summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2014-01-21xcb-proto: upgrade to 1.10Ross Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21glproto: upgrade to 1.4.17Ross Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21sstate.bbclass: remove previous version's stampRobert Yang1
There is a potential problem if we don't remove the previous version's stamp, for example: The depend chain is: libtool-native -> autoconf-native -> m4-native We have two m4-native: 1.4.9 and 1.4.7 1) Clean all of them to make a fresh build so that we can reproduce the problem $ bitbake m4-native autoconf-native libtool-native -ccleansstate 2) Build libtool-native so that the m4-native_1.4.17 will be built $ bitbake libtool-native 3) Set PREFERRED_VERSION_m4-native = "1.4.9" and build again $ bitbake libtool-native 4) Set PREFERRED_VERSION_m4-native = "1.4.17" and build again $ bitbake libtool-native -ccleansstate && bitbake libtool-native Then the build will fail: [snip] | m4: unrecognized option '--gnu' | Try `m4 --help' for more information. | autom4te: m4 failed with exit status: 1 [snip] The is because when we change m4-native to 1.4.17 and build libtool-native again: 5) libtool-native depends on autoconf-native, and autoconf-native's version isn't change, so it can remove the current stamp and mirror the sstate (the one depends on m4-native_1.4.9) from the SSTATE_DIR correctly. 6) The mirrored autoconf-native depends on m4-native_1.4.17's do_populate_sysroot, and the stamp is already there (which is made by step 2), so it would do nothing, but this is incorrect, since the one that really in the sysroot is m4-native_1.4.9, then the error happens. Remove previous version's stamp in sstate_clean() will fix the problem. [YOCTO #5422] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21e2fsprogs/populate-extfs.sh: fix a problem on dashRobert Yang1
The dash can't handle the or [[ in parameter expansion, for example: A=/usr/bin/[[ B=[[ C="${A%$B}" The C should be "/usr/bin" in common, but it will be /usr/bin/[[ on dash, use dirname to fix it. NOTE: There are 3 lines about parameter expansion, only fix the DIR="${DIR%$TGT}" since the other 2 works will and are very useful in this case. [YOCTO #5712] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21linux-firmware: package Marvell SD8797 firmwareAndreas Oberritter1
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21guile: don't use the identifier 'noreturn'Robert Yang2
Fix the build error of autogen-native which depends on guile-native: ysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ')' before '__attribute__' sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ',' or ';' before ')' token sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:42:27: error: expected ')' before '__attribute__' [YOCTO #5743] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19package.bbclass: show warning when package is providing already provided shlibMartin Jansa1
* move read_shlib_providers before registering package as provider and show warning when different package tries to provide something already provided. [YOCTO #4628] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19package.bbclass: move reading shlibs providers to separate functionMartin Jansa1
* prepare for reading shlibs providers only from dependency tree of current recipe [YOCTO #4628] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19icecc: use exact match in blacklists, re-start with empty ↵Martin Jansa1
system_package_blacklist * unify debug messages a bit * old implementation allowed partial match in blacklist, it's safer to explicitly list exact matches * I was able to build all entries from system_package_blacklist with icecc enabled, lets assume that they were already resolved by newer versions (we've fixed a lot of parallel issues in recipes which were detected even without icecc and this list is very old). Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19icecc: Fix allarch and native recipes having different signaturesMartin Jansa1
* for different MACHINES * is there more elegant way to have "overridable" function so that signature handler properly uses only the branch without STAGING_BINDIR_TOOLCHAIN? Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19icecc: use bb.utils.which also for 'as'Martin Jansa1
* it was introduced in commit 3a842ec52e7d010767b13bdcb5629ac07b3ee9e7 Author: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Date: Fri Sep 16 10:55:16 2011 +0400 Subject: icecc.bbclass: replace with updated version without any explanation in which case ${ICECC_CC} -print-prog-name=as is returning as in current working directory, but will keep old behavior just in case Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19icecc: Don't replace non-empty PARALLEL_MAKE with empty ICECC_PARALLEL_MAKEMartin Jansa1
* it's needed for use-case like this: # Inherit icecc here, so that all builders have the same sstate signatures INHERIT_DISTRO += "icecc" # and then disable its function by default (so that people still need to explicity # enable it in local.conf if they have configured icecc and want to use it. # You need to set _empty_ value in local.conf to enable icecc function: # ICECC_DISABLED = "" ICECC_DISABLED ??= "1" * so default ICECC_PARALLEL_MAKE is still empty, but we want build to respect our PARALLEL_MAKE, unfortunately we cannot do something like ICECC_PARALLEL_MAKE ??= "${PARALLEL_MAKE}", because that would cause PARALLEL_MAKE to reference itself. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19allarch: Set empty TARGET_PREFIX and TARGET_FPUMartin Jansa1
* set empty TARGET_PREFIX This has a bit weird reason caused by unsupported setup where external-toolchain is used in some DISTRO only for some MACHINEs and internal is used for other MACHINEs. Because external-toolchain usually comes with different TARGET_PREFIX it was causing allarch recipes to have different signatures even when they don't use toolchain at all. Empty TARGET_PREFIX also helps to find allarch recipes which still have default dependency on e.g. virtual/${TARGET_PREFIX}gcc. * add TARGET_FPU just for completeness (it was used in icecc.bbclass but now it's vardepexcluded there as well) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-19sstatesig: include native/cross/nativesdk deps in target signaturesMartin Jansa1
* I don't have any real evidence or good statistics for this, but when comparing signature dumps from my big bitbake world builds I usually see a lot of rebuilds caused by changes in .bbclasses and only very rare would be the case where oe-core upgrade brings changes in -native recipes and no change in .bbclasses used from target recipes * changing the default to include them shouldn't cause significant increase in rebuilds and sstate reuse a bit safer * people working on toolchain (e.g. using gcc from AUTOREV) can easily extend sstate_rundepfilter to ignore them again (it's easier than removing existing filter), example how add own signature handler in your layer is here: https://github.com/openwebos/meta-webos/commit/9ac3a7c803e7793b3274e4998f167b6278db8042 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg-utils: Remove strange PACKAGES native overrideRichard Purdie1
This code makes no sense, native.bbclass clears PACKAGES anyway. Drop it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg-utils: Add basic PACKAGECONFIG for python dependenciesRichard Purdie1
In small configurations its useful not to have python dependencies. This patch adds code to disable those using PACKAGECONFIG. This allows us to fix poky-tiny after the recent move of update-alternatives to opkg-utils. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17glib-2.0: add explicit build dependency on DBus when ptest is enabledRoss Burton1
If the tests are enabled then configure will check for the presence DBus. It's generally present through the runtime dependencies so this often succeeds but as it isn't a build dependency it's possible for DBus to be present at configure time but removed at compile time, resulting in build failures. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17oe-selftest: Patch sstate tests to work with new sstate-cache naming and contentCorneliu Stoicescu1
Made modifications to account for: - .siginfo files present in sstate-cache from non sstate-enabled tasks - new naming format for sstate files Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17tcl: fix the TCL_INCLUDE_SPECRobert Yang1
We have moved the header files to ${includedir}/tcl${VERSION}, but we didn't fix the TCL_INCLUDE_SPEC which is still ${includedir}, it should also be ${includedir}/tcl${VERSION} Note: this commit modifiey alter-includedir.patch, so it doesn't look very clear, I only fixed one line in both configure and configure.in: -eval "TCL_INCLUDE_SPEC=\"-I${includedir}\"" +eval "TCL_INCLUDE_SPEC=\"-I${includedir}/tcl${VERSION}\"" The other changes are because I use git to create the patch while the previous one uses svn. [YOCTO #5732] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17opkg/opkg-utils/chkconfig: Clean up u-a-cworth referencesRichard Purdie3
Catch some u-a-cworth references that slipped through the move of u-a to opkg-utils and its rename to -opkg. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17update-alternatives: We now use u-a in nativesdk so make sure the dependency ↵Richard Purdie1
is present When update-alternatives was part of opkg which got built in most nativesdk scenarios, this missing dependency wasn't an issue. We now need nativesdk-opkg-utils so we need to ensure the dependency is present in nativesdk cases. This avoids build failures with the recent u-a move to opkg-utils. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-17linux-yocto-dev: bump version to 3.13+Bruce Ashfield1
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16lib/oeqa: allow a layer to provide it's own TEST_TARGET classStefan Stanacar2
Allows a layer to define new classes in <layer>/lib/oeqa/utils/controllers.py and completely control or extend deployment of a target. (core currently has QemuTarget and SimpleRemoteTarget). The value of TEST_TARGET must be the name of the new class. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16x11vnc: fix CAPS_LOCK issuesLaurentiu Palcu1
Currently, pressing CAPS_LOCK on the viewer changes the lock state on the server and the key will not change the case. To fix this, use -skip_lockkeys option to ignore all Caps_Lock, Shift_Lock, Num_Lock, Scroll_Lock keysyms received from viewers, in order to leave the lock state on the server side unchanged. However, the keys will appear correctly on the remote side. [YOCTO #4149] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16weston: depend on drm for 'launch' packageconfig enabledAndreas Müller1
configure fails with: | configure:15654: checking for WESTON_LAUNCH | configure:15661: $PKG_CONFIG --exists --print-errors "libdrm" | Package libdrm was not found in the pkg-config search path. | Perhaps you should add the directory containing `libdrm.pc' | to the PKG_CONFIG_PATH environment variable | No package 'libdrm' found | configure:15664: $? = 1 | configure:15678: $PKG_CONFIG --exists --print-errors "libdrm" | Package libdrm was not found in the pkg-config search path. | Perhaps you should add the directory containing `libdrm.pc' | to the PKG_CONFIG_PATH environment variable | No package 'libdrm' found | configure:15681: $? = 1 | configure:15695: result: no | No package 'libdrm' found | configure:15711: error: Package requirements (libdrm) were not met: | | No package 'libdrm' found and configure.ac says: | if test x$enable_weston_launch == xyes; then | PKG_CHECK_MODULES(WESTON_LAUNCH, [libdrm]) Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16opkg: No longer PROVIDES update-alternativesPaul Barker1
The new provider is the opkg-utils recipe. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16default-providers: Change update-alternatives provider to opkg-utilsPaul Barker1
This allows dependencies to be added to the opkg recipe without causing circular dependency loops. As opkg-utils has minimal dependencies it is the best recipe to provide update-alternatives. This partially solves Yocto Project issue 4836. More work is still needed for a complete solution. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16opkg-utils: Upgrade to latest git HEADPaul Barker1
The latest version of opkg-utils PROVIDES virtual/update-alternatives via a script copied from opkg, packaged as update-alternatives-opkg. The nativesdk class is added to the recipe to ensure that nativesdk-update-alternatives-opkg is built. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16wpa-supplicant-2.0: don't exit in pkg_postinstAlexandre Belloni1
Exiting explicitly in pkg_postinst makes it impossible to use the update-rc.d class in a .bbappend because the link creation is appended to the pkg_postinst script. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16glib-2.0: fix mapped file ptestRoss Burton2
The mappedfile ptest was attempting to write into directories that may not exist on a non-Sato image. Instead, write into TMPDIR. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16glib-2.0: fix the dbus-appinfo test when running outside of XRoss Burton2
This test was attempting to connect to a session bus and hanging if it couldn't. Take a patch from upstream to correctly use a private bus. [ YOCTO #5696 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16oe-selftest: separated the SStateBase and SStateTests in different modulesCorneliu Stoicescu2
- SStateBase now has its own module to be imported by itself by other modules like sstatetests.py Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16oe-selftest: renamed sstate.py module to sstatetests.pyCorneliu Stoicescu1
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16oe-selftest: New object SStateBase cut off from SStateTests.Corneliu Stoicescu1
- SStateBase object contains basic methods used to run sstate related tests - SStateTests now contains only sstate-related tests Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16util-linux: add reset.1 manpage in update-alternativesMatthieu Crapet1
Adding "doc-pkgs" to IMAGE_FEATURES (in an image recipe) reports a conflict with reset.1 file, present both in util-linux and ncurses-doc packages. <log> | Collected errors: | * check_data_file_clashes: Package util-linux-doc wants to install file /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/rootfs/usr/share/man/man1/reset.1 | But that file is already provided by package * ncurses-doc | * opkg_install_cmd: Cannot install package util-linux-doc. | WARNING: /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/run.do_rootfs.13877:1 exit 255 from | opkg-cl -f $INSTALL_CONF_IPK -o $INSTALL_ROOTFS_IPK --force_postinstall --prefer-arch-to-version install `cat $1` | ERROR: Function failed: do_rootfs (log file is located at /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/log.do_rootfs.13877) </log> Same issue already occured few months ago: Re: [OE-core] Clashing man pages https://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg38590.html Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16initrdscripts: add $CMDLINE to init-live switch_rootKrzysztof Sywula1
init-live.sh: $CMDLINE variable should be provided to switch_root to let user specify runlevel on grub command line. Feeding with -c /dev/console as well as busybox switch_root enables that option. Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16package_rpm: Fix a race with package_deb/package_ipkRichard Purdie1
We have the odd situation where the CONTROL/DEBIAN directory can be removed in the middle of the walk, the isdir() test would then fail and the walk code would assume its a file hence we check for the names in files too. This resolves the autobuilder failure: error: File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN RPM build errors: File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16alsa-lib: remove hard-coded /usr/include in dev packageAndrew McDermott1
Specify the location of the alsa headers using ${includedir}. Without this no headers get added to the image when the alsa-lib-dev package is included. Signed-off-by: Andrew McDermott <andrew.mcdermott@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16linux-firmware: add firmware for additional iwlwifi devicesSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16nativesdk-packagegroup-sdk-host: reverse inherit orderLaurentiu Palcu1
Currently, tow successive toolchain builds for different hosts, will issue a warning: WARNING: The recipe nativesdk-packagegroup-sdk-host is trying to install files into a shared area when those files already exist. Those files and their manifest location are: /ssd/work/yp1/build/tmp/deploy/ipk/all/nativesdk-packagegroup-sdk-host_1.0-r11_all.ipk Matched in manifest-x86_64-nativesdk-packagegroup-sdk-host.package_write_ipk Please verify which package should provide the above files. That's because packagegroup is manually inherited after nativesdk which is usually a BBCLASSEXTEND operation, done last. [YOCTO #5396] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-16allarch.bbclass: set SDK_ARCH and SDK_CC_ARCH to "none"Laurentiu Palcu1
allarch packages shouldn't use these variables. [YOCTO #5396] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15glib: add missing dependencies for ptestRoss Burton1
Some of the GLib tests that we run under ptest are missing runtime dependencies. iochannel-test needs the EUC-JP encoding. convert needs the ISO-8859-1 and ISO-8859-15 encodings. contenttype needs shared-mime-info. Add these to the RDEPENDS so that these tests pass. [ YOCTO #5696 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15weston: cleanup mesa dependsAndreas Müller1
* do not depend by default * depend on virtual/mesa instead of mesa Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15linux-yocto/3.10: mohonpeak bsp config and scc filesBruce Ashfield3
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15linux-yocto/3.10: update to 3.10.25Bruce Ashfield3
Updating the 3.10 tree to the 3.10.25 korg -stable release. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15linux-yocto/3.10: update meta data for media fragmentsBruce Ashfield3
Updating the meta SRCREV to import the following changes: d9cd83c0292b remove old MEDIA config fragments 06b76256d7e2 common-pc-standard.scc: Enable USB webcam support acb8b43837d8 common-pc-64.scc: update as per changes in the media config fragments 5513fd2ad72a minnow-standard.scc: Enable media features 172ba799bedc media-all.scc: A feature including all the media features 1a7e1d3a292e media-platform: A feature for platform media devices 03c48dacbb9a media-dvb-frontends : A feature for Digital Video Broadcast Devices 59b92b9d6c72 media-usb-tv: A feature for USB TV media adapters 5ec0709b1fed media-tuners: A feature for media tuner devices 356dc83e39f3 media-rc: A feature for remote control media devices 89d96cf9d574 media-radio: A feature for AM/FM radio devices 3dd2ebeaf49b media-pci-capture: A feature for PCI media capture devices 9ee0e95bfc52 media-i2c: A feature for I2C media devices 28976f4a3e27 media-usb-webcams: A feature for USB media devices f8206f4e00b1 media: A feature for media infrastructure 08bfb248a17f standard.scc: Add firmware loading feature e567a3d53593 firmware: A feature for firmware loading support Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15ltp: fix makefile raceRoss Burton2
There is a Makefile dependency race causing occasional build failures: *** No rule to make target `.../work/core2-poky-linux/ltp/20130904-r0/git/testcases/kernel/include/linux_syscall_numbers.h.23161.sh', needed by `linux_syscall_numbers.h'. Stop. This is due to a bad dependency wildcard that is matching more than the one file it should match, so replace it with a concrete filename. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15dbus-ptest: fix incorrect option nameRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15systemd-compat-units: remove dnsmasq from sysv disabled listAnders Darander1
The dnsmasq recipe in meta-networking ships a dnsmasq.service file, that will correctly override the SysV init script. Thus, as pointed out by Ross Burton, we should remove dnsmasq from the list. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-15shutdown-desktop: use poweroff for the Exec field in the shutdown.desktopChen Qi1
Use 'poweroff' instead of 'halt' for the Exec field in the shutdown.desktop. The purpose of this patch is to make the 'shutdown' icon on on our sato images work as expected for both sysvinit and systemd images. Previously, the Exec field was 'halt'. The `halt' command could poweroff the system in sysvinit images but it only could halt the system in systemd images. The difference is due to the different implementations of the `halt' command. In sysvinit, the `halt' command will effective execute `/sbin/init 0'. This is for the compatibility with sysvinit 2.4, as stated in the comments of the source code. In systemd, the `halt' command will effectively execute the reboot(RB_HALT_SYSTEM). As the 'shutdown' icon is expected to actually shutdown the system, we should use poweroff instead of halt for its Exec field. [YOCTO #4347] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 13:25:28 +0000