Age | Commit message (Collapse) | Author | Files |
|
Addresses a stall (by prompt) condition of the run.do_configure at when
executed directly from the workdir, like when using the devshell.
[YOCTO 7369]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This seems to have been disabled since the dawn of time for no good reason.
Enable the .debug stripping and packaging allowing for a smaller SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The list of directories for ltp-dbg is incomplete, so
we generalize it.
We also eliminate a non-fatal qa error that the file
test_arch_stripped is stripped.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The init-functions had been installed to /lib/lsb/init-functions
according to lsb spec, then there is an installed-vs-shipped issue when
build with multilib:
ERROR: QA Issue: lsb: Files/directories were installed but not shipped
/lib
/lib/lsb
/lib/lsb/init-functions [installed-vs-shipped]
Fix the issue and indent.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make the v4l PACKAGECONFIG option control building of the video4linux2
plug-in (not use of libv4l, as it did before) and enable by default.
Add a separate libv4l PACKAGECONFIG to control use of libv4l (disabled
by default since libv4l is not part of oe-core).
The default config for gst-plugins-good and gstreamer1.0-plugins-good
is now aligned with regards to v4l, ie:
v4l support: enabled by default
v4l use of libgudev: enabled by default
v4l use of libv4l2: disabled by default
This commit fixes the following build-deps QA Warnings:
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libudev, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libgudev, but it isn't a build dependency? [build-deps]
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This sed script hasn't worked since PulseAudio 0.9.8 (released in
2007), because the match condition refers to "sinc-fastest", while the
default resampler is nowadays speex-float-1.
The idea behind the sed script might be good, but it seems obvious
that nobody is actually depending on the script, so let's just delete
it.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add patch for make castings to time_t values that are long long int
in x32 ABI.
[YOCTO #7447]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Add a patch for fix printing of time_t value that is long long int
in x32 ABI instead of long int.
[YOCTO #7423]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Add a patch for fix build in x32 ABI, the fail is cause by time_t
printf because time_t is long int in x64 and long long int in x32.
[YOCTO #7422]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Otherwise systemd uses AC_PROG_PATH and finds it in the sysroot or host
system, which won't work on the target.
[YOCTO #7408]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since udev version 176 (udev commit 06316d9) udev switched modprobe
explicit rules by the builtin kmod support.
The rule using the builtin kmod support is in
'/lib/udev/rules.d/80-drivers.rules':
DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
perf has a dependency on bash in its utilities, which generate the
following warning:
WARNING: QA Issue: perf requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
Since perf is not installed on extremely small systems, we just add
bash to the RDEPENDS, rather than modifying scripts or removing content.
[YOCTO: #7445]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Updating to the latest and greatest -stable release for the 3.19 series.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
The linux-yocto kernel has a meta-data component which accompanies the
actual tree. That meta-data is processed to generate a series file that
controls the patching and configuration of the kernel.
patching and configuration are two distinct phases, so when working on
kernel configuration, it doesn't make sense to always have to re-run
the patching step just to update configuration data in the meta-series.
To allow a more granular set of tasks, we break the meta-data generation
into a separate task, which runs before do_patch. This allows the task
to be explicitly called when working on configuration, but otherwise
has no impact on the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
When fixing a kernel configuration warning, it is often necessary to
modify the kernel's meta-data and re-run the tools to update and
re-audit the config. This implies that the patch, config and audit
steps are run multiple times.
The tools had a bug that would incorrectly restore old meta-data
versus using updated configuration. Updating the kern-tools SRCREV
to fix the issue.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
On WIN32 the file argument to gst_debug_log_valist is shortened to just
the filename. This is useful not only for MSVC, but also with gcc/Linux
when doing cross-compilation builds and out-of-tree builds.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For now, we would meet the following QA error if we build dbus-test in
the same build directory with multilib enabled/disabled.
The steps are as follows:
1. Enable multilib and `bitbake dbus-ptest'
2. Disable multilib and `bitbake dbus-ptest'
The error message is as follows:
ERROR: QA Issue: dbus-test: Files/directories were installed but not shipped
/usr/lib64
/usr/lib64/dbus-test
/usr/lib64/dbus-test/ptest
/usr/lib64/dbus-test/ptest/run-ptest
...
The problem is that the ${D} is not cleaned up at the second build while it
should be.
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sometimes we need to override the gdb from third party
tool SDKs, this helps out, moreover it also makes it consistent
with in OE-Core too to have multiple versions of gdb if we ever
needed to
Change-Id: Ibe1ae59175984bbc661c243764c81cd99fef54d1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes a scenario where the system has libpulse installed but not
pulseaudio-server. The "breakage" didn't have any big practical
effects, though, because the default client.conf contains only
comments anyway.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch creates a variable for the install_dir name so it can be
something other than /install, also by doing this we can correctly
clean up the empty directories (/install/tmp) during the clean-up
phase. The new default is /oe_install so as to not conflict with other
possible packages that might use /install to place files.
[YOCTO #7353]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test_nonmatching_checksum doesn't need the default dependencies,
and they would just take extra time to generate.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
test_foo is renamed to test_nonmatching_checksum. It was a mistake to
submit it with the old name.
There was also some extra whitespace removed.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
libmatchbox links to libjpeg if it is present so just explicitly build
it and then check it appears in DEPENDS.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the change to externalsrc we can now handle these, so add a test
to ensure they can be built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Whilst this test would seemingly be better placed as a runtime test,
unfortunately the runtime tests run under bitbake and you can't run
devtool within bitbake (since devtool needs to run bitbake itself).
Additionally we are testing build-time functionality as well, so
really this has to be done as an oe-selftest test.
This test does have a few perhaps unusual requirements in order to run:
* pexpect is installed
* MACHINE is set to one of the qemu machines
* runqemu tap devices have been set up
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Allow get_bb_var() to work with unexported variable values such as
MACHINE - the workaround is a little crude but should suffice for now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If SRC_URI contains local files (file:// references) these will almost
certainly be required at some point during the build process, so we need
to actually fetch these to ${WORKDIR} as we would normally.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Consolidate code for checking compatible recipes and consider meta and
packagegroup recipes as well as package-index and gcc-source to be
incompatible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a -a/--all option to allow you to quickly reset all recipes in your
workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backport a bug fix from upstream gst-player to make
Pause and Play buttons work properly in gtk-play.
[ YOCTO #7429 ]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch was part of the 1.8.1 release.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This patch was part of the 0.2.4 release.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
glibc provides NSS, other libc do not, so only add libnss-mdns to the
zeroconf package group for glibc.
This fixes the build of core-image-sato for e.g. uClibc
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
manifest creation
Add licenses point to COMMON_LICENSE_DIR because glibc-collateral.inc is
a recipe that don't provide tarball/repo with LICENSE files.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Since busybox also provides the unzip command use the update-alternatives
mechanism to address this.
[YOCTO #7446]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fix solves the problem with the ownership of files in packages.
The do_install task was producing correct and expected output but when
the files were being put in, e.g. a rpm package, the ownership could
be different than that in the do_install task.
[YOCTO #7428]
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Fabrice Coulon <fabrice.coulon@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
common errors.
And some minor tweaks like moving some errors from qemu to common.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without this patch the source archiver class is not allowed to
archive the same source archive for different builds.
Signed-off-by: Adrian <adrian.freihofer@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* rpcbind.service requires rpcbind.socket and systemctl tries to add it twice
* see log.do_rootfs:
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs enable rpcbind.service rpcbind.socket
Try to find location of rpcbind.service...
Found rpcbind.service in /lib/systemd/system/rpcbind.service
Also=rpcbind.socket found in rpcbind.service
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs enable rpcbind.socket
Try to find location of rpcbind.socket...
Found rpcbind.socket in /lib/systemd/system/rpcbind.socket
WantedBy=sockets.target found in rpcbind.socket
Enabled rpcbind.socket for sockets.target.
Try to find location of rpcbind.socket...
Found rpcbind.socket in /lib/systemd/system/rpcbind.socket
WantedBy=sockets.target found in rpcbind.socket
ln: failed to create symbolic link '/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs/etc/systemd/system/sockets.target.wants/rpcbind.socket': File exists
Enabled rpcbind.socket for sockets.target.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Noticed in this log.do_rootfs error:
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs disable bluetooth.service
Try to find location of bluetooth.service...
Found bluetooth.service in /lib/systemd/system/bluetooth.service
WantedBy=bluetooth.target found in bluetooth.service
rmdir: failed to remove '/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs/etc/systemd/system/bluetooth.target.wants': No such file or directory
Disabled bluetooth.service for bluetooth.target.
Disabled bluetooth.service for dbus-org.bluez.service.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gstreamer1.0-libav makes AAC playback possible but is protected by
the "commercial" LICENSE_FLAGS: recommend -libav if those licenses
are enabled.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
base.bbclass already sets EXTRA_OECMAKE when cmake.bbclass is inherited.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|