summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2017-01-23kernel-yocto: firewire and audio configuration updatesBruce Ashfield3
Integrating firewire and audio configuration updates from Jussi: Add support for IEEE-1394 (Firewire) Adds support for IEEE-1394 aka Firewire bus and some commonly used devices. Signed-off-by: Jussi Laako <jussi.laako@linux.intel.com> Update audio support Updates audio support to work with modern audio hardware while dropping some legacy parts. Signed-off-by: Jussi Laako <jussi.laako@linux.intel.com> Signed-off-by: Jussi Laako <jussi.laako@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23linux-yocto/4.4/4.8/4.9: netfilter: iptables: enable NAT tablesBruce Ashfield9
This changes adds 'nat' table in iptables. The netfilter side is already configured for NAT but iptables config was missing. Further, CONFIG_IP_NF_TARGET* configured below depend on CONFIG_IP_NF_NAT but remain disabled unless CONFIG_IP_NF_NAT is explicitly enabled. CONFIG_IP_NF_TARGET_MASQUERADE is needed by Connman to support tethering. Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23kernel-yocto: tiny features aka Link Time OptimizationBruce Ashfield9
Integrating the following patches for the 4.4/4.8 and 4.9 kernel to enable LTO for linux-yocto-tiny configurations (i.e. poky-tiny). b9735c0b4235 intel-quark: Remove support for serial-all ce02da2e7833 features/usb/serial: Add new usb serial feature f5b00d3a7e68 soc/x1000: Remove 'default policy' features ca2dc186ff32 soc/x1000: Remove unnecessary features 90061752cbb5 soc/x1000: Remove bsp/common-pc/* 00b26ed213c4 meta/intel-common: Have intel-quark-tiny use common-drivers-32-essential 7ce24a2c497b meta/intel-common: Add intel-common-drivers-32-essential feature ef711e0ab70e meta: Add lto-debug feature 1ca570817bf3 meta: Add lto-disable feature 45e5c2e9118e meta: Add lto (Link-Time Optimization) enablement feature Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23linux-yocto-rt/4.9: add -rt specific patchesBruce Ashfield3
The 4.9-rt kernel has been released, and this commit integrates the 286 patches in that series. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23kernel: introduce linux-yocto v4.9 recipesBruce Ashfield3
Introducing the 4.9 kernel recipes. 4.9 will be a LTSI kernel, so we introduce these recipes with the intent that they'll replace 4.1 as the LTSI kernel, and other older kernels (i.e 4.4/4.8) once 4.9 shown to be stable. linux-yocto-tiny and linux-yocto-rt are also part of this commit, but are placeholders while we wait for their content to be available. They will build, but provide nothing above the standard kernel at the moment. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23qemu: Upgrade to 2.7.1Aníbal Limón5
Minor upgrade contains fixes from 2.7.0. Removed patches (already in upstream): - 0001-pci-assign-sync-MSI-MSI-X-cap-and-table-with-PCIDevi.patch - 0001-virtio-zero-vq-inuse-in-virtio_reset.patch - 0002-fix-CVE-2016-7423.patch Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa/selftest: Adds test case for sdk-update eSDKFrancisco Pedraza1
1. Test case adds perl recipe before build eSDK. 2. After this added recipe, the script verifies the update: ${SDK_DEPLOY}/${TOOLCHAINEXT_OUTPUTNAME}.sh oe-publish-sdk [esdk] [path-to-http] CORE_IMAGE_EXTRA_INSTALL = "perl" bitbake -c populate-sdk-ext [some-image] devtool sdk-update This should fix [YOCTO #9369] Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23linux-firmware: relocate ath9k_htc blobs to correct packageSaul Wold1
The newer firmware blobs were versioned and landing in the default package so move them to their appropriately named package. [YOCTO #10942] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23qemuboot.bbclass: add blank lines in commentsRobert Yang1
Add blank lines in comments to make it easy for readind and updating. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-23runqemu: fixes for slirp, network device and hostfwdRobert Yang4
Fixed: - Add QB_NETWORK_DEVICE to set network device, it will be used by both slirp and tap. - Set QB_NETWORK_DEVICE to "-device virtio-net-pci" in qemuboot.bbclass but runqemu will default to "-device e1000" when QB_NETWORK_DEVICE is not set, this is because oe-core's qemu targets support virtio-net-pci, but the one outside of oe-core may not, "-device e1000" is more common. - Set hostfwd by default: 2222 -> 22, 2323 -> 23, and it will choose a usable port when the one like 222 is being used. This can avoid conflicts when multilib slirp qemus are running. We can forward more ports by default if needed, and bsp.conf can custom it. - Use different mac sections for slirp and tap to fix conflicts when running both of them on the same host. [YOCTO #7887] CC: Nathan Rossi <nathan@nathanrossi.com> CC: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-23u-boot: Update to 2017.01 releaseMarek Vasut4
Upgrade U-Boot to the latest version. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23package_manager: default to have scriptlet output captured in logChen Qi1
We need to have scriptlet output captured in log. If we don't do so, some useful information from scriptlets (especially postinstall script) would be missing. In case a script has a warning message but it does not necessarily have to fail, the message should be captured. Opkg has already done that. Change for rpm and dpkg so that scriptlet output is captured and no warning message is missing. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23build-compare: derive PV from SRCPVJoe Slater1
Currently, PV is "git" and contains no version information. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23glibc: Upgrade to 2.25 snapshotKhem Raj36
glibc 2.25 release is in freeze stage now Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: store measurements as a dict (object) in the JSON reportMarkus Lehtonen1
Store measurements as a dict, instead of an array, in the JSON report. This change makes traversing of the report much easier. The change also disallows identically named measurements under one test, as a sanity check for the test cases. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: change sorting in json reportMarkus Lehtonen1
Use OrderedDict() instead of sort_keys=True (of json.dump()). Makes for more logical sorting of the values in the report. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oe-build-perf-test: remove unused imports and fix indentMarkus Lehtonen1
[YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oe-build-perf-test: save test metadata in a separate fileMarkus Lehtonen1
The patch introduces a new metadata (.json or .xml) file in the output directory. All test meta data, e.g. git revision information and tester host information is now stored there. The JSON report format is slightly changed as the metadata is not present in results.json anymore. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: report results in chronological orderMarkus Lehtonen1
Write results in the report file in chronological order, instead of random order dependent on test statuses. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: extend xml report format with test descriptionMarkus Lehtonen1
Add test description as an attribute to the <testcase> element. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: extend xml format to contain measurement dataMarkus Lehtonen1
Make the xml report format slightly non-standard by incorporating measurement data into it. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oe-build-perf-test: enable xml reportingMarkus Lehtonen1
Add --xml command line option to oe-build-perf-test script for producing a test report in JUnit XML format instead of JSON. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: include error details in json reportMarkus Lehtonen1
This will typically mean assert message and exception type plus a traceback. In case of skipped tests the reason (i.e. skip message) is included. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: sync test status names with JUnitMarkus Lehtonen1
Use 'failure' instead of 'fail'. Also, use 'expected' instead of 'exp'. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oeqa.buildperf: prevent a crash on unexpected successMarkus Lehtonen1
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23kern-tools: kconf_check: flag CONFIG options with invalid spacesBruce Ashfield1
Options with spacs around = signs will be droped/ignored by the kernel. The audit phase can detect this and warn the user: % kconf_check --report -o .kernel-meta/cfg/ \ linux-qemux86-standard-build/.config `pwd` $cfgs [errors (3): .kernel-meta/cfg/fragment_errors.txt There are errors withing the config fragments. % cat .kernel-meta/cfg/fragment_errors.txt Warning: Ignoring "CONFIG_PARAVIRTT_CLOCK =y" -- spaces around equals are invalid Warning: Ignoring "CONFIG_PARAVIRTTT_CLOCK = y" -- spaces around equals are invalid Warning: Ignoring "CONFIG_PARAVIRTTTT_CLOCK= y" -- spaces around equals are invalid Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23kern-tools: scc: Fix process_file error checkBruce Ashfield1
Commit 626ceac135fa66277c2fa53197be33cc9d4d7614 broke the error check in process_file by adding in three lines that stomp on $? which print the output file when verbose is set. Move output file on verbose print to an elif after the error check. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23busybox: refresh the flock patchMaxin B. John1
Upstream accepted the flock fix with some improvements. Backport those changes. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23alsa-tools: 1.1.0 -> 1.1.3Tanu Kaskinen2
Drop 0001-Cus428Midi-Explicitly-cast-constant-to-char-type.patch, because the new release has an equivalent fix (and that's actually the only change in the new release). Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23alsa-utils(-scripts): fix compile on build machines with python-docutils ↵Andreas Müller1
installed Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23alsa-utils-scripts: update 1.1.2 -> 1.1.3Andreas Müller1
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23alsa-utils: update 1.1.2 -> 1.1.3Andreas Müller1
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23flac: 1.3.1 -> 1.3.2Tanu Kaskinen1
Changelog: https://xiph.org/flac/changelog.html The license checksum changes are due to simple copyright year updates. Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23python3: Add upstream random.c fixes for recent glibcRichard Purdie2
python3 fails to work with recent glibc versions on older hosts, giving errors like: Fatal Python error: getentropy() failed Aborted This breaks buildtools-tarball and hence eSDK. This patch backports the changes to random.c from upstream that address the problem. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-23selftest/runtime-test.py: Adapt test to use new runtime frameworkMariano Lopez1
This adapt the current runtime selftest to use the new runtime framework. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23testexport.bbclass: Migrate testexport to use new frameworkMariano Lopez1
This migrates current testexport implmentation to use the new OEQA framework. [YOCTO #10686] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/runtime/context.py: Add defaults for runtime contextMariano Lopez1
This adds default values to OERuntimeTestContextExecutor class in order to make easier the execution of exported test that were generated with testexport class. [YOCTO #10686] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23testimage.bbclass: Add package install featureMariano Lopez5
This allows to use the package install feature with the new OEQA framework. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23testimage.bbclass: Add support for package extractionMariano Lopez2
testimage support the installation of packages without a package manager in the target. This adds support for package extraction required to support the installation feature. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/core/utils/test.py: Add functions to get module pathMariano Lopez1
This will add functions to get module file path from a test case or a complete suite. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23runtime/cases/smart.py: Migrate smart testsMariano Lopez2
This migrates the smart test from the old framework to the new one. This has its own commit because smart test was using bb and oe libraries that are available when exporting the test cases to run in a different host. Because of the removal of bb and oe libraries index and packages feeds creation will be managed in testimage bbclass. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/runtime/cases: Migrate runtime tests.Mariano Lopez51
This migrates current runtime test suite to be used with the new framework. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23testimage.bbclass: Migrate class to use new runtime frameworkMariano Lopez1
This migrates testimage class to use the new framework. Most of the code added here is to get rid off the data store dependency. [YOCTO #10234] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23core/target/qemu.py Adds qemu targetMariano Lopez1
This adds qemu target to be used in testimage. It uses the current QemuRunner class in order to boot and control qemu. [YOCTO #10231] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/runtime/context.py: Add logger to getTargetMariano Lopez1
Current targets (ssh and qemu) require a logger in their constructors, so in order to get a new target we need to provide the logger. [YOCTO #10686] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/runtime/context.py: Prepare for qemuAníbal Limón1
This commit will prepare context to use qemu and not just simpleremote. Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/utils/dump: Move get_host_dumper to OERuntimeTestContextExecutor classAníbal Limón4
To avoid getVar calls inside a utils module, also moves get_host_dumper import inside testexport isn't needed. [YOCTO #10231] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/runtime/context: Move helper functions for process args to executorAníbal Limón1
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/runtime/context: Add runtime option group and options for target type ↵Aníbal Limón1
and server ip. Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/core/context: Add option to select tests to runMariano Lopez1
This add the option to select what tests to run in the <module>[.<class>[.<test>]] format. Currently it just support modules Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-11 22:38:52 +0000