summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2013-05-30python-smartpm: add gettext-native to DEPENDSPaul Eggleton1
Fixes the following failure at do_install building python-smartpm-native if gettext-native has not already been built and gettext tools are not installed on the host: | compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo | sh: msgfmt: command not found ... | creating $D/usr/share/share/locale/it/LC_MESSAGES | error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file Note that we need gettext-native in DEPENDS and not "inherit gettext" here because for native variants, gettext.bbclass instead adds gettext-minimal-native to DEPENDS and that does not provide the msgfmt command. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30portmap: /etc/init.d/portmap restart complains "command not found"Amy Fong1
portmap splits pmap_dump and pmap_set into a different package: portmap_utils. Since this package might not be installed, I introduce another init file that tests for the existance of these apps before trying to run the pmap_* commands. Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30libarchive: Fix build dependenciesMark Hatle1
Move to using the PACKAGECONFIG mechanism to select configure options and dependencies. Without this the system will attempt to discover various dependencies, and usually does so incorrectly. We also ensure that the nativesdk version does not inherit any of the DISTRO_FEATURES. We shouldn't need acl or xattr support for nativesdk. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Avoid unnecessary timestamp calculationPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Make the mode number readable in debug messagesPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Correct the device number calculation for blocks of devicesPeter Kjellerstedt1
If the increment > 1 and the start > 0 then the calculation for the minor device number was incorrect. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Create blocks of devices with the correct uid/gidPeter Kjellerstedt1
When creating a block of devices (i.e., when count > 0), the wrong path was used with the call to chown(), effectively trying to change the owner of some (probably) non-existent file. Thus the created device nodes were always owned by root. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30ncurses: Fix problems expanding ncurses-libtinfo when in IMAGE_INSTALLJason Wessel1
The ncurses package was generating the following error as a result of not specifing the PACKAGES_DYNAMIC correctly. This error only appear when using the IMAGE_INSTALL list that has been expanded by the hob or from the pkgdata. ERROR: Nothing RPROVIDES 'ncurses-libtinfo' The dynamic packages are named using "${PN}-lib%s". So we check for ${PN}-lib* Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30libnl: fix two parentheses bugs in lib/cache_mngr.c fileSong.Li2
there are two parentheses bugs in libnl /lib/cache_mngr.c file. The parentheses doesn't make any sense, This will cause the variable err get a bool value, the correct value of variable err should be the return value of the function which can be any integer value. Signed-off-by: Song Li <Song.Li@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30grep: fix for CVE-2012-5667Ming Liu2
Multiple integer overflows in GNU Grep before 2.11 might allow context-dependent attackers to execute arbitrary code via vectors involving a long input line that triggers a heap-based buffer overflow. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-5667 Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30initscripts: let status return 0 when proc is running wellJesse Zhang1
Ensure that the status returns 0 instead of the last shell command result, otherwise the calling script can not properly detect the status of pid. Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30dbus-glib: use BPN instead of PNJesse Zhang1
Fix warnings in multilib build: WARNING: For recipe lib32-dbus-glib, the following files/directories were installed but not shipped in any package: WARNING: /usr/share/dbus-glib WARNING: /usr/share/dbus-glib/tests Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30acpid: modify CFLAGSJoe Slater1
Override the hard-coded CFLAGS used in Makefile to reference our CFLAGS. Without this patch if the DEBUG_OPTIMIZATION is enabled (using -O0) the compile log shows acpid still using -O2 because the Makefile has various hard coded CFLAGS defined. Instead of using the hard coded CFLAGS, we simply define the proper set within the recipe itself. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30libxpm: inherit gettextJesse Zhang1
libxpm requires the xgettext command to build. Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30guile: added runtime dependency on glibc-gconv-iso8859-1Bogdan Marinescu1
guile needs to be able to convert strings from ISO-8859-1 in order to work properly. This patch adds a runtime dependency to the required convert package, but only when glibc is used. The fix for uClibc depends on another bug (#4530). [YOCTO #4019] Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30librsvg: add sstate dependencies so that the SVG loader works at staging timeRoss Burton1
Add more sstate dependencies that were missing from the merge into master. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30pixbufcache: add more documentationRoss Burton1
Add some more documentation to the PIXBUFCACHE_SYSROOT_DEPS variable to clarify the usage. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30utils: add trim_version() functionRoss Burton2
Add a helper function that returns just the first <num_parts> of <version>, split by periods. For example, trim_version("1.2.3", 2) will return "1.2". This should help reduce the spread of numerous copies of this idea across classes and recipes. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30python-scons-native: fix invoking scons failed on Fedora-17Hongxu Jia1
While the destro didn't install scons, build scons by python-scons-native, and invoke it with the error: ... $scons -h Traceback (most recent call last): File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module> import SCons.Script ImportError: No module named SCons.Script ... 1, While building scons as default, scons's lib will be install in the dir of `scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly. 2, While build python-scons-native, `--install-lib' is explicitly set, and scons's lib was not installed in the dir of `scons' or `scons-2.3.0'. 3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/ ${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/ scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}. Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON _SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib. [YOCTO #4562] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30qt4: fix path to demos documentationJonathan Liu1
The qt4-demos-doc package is not created when building qt4-x11-free because ${docdir}/qtopia/qch/qt.qch doesn't exist. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30powerpc64-linux: Update cached autoconf value for apr on powerpc64Zhenhua Luo1
Fix below apr configure issue of powerpc64 targets. | configure:27173: checking whether TCP_NODELAY and TCP_CORK can both be | enabled | configure:27179: error: in `/home/yocto/workspace/sdk-devel/build_p5020ds-64b_release/tmp/work/ppc64e5500-fsl-linux/apr/1.4.6-r2/apr-1.4.6': | configure:27181: error: cannot run test program while cross compiling Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30pkg-config: remove obsolete AM_PROG_CC_STDCMarko Lindqvist2
Add patch obsolete_automake_macros.patch that removes AM_PROG_CC_STDC from included glib tree. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30patch: use PACKAGECONFIG to ensure correct dependency for xattrSaul Wold1
This will enable or disable xattr with the correct dependency on attr as needed. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30systemd: add udev-utils dependency for udev-hwdbLaurentiu Palcu1
udev-hwdb needs udevadm tool to compile the hardware index. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29bind: add ipv6 supportLi Wang1
Make ipv6 configure dependent on DISTRO_FEATURES. Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29util-linux: Add ability to compile with nativesdkJason Wessel2
Some of the tools in the util-linux are used for disk and text file operations in the nativesdk so as to get around different versions that may exist on the host system. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29libpam: Avoid wildcards in the SRC_URIMark Hatle1
Remove the wildcard from the SRC_URI. This causes problems when you .bbappend and add a FILESEXTRAPATHS entry. The unpack task may be unable to find the files to unpack leading to an error. Avoid wildcards at all costs... Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29cmake.bbclass: modify construction of compiler flagsJoe Slater1
Use CFLAGS instead of CPPFLAGS for C_FLAGS variants. When debug optimization is enabled in the local.conf, the debug (-O0) vs production (-O2) does not change in the builds. As the CPPFLAGS do not contain the optimization settings. Also the CXX_FLAGS are based on CXXFLAGS, so it makes sense to similarly set the C_FLAGS based on CFLAGS. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29dpkg-native: Fix native perl pathMing Liu1
The path to the native perl was incorrect leading to rootfs failures. This patch corrects that problem, it's a complementary fix for commit:04432446. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29guile: don't search for libreadline in host libdirJackie Huang1
Fix the QA warning: WARNING: guile: The compile log indicates that host include and/or library paths were used. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29qmake_base.bbclass: Add linux-gnun32-oe-g++ to QMAKESPECXin Ouyang1
For some mips targets, TARGET_OS is set to linux-gnun32, while linux-gnun32-oe-g++ is not listed in the default QMAKESPEC list of qmake in oe-core/wrlinux. This would cause build failures for qt apps, so add a matching rule to fix this. Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29siteinfo.bbclass: Add mips64 common siteinfoMark Hatle1
There is no mips64-common file, replace the definition with mips-common. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29consolekit: remove /var/run from packageJonathan Liu1
The /var/run/ConsoleKit directory doesn't need to be included in the package as it is created by console-kit-daemon if it doesn't exist. The /var/run directory is already created by base-files. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29resolvconf: remove /var/volatile/run/resolvconf/interface from packageJonathan Liu1
- Remove /etc/resolvconf/run/interface from package as it actually uses /etc/resolvconf/run/interface - Create /var/run/resolvconf/interface on startup using populate-volatiles.sh and tmpfiles.d for systemd - Create symbolic link from /etc/resolvconf/run to /var/run/resolvconf Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29cups: remove /var/run from package as cupsd will populate it on startupJonathan Liu1
The /var/run/cups and /var/run/cups/certs directories don't need to be included in the package as they are created by cupsd with the proper permissions if they don't exist. The /var/run directory is already created by base-files. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29bind: remove empty /var/run directoryJonathan Liu1
The /var/run directory is already created by base-files. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29udev: do not create symbolic link from /run to /var/runJonathan Liu2
The /run directory is now a tmpfs with /var/run as a symbolic link pointing to /run. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29udev: do not create /var/volatile/run in init scriptJonathan Liu1
Previously in udev init, /var/volatile/run had to be created after mounting all tmpfs filesystems so that udevd can write to /var/run (a symbolic link to /var/volatile/run). This is because udev is started before populate-volatile.sh. Now that /var/run is a symbolic link to /run (a tmpfs filesystem), /var/volatile/run doesn't need to be created anymore. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29systemd: remove old /var/run workaroundsJonathan Liu2
Do not clear /var/run on startup as it is a tmpfs. Do not create empty /var/run/utmp on startup as it no longer seems needed for systemd-update-utmp-runlevel.service to start properly. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29systemd: do not create symbolic link from /run to /var/runJonathan Liu1
The /run directory already exists as a tmpfs with /var/run as a symbolic link pointing to /run. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29systemd: do not create /var/volatile/run and /var/volatile/lockJonathan Liu2
The directories are not needed anymore. Previously: /var/run -> /var/volatile/run /var/lock -> /var/volatile/lock Now: /var/run -> /run /var/lock -> /run/lock Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29base-files: add /run directory from FHS 3 draft specificationJonathan Liu4
This adds the /run directory from the Filesystem Hierarchy Standard 3.0 Draft [1] and refactors the filesystem as follows: - Remove creation of /var/volatile/run - Remove creation of /var/volatile/lock - Remove symbolic link from /var/run to /var/volatile/run - Remove symbolic link from /var/lock to /var/volatile/lock - Add symbolic link from /var/run to /run - Add symbolic link from /var/lock -> /run/lock - Add /run to /etc/fstab for sysvinit compatibility [1] http://www.linuxbase.org/betaspecs/fhs/fhs.html#runRuntimeVariableData Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29findutils: backport fixes for documentation build errorsJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29cracklib: Allow byte order patch to work on older Linux hostsMark Hatle1
Older hosts don't have the htobe* and be*toh functions defined. Instead we fall back to checking the endian and calling bswap_* directly. This works on both old and new hosts. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29gdb-cross-canadian: use correct exec-prefix path for pythonSamuli Piippo1
Incorrect exec-prefix path was given to gdb which leads to gdb startup failure when SDK is not installed to its original destination. Gdb relocates the exec-prefix path, so it will work for SDKs that are installed to different location. PYTHONHOME env in no longer neeeded for gdb. [YOCTO #3839] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29binutils: add two AArch64 related backports to 2.23.2Marcin Juszkiewicz3
Update required to pass "movi" related build errors when gcc-4.8 is used. libgcrypt, slang, mysql5 were failing like this: | {standard input}: Assembler messages: | {standard input}:316: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-106' | {standard input}:348: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-8' | {standard input}:352: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-27' Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29libdrm: fix packaging after last upgradeMartin Jansa1
* 2.4.44 adds 2 more tests kmstest and vbltest which got packaged to PN, causing PKG rename and breaking upgrade path * check_data_file_clashes: Package libdrm wants to install file /usr/lib/libdrm.so.2 But that file is already provided by package * libdrm2 * check_data_file_clashes: Package libdrm wants to install file /usr/lib/libdrm.so.2.4.0 But that file is already provided by package * libdrm2 put them to PN-tests where they belong Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29freetype: update to upstream version 2.4.12Marko Lindqvist2
LICENSE.TXT md5sum changed as there's mention about part of the code being in public domain added. no-hardcode.patch removed as upstream has no longer the problematic code to patch at all. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29curl: update to upstream version 7.30.0Marko Lindqvist2
0001-Fix-NULL-pointer-reference-when-closing-an-unused-mu.patch now part of upstream. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29gtk+: update to upstream version 2.24.18Marko Lindqvist13
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-23 21:40:05 +0000