summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2016-10-26build-appliance-image: Update to master head revisionRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-26linux-yocto/4.8: sync preempt-rt with upstream projectBruce Ashfield3
The initial 4.8 -rt feature was directly from Paul Gortmaker, and now the 'upstream' -rt has done a release on the same kernel version. Paul has sync'd the initial effort with the upstream work, and we now have a consolidated standard/preempt-rt/* Along with the rsync'd content, Paul has fixed -rt boot on 32 bit x86. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-25image_types: Use softer setting of WKS_FILESaul Wold1
This will allow for more flexibility and overrides in BSP layers. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-25buildstats: check IMAGE_ROOTFS exists before checking its sizeMikko Ylinen1
After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are correctly checked if the rootfs size check fails. In case of a failure a build error is triggered. However, there are cases where this is known to fail (e.g., with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS). Because of that, check IMAGE_ROOTFS exists before trying to get the size of it. Also, in case of any error catched as err, simply print out a warning. Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-25build-appliance-image: add /sbin to PATHJuro Bystricky1
runqemu script fails with an error when executed in Build Appliance. Typical use case: $ bitbake core-image-minimal $ runqemu qemux86 Observed error: runqemu - ERROR - In order for this script to dynamically infer paths ...snip... runqemu-ifup, runqemu-ifdown or ip not found The error is caused by the fact that "ip" is located in /sbin, however /sbin is not in user's ("builder") PATH. To fix this we add /sbin to PATH. The simplest place to do this is in user's .bashrc. [YOCTO#10434] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-25linux-yocto/4.8: update to v4.8.3Bruce Ashfield3
Integrating the korg -stable release One commit of note is the fix for CVE-2016-5195 (http://dirtycow.ninja/): mm: remove gup_flags FOLL_WRITE games from __get_user_pages() The remaining changes are covered by the following shortlog export: mm: remove gup_flags FOLL_WRITE games from __get_user_pages() Make __xfs_xattr_put_listen preperly report errors. scsi: configure runtime pm before calling device_add in scsi_add_host_with_dma v4l: rcar-fcp: Don't force users to check for disabled FCP support Linux 4.8.2 tpm_crb: fix crb_req_canceled behavior tpm: fix a race condition in tpm2_unseal_trusted() ima: use file_dentry() Bluetooth: Add a new 04ca:3011 QCA_ROME device ARM: cpuidle: Fix error return code ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs ARM: dts: mvebu: armada-390: add missing compatibility string and bracket ARM: fix delays x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access x86/mm/pkeys: Do not skip PKRU register if debug registers are not used arch/x86: Handle non enumerated CPU after physical hotplug x86/apic: Get rid of apic_version[] array x86/platform/intel-mid: Keep SRAM powered on at boot x86/platform/intel-mid: Add Intel Penwell to ID table x86/cpu: Rename Merrifield2 to Moorefield x86/pkeys: Make protection keys an "eager" feature x86/irq: Prevent force migration of irqs which are not in the vector domain x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation arm64: fix dump_backtrace/unwind_frame with NULL tsk KVM: PPC: BookE: Fix a sanity check KVM: arm/arm64: vgic: Don't flush/sync without a working vgic KVM: arm64: Require in-kernel irqchip for PMU support KVM: MIPS: Drop other CPU ASIDs on guest MMU changes KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register xen/x86: Update topology map for PV VCPUs mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled mfd: 88pm80x: Double shifting bug in suspend/resume mfd: atmel-hlcdc: Do not sleep in atomic context mfd: rtsx_usb: Avoid setting ucr->current_sg.status ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants ALSA: ali5451: Fix out-of-bound position reporting phy: sun4i-usb: Use spinlock to guard phyctl register access usb: dwc3: fix Clear Stall EP command failure timekeeping: Fix __ktime_get_fast_ns() regression usb: storage: fix runtime pm issue in usb_stor_probe2 Linux 4.8.1 ALSA: hda - Add the top speaker pin config for HP Spectre x360 ALSA: hda - Fix headset mic detection problem for several Dell laptops ALSA: hda - Adding one more ALC255 pin definition for headset problem Revert "usbtmc: convert to devm_kzalloc" USB: serial: cp210x: Add ID for a Juniper console usb: usbip: vudc: fix left shift overflow Staging: fbtft: Fix bug in fbtft-core usb: misc: legousbtower: Fix NULL pointer deference Using BUG_ON() as an assert() is _never_ acceptable arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP Using BUG_ON() as an assert() is _never_ acceptable Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-25linux-yocto/4.1: fix CVE-2016-5195 (dirtycow)Bruce Ashfield3
Backporting commit 19be0eaffa [mm: remove gup_flags FOLL_WRITE games from __get_user_pages()] to address the dirtycow exploit. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-25linux-yocto/4.4: update to v4.4.26Bruce Ashfield3
Integrating the 4.4.23->26 -stable releases. Among other fixes this contains commit: mm: remove gup_flags FOLL_WRITE games from __get_user_pages() Which addresses CVE-2016-5195. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-19kern-tools: make patches with shell-unsafe characters validBruce Ashfield1
If a patch contains characters like ; or (), it can cause processing errors in the patch queue. We had previously fixed this issue by renaming the patches to not include invalid characters, but with this change to the kern tools that ensures patch names are wrapped in quotes, we avoid shell processing and hence they are valid. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-19linux-yocto/4.4/4.8: kernel config warning cleanupsBruce Ashfield6
Merging the following patches into 4.4 and 4.8 to remove kernel configuration warnings: bbaf01752b01 meta-yocto-bsp: beaglebone: remove the stale kernel options 552a83790b17 features: Fix configcheck warnings in features used by intel-quark BSPs c33d9c2c575f features: Fix configcheck warnings in features used by intel-core* BSPs Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-19local.conf.sample.extended: remove RM_OLD_IMAGEJoshua Lock1
RM_OLD_IMAGE has been removed so don't include this variable in sample local.conf Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-15build-appliance-image: Update to master head revisionRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-15binutils: Fix gas error with cfi_section inconsistenciesKhem Raj2
This error is visible when using clang but not when using gcc this has been reported and fixed upstream. llvm bug https://llvm.org/bugs/show_bug.cgi?id=29017 binutils bug https://sourceware.org/bugzilla/show_bug.cgi?id=20648 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libxml2: Make tests non-executableJussi Kukkonen1
The XML W3C conformance test suite contains thousands of xml files all marked executable. We dutifully try to strip all these files of debug info in do_package. "chmod -x" improves build time by ~40 seconds. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15bind: fix two CVEsZheng Ruoqin3
Add two CVE patches from upstream git: https://www.isc.org/git/ 1.CVE-2016-2775.patch 2.CVE-2016-2776.patch Signed-off-by: zhengruoqin <zhengrq.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15rpm: prevent race in tempdir creationMarkus Lehtonen3
This patch fixes an extramely rare race condition in creation of rpmdb temporary directory. The "rpmdb-more-verbose-error-logging" patch is still left in place, just for the case. [YOCTO #9416] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15insane.bbclass: fix package_qa_check_arch() for mips64-o32Robert Yang1
Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on /work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch] The mips64-n32 works since it would set ABIEXTENSION to "n32" so that TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32" doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend. Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem. Another way to fix the problem is define ABIEXTENSION to "o32" or "32" for mips64-o32, but that may make things confused since "o32" is purely 32 bit. [YOCTO #10305] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15arch-mips.inc: remove duplicates from PACKAGE_ARCHSRobert Yang1
Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Error, the PACKAGE_ARCHS variable contains duplicates. The following archs are listed more than once: mips64-o32 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15ppp: fix building with linux-4.8Jackie Huang2
Fix a build error when using the linux-4.8 headers that results in: In file included from pppoe.h:87:0, from plugin.c:29: ../usr/include/netinet/in.h:211:8: note: originally defined here struct in6_addr ^~~~~~~~ In file included from ../usr/include/linux/if_pppol2tp.h:20:0, from ../usr/include/linux/if_pppox.h:26, from plugin.c:52: ../usr/include/linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6' struct sockaddr_in6 { ^~~~~~~~~~~~ Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15Revert "linux-libc-headers: fix in/if.h includes"Jackie Huang2
This issue is fixed in the ppp recipe. This reverts commit 7c6b78ac8e2b176f77178c3dd12d8455be10845d. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15populate_sdk_ext: explicitly set DL_DIRRoss Burton1
The eSDK generation assumes that DL_DIR is downloads/ under the build directory, and puts files such as a freshly buily uninative tarball in there expecting bitbake will find it later. Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in bitbake.conf, and any instances of DL_DIR are removed from the original local.conf, there is still the possibility that other layers could contain a site.conf that assigns DL_DIR. If this happens the errors are quite mysterious as it fails to find the uninative tarball and so the hashes all change, and eSDK building fails. Ensure that this cannot happen by explicitly assigning the DL_DIR that we require, instead of assuming that the default value will be used. [ YOCTO #10439 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15sqlite3: Revert ad601c7962 from 3.14.1 amalgamation packageJianxun Zhang2
It turns out this change between 3.12.2 and 3.13 introduces a 2% increase of build time based on statistic data in bz10367. The added patch is forged by diffing the new sqlite3.c generated from reverting the change in raw source of sqlite3 project, and then manually migrate the delta to a sqlite3.c from the 3.14.1 tarball package because what recipes reference is actually a generated C code (amalgamation) release package and we cannot apply the real change to 3.14.1 cleanly due to so many changes happened. Fixes [YOCTO #10367] Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15linux-yocto.inc: ensure do_kernel_link_images runs before do_stripAndre McCurdy1
If the do_kernel_link_images task is enabled, then it needs to run before do_strip. The addtask statement for do_strip makes that explicit. For consistency, make it explicit in the addtask statement for do_kernel_link_images too. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15binutils: fix for MIPS "Can't find matching LO16 reloc" errorsAndre McCurdy2
Patch taken from Binutils Bugzilla: https://sourceware.org/bugzilla/show_bug.cgi?id=20649 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libgpg-error: Make case generic for MIPSZubair Lutfullah Kakakhel1
The tuples for MIPS r6 onwards are - mipsisa32r6el - mipsisa32r6 - mipsisa64r6el - mipsisa64r6 The default case passes it forward which isn't handled well and causes a build error. Rework the case statement to make it generic. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15live-vm-common.bbclass: Allow to use different kernel image than ↵Martin Jansa1
KERNEL_IMAGETYPE for /vmlinuz * syslinux config hardcodes kernel image as /vmlinuz add warning message when the selected image doesn't exist and allow to select different image with VM_DEFAULT_KERNEL variable (qemuboot.bbclass is using QB_DEFAULT_KERNEL) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15image_types.bbclass: add dependency do_image_wic -> do_bootimgEd Bartosh1
To produce certain types of images wic uses do_bootimg results to assemble final image. For example, it copies BOOT/EFI directory produced by do_bootimg to boot partition for every EFI image. The tricky part of this is that do_bootimg task is not always run, so we can't always make do_image_wic depend on do_bootimg. We only need to do it if do_bootimg present in task graph. Thank to Cristopher Larson for this fix. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libxcb: use python3 to build itRobert Yang2
Backport Fix-inconsistent-use-of-tabs-vs.-space.patch to make it can be built by python3. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15xcb-proto: fix for python3Robert Yang3
Backport two patches to make it py3 friendly. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15xcb-proto: create .pyc files for python2Robert Yang1
Its Makefile's do_install creates .pyc files for python3, now also create them for python2 so that they will be recorded by manifest, and can be cleaned correctly. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15package_tar: avoid chdir warnings and restore cwd after packagingRobert Yang1
Fixed: WARNING: attr-2.4.47-r0 do_package_write_tar: Task do_package_tar changed cwd to /path/to/attr/2.4.47-r0/packages-split/attr-locale-sv Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15source-highlight: use with-boost-libdirRobert Yang1
Without with-boost-libdir, it checks lib64 libx32 lib lib64 in sysroot/usr/ and set it as boost lib path if it exist, this is unreliable when build with multilib. Fixed when switch baselib from lib64 to lib, for example, when we build qemux86-64 + multilib setting, the baselib is lib64, and when disable multilib, it would be lib, then we may see the error when do_configure since lib64 may exist during build source-highlight: configure: error: Could not find a version of the Boost::Regex library! Steps to reproduce: MACHINE = "qemux86-64" require conf/multilib.conf MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "x86" $ bitbake world Then: MACHINE = "qemux86-64" $ bitbake source-highlight Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15insane.bbclass: Additional "mips" and "mipsel" machine definitionsJuro Bystricky1
Add "mips" and "mipsel" to "machdata" table. Although there is a way to add entries to the "machdata" table from a BSP without modifying the insane.bbclass directly, MIPS is already supported in poky and as such the relevant entries should be present in insane.bbclass. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15kernel-arch.bbclass: Add xtensa and arc into valid_archs tableJuro Bystricky1
Both "arc" and "xtensa" are valid Linux architectures, add them into valid_archs table. Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libxrender: remove spurious build dependencyRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libxext: remove spurious dependenciesRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15libxext: remove stale git recipeRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15cmake: improve CMAKE_SYSTEM_PROCESSOR assignment in nativesdkRoss Burton1
The previous string manipulations would result in the wrong string being used for machines such as intel-corei7-64 as the sysroot was split at the first hyphen (so would result in corei7 instead of corei7-64). Change the logic so that it looks for processor-distro-os and uses the whole of the processor field. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15cmake: also set CMAKE_FIND_ROOT_PATH_MODE_PACKAGERoss Burton1
The other CMAKE_FIND_ROOT_PATH_MODE_* variables were already set to ONLY, but PACKAGE was left out. Fix this so that cmake doesn't look on the host for cmake modules when it should only be looking in the target sysroot. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15base-files: fix profile error under < /dev/nullRichard Tollerton1
Previous attempts to constrain execution of `resize` to only TTYs did not properly handle situations when `tty` would return the string "not a tty". The symptom is "/etc/profile: line 34: test: too many arguments". Fix this by utilizing the exit code of `tty`. Also use `case` instead of `cut` to eliminate a subshell. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15x86-base: Update version to 4.8Saul Wold1
This update will avoid confusion with other parts of OE-Core that set the kernel version to 4.8 for qemux86* and genericx86*. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15pixbufcache: handle gdk-pixbuf not being presentRoss Burton1
It's possible - albeit unlikely - that gdk-pixbuf isn't present in the sysroot when a recipe inheriting this class is and the sysroot is finalised. One example would be if the sstate archive has librsvg but not gdk-pixbuf: librsvg will be extracted from the sstate but gdk-pixbuf will be built to "fill in the gap". In this situation the setscene completion hook installed by pixbufcache.bbclass will attempt to execute gdk-pixbuf-query-loaders, but that binary hasn't been installed by gdk-pixbuf yet. Also add gdk-pixbuf-native to DEPENDS in native builds to ensure that the binaries we expect will be present, as it's possible to build loaders without linking to GdkPixbuf. [ YOCTO #10420 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15librsvg: remove redundant assignmentRoss Burton1
PIXBUFCACHE_SYSROOT_DEPS was removed in oe-core b41108, so remove this assignment to avoid confusing people reading the recipe. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15Remove RM_OLD_IMAGE, it's no longer usefulJoshua Lock7
Since the move to put image deployment under sstate control in d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically removed before a new image is deployed (the default behaviour of the sstate logic). RM_OLD_IMAGE is therefore no longer required to provide this behaviour, remove the variable and its users. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-11build-appliance-image: Update to master head revisionRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11classes/externalsrc: re-run do_configure when configure files changePaul Eggleton3
If the user modifies files such as CMakeLists.txt in the case of cmake, we want do_configure to re-run so that those changes can take effect. In order to accomplish that, have a variable CONFIGURE_FILES which specifies a list of files that will be put into do_configure's checksum (either full paths, or just filenames which will be searched for in the entire source tree). CONFIGURE_FILES then just needs to be set appropriately depending on what do_configure is doing; for now I've set this for autotools and cmake which are the most common cases. Fixes [YOCTO #7617]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11sdk-installer: Fix unclear SDK installer messageTodor Minchev1
When the host and the SDK architectures are incompatible the SDK installer outputs an incomplete error message "Error: Installation machine not supported!". This commit adds a more verbose error message e.g "Error: Incompatible SDK installer! Your host is i686 and this SDK was built for x86_64 hosts." Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11sysklogd and busybox: ignore return code from init script stopMarkus Lehtonen2
The init script will return '1' if we try to stop the service and it is not currently running. The prerm scriptlet must not fail because of this because it will cause package deinstallation of upgrade fail if opkg package manager is used. [YOCTO #10299] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11update-rc.d.bbclass: ignore init script return codeMarkus Lehtonen1
We need to ignore the return code from the init script 'stop' command in the preinst and prerm scriptlets. Otherwise package upgrade or deinstallation (at least when opkg is used) is likely to fail if the daemon is not running. That is because an init script possibly returns '1' if you try to stop a service that is not running which, in turn, causes the scriptlet to fail which, in turn, causes the package (de-)installation to fail. [YOCTO #10299] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11insane: display names instead of ELF machine numbersRoss Burton1
The 'arch' QA test currently simply outputs the ELF machine field as a number which isn't helpful. Display this as a human-readable name to make it clearer to the user what the problem is. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 02:52:24 +0000