summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2016-07-25meta-extsdk-toolchain: add meta-recipe to install toolchain into eSDKPaul Eggleton2
Add a meta-recipe to bring the toolchain into the extensible SDK. This was modelled on meta-ide-support but some adjustments were needed to the dependency validation function in sstate.bbclass to ensure that all of the toolchain gets installed into the sysroot. With this, after installing a minimal eSDK you only need to run the following after sourcing the environment setup script to get the toolchain: devtool sdk-install meta-extsdk-toolchain Addresses [YOCTO #9257]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25classes/populate_sdk_ext: set default for SDK_INCLUDE_PKGDATAPaul Eggleton1
We don't absolutely need this - it doesn't change the default behaviour, but it seems to me we have a convention to set default values so we should add one here. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25oeqa/selftest/signing: check that we have GPG in setupRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25oeqa/selftest/signing: use a temporary directory for GPG homeRoss Burton1
Instead of using a directory in the layer as the GPG home and carefully deleting the right files from it, use tempfile to create a temporary directory which will be cleaned up for us. Also change the public/secret key variables to be absolute paths as they're always used as absolute paths. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25kdump: don't set default values for KDUMP_CMDLINE and KDUMP_KIMAGERoy Li2
Do not set default values of KDUMP_CMDLINE and KDUMP_KIMAGE, and leave them set by configure file since they are different for different architectures. Take KDUMP_KIMAGE kdump kernel image for example: x86 is bzImage mips64 is vmlinux ppc is uImage arm is zImage Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25harfbuzz: upgrade to 1.3.0Maxin B. John1
1.2.7 -> 1.3.0 Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25bluez5: upgrade to 5.41Maxin B. John1
5.40 -> 5.41 Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25dhcp: remove dhclient-script bash dependencyAndre McCurdy3
Take the dash compatible IPv6 link-local address test from the Debian version of dhclient-script. Note that although "echo -e" in the OE version of dhclient-script is technically bash specific too, it is supported by Busybox echo when Busybox is configured with CONFIG_FEATURE_FANCY_ECHO enabled (which is the default in the OE Busybox defconfig) therefore leave as-is. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25net-tools: lib/inet6.c:INET6_rresolve() - various fixesShan Hai2
Integrate the commit from https://github.com/ecki/net-tools/commit/a70c568b907d23ec2cf7defc81be50c351968f12 to fix a bug which causes the 'netstat -a' to print "[UNKNOWN]" in case of DNS problem instead of IPv6 address. Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25gcc: Don't use vectorized builtins when Neon is not thereKhem Raj2
Fixes [YOCTO #9991] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25sysprof: fix floating dependency on polkitMaxin B. John2
Fix the floating dependency on polkit by providing a PACKAGECONFIG option. Then, package the newly created files appropriately. [YOCTO #9987] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25kernel.bbclass: explicitly set workdir in do_bundle_initramfsAndré Draszik1
bitbake rev 67a7b8b02 "build: don't use $B as the default cwd for functions" (included in current bitbake master) breaks the assumption that do_bundle_initramfs runs inside the build directory. This causes kernel_do_compile() as called from within do_bundle_initramfs() to fail, as the former is not being executed from the correct directory anymore. (Note that kernel_do_compile() as called from bitbake directly doesn't suffer from that problem, as it inherits the workdir from base_do_compile() in that case.) Set workdir explicitly. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25kernel-uimage.bbclass: indeed update var KERNEL_IMAGETYPE_FOR_MAKEKai Kang1
The replace() method of the python string class doesn't replace in-place, then the var KERNEL_IMAGETYPE_FOR_MAKE doesn't be updated as design. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25musl: don't compile in mips16e modeAndré Draszik1
musl contains hand-written assembly which is not compatible with the MIPS16e mode. Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25lib/oe/path: Fix tar invocation with --no-recursionClemens Lang1
tar's --no-recursion flag only applies to files mentioned after the flag, which made it a no-op in this invocation of tar, because it was at the end of the command line. This is simple to verify with GNU tar 1.29: | $ mkdir foo | $ mkdir foo/dir | $ touch foo/dir/file | $ tar -cf - foo --no-recursion | tar t | foo/ | foo/dir/ | foo/dir/file | $ tar -cf - --no-recursion foo | tar t | foo/ Modify the code so that it actually does what the comment says by moving the flag in front of the --files-from argument. Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25gcc: Fix libgcc unresolved symbols with PIE on muslKhem Raj2
Fixes [YOCTO #9772] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25webkitgtk: Do not use gold with clangKhem Raj1
clang cross compiler fails to detect gold linker from cross-binutils, instead it defaults to ld.gold from build host, lets disable using gold when clang is active to avoid this issue Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25insane: only check ${S} exists if we had sources to fetchRoss Burton1
Only check that ${S} actually exists if there was something in ${SRC_URI} to fetch, the argument being that if SRC_URI is empty the the recipe won't be using ${S} at all. In general recipes that have no sources can remove the unpack task, but expecting all recipes to do this relatively advanced operation isn't realistic. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25lib/oe/gpg_sign: fix output in error pathsRoss Burton1
oe.utils.getstatusoutput() is a wrapper for subprocess.getstatusoutput() which uses Universal Newlines, so the output is a str() not bytes(). Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25python-smartpm: add support to check signaturesmingli.yu@windriver.com3
RPMv5 has removed support for _RPMVSF_NOSIGNATURES, the flag can be replaced with a flags set: "RPMVSF_NODSAHEADER|RPMVSF_NORSAHEADER|RPMVSF_NODSA RPMVSF_NORSA" Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com> Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25openssh: conditional compile DES code.mingli.yu@windriver.com3
After openssl disabled DES, openssh fails to build for some DES codes are not wrapped in conditional compile statement "#ifndef OPENSSL_NO_DES" and "#endif". Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com> Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25packagefeed-stability.bbclass: copy all packages of a recipeRobert Yang1
A recipes can generate several rpms such as a.rpm, a-dev.rpm, a-dbg.rpm, when update one of them in the repo, we'd better update all of them, otherwise, there might be a-dev.r0.1.rpm and a-dbg.r0.3.rpm in the repo, which looks strange. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25packagefeed-stability.bbclass: minor fixesRobert Yang1
* fix for python3 iteritems() -> items() * Return immediately for native and cross. * Remove the usage of __BBDELTASKS, there is no such var in bitbake. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25packagefeed-stability: add class to help reduce package feed churnPaul Eggleton1
When a dependency causes a recipe to effectively be rebuilt, its output may in fact not change; but new packages (with an increased PR value, if using the PR server) will be generated nonetheless. There's no practical way for us to predict whether or not this is going to be the case based solely on the inputs, but we can compare the package output and see if that is materially different and based upon that decide to replace the old package with the new one. This class effectively intercepts packages as they are written out by do_package_write_*, causing them to be written into a different directory where we can compare them to whatever older packages might be in the "real" package feed directory, and avoid copying the new package to the feed if it has not materially changed. We use build-compare to do the package comparison. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25package_deb.bbclass/package_ipk.bbclass: sort RPROVIDESRobert Yang2
The dict.fromkeys() creates a dict without order, there might be a problem when build the same recipe again, for example: - First build of make: Provides: es-translation, make-locale - Second build of acl: Provides: make-locale, es-translation They are exactly the same Provides, but tools like "diff" doesn't think so. Sort RPROVIDES will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25build-compare: improve deb and ipk checkingRobert Yang3
* The deb and ipk's depends version string is like: Depends: libc6 (>= 2.24) Update trim_release_old and trim_release_new to match the bracket in the end ")". * The deb's data tarball now is .tar.xz, and ipk's is .tar.gz. * Update adjust_controlfile() to make ituse trim_release_old and trim_release_new. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25build-compare: fix checking for named pipe and othersRobert Yang4
* Fixed checking for named pipe * Return at once when archives are the same * Fix for type "directory" Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25build-compare: make pkg-diff.sh 75% fasterRobert Yang2
The rpm tool is a heavy process, pkg-diff.sh ran 16 (or 17 for kernel) "rpm -qp" times when the pkgs are identical, now we only run "rpm -qp --qf <all we need>" twice (one is for old pkg, and one is for new), save the results to spec_old and spec_new, then use sed command to get what we need later, this can make it 75% faster when the pkgs are identical. Here is the rough data on my host Ubuntu 14.04.4, 32 cores CPU and 128G mem: * When the pkgs are identical: - Before the patch: 1s - After the patch: 0.26s I compare the whole spec firstly, and return 0 if they are the same, or go on checking one by one if not, without this, it would be 0.46s, the gain is great when there are lot of packages, usually, we have more than 10,000 rpms to compare. * When the pkgs are different: That depends on where is the different, if the different is at the comparing rpmtags stage: - Before the patch: 0.26s - After the patch: 0.29s Increased 0.03s, but if the different is happend later than comparing rpmtags, it will save time. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25build-compare: remove space at headRobert Yang2
The command like: rpm -qp --nodigest --nosignature --qf '<foo> [%{REQUIRENAME}\n]\n' ^^space The space will be printed, and will impact the check result, so remove it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25rpm: make --nosignature workRobert Yang2
OE-core uses rpm's --nosignature, but it never worked: self._invoke_smart('config --set rpm-check-signatures=false') Now fix it with: * Define SUPPORT_NOSIGNATURES to 1 in system.h * !QVA_ISSET(qva->qva_flags, SIGNATURE) -> QVA_ISSET(qva->qva_flags, SIGNATURE), otherwise, when use --nosignature would read database and verify signature, this is not expected. This can fix some race issues, for example, when more than one process are querying rpm file with "rpm -qp --nosignature", they may hang up because of race issues (the processes are trying to get RW/RD lock on the database, but they shouldn't read the database at all since -qp and --nosignature are used). Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25package_deb.bbclass: fix Python 3 errorMatt Madison1
Don't modify an OrderedDict while walking its keys. Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25piglit: Add build fix patchJussi Kukkonen2
Fixes [YOCTO #9851] (fingers crossed). Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25avahi: fix resource temporarily unavailable issueKai Kang2
It sometimes fails to run avahi with error: "Could not receive return value from daemon process". It has same root cause with https://github.com/lxc/lxc/issues/25. Backport patch to fix this issue. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25pulseaudio: fix floating dependency on webrtc-audio-processingTanu Kaskinen1
The webrtc-audio-processing library isn't yet packaged for OpenEmbedded, but let's add a packageconfig entry for it anyway to avoid problems in the future. Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25pulseaudio: 8.0 -> 9.0Tanu Kaskinen9
Release notes: https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/9.0/ Rebased 0001-client-conf-Add-allow-autospawn-for-root.patch. Removed 0001-Revert-module-switch-on-port-available-Route-to-pref.patch, because the issues that were caused by the reverted commit have been fixed. The patch set that fixes the initial selection of HDMI profiles (YOCTO#8448) is replaced with updated patches cherry-picked from upstream. Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25libsndfile1: 1.0.26 -> 1.0.27Tanu Kaskinen1
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25classes/populate_sdk_ext: show progress when preparing build systemPaul Eggleton2
During the extensible SDK installation process the final step is to prepare the internal copy of the build system. This can take some time, especially if you have SDK_EXT_TYPE set to "minimal" (downloading sstate artifacts) and SDK_INCLUDE_PKGDATA set to "1" (restoring pkgdata for world). To make this a bit less painful, use BitBake's new quiet mode to display status during this operation so you have some idea of how it's progressing; instead of redirecting the output to preparing_build_system.log we grab the last console log and append it instead. One result of this change is that you get the errors printed on the console during normal output rather than this going to the preparing_build_system.log file first. In OE-Core revision 227d2cbf9e0b8c35fa6644e3d72e0699db9607fa, we changed to always print the contents of preparing_build_system.log on failure, but now at least the error contents of that log is duplicated. Besides, I intentionally didn't print out the contents of that log during normal usage because it's quite verbose - the bug that we were attempting to fix was about not getting this information when seeing failures in the automated tests, thus I've moved printing the log to the test handling code instead. Part of the implementation for [YOCTO #9613]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25layer.conf: bump version for uclibc removal and LSB updateRoss Burton1
As of oe-core layer version 9, uclibc has been removed and LSB approximates version 5 (which means that Qt 3 isn't required for LSB conformance). Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25uclibc: removeRoss Burton16
uclibc is showing its age now and upstarts like musl are approximately the same size but with far more features and active maintainers. Remove uclibc from oe-core and use endorse musl as the lighter alternative to full-fat glibc. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25LSB: 4.1.0 -> 5.0Dengke Du4
According to the LSB 5.0 Release Notes, FHS Released, Qt3 removed and evoloved its module strategy which you can access from the site: https://wiki.linuxfoundation.org/en/ReleaseNotes50 So we make two changes to comply with the LSB 5.0: 1. Remove the lsb-test-qt3-azov-*.rpm test package and delete the test session. 2. Update the test packages. Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25webkitgtk: Switch the ARMv7 build to Thumb2 and enable back the JSC JIT.Carlos Alberto Lopez Perez1
* The JSC JIT is broken on ARMv7 without Thumb2. [YOCTO #9474] Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25quota: make compile pass when disable rpcKai Kang6
When 'rpc' is not in PACKAGECONFIG, option '--disable-rpc' is passed to configure and then compile fails. Backport patches to make quota build successfully. Update fcntl.patch that part of the patches are added by 0002-Allow-building-on-systems-that-do-not-have-rpc-heade.patch. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: De-couple framebuffer console from Weston for systemd startupTom Hochstein2
The framebuffer console was using the same I/O as Weston. We fix this by having openvt switch to the new VT when starting weston-launch, same as is already done for the sysvinit case. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: Fix weston-start to handle 0 or 1 argsTom Hochstein1
The parser incorrectly treated anything less than 2 args as an error. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25weston-init: Fix weston-start to allow weston args without openvt argsTom Hochstein1
The parser didn't properly handle commands of the form weston-start -- <weston-options>. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-25ccache: 3.2.4 -> 3.2.5Robert Yang3
Add Revert-Create-man-page-in-the-make-install-from-git-.patch to disable asciidoc since we don't have it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gettext-minimal-native: 0.19.4 -> 0.19.8.1Robert Yang8
How to upgrade gettext-minimal-native: - Build gettext-native - Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and gettext-runtime/po/remove-potcdate.sin from gettext-native. - Update COPYING when needed (usually update the year), do not copy the whole COPYING file from gettext-native. - Go to gettext-native's ${S}/gettext-runtime/m4: > Remove lt*.m4 and libtool.m4 > copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/gnulib-m4/ > tar czvf /path/to/aclocal.tgz *.m4 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gettext: 0.19.6 -> 0.19.8.1Robert Yang3
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25slang: 2.2.4 -> 2.3.0Robert Yang7
* Removed: change-char-type-to-signed-char-in-macros.patch sprintf-bug-concerning-8-bit-characters.patch They are already in the source. * Updated: fix-check-pcre.patch fix-check-pcre.patch slang-fix-the-iconv-existence-checking.patch * Use SECURITY_NO_PIE_CFLAGS for SECURITY_CFLAGS, it can't be built with "-pie -fpie": tmp/sysroots/qemux86-64/usr/lib64/../lib64/Scrt1.o: In function `_start': /usr/src/debug/glibc/2.24-r0/git/csu/../sysdeps/x86_64/start.S:104: undefined reference to `main' /tmp/ccMFTA8A.o: In function `smg_char_at': /usr/src/debug/slang/2.3.0-r0/slang-2.3.0/modules/slsmg-module.c:134: undefined reference to `SLsmg_char_at' /tmp/ccMFTA8A.o: In function `smg_resume_smg': Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-25gnu-efi: 3.0.3 -> 3.0.4Robert Yang3
* Remove gnu-efi-Make-setjmp.S-portable-to-ARM.patch since it is already in the source. * Updated LIC_FILES_CHKSUM - The following files are gone: lib/arm/div64.S lib/arm/lib1funcs.S - Updated md5sum for other files, they add the following words, which are still GPLv2+: Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice and this list of conditions, without modification. 2. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. Alternatively, this software may be distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. * Remove -mfpmath=sse from TUNE_CCARGS since gnu-efi doesn't support sse to fix the problem: rtdata.c:1:0: error: SSE instruction set disabled, using 387 arithmetics [-Werror] * gnu-efi's Makefile treats prefix as toolchain prefix, so don't export it, otherwise there would be errors: /bin/sh: /usrgcc: No such file or directory * Add aarch64-initplat.c-fix-const-qualifier.patch to fix build on aarch64: initplat.c:44:35: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-27 21:00:22 +0000