier attempt (6557787), so this builds upon that. The problem we're seeing is that if there is text buffered in the virtual console (like from a desperate user trying to enter login details), resize will get stuck while calling ioctl(tty, TCSETAW); Since serial consoles are named (not just numbered), this change limits resize's reach even further to run only on /dev/tty[A-z] (thus avoiding /dev/tty[0-9]). Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31lsb: Create ${base_prefix}/lib64 correctly when neededPeter Kjellerstedt1
There were two remaining cases that could end up creating /lib64 rather than ${base_prefix}/lib64. The difference matters when building with usrmerge. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31lsb: Avoid using double slashes in pathsPeter Kjellerstedt1
Use ${D}${var} rather than ${D}/${var} for variables where ${var} contains an absolute path. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31selftest/pkgdata: replace the glibc recipe allowing execution on non-poky ↵Leonardo Sandoval1
distros Replace the glibc recipe for zlib on unit tests, otherwise tests are restricted to glibc distros (poky). [YOCTO #10890] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31systemd: make vconsole a PACKAGECONFIG optionEnrico Jorns1
Allowing to remove the systemd-vconsole-setup package without specifying the --disable-vconsole configure option for systemd will make the system boot with the failure prompt | systemd-udevd[142]: failed to execute '/lib/systemd/systemd-vconsole-setup' '/lib/systemd/systemd-vconsole-setup': No such file or directory | systemd-udevd[96]: Process '/lib/systemd/systemd-vconsole-setup' failed with exit code 2. as the 90-vconsole.rules will still be installed with having a RUN+="/lib/systemd/systemd-vconsole-setup" in it that attempts to execute a non-existing binary. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31kernel.bbclass: fix a typoMing Liu1
In a addtask statement, do_strip should be strip. Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31wic: remove prepare_empty_partition_squashfsEd Bartosh1
There is not much sense in creation of empty squashfs partition. It's also not possible to create empty squashfs partition of specified size. Even more, prepare_empty_partition_squashfs method is absolutely broken. It raises exception when called and even its signature differs from the rest of of similar methods. It means that nobody uses it and it's safe to remove it. Removed prepare_empty_partition_squashfs method and testing of empty squashfs partition. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: test creation of msdos partitionEd Bartosh1
Added msdos partition to the .wks file in test_fs_types wic test case. [YOCTO #11137] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: fix incorrect fstypeEd Bartosh1
Fixed typo in wks content: squash->squashfs Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add test_image_bootpart_globbed test for wicEd Bartosh1
Test image-bootpart wic plugin with globbed value of IMAGE_BOOT_FILES variable to increase test coverage. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add kickstart_parser test caseEd Bartosh1
Added test_kickstart_parser test case to test wks parser options not yet covered by tests. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add wic test case test_fs_typesEd Bartosh1
Added wic test case to test all possible filesystem types for empty and not empty partitions. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31wic-tools: add btrfs-tools squashfs-tools to DEPENDSEd Bartosh1
Added btrfs-tools-native and squashfs-tools-native to DEPENDS as wic uses these tools to support btrfs and squashfs filesystems. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31volatile-binds: correct some errors reported by systemdJoe Slater1
systemd-tmpfiles-setup will fail at boot, so we suppress the default versions of etc.conf and home.conf. We also make sure that /var/{cache,spool} and /srv are writeable if they exist. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31oeqa/runtime/cases: Migrate underscore casesMariano Lopez2
There were two missing cases to be migrated to the new framework: _qemutiny and _ptest. qemutiny was straightforward. ptest on the other hand wasn't working even in previous releases; it has been migrated from smart to dnf, and how ptest packages are gathered to be installed, adapted to use unicode, and removed a lot of code that wasn't needed anymore. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31openssl: add a "openssl10" PROVIDESAlexander Kanavin1
In 2.4 development cycle openssl 1.1 will replace openssl 1.0 as the default openssl version. Openssl 1.0 will stay but will be renamed to openssl10, and eventually it will be removed (hopefully much sooner than the official end of support date of Dec 2019, as we do not want an unsupported openssl version in supported Yocto releases). There are several recipes that are not API compatible with 1.1; some of them will eventually be fixed, but others will never be (such as Qt4). To avoid breaking such recipes when openssl 1.1 is added to oe-core, let's provide "openssl10" already now and change the recipes to depend on that where necessary; Qt4 is a particularly pressing issue as it is causing failures on the autobuilder with my work in progress openssl 1.1 branch, and so I'm not able to see what else would fail later in the build process. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31perl-native: Bring build dependencies inline with target perl packageSerhii Popovych1
Make sure we have all build time dependencies of perl-native satisfied before we start building it. Behaviour was observed with RHEL6 build hosts where perl-native build fails at linging stage when attempting to link to the build hosts old Berkley DB because virtual/db-native is missing in native sysroot. Add dependencies to the native packages taken from perl recipe. Cc: XE-Linux <xe-linux-external@cisco.com> Signed-off-by: Serhii Popovych <spopovyc@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31distutils3.bbclass: Fix path to python for scriptsSerhii Popovych1
This change is similar to the recently introduced change to the distutils.bbclass fixing shebang line in python scripts for nativesdk class builds. v2: Rebased on top of new head. Cc: XE-Linux <xe-linux-external@cisco.com> Signed-off-by: Serhii Popovych <spopovyc@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31distutils.bbclass: Fix path to python for scriptsSerhii Popovych1
Commit 11229de (distutils: Replacing path to native python by path to python in the image to support python packages with console-script setup) replaces path to python-native with path to the python interpreter in the target image. However on nativesdk builds ${bindir} expanded to the ${SDKPATHNATIVE}${prefix_nativesdk} making shebang line pointing to the absolute path to env(1) in SDKPATHNATIVE which may not be present if coreutils isn't part of nativesdk. On the other hand commit cf63d90 (bitbake.conf: Define USRBINPATH globally instead of individually) introduces USRBINPATH variable which has correct value regarding build class and intended for this use case. v2: Rebased on top of new head. Cc: XE-Linux <xe-linux-external@cisco.com> Signed-off-by: Serhii Popovych <spopovyc@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31openssl: Fix regression when building for thumb2Max Krummenacher1
Commit 'c8da8ce openssl: Fix build with clang' introduced a regression. do_compile fails when building with gcc/thumb2. Note that I did not test if it still builds with clang. Prevents the following when building with thumb2: | ghash-armv4.S: Assembler messages: | ghash-armv4.S:88: Error: thumb conditional instruction should be in IT block -- `ldrplb r12,[r2,r3]' | ghash-armv4.S:98: conditional infixes are deprecated in unified syntax | ghash-armv4.S:98: Error: thumb conditional instruction should be in IT block -- `ldrplb r8,[r0,r3]' | ghash-armv4.S:105: Error: thumb conditional instruction should be in IT block -- `eorpl r12,r12,r8' | ghash-armv4.S:107: Error: thumb conditional instruction should be in IT block -- `andpl r14,r12,#0xf0' | ghash-armv4.S:108: Error: thumb conditional instruction should be in IT block -- `andpl r12,r12,#0x0f' | ghash-armv4.S:144: conditional infixes are deprecated in unified syntax | ghash-armv4.S:144: Error: thumb conditional instruction should be in IT block -- `ldrneb r12,[r2,#15]' | ghash-armv4.S:231: conditional infixes are deprecated in unified syntax | ghash-armv4.S:231: Error: thumb conditional instruction should be in IT block -- `ldrplb r12,[r0,r3]' | ghash-armv4.S:248: Error: thumb conditional instruction should be in IT block -- `andpl r14,r12,#0xf0' | ghash-armv4.S:249: Error: thumb conditional instruction should be in IT block -- `andpl r12,r12,#0x0f' Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30nasm: remove COMPATIBLE_HOSTRoss Burton1
nasm can build on every architecture, it just can't generate anything but X86 code. As we can't know what the user intends to do with nasm, remove the COMPATIBLE_HOST line. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30net-tools: enable native and nativesdk variantPatrick Ohly1
net-tools-native is needed by swtpm-wrappers (in meta-security) because swtpm_setup.sh calls netstat, which cannot be assumed to be present in all Linux installations (for example, it is not in OpenSUSE minimal base). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30base.bbclass: ensure HOSTTOOLS links point to executablesRoss Burton1
Use the new executable argument to bb.utils.which() to ensure that the symlinks point to executable files and not for example directories with the right name which happened to be on $PATH. [ YOCTO #11256 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30sanity.conf: Increase minimum version requirement to 1.33.3Richard Purdie1
This pulls in changes to bb.utils.which() for HOSTTOOLS. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30linux-libc-headers: Remove reference to cross-linkageRichard Purdie1
This is long dead (thankfully), remove stale reference/comment. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30linux-libc-headers: Drop 4.4Richard Purdie1
We've been using 4.10 for a while now, I think 4.4 was accidentally left behind so clean it up. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30glibc-package: Allow 32 and 64 bit headers to exist on armRichard Purdie1
With this change (combined with the previous linux-libc-header fix), a combined sysroot for 32 and 64 bit arm works meaning our SDK works correctly for that multilib setup. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30linux-libc-headers: Allow arm kernel headers to coexist on 32/64 bitRichard Purdie1
Its rather sad we need to do this but in order to make combined 32 and 64 bit SDKs work, we need a common set of headers and this is the delta that allows things to work. It only applies on arm. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30multilib_header: Update wrapper to handle arm 32/64 bitRichard Purdie1
Having arm 32/64 bit headers coexisting turns out to be tricky. Unfortunately our wrapper works using wordsize.h and this differs on arm so we can't use it. Therefore replicate the logic here for arm. I did look into writing our own wordsize.h but we also need to remap kernel headers on arm and since wordsize.h comes from libc, that doesn't work for kernel headers. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30bitbake.conf: Drop MULTIMACH_HOST_SYSRichard Purdie1
There are no users of this left after recipe specfic sysroots was implemented, drop the variable as it no longer makes sense or is useful. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-30ccache: Use MULTIMACH_TARGET_SYS not HOST_SYSRichard Purdie1
I suspect this was a typo and that TARGET_SYS makes more sense here. Its also the only remaining user of MULTIMACH_HOST_SYS in OE-Core. Change it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 21:24:07 +0000