Age | Commit message (Collapse) | Author | Files |
|
Allow UTF-8 characters on control files. Also handle an expection
in case of invalid characters (non UTF-8).
[YOCTO #6693]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This commit changes the both CFLAGS and CXXFLAGS when building the
valgrind ptest binaries by appending -O0, forcing no optimizations
instead of the default -O2. For qemux86-64, this change results in
FAIL/PASS ratio improvements from 149/394 to 58/485.
It is evident that the expected result files were generated from
regression tests binaries built without optimizations.
[ YOCTO #8063 ]
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
7.0p1 includes the fix for CVE-2015-5600, and release note is in:
http://www.openssh.com/txt/release-7.0
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pixops: Be more careful about integer overflow
Integer overflow in the make_filter_table function in pixops/pixops.c
in gdk-pixbuf before 2.31.5, as used in Mozilla Firefox before 40.0 and
Firefox ESR 38.x before 38.2 on Linux, Google Chrome on Linux, and other
products, allows remote attackers to execute arbitrary code or cause a
denial of service (heap-based buffer overflow and application crash) via
crafted bitmap dimensions that are mishandled during scaling.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Clean up SRC_URI.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In recipes that are exempt from source code archiving due to
COPYLEFT_LICENSE_EXCLUDE, do_deploy_archives does not have a transitive
dependency on do_unpack. Given enough parallelism, this means
do_deploy_archives can run at the same time or before do_unpack.
Because do_deploy_archives did not specify a working directory, its
working directory was ${B}, which defaults to ${S}, which may be set by
a recipe to a directory that is created by do_unpack.
In this case, do_deploy_archives can fail because do_unpack deletes and
re-creates the directory and do_deploy_archives cannot change into the
non-existent directory. Avoid this problem by explicitly specifying
a working directory for do_deploy_archives (and for
do_deploy_all_archives as well for good measure).
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Drop upstreamed patches convert the rest to git am'able patches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It seems all other architectures provide their own definitions for these
functions like __ACC_UA_GET_LE16 and this code is exposed only on ppc
this is the typical extern inline ( gnu definition ) version c99
semantics, lets use static inline which works both ways
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Just when building on host which doesnt have libunistring on host guile
fails the following configure test
| configure: error: GNU libunistring is required, please install it.
| Configure failed. The contents of all config.log files follows to aid
debugging
The reason is that its looking for libunistring dev files on build
system, so lets point the configure into target sysroot, similar issue
exist for libgmp, libltdl detection as well, fixed thusly
Get rid of trailing whitespaces while here
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
glibc has recently turned on Werror globally which is good but then not
all option combos are well tested so there still remains cleanup needed
when not using -O2, so lets just disable Werror in such cases, until
fixed upstream
Change-Id: I2d491c360a15b0752c97ff77ee0faaeede6e8d2a
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Usually, the host's tar command is sufficient. However, special cases
like archiving xattrs depend on a modern GNU tar version. The new
IMAGE_CMD_TAR makes that possible, with xattrs given as example.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Building tar-replacement-native as replacement of the host's tar in
the standard path was meant to be done manually by a user in
preparation for the regular bitbake run. Such a usage has been
superseeded by installing the pre-compiled buildutils and might have
been broken on hosts which need it by the sanity check for tar >=
1.26.
Therefore tar-replacement-native_1.28.bb can be removed in favor of
adapting the normal tar recipe such that it installs an opt-in binary
under a different path.
The special do_install logic is explicitly limited to class-target,
instead of making it the default and disabling it (which would be the
case for class-native and class-nativesdk).
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All CVE patches removed, included in release.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently adt-installer uses "${TMPDIR}/deploy/sdk/" as a deployment dir.
This doesn't interact well with DEPLOY_DIR reassignment. So let's use
"${DEPLOY_DIR}/sdk/" instead.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xattrs may be needed by some distros. Support that by compiling in the
necessary code, even if it is not used by default. Then .jffs2 images
including xattrs can be created with:
EXTRA_IMAGECMD_jffs2_append = " --with-xattr"
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Also, drop puzzles_x32_abi_time.patch as it has been merged upstream
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
quilt ptest requires getopt and perl-module-overloading.
[YOCTO #8062]
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bump to version 7.44
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Add a patch which updated add LDFLAGS variable to SLDFLAGS
in Makefile.
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* License is now GPLv3+
* Remove patches that are already in upstream or not applicable
anymore
* Add a patchset to enable cross-compiling 4.3.1 (modified from
http://savannah.gnu.org/bugs/?43223)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
libmvec is new library in glibc 2.22 and currently turned on by default
on x86_64. this helps in packaging it properly when its generated
Fixes warning like
WARNING: QA Issue: nativesdk-glibc: Files/directories were installed but
not shipped in any package:
/usr/local/oecore-x86_64/sysroots/x86_64-angstromsdk-linux/lib/libmvec-2.21.90.so
Please set FILES such that these items are packaged. Alternatively if
they are unneeded, avoid installing them or delete them within
do_install. [installed-vs-shipped]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- git'ify the OE patches
- add_resource_h_to_wait_h.patch - dropped, we do not support that old
perf anymore
- mips-rld-map-check.patch - Dropped because binutils is fixed for it
see https://sourceware.org/ml/binutils/2011-12/msg00112.html
- initgroups_keys.patch - Folded into
0026-eglibc-Forward-port-eglibc-options-groups-support.patch
Change-Id: Ib8e731b212f52b8ff12e2180babbc19970fb1ef1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
6.9p1 is primarily a bugfix release.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This basically means replacing a "-14" Debian patch with "-15" patch.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This means replacing a "-6.1" Debian patch with "-7" patch.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes due to IMAGES_FSTYPES "vmdk" and "vdi" now defaulting to ext4.
Switching Build Appliance to Ext4 will bring it more in-line with other BSPs.
[YOCTO #8096]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following IMAGES_FSTYPES defaulted to ext3:
"vmdk", "vdi", "qcow2", "live", "iso", "hddimg"
This patch changes the default for those IMAGES_FSTYPES to
ext4 in order to bring the images more in line with other BSPs.
Besides improvements in performance and reliability ext4 provides
additional functionality as well (option to turn off the journaling,
dynamic resizing of VDI volumes etc.).
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows to write the dump files immediately
after get the data from the target. Before this,
it would run all the commands and write the files.
The old behavior could cause no log written at all
if the serial console gets stuck.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The tearDown method is triggered when a tests ends
it doesn't matter if fails or succeeds. Inside this
method added an evalution to check if fails and then
run some commands in the target to get the data for
later debugging.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allow to search for the prompt after a command is
run so it can avoid waiting for the timeout.
Also corrected identation issues
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Raw mode allows to send the command without sending
'echo $?' for validation; Also this doesn't remove the
command or the prompt from the output returned. In raw
mode validation is done if there is output.
This raw mode would be useful for validate the prompt
when a user logs in.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds the automatic login after the target
finished booting. If the automatic login fails
it won't stop the target or any test, it would
only send a log to the file.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The only need for the console before this patch was
to check if the target has booted. This allows to send
commands to the terminal.
This new method is based on the method with the same name
of the QemuTinyRunner class. The difference here is it will
remove the command and the prompt. The other diference is
it will send an echo $? to check if the last command was
successful.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sbsigntool depends on gnu-efi and we need sbsigntool-native to do some signing, so extend gnu-efi to support that.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We are expecting some random failures in QEMU runs one of this is
related to qemu_cpu_kick_thread that ends on exit(1) on qemu.
To improve debug information add patch that prints the backtrace and
the status of qemu cpu.
[YOCTO #8143]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If srcdir is not set, we get below error while running ptest for bash
on qemu target,
-- snip --
root@qemux86:/usr/lib/bash/ptest# ./run-ptest
/bin/sh: line 0: cd: /home/ajay/Downloads/poky-fido-13.0.0/build/tmp/work/i586-poky-linux/bash/4.3-r1/bash-4.3/tests: No such file or directory
Makefile:879: recipe for target 'runtest' failed
make: *** [runtest] Error 1
root@qemux86:/usr/lib/bash/ptest# vi run-ptest
root@qemux86:/usr/lib/bash/ptest#
-- CUT --
So, set srcdir to current directory, where tests binaries exist.
[YOCTO #8145]
Signed-off-by: Ajay M <ajay.gju@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upstream has moved git hosts, so update the SRC_URI appropriately.
[ YOCTO #8181 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rebase gtk-option.patch
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is a bug fix release.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
mc depends on util-linux that uses libmount for mount filesystems.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
fix_symlink will be called many times, like populate_sysroot and populate_lic;
which maybe lead to rpm-native building failure, due to the below error:
".../usr/lib/libacl.so: No such file or directory"
since after acl/attr finished populate_sysroot task, rpm start to be compiled
but acl/attr populate_lic, which run fix_symlink, maybe remove the
.../usr/lib/libacl.so
In fact, fix_symlink only needs to be called after populate_sysroot
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes affecting future time stamps
North Korea switches to +0830 on 2015-08-15. (Thanks to Steffen Thorsen.)
The abbreviation remains "KST". (Thanks to Robert Elz.)
Uruguay no longer observes DST. (Thanks to Steffen Thorsen
and Pablo Camargo.)
Changes affecting past and future time stamps
Moldova starts and ends DST at 00:00 UTC, not at 01:00 UTC.
(Thanks to Roman Tudos.)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes affecting code
zdump and zic no longer warn about valid time zone abbreviations
like '-05'.
Some Visual Studio 2013 warnings have been suppressed.
(Thanks to Kees Dekker.)
'date' no longer sets the time of day and its -a, -d, -n and -t
options have been removed. Long obsolescent, the implementation
of these features had porting problems. Builders no longer need
to configure HAVE_ADJTIME, HAVE_SETTIMEOFDAY, or HAVE_UTMPX_H.
(Thanks to Kees Dekker for pointing out the problem.)
Changes affecting documentation
The Theory file mentions naming issues earlier, as these seem to be
poorly publicized (thanks to Gilmore Davidson for reporting the problem).
tz-link.htm mentions Time Zone Database Parser (thanks to Howard Hinnant).
Mention that Herbert Samuel introduced the term "Summer Time".
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building uImage fails when KEEPUIMAGE is not "yes".
Remove wrong removal of linux.bin before compressing it.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The insert_feed_uris() method of OpkgPM was creating an initial
entry in the feeds list which pointed to the root of the ipk
directory, however the on-device package manager can't consume
this feed resulting in runtime errors - therefore we remove the
code to generate that initial feed uri.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|