| Age | Commit message (Collapse) | Author | Files |
|---|
|
When getting the failures/errors/skipped lists, include the
unit test without the full path.
This issue was found on this scenario
| test_1_logrotate_setup (oeqa.runtime.logrotate.LogrotateTest) ... FAIL
| test_2_logrotate (oeqa.runtime.logrotate.LogrotateTest) ... ok
Where test_1_logrotate failed and test_2_logrotate should not have
run because
@skipUnlessPassed("test_1_logrotate_setup")
def test_2_logrotate(self):
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the kern-tools SRCREV to import the following fix:
kgit-meta: resume after last applied patch
When the auto-resume (resume point detection) was removed from the
processing of a meta-series, it ignored the fact that a single patch
series may in fact be processed a number of times.
Two layers patching a kernel will generate two different runs on the
same branch, which always start at patch one. This will obviously
break with duplicate patches.
To avoid this, we simply track the last patch applied, and
explicitly
tell the patch scripts where to start. This gets us resume
functionality, without the overhead of resume point detection.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the 4.1 SRCREVs to integrate the following DRM backports:
a8abc111a96d drm/i915: Only wait for required lanes in vlv_wait_port_ready()
81354180432b Revert "drm/i915: Hack to tie both common lanes together on chv"
d660fc117731 drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
0e797e9cb717 drm/i915: Implement chv display PHY lane stagger setup
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some important fixes and CVEs in 4.1.8, so we update the
SRCREVs to integrate the -stable changes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the axxia preempt-rt integration, the preempt-rt
branch now becomes standard/preempt-rt/base, to allow proper
branch inheritance as: standard/preempt-rt/axxia/base.
No functional changes happen to the base -rt, just the default
KBRANCH changes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gettext 0.16.1 doesn't install any m4 files to sysroot, please see
the following commit:
commit 9e10db5bdfe77c0ef2aff2f1cf89958b62c294a1
Author: Christopher Larson <kergoth@gmail.com>
Date: Mon Mar 17 18:10:54 2014 +0000
gettext-0.16.1: kill target m4 macros from sysroot
This is aim for using gettext-native's macros(gettext-native-0.19.4),
but when we set:
PREFERRED_VERSION_gettext = "0.16.1"
And build the recipes like pcmanfm, we would get errors when
do_configure:
configure:5164: error: possibly undefined macro: AM_NLS
This is because autotools_copy_aclocals doesn't copy the native macros
for target unless they're direct dependencies.
Add gettext-native to DEPENDS will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code is creating more abstract types which is nice however it should
be using standard defines from stdint.h and not random defines to base
its own type system
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the logic to check if a test failed was
to check for an exception in the thread, but some
decorators used in the syslog runtime test would
generate and handle exceptions; this will mess
with the current check logic and will dump the
host and the target as if the test failed.
This patch changes the check logic to verify if
the test that just happend is in the failure test
list and dump the host and target accordingly.
[YOCTO #8406]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CWAUTOMACROSPREFIX is ${D}${prefix} which is used as the prefix
of install dir and used to replace the path placeholder in script
autogen.sh, the former is correct but not for the later, we can
fix the Makefile to use two variables for this, but I think a sed
replacement would be fine since the package has not been in
development for a long time.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When copying the exported tests to a remote machine ssh_target_log can
be transformed from softlink to file which will throw an error when
trying to run again.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the output from qemu could contain control
or Unicode characters; having such characters in the
log will cause an internal server error when sending
the report to error reporting web. Control characters
can be found in the command line used to run quemu too.
This change sanitize the output from qemu and the
command line used to run qemu, this way the logs doesn't
contain control or Unicode characters and this will solve
the issue of error reporting web and generate better
logs.
The only Unicode character found in the qemu output
is the copyright symbol, it really doesn't interfer
removing Unicode characters with debugging.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just like we have in oe-selftest, you can add
<filename>.<Class>.<testname> in TEST_SUITES in order to
run just that test
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed wic-image-minimal.bb and wic-image-minimal.wks as they're
also present in meta-selftest/recipes-test/images/
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If building for a BE8 ARM target, arch is "armeb" rather than
"arm", but ABI should still be "gnueabi". Otherwise gcc won't
build.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove dependencies for test targets. Otherwise, during ptest
execution, "make" tries to rebuild those executables and fails
there.
[YOCTO #8059]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when bitbake nativesdk-python-async:
DEBUG: Executing shell function do_compile
Traceback (most recent call last):
File "setup.py", line 2, in <module>
from setuptools import setup
ImportError: No module named setuptools
Replace distutils with setuptools will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The runuser command fails with below error message, add proper PAM
config files to fix the problem. The config files are borrowed from
CentOS 7.0 release.
runuser: Failure setting user credentials
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When not doing actual tests with testimage, like for example
exporting tests, the link to the log file was still created
although the actual log file was not existent. Fixed it by
moving the link creation part into the run() method.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
typos.
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently a lib32-core-image-* SDK prints an incorrect environment-setup-*
file name when installing the SDK. Instead of printing the wrong thing, list
the environment setup files present in the SDK.
As it happens this fixes the message printed with buildtools-tarball too
which someone reported to me about the same time as I finished this patch!
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building a base image such as core-image-minimal with lsb and then
attempting to source /lib/lsb/init-functions, then using the start
_daemon function (to start a daemon, such as syslogd) fails, since
/lib/lsb/init-functions use functions (incl. "daemon()") from file
/etc/init.d/functions.lsbinitscripts, which is provided by package
lsbinitscripts.
Running daemon() then calls /usr/bin/mountpoint, which is provided
by util-linux.
So, lsbinitscripts has been added as an RDEPENDency in lsb, and in
turn util-linux has been added to lsbinitscripts.
[YOCTO #7732]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids a "Could not unlink" warning when extracting a /var/run
symbolic link pointing to /run from the base-files package as it is
unable to unlink the /var/run directory when it contains opkg.lock.
This also fixes an issue where /var/run is created as a directory
instead of a symbolic link to /run.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Acked-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the extrating faster by:
* Merge the two heavy "for .. find" loops into one
* Move the commands out of for loop rather than inside, this can reduce the
forking amount.
As a result, when install:
* buildtools-nativesdk-standalone: 14s -> 7s (50% saved)
* core-image-minimal-core2-64-toolchain: 56s -> 47s (17% saved)
[YOCTO #8404]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When looking at and trying to build a slightly customised SDK, I
realised the code could be simplified and written in a way which was
more customisable.
This patch moves various function calls into the SDK_POSTPROCESS_COMMAND
which was intended for this kind of use.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you
see failures due to dependency problems. The work in resolving this was
partially completed a while back. This adds in the markup mainly for
gtk/gtk3+ recipes and means "bitbake world" will work successfully.
Rather than code the gtk/gtk+ specific distro features into each recipe,
a shared variable is used.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
New method for checking the status of the working tree of a repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Removes some code duplication.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
In order to remove some code duplication. The method currently only
does checking of workspace dir.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Makes it possible to define which paths are included in the patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The makefile test was hardcoding a test for gcc. In the SDK context, we
need to use $(CC) to use the cross compiler.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous fix works well for normal tasks since the ordering is always
correct and gdk-pixbuf-native comes first. Setscene ordering is reversed
so we can't rely on this there. Remove the fix in that case since
it breaks more than it solves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the json file the whole datastore is serialized which contains
absolute path to the oeqa folder. This breaks the functionality
when trying to run the tests from other machines.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, the iproute2's configure script is actually run in the
do_compile stage. There's a Makefile rule 'all: Config' which makes
the configure process run to generate the Config file.
However, this makes it hard to fix the dependency problems. We need
to generate the Config file in the do_configure stage.
Add do_configure_append to separate the configure process from the
compile process.
Besides, explicitly disable ATM support for iproute2, otherwise we'll
sometimes meet errors like below when building.
ld: cannot find -latm
collect2: error: ld returned 1 exit status
Makefile:154: recipe for target 'q_atm.so' failed
make[1]: *** [q_atm.so] Error 1
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The ccargs obtained from get_tune_parameters may not be fully expanded,
so that the gcc_multilib_setup function can be confused, and generates
invalid MULTILIB_OPTIONS in GCC Makefile fragment, which will break the
multilib feature of target gcc.
To address problems above, this patch modifies gcc_multilib_setup
function to expand ccargs before use.
Upstream-Status: Inappropriate [configuration]
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
rootfs.py: added a test in DpkgOpkgRootfs which skips the
get package post installs step (get_pkgs_postinsts), when
PACKAGE_INSTALL is empty.
[YOCTO #7664]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #7787]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The -rt build suffered the same breakage in master as the standard
kernel builds: due to a bad git history merge, existing patches were
dropped from branches.
This meant that we were missing the -rt changes, which re-introduced
some failures with linux-yocto-rt.
With these SRCREV updates, we have the latest 4.1.x-rt and all
architectures build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Updating the meta SRCREVs to integrate the following config change:
Author: Saul Wold <sgw@linux.intel.com>
Date: Tue Sep 22 07:23:06 2015 -0700
common-pc-drivers: add CONFIG_PATA_SCH
The NUC uses this hardware and should still operate correctly with a
genericx86
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gcc 5.x defaults to -std=gnu11 instead of -std=gnu89 which causes
semantics for inline functions changes.
The standalone 'inline' causes error with gcc 5 such as:
git/testcases/kernel/syscalls/kill/kill10.c:355: undefined reference to
`k_sigaction'
Replace inline with static inline to be compatible with both gcc 4 and 5.
Found and test with configure:
SELECTED_OPTIMIZATION="-O0 -fno-omit-frame-pointer -g -pipe"
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backport needed patches for compilation fixes on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The files under /etc/pam.d should be 0644. The /etc/pam.d/cups file has
0444 after 'make install'. This patch fixes this problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch was on mailing list, another patch to make sure -r is not
passed directly but via -Wl switch is added.
This was exposed when using clang and gold linker, clang does not have
-r switch to do relocatable objects and problem happens specific to OE
becuase we use LD = CC
now what happens is that busybox assumes that linker will be called
directly, and hence sprinkles linkers options in its kbuild system which
aggregate into LDFLAGS, some of these options are happily ignored by gcc
as well but it passes -r options rightly to linker so it all works,
however when using clang, this falls apart since -r is not known option
for clang so it drops this option and all obects which should be
partially linked becomes ET_EXEC and when they are added to final link
then gold starts to get confused
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/x86_64-linux/usr/bin/arm-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ld:
error: applets/built-in.o: unsupported ELF file type 2
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes busybox honor UTMPX feature if available in a libc
[YOCTO #8243]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
empty or absent
Instead, simply return the version of the recipe, so that the upstream
version checker will declare that they match.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added some fixes for meta-intel boards and moved some
errors from specific images to common.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
