summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2012-10-18xf86-input-evdev: bump to latest releaseRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-10-17cpan_build: Unify directory layout for native and target buildsPhil Blundell1
There seems to be no benefit in having them be different and this appears to cause a certain amount of confusion about paths for the native modules. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-10-17Add packagegroup-core-buildessentialColin Walters2
[Not heavily tested, but sent for discussion] task-core-sdk is too big - for example, I simply don't want to ship tcl, ever =) Historically distcc caused a large dependency graph explosion because it has a utility which uses gtk+, although that was fixed. packagegroup-core-sdk also includes coreutils, which is a bit confusing; conceptually things dependent on coreutils should pull it in explicitly, or possibly we just declare coreutils to be in the minimal build set. So packagegroup-core-buildessential is intended to be similar to Debian's "build-essential" package. It's the stuff needed by say 80+% of components, not worth repeating over and over. Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-10-17libtool: Ensure the paths to sed are not hardcodedRichard Purdie1
If you: bitbake sed-native bitbake libtool-cross then libtool-cross has SED="/path/to/sysroot/sed" which is incorrect. If that is reused from sstate or sed-native is cleaned, the build will fail. This patch simply sets sed to be "sed" since we're not on systems where the sed from PATH is broken. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-17pkgconfig: Drop automatic pkgconfig RDEPENDSRichard Purdie1
Just because a recipe uses pkgconfig, it doesn't mean that it's -dev package should RDEPENDS on pkgconfig. I can understand the thinking that lead to this but it makes sense to be able to install the package when pkgconfig hasn't been built. Currently you can also get failures where pkgconfig wasn't built yet a -dev package is included that depends on it leading to rootfs failures. I considered making this a RRECOMMENDS but it should probably be an RSUGGESTS at best given the tenuous pkgconfig requirement any given -dev package has. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-17package: Recommend virtual-locale-*, don't depend on itRichard Purdie1
The virtual-locale-* packages are provided by libc which may or may not have a matching locale for any given recipes's provided locales. Certainly, we shouldn't get a failure if the locale package isn't available. This patch therefore makes the dependency optional rather than required, allowing the locale packages in question to install. This resolves errors like: virtual-locale-eo is needed by bash-locale-eo-4.2-r5.i586 virtual-locale-en+boldquot is needed by bash-locale-en+boldquot-4.2-r5.i586 virtual-locale-en+quot is needed by bash-locale-en+quot-4.2-r5.i586 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-17libc-package: Drop bogus replacement operationRichard Purdie1
The names used to generate the binary-localdata packages need to match the location the dependencies are added. In one case the dash replacement is made, in the other it is not leading to packages which cannot be installed: eglibc-binary-localedata-af-za.iso88591 is needed by locale-base-af-za.iso-8859-1-2.16-r22.i586 eglibc-binary-localedata-cs-cz.iso88592 is needed by locale-base-cs-cz.iso-8859-2-2.16-r22.i586 eglibc-binary-localedata-ru-ru.koi8r is needed by locale-base-ru-ru.koi8-r-2.16-r22.i586 eglibc-binary-localedata-pl-pl.iso88592 is needed by locale-base-pl-pl.iso-8859-2-2.16-r22.i586 eglibc-binary-localedata-hu-hu.iso88592 is needed by locale-base-hu-hu.iso-8859-2-2.16-r22.i586 eglibc-binary-localedata-de-at+euro.iso885915 is needed by locale-base-de-at+euro.iso-8859-15-2.16-r22.i586 eglibc-binary-localedata-sv-fi.iso88591 is needed by locale-base-sv-fi.iso-8859-1-2.16-r22.i586 This fixes things so the names are consistent. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-15local.conf.sample: add PATH to SSTATE_MIRRORS commentsPaul Eggleton1
The shared state cache as pointed to by SSTATE_DIR by default now has two-character subdirectories to prevent there being an issue with too many files in the same directory; also, native sstate packages will go into a subdirectory named using the distro ID string. If you copy the newly structured sstate cache to a mirror location (either local or remote) and then point to it in SSTATE_MIRRORS, you need to append "PATH" to the end of the mirror URL so that the path used by bitbake before the mirror substitution is appended to the path used to access the mirror. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10gdbm: Resolve host contamination issueRichard Purdie1
The autoconf macros detect the presence of -ldbm or -lndbm on the host system and add the library to link against, for now good reason I can explain. This patch makes the build behave determinstically whether they're present or not. Other than the extra linkage, there doesn't appear to be any other change in behaviour from these options and they look like dead code. The extra linkage can cause problems where sstate is used on a machine where the extra librbary isn't present causing build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10pkgconfig: Drop the RREPLACES for pkgconfig-devRichard Purdie2
This line causes pkgconfig-dev to replace pkgconfig so the package with all the files in is replaced by one with no files. This makes no sense and hence we should just remove this broken line. At this point in the release, this is the safest way to fix this even if an empty -dev package is left available. [YOCTO #2878] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10eglibc: force make to use /bin/bashSaul Wold2
The eglibc core build still has a number of issues with /bin/dash. Recently found is both sysdeps/unix/make-syscalls.sh and it's output, which make calls via SHELL do not play well with /bin/dash. By force make to use /bin/bash via SHELL setting it works correctly. Currenly known issues are: make-syscalls.sh line with a bad substitution, which can be corrected by: vdso_symver="$(printf '%s\n' ${vdso_symver} | sed 's/\./_/')" Following that there is an issue with emiting a '\n' through a second echo and then to the compiler. There maybe more issues beyond that. [YOCTO #3080] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10perl: add archlib_exp variable used to generate ARCHLIB_EXP in config.hTom Zanussi3
perl.c uses an ARCHLIB_EXP define to generate compile-time code that adds the archlibexp path to @INC during run-time initialization of a new perl interpreter. Because we've changed this value in a temporary way to make it possible to use ExtUtils::Embed in the target build (the temporary value in config.sh gets re-stripped out during packaging), the ARCHLIB_EXP value that gets generated still uses the temporary version instead of the original expected version (i.e. becauses it's in the generated config.h, it doesn't get stripped out during packaging like the others in config.sh). This creates an unmodified version called archlib_exp that gets used by a modified config_h.SH to get the correct value into config.h This patch uses an unmodified version of archlibexp called archlib_exp, introduced to config.sh, which is used to generate the correct value of ARCHLIB_EXP into config.h Fixes [YOCTO #3099]. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10bzip license: bzip2 not bzip.Flanagan, Elizabeth1
The name of the license for bzip2 is wrong causing warnings to be thrown. Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10gcc-cross-canadian: Fix gettext dependencyRichard Purdie1
There was a problem in commit ad23395cd1f6c0cbfcc6980b6071d589f9f6cde0 since gettext-nativesdk was translated to gettext instead of nativesdk-gettext. This fixes to use the correct dependency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08linux-yocto/3.4: perf: parallel build and tools fixesBruce Ashfield3
korg commit 42dcd1f4e [perf tools: Fix parallel build] fixes parallel build issues that are being seen in the autobuilder. We also have a fix from Tom: [ perf annotate: replace 'expand' with equivalent sed expression We don't have 'expand' in our userspace so we need to accomplish the same thing using 'sed', which we do have. ] So we apply it to all BSP branches and kernel types. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08sstate: Also add datadir/sgl to sstate whitelist to avoid openjade warningRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08qemu: When applying qemu-mips workaround, check the file exists firstRichard Purdie1
If qemu-mips was disabled as done in some distros, this wrapper would fail. Therefore check if the file exists before wrapping it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08linux-yocto-tiny: Add tiny recipe for the 3.4 linux-yocto kernelDarren Hart1
This recipe builds the "tiny" kernel type defined by the linux-yocto meta-data. Support is defined for the qemux86 machine via common-pc-tiny.scc in the linux-yocto meta branch. The resulting kernel is 1.8 MB and boots to a serial console with with qemux86 and core-image-minimal using the following command: qemu -kernel tmp/deploy/images/bzImage-qemux86.bin -initrd tmp/deploy/images/core-image-minimal-qemux86.cpio.gz -append "root=/dev/ram0 console=ttyS0" -nographic Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08nfs-export-root: add explict no_subtree-check to suppress warningSaul Wold2
exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08linux-yocto/3.4: tiny: Add qemu KMACHINE to common-pc-tiny.sccBruce Ashfield1
Updating the meta SRCREV to pickup the following change: Ensure the qemux86 machine is defined in common-pc-tiny as it is for -standard and -rt. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-08linux-yocto/3.4: fix kconfig warnings and unnecessary optionsBruce Ashfield1
Updating the kernel configuration fragments to fix the following issues: - remove options that are no longer in the 3.4 kernel - disable unused, but large kernel modules - fix kconfig audit warnings for x86 BSPs - make uprobes reusable by multiple fragments The following meta branch commits are represented by this update: 3da1172 uprobes: split into enable and patch fragments 17ec51a meta: cleanup invalid/obselete 3.4 CONFIG options b5cee42 meta: disable OCFS2 by default efe937e meta: drm: tag DRM options as 'hardware' 10b5155 meta: emenlow: clean emenlow configuration warnings a907b82 meta: add CONFIG_SHMEM to standard kernel config Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-07pulseaudio: ensure X11 and consolekit are disabledSaul Wold2
When DISTRO_FEATURES does not include X11 ensure that both x11 and gtk are diabled correctly. ConsoleKit also has x11, so ensure that any RDEPENDS is also excluded. The flags for x11 changed at somepoint to use enable/disable, but this recipe was not updated. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-07package_rpm.bbclass: Fix an issue where complementary installs failMark Hatle1
Also ensure that we always cleanup the temporary install manifest files, some of them will cause problems if they exist in multiple install attempts. Finally verify that the lists remain uniquely sorted otherwise the complementary install may install the same files numerous times, triggering a failure. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-05sstate: Add extra entries to the sstate duplicate files whitelistRichard Purdie1
This avoids errors where gcc/binutils get installed to the native sysroot in the same location for multiple package architectures. Ultimately making these native recipes with ${PACKAGE_ARCH} appended to PN will resolve this but hide the warnings until this gets sorted out. Also hide the python and docbook catalog warnings since they're known about, nothing to worry about and we'll aim to clean them up properly in the 1.4 cycle. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-05sstate: Normalise paths before comparing with the whitelistRichard Purdie1
Without this, path components like // could break comparisions with the whitelist leading to warnings being displayed to the user unintentionally. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-05libdrm: Explicitly disable the cairo dependencyRichard Purdie3
We don't want the cairo dependency. Unfortunately simply checking whether its present isn't good enough. If its not in DEPENDS, it can disappear half way through building. We therefore need to explictly disable it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-05toolchain-scripts.bbclass: Export M4Khem Raj1
some packages use M4 variable from environment and sometimes its hardcoded to /usr/bin/m4 if not found in environment. Lets define it such that it is picked from path Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-05cross-canadian.bbclass: add native chrpath dependencyLaurentiu Palcu1
In order for the RPATHs in 32bit toolchain binaries to be relocated properly, chrpath >=0.14 is needed. [YOCTO #3161] [YOCTO #3201] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-04common-licenses: Adding bzipFlanagan, Elizabeth1
bzip requires it's own specific license. Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-04build-appliance-image: Fix spacing in DESCRIPTIONPaul Eggleton1
Fixes [YOCTO #2636] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-04shutdown-desktop: ensure the postinst script succeedsRoss Burton1
When the hostname isn't qemuarm the grep fails so the postinst fails. Stop this happening by explicitly evaluating true. [YOCTO #3224] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-04sato-icon-theme: use gtk-icon-cache helper classRoss Burton2
Instead of explicitly updating the icon cache use the helper class that also forces a loader update at the same time. This eliminates the possibility of updating the icon cache without any gdk-pixbuf loaders. Also check that the Sato icon theme isn't already set to avoid appending to the file every time the postinst runs. [YOCTO #2399] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03distrodata: Update distrocheck functionsSaul Wold2
Fix the distro check functions for the change of nativesdk being a suffix to a prefix. Also added crosssdk as another case for converting to PN for matching in the distro_tracking Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03rpmresolve: fix reporting of multiple matches errorPaul Eggleton2
We were mistakenly writing what was meant to go to stderr into the output file, so when the "Multiple matches" error showed we weren't actually seeing the matches printed. Also change the wording of the "Unable to find package..." to "Unable to resolve package..." instead so that it makes more sense if it is printed after the "Multiple matches" error. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03buildhistory_analysis: update to use explode_dep_versions2()Paul Eggleton1
Handle where multiple version specifications are present for the same dependency. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03wpa-supplicant: don't break the DBus service fileRoss Burton2
The recipe exports $BINDIR as ${sbindir} and the build system uses this when writing the DBus service file, so sedding it and replacing $base_sbindir with $sbindir (/sbin and /usr/sbin) isn't useful when it ends up as /usr/usr/sbin/wpa_supplicant. [YOCTO: #3202] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03xf86-video-intel: drop libxvmc dependencyRoss Burton2
xvmc is explicitly disabled, so remove the dependency. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03qemu: add wrapper for qemu-mips binaryLaurentiu Palcu1
qemu-mips user emulation binary segfaults when running any kind of binary. This is due to a MMU access fault in the virtual CPU. This problem has been introduced in qemu when 4GB of vmem were reserved for 32-on-64 bit. This workaround will need to be reverted once the proper fix is found. [YOCTO #3143] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03e2fsprogs: Don't install findfsPhil Blundell1
This binary is provided by util-linux nowadays. Fixes: WARNING: The recipe is trying to install files into a shared area when those files already exist. Those files are: /fast/jenkins/workspace/.../tmp-eglibc/sysroots/x86_64-linux/sbin/findfs Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03bzip2 and busybox: Incorrect LICENSEElizabeth Flanagan2
The license for bzip2 is not quite BSD. I have an email out to the maintainer to see if we can utilize a common BSD license (or something else) however, for now, we should revert bzip2 back to a special license. As busybox also utilizes a lightly modified bzip2, this also effects busybox. Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03package.bbclass: Fix regression in -dbg packages introduced by ↵Richard Purdie1
explode_dep_versions change We need to iterate over the dictionary pulling out the values, not take the top level keys. If we don't do this, we end up with dependencies on the values of PACKAGES, not library dependencies. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-03qt4: Avoid circular dependencies with multilibRichard Purdie4
Without this, circular dependencies are found when attempting to build multilib versions of qt4 (or bitbake world in a multilib enabled build). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-02bitbake.conf: Add CCACHE_DISABLE to BS_HASHBASE_WHITELISTMike Crowe1
If CCACHE is in the whitelist then CCACHE_DISABLE probably should be too. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-02busybox: Add missing INITSCRIPT_NAME_${PN}-hwclockRichard Purdie2
Fix failures like: Configuring busybox-hwclock. usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN] update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] . -n: not really -f: force -v: verbose -r: alternate root path (default is /) -s: invoke start methods if appropriate to current runlevel Collected errors: * pkg_run_script: package "busybox-hwclock" postinst script returned status 1. * opkg_configure: busybox-hwclock.postinst returned 1. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-02qt4: add 4.8.3 version with negative D_PMartin Jansa28
* rebased patches, 3 patches are resolved upstream: 0019-javascriptcore-Fix-compile-error-when-using-toolchai.patch resolved in upstream commit 7ac8d8597db1f58b11338f91fb27f6ad8696b34b 0022-webkit-fix-conflicting-types.patch resolved in upstream commit929b4443d53fcf3a7ad1cb9f3af5569e41ef56f1 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-10-02qt4: PR bumpsMartin Jansa5
* sofar only formal changes, but to test that everything still builds the same Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-10-02qt4: replace all local patches with git patches with headersMartin Jansa34
* in preparation for upgrade to 4.8.3 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-10-02qt4: drop patches not used in any recipeMartin Jansa4
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-10-02qt4: move patches from files to qt4-4.8.1Martin Jansa15
* faster lookup in FILESPATH as small bonus Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-10-02qt-mobility: move qt-mobility patches to separate dirMartin Jansa6
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 06:12:20 +0000