summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2013-08-30lib/oeqa/runtime: ping: fix ping false failStefan Stanacar1
We run the ping test as soon as we reach the login prompt. But sometimes (seen in sato systemd) we end up with link down/link up stuff like: qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready The logic behind ping -w 30 -c 1 was to wait at most 30 seconds for at least one reply, but there is a catch: reply doesn't seems to be echo reply but any reply (non-reply means loss not network error) ping's man page: -w deadline Specify a timeout, in seconds, before ping exits regardless of how many packets have been sent or received. In this case ping does not stop after count packet are sent, it waits either for deadline expire or until count probes are answered or for some error notification from network. Just when the link up/link down happens ping returns: From 192.168.7.1 icmp_seq=1 Destination Host Unreachable --- 192.168.7.2 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms and exits sooner than the 30 seconds timeout. This patch should do what was originally intended (wait at most 30 seconds for at least one reply). Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30python: Backport 2 CVE from upstreamSaul Wold3
These are back ports of 2 patches from upstream to address CVE-2011-4944 CVE-2013-4238 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30perl: Backport 2 CVE PatchesSaul Wold3
These patches are backported from upstream since it might be risky to update right now They address the following CVEs CVE-2012-6329 CVE-2013-1667 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30btrfs-tools: Add dependency on lzo acl e2fsprogsRoy.Li1
Add dependency on lzo acl e2fsprogs to fix the below building failure 1. commit b268a417259b9[add lzo compression support to restore] needs lzo cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory 2. btrfs-tools includes <sys/acl.h> which is provided by acl btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory 3. btrfs-tools always needs e2fsprogs btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30systemd: use /bin/mkdir instead of host mkdir pathJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30gcc-4.8: fix ICE of cross-compile for PowerPC e500v2 targetsChunrong Guo2
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7 * fix the segfault issue of dd on e500v2 targets Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1, accordingly %Ld format of sprintf is disabled. Address Bug 4910 - [p1022ds]urandom: segmentation fault Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30libsamplerate0: add PACKAGECONFIG for fftwRoy.Li1
fftw is autodetected from sysroot, add PACKAGECONFIG to make it deterministic Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30mesa: add missing elfutils dependency for r600 PACKAGECONFIGJonathan Liu1
Fixes the following configure error: configure:23490: error: radeonsi and r600g require libelf when using LLVM Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30bluez4: fix network Connect parameter validationPeter A. Bigot2
The incorrect validation prevents connection to the NAP service on another device. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30multilib.bbclass: Expand the WHITELISTs with multilib prefixJackie Huang1
fix the following failures: ERROR: Nothing PROVIDES 'virtual/lib32-i586-pokymllib32-linux-compilerlibs' ERROR: Nothing RPROVIDES 'lib32-update-alternatives-cworth' Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30web-webkit: Drop, we have midori nowRichard Purdie3
This was never a particularly useful browser and is a dead codebase, retire it and suggest midori instead. [YOCTO #2318] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30lib/oeqa/runtime: syslog: fix test for logger in case of systemdStefan Stanacar1
Recently syslog behaviour changed for systemd images (log it's in a buffer not in /var/log/messages), account for the new stuff. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30gtk+3: pull forward the gtk+2 hardcoded libtool patchChristopher Larson2
Without this, it tries to run ./libtool, not the sys-prefixed libtool, which fails, resulting in dynamic modules being disabled, which in turn results in compiling the immodules directly into the gtk+3 library. I tried switching it to using $LIBTOOL rather than hardcoding the path, as LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further, and this gets the job done for now. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30gtk+3: only set GTKIMMODULES_PACKAGES if we have immodulesChristopher Larson1
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30lib/oeqa/utils: qemurunner: fix when runqemu errors outStefan Stanacar1
When qemu doesn't start or runqemu errors out (some wrong option passed or sudo needs a password for setting tap) we want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/ poky commit 51588936d4a8cde3c9bb05800240c0a0f5dedf8d changed the kill method and broke this code, so let's fix it. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30lttng-ust: Update to version 2.2.1Tom Zanussi3
Update lttng-ust to version 2.2.1 to correspond to the LTTng 2.2 "Cuda" - Tracer toolchain stable release. This also removes all the local lttng-ust patches, which are now upstream. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30lttng-tools: Update to version 2.2.3Tom Zanussi1
Update lttng-tools to version 2.2.3 to correspond to the LTTng 2.2 "Cuda" - Tracer toolchain stable release. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30util-linux: package mkfs.cramfs and fsck.cramfsAndrea Adami1
The recipe builds the two utils which are unpackaged. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30image_types.bbclass: use mkfs.cramfs instead of makecramfsAndrea Adami1
The former is provided by util-linux and the latter is now to be removed for meta-filesystems. This allows to generate cramfs images whithout extra layers. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30busybox: configure system user id to range from 100 to 999Chen Qi1
Previously, the range was 0 to 0. This made it impossible to use busybox's adduser utility to add a system user. The following error would appear. adduser: no uids left This patch fixes this problem by giving it a reasonable range. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30packagegroup-self-hosted: Add missing python codeSaul Wold1
These are in the Toolchain list, so they should also be installed on the build appliance [YOCTO #5061] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30build-appliance-image: upgrade to commit ↵Cristian Iorga1
5745e45b18e5099e94b4d5a73bc97dc6d4cdc91f Improvements to poky gets in this way reflected in Build Appliance. Notable improvements/fixes to bitbake. New hardware targets. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30remove the unnecessary protocol parametersJackie Huang98
It's not necessary to specify the protocol parameter when it's the default protocol for the fetcher, e.g. the default protocol for git fetcher it git, "protocol=git" isn't needed. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30builder: register html links and files with MidoriMihai Prica1
HTML files and links will open in a tab in Midori. [YOCTO #3506] Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30packagegroup-self-hosted: integrate midoriMihai Prica1
Integrate the Midori web browser in Build Appliance. This will allow the users to get help and file a bug from Hob in Build Appliance. [YOCTO #3506] Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30lib/oeqa: move skeletoninit.py where it belongsStefan Stanacar1
OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f / poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but in the wrong location. I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was unintentional, it should have been under meta/lib/oeqa/runtime. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-29libnfsidmap: Add and modify idmapd.confZhang Xiao2
add configuration file to make rpc.idmapd to not report below error: rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory rpc.idmapd: Could not find group "nobody" Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com> Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-29busybox: set default log buffer size to 64 at compile timePaul Eggleton1
This provides a more reasonable log buffer size to avoid losing earlier events, and 64K is not a problem for modern systems. When the buffer is used on sysvinit-based systems, which it isn't by default, 64K is already the runtime default size unless /etc/syslog-startup.conf is modified or deleted, so this only really affects systems using systemd. This completely removes the need for the busybox bbappend in meta-oe. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-29buildtools-tarball: Add python-pkgutilRichard Purdie1
This is needed by some recently added automated QA tests so we should add it to the buildtools tarball. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28classes/testimage: add support for finding tests in other layersStefan Stanacar2
A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as normal) and enable them with TEST_SUITES_append = " testname". Test module names shouldn't collide though. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-28classes/testimage: increase default boot timeoutStefan Stanacar1
While I can't reproduce on local builds, sometimes images fail to boot on AB (which runs many builds at once). Assuming there isn't something weird going on, let's just give it more time. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-28lib/oeqa/runtime: remove some unnecessary checks from setUpModuleStefan Stanacar4
These checks are unnecessary. setUpModule is run when a module is loaded and we shouldn't run commands on the target here, (plus if ssh doesn't work we error out in setup multiple times, instead of skipping the real test, which might depend on test_ssh). Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-28linux-yocto/3.4: v3.4.59, mohonpeakBruce Ashfield3
This is a standard refresh of the 3.4 LTSI kernel to include v3.4.59 and to introduce the updated mohonpeak BSP. Build and boot testing on qemu showed no issues. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28linux-yocto/3.10: fix ssh login and restore CC_OPTIMIZE_FOR_SIZEBruce Ashfield3
Updating the BSP SRCREVs with the following changes: 7144bcc Revert "timer_list: Split timer_list_show_tickdevices" 1c0d1d8 Revert "timer_list: Convert timer list to be a proper seq_file" To temporarily fix the ability to log in via ssh on some host/image combinations. Updating the meta SRCREV for: cd502a8 meta/standard: standard configuration fragment must be first Which was incorrectly overriding feature and arch configuration values. [YOCTO #5064] [YOCTO #5062] Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28midori: use BPN instead of PNSaul Wold1
Otherwise multilib builds break as the SRC_URI becomes invalid. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28midori: add version 0.5.5 from meta-gnomeMihai Prica1
Midori is a lightweight web browser that uses the WebKit rendering engine and the GTK interface. This allows a more easy testing of the functionality of webkit-gtk component that is already in oe-core. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28python-docutils: add version 0.11 from meta-oeMihai Prica1
Docutils is a text processing system for processing plaintext documentation into useful formats(HTML, XML, man-pages). This is required by the Midori web-browser. * Update 0.5 from meta-oe to 0.11. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28libnotify: add version 0.6.0 from meta-gnomeMihai Prica1
Libnotify is a library that can be used to send desktop notifications to a daemon. It's required by the Midori web-browser. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28vala.bbclass: add class from meta-oeMihai Prica1
This can be used by packages written in vala. It is required by the Midori web-browser. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28vala: add version 0.16 from meta-oeMihai Prica3
Vala is a C#-like language dedicated to ease GObject programming. It is required by the Midori web-browser. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28dpkg: fix configuration issue for mips64Joe Slater2
CQID: 431771 configure cannot determine the proper cpu, os, or architecture for mips64, and possibly other arch's, because of faulty code added to Arch.pm in the latest release from upstream. We remove that code. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28systemd: Upgrade to 206Khem Raj7
Add new PACKAGE systemd-rpm-macros, this will hold the macros which are interesting when rpm is used as package management backend Forward port uclibc only patches. Add a new patch to stub out use of preadv/pwritev in testcases Delete patches that have been merged upstream in systemd Remove force export of GPERF variable in environment this was causing AC_CHECK_TOOL to not populate GPERF variable as expected systemd needs kmod to be present on rootfs so add it to RDEPENDS some services substitute discovered kmod when the service file is generated during boot, however the discovered kmod is from native sysroot and it gets into the service file with absolute path. So specify the target path of kmod using KMOD variable so the unit files have correct pointer to kmod on target Add a patch to make sure that mknod capability is checked before the service which excercise mknod, this patch is also submitted to upstream systemd Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28kmod: Upgrade to version 14Khem Raj6
The update is a requirement for systemd-206 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28linux-yocto-rt: add qemumips and qemuppc to COMPATIBLE_MACHINESBruce Ashfield1
3.10-rt boots and has good cyclictest results on qemuppc and qemumips, so we can now safely add them into COMPATIBLE_MACHINES. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27gcc-4.8.inc: Allow lto to be configurableRichard Purdie1
For some platforms its useful to be able to configure LTO so provide a variable to allow this to happen. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27perf: Ensure we general PIC code to avoid build failuresRichard Purdie1
Without this we see relocation errors on mips with 3.10. This should be safe to be included in general. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27lttng-modules: Update to 2.2.1 based releaseTom Zanussi1
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27linux-yocto: add bc-native dependency, and move to linux-yocto.incBruce Ashfield2
As reported by Martin Jansa <martin.jansa@gmail.com>, the following error happens when building in a minimal environment: | BC kernel/timeconst.h | /bin/sh: bc: command not found | make[3]: *** [kernel/timeconst.h] Error 127 | make[2]: *** [kernel] Error 2 | make[2]: *** Waiting for unfinished jobs.... kernel commit 70730bca [kernel: Replace timeconst.pl with a bc script] added a kernel dependency on bc. To support the build of linux-yocto recipes in these configurations, we add bc-native to the common dependencies. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27kern-tools: fix patch series to git tree validationBruce Ashfield1
Previous changes to the kern-tools improved functionality to ensure that as a series is considered, it is checked against the tree to confirm that all patches are really applied. There was a bug in the subject based detection, such that the first matching patch was take, and not the last. This change ensures that we start from the end of a series, not the start. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27bc: add bc-nativeBruce Ashfield1
To support the building of recent kernels in minimal environments, we should provide bc-native. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 19:13:41 +0000