summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2014-08-11gstreamer1.0-plugins-good: fix the bug for gstrtpmp4gpayWang Zidan2
set dafault value for MPEG4 without codec data in caps https://bugzilla.gnome.org/show_bug.cgi?id=734263 Signed-off-by: Wang Zidan <b50113@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11bootchart2: create recipe for bootchart2Max Eliaser2
This recipe creates packages for the bootchart2 system-wide profiler daemon and related utilities. It fetches the Git revision immediately past the one corresponding to the 0.14.6 release of bootchart2. (0.14.6 had a systemd- related bug that was corrected right after it was tagged.) The recipe contains three packages: * bootchart2 - The daemon itself. * pybootchartgui - Python program to visualize and display the data collected by bootchart2 or compatible daemons such as the original bootchart. * bootchartd-stop-initscript - A SysV init script to stop data collection when booting completes. Depending on how you wish to use bootchart2, you may not end up having all three of those packages installed on your image. There is also a bootchart2-native variant, which is intended solely to provide a native version of the pybootchartgui utility. The non-cross-compiled version of the bootchart2 daemon has not been tested at all, don't use it. The recipe is extensively documented. Read the comments at the beginning of bootchart2_git.bb or else you'll have no idea how to use it. This recipe is based on a recipe from meta-WebOS. The WebOS people had some extra code (including patches against the bootchart2 code) to support the Upstart init system. However, since upstream Poky does not support Upstart, that stuff is being left behind. The WebOS people can write a bbappend to re- add it. Original recipe written by Wonhong Kwon of LG. Upstreamed as part of the solution to [YOCTO #5893]. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11v86d: fix for systemd to load uvesafb module correctlyChen Qi2
The /etc/init.d/fbsetup script doesn't have any effect in a systemd image. Its purpose is to load the uvesafb kernel module at boot. This functionality could be achieved by adding a configuration file under /etc/modules-load.d/ directory which would be parsed by the systemd-modules-load.service. [YOCTO #4420] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11alsa-state: install init script only when 'sysvinit' is in DISTRO_FEATURESChen Qi1
The /etc/init.d/alsa-state is totally useless for a systemd image. Its functionality has been replaced by alsa-state.service files. So if 'sysvinit' is not in DISTRO_FEATURES, installing this script doesn't make any sense. [YOCTO #4420] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11syslinux: fix reinstall errorRobert Yang1
Fixed: make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stdarg.h', needed by `cpio.o'. Stop. make: *** Waiting for unfinished jobs.... ERROR: oe_runmake failed This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .cpio.o.d isn't regenerated when recompile (the compile happens when do_install), the content of it are: [snip] cpio.o: /path/to/sysroot/4.9.0/include/stdarg.h [snip] And Makefile includes the .cpio.o.d file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stdarg.h doesn't exist. Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11u-boot-mkimage: fix recompile errorRobert Yang1
Fixed: make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `crc32.o'. Stop. make: *** Waiting for unfinished jobs.... ERROR: oe_runmake failed This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't regenerated when recompile, the content of it are: [snip] crc32.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the .depend file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11kernelshark: fix recompile errorRobert Yang1
Fixed: make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `parse-events.o'. Stop. make: *** Waiting for unfinished jobs.... ERROR: oe_runmake failed This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .parse-events.d isn't regenerated when recompile, the content of it are: [snip] parse-events.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the .parse-events.d file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11kexec-tools: fix recompile errorRobert Yang1
Fixed: NOTE: make -j 32 make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `kexec/kexec.o'. Stop. This happens when upgrade gcc from 4.9.0 to 4.9.1, and the kexec/kexec.d isn't regenerated when recompile, the content of it are: [snip] kexec/kexec.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the kexec/kexec.d file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove kexec/kexec.d and other similar files will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11logrotate: fix recompile errorRobert Yang1
Fixed: NOTE: make -j 32 make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `logrotate.o'. Stop. This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't regenerated when recompile, the content of the .depend are: [snip] logrotate.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the .depend file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove .depend will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11libnewt: fix recompile errorRobert Yang1
Fixed: NOTE: make -j 32 make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `test.o'. Stop. This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't regenerated when recompile, the content of the .depend are: [snip] test.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the .depend file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove .depend will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11busybox: Add Upstream-Status to patchSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11sysvinit: allow stack size configuration from rcSScot Salmon1
For certain swap/overcommit settings (e.g. when overcommit is disabled on a real-time system), we need to limit the stack size used by initscripts. When the STACK_SIZE environment variable is set (usually in /etc/default/rcS), ulimit the stack size to the value specified. Make the stack size ulimit a soft limit, which allows the user to increase the stack size where required without having to run the respective application as root. Signed-off-by: Scot Salmon <scot.salmon@ni.com> Signed-off-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Rich Tollerton <rich.tollerton@ni.com> Acked-by: Brad Mouring <brad.mouring@ni.com> Acked-by: Bill Pittman <bill.pittman@ni.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11wpa-supplicant: use PACKAGECONFIG for ssl selectionYasir-Khan2
Select between openssl or gnutls as ssl implementation via PACKAGECONFIG instead of explicitly adding both via DEPENDS. Signed-off-by: Yasir-Khan <yasir_khan@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11lz4: update to 120Armin Kuster1
Update package to version 120 Add Makefile to LIC_FILES_CHKSUM check as it changes with every rev. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11boot-directdisk.bbclass: use local HDDDIRRobert Yang1
Use $HDDDIR rather than ${HDDDIR} in build_boot_dd(), otherwise may errors: - Set these in local.conf: IMAGE_FSTYPES += "live" IMAGE_FSTYPES += "vmdk" AUTO_SYSLINUXMENU = "1" NOHDD = "1" $ bitbake core-image-sato DEBUG: Executing shell function build_boot_dd install: cannot create regular file `/path/to/core-image-sato-1.0/hddimg//vesamenu.c32': No such file or directory WARNING: exit code 1 from a shell command. This because it uses the ${HDDDIR} which is set in bootimg.bbclass, use local HDDDIR which is set in build_boot_dd() will fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11remake: fix build errorMaxin B. John2
Fix build error: ... unknown command `colophon' unknown command `cygnus' Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11tzdata: update to 2014fArmin Kuster3
md5sum on asia file changed do to severel tzone updates Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-11tzcode: update to 2014fArmin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-08-06ghostscript: Remove bogus gsfonts reference from DESCRIPTIONRichard Purdie1
[YOCTO #5586] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06documentation.conf: Small tweak to INITRD variableNitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06code cleanup for INITRD variable handingNitin A Kamble2
* Remove an unnecessary check * Instead of ignoring, report the errors Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06base-files: set dynamic COLUMNS via resize commandTing Liu2
By default, COLUMNS is set to 80. If possible, run 'resize' to determine what the current dimensions are. This avoids the final part of long lines overlap the start of the same line. Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06busybox: Make busybox connman awareSaul Wold3
This change makes busybox aware of both connman and the standard dhcp client, while there is a caveat about using busybox's ifup/ifdown, this change will make the 3 possibly dhcp clients behave better when busybox is used. Enable the CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP feature to busybox will search for various external clients and then add connman as an external client. [YOCTO #6521] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06oelint.bbclass: Check for ${PN} or ${P} usageChong Lu1
Check for ${PN} or ${P} usage in SRC_URI or S. We should use ${BPN} or ${BP} instead to avoid breaking multilib. [YOCTO #5427] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06oelint.bbclass: add patch checkingChong Lu1
Check that all patches have Signed-off-by and Upstream-Status. [YOCTO #5427] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06oelint.bbclass: make oelint bbclass workChong Lu1
Remove LICENSE, MAINTAINER, PRIORITY and valid SECTION checking. Convert tab indentation into four-space. [YOCTO #5427] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06curl: remove unused patchMaxin B. John1
Remove unused "remove_inappropriate_file_from_rel.patch" Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06perf: fix indentationMartin Jansa1
* multiline variables should use spaces not tabs for indentation * do_configure is also using wrong indentation, but I'm not fixing this one (still hoping that we'll eventually fix styleguide to use 4 spaces everywhere) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06perf: explicitly disable libunwindMartin Jansa1
* it's not included in DEPENDS and it's detected from sysroot Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06Add doc entry for "ptest-pkgs" in IMAGE_FEATURES listRobert P. J. Day1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06gstreamer1.0-omx: Remove unnecessary dependency on plugins-bad.Drew Moseley1
This also corrects an erroneous overwriting of the dependencies from the inc file. Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06kexec-tools: Create separate package for vmcore-dmesgRicardo Neri1
The kexec-tools recipe already specifies separate packages for kexec and kdump. Thus, it follows that a separate package can also be used to install vmcore-dmesg granularly. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06slang 2.2.4: fix the iconv existence checkingZheng Junling2
When checking whether there is iconv, the configure file always check the host env. Now we make it working properly by adding correct prefix for cross- compiling environment. Signed-off-by: Zheng Junling <zhengjunling@huawei.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06cups: regen configure so cups-no-gcrypt.patch has an effectPeter A. Bigot1
The existing patch backports a change to the m4 source file, but without a forced autoconf before configure it has no effect. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06cairo: explicitly disable LTO support by backporting patch which removes itMartin Jansa2
* cairo-native was failing to build in gentoo with gcc-4.9 and LTO enabled, more details in upstream bug https://bugs.freedesktop.org/show_bug.cgi?id=77060 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06tcp-wrappers: install /etc/hosts.allow and /etc/hosts.denyYao Xinpan1
Signed-off-by: Yao Xinpan <yaoxp@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06tcp-wrappers: fix do_install when $prefix == $base_prefixKoen Kooi1
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06formfactor: Grammar fix in recipe comment.Robert P. J. Day1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06nss*: Replace hardcoded "/etc" with "${sysconfdir}"Robert P. J. Day2
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06alsa-lib: pcm_local.h: include <time.h> to enable CLOCK_MONOTONICWang Zidan2
CLOCK_MONITONIC is defined in <bits/time.h>, add <time.h> before <sys/time.h>. Signed-off-by: Wang Zidan <b50113@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06alsa-lib: fix hw_ptr exceed the boundaryWang Zidan2
For long time test case, the hw_ptr will exceed the boundary, then cause the avail size wrong. Signed-off-by: Wang Zidan <b50113@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06alsa-lib: use get32_labels for multi-sourceWang Zidan2
The PCM route plugin can assign the destination value from average of multiple sources with attenuation. This requires the read of each channel value, sums and writes the resultant value in the requested format. get_labels gives the value as is only with endianness and signedness conversions, but put32_labels assumes that the value is normalized to 32bit int and it shifts down to the dest format. In addition, the current code lacks get_labels entries for the 24bit formats. For fixing these bugs, this patch replaces the read with get32_labels and use always 64bit int for sum. Signed-off-by: Wang Zidan <b50113@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06psmisc: Typo in fuser makes -M on all the timePatrice B2
psmisc: Typo in fuser makes -M on all the time It adds a patch to fix a major issue on fuser that behaves as if -M option is always used. More info on psmisc website here : http://sourceforge.net/p/psmisc/code/ci/3638cc55b4d08851faba46635d737b24d016665b/ Signed-off-by: Patrice Bouchand <pbfwdlist@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-06tcmode-default.inc: allow override of binutils-crosssdkCristian Iorga1
Sometimes, binutils-crosssdk needs to be override, like is the case for producing Darwin cross SDK. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-04local.conf.sample.extended: fix example for EXTRA_USERS_PARAMSChen Qi1
The `groupdel' command doesn't support '-g' option, so remove it. [YOCTO #6575] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-04autotools: Exclude SDK_OS from autotools task signaturesRichard Purdie1
The change to handle SDKs of different types resulted in the signatures becoming SDK specific which wasn't intended. Exclude the variable from the hash values to avoid this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-04package: Fix darwin shlibs codeRichard Purdie1
We need to scan binaries as well as libraries for dependencies. Also ensure if its not an object file (as found by otool), we handle this case. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-03package: Convert dylib handling from .la to otoolRichard Purdie1
Currently, the darwin shlibs detection is done by parsing the .la file dependency fields. This is very old code and is incomplete in some cases so convert to using otool -l and otool -L to correctly load the rpath and dependency information. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-03package: Fix pkgdest for darwin shlibs codeRichard Purdie1
When the code was rewritten we forgot to strip the pkg that is present in the pkgdest path. This was fixed in the linux version of the code but not the darwin one, this matches the fix. Without this, the provider paths are broken. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-03autotools: Fix warning for odctools-crosssdkRichard Purdie1
odcctools-crosssdk doesn't use the suffixed naming the rest of crosssdk does and this results in a annoying build warning. Avoid this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 04:40:44 +0000