summaryrefslogtreecommitdiff
path: root/meta
AgeCommit message (Collapse)AuthorFiles
2013-10-04opkg: ignore result of opkg configureMuhammad Shakeel1
Some packages may return error while running opkg-cl configure, during first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run. Without 'ExecStartPost' opkg-configure service will continue to run on successive boot attempts. 'ExecStartPost' should disable this service after first boot irrespective of 'ExecStart' status. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04cross-canadian: Fix TUNE_PKGARCH referencesRichard Purdie4
The cross-canadian compilers are now build once per architecture but were being installed into tune specific locations which is incorrect. This adjusts things so they are make TARGET_ARCH specific. We gain the tune specific parts from the target sysroot which remains tune specific, the compiler and tools are independent ot that. binutils/gcc require sysroot options but since we reset at runtime, these shouldn't have dependencies in the sstate checksums. They are therefore also excluded. With these patches, switching machines does not result in a rebuild of *-cross-canadian and the compiler is correctly located and referenced in the target images. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04pixman: Fix nativesdk rebuilds for armv7aRichard Purdie1
MACHINE=X bitbake nativesdk-pixman; MACHINE=Y bitbake nativesdk-pixman where X is an armv7a machine and Y is not results in pixman rebuilding due to the neon option. This is incorrect. The ultimate fix will be not to apply target system overrides in the nativesdk case. Until we do that we can at least work around the issue as done by this patch. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04gcc-common: Improve fpu code checksum dependenciesRichard Purdie1
We only care about the end result in this case, not the specific inputs that went into determining the gcc option. This change updates the code to reflect that. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04cross/crosssdl/native/nativesdk: Fix do_packagedata stampsRichard Purdie4
If you build nativesdk for machine A, then change to B you will see sstate manifest warnings for the packagedata files. The stamps are machine specific and should not be, ditto for native. This patch copies the populate-sysroot extra stamp entries to avoid these warnings. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04boot-directdisk: avoid loop in MBR disk signature generationJonathan Liu1
Instead of looping until the generated signature is non-zero, just return 'ffffffff' if it's zero. This avoids an infinite loop if the generated signature is always zero. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-01linux-dummy.bb: Resolve missing task issuesNathan Rossi1
Commit 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a added additional initramfs functionality and created an additional task on kernel.bbclass Adding this task was missed on the linux-dummy recipe, which causes task dependency issues due to image.bbclass depending on "virtual/kernel:do_bundle_initramfs". This change adds a dummy task which resolves the dependency issue. Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-01makedevs: Do not return error if the fifo exisitsSaul Wold1
This ensures that makedevs will not cause image creation failures when it encounters a pipe (fifo) that exists from a previous image. This handles mode changes and it will correctly fail for dangling symlinks. [YOCTO #5288] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-01dpkg: Add xz to RDEPENDSSaul Wold1
dpkg uses xz as a compressor and the binary image is needed on the system for dpkg to work correctly. [YOCTO #1881] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30pseudo: Fix race problemsRichard Purdie2
There is a potential issue with the fastop code in pseudo since a process may exit and allow some other function to run before the server has processed the commands run by the process. Issues have been see with unpredictable file permissions. To avoid this, we ping the server before exitting which guarantees it has processed the current command queue. The patch was written by peter.seebach@windriver.com [YOCTO #5132] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30qemu: Add fix for floating point issues on x86-64Richard Purdie2
There was a bug in handling of the mxcsr register since cpu flags were not getting updated after fxrstor operations. This small tweak fixes that. [YOCTO #5248] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30slang: fix sprintf bug concerning 8-bit charactersMarius Avram2
Buffer used for copying a "%c" character was getting out of scope when it was required by the sprintf operation. [YOCTO #5272] Signed-off-by: Marius Avram <marius.avram@intel.com> Signed-off-by: Irina Patru <irina.patru@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30nss: Fix return codes in postinstallDavid Nyström1
exit 0 was done if $D != NULL, if one or more shlibsign executions fails. Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30boot-directdisk: ensure generated MBR disk signature is non-zeroJonathan Liu1
A zero MBR disk signature is generally seen as no signature and another partitioning program might install a new signature. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30kernel.bbclass: Allow INITRAMFS_TASK to trigger copy initramfs codeJason Wessel1
Activating the INITRAMFS_TASK can cause circular dependencies, but that is up to the end user to resolve in recipes. The INITRAMFS_TASK should also trigger immediate linking of the cpio task in the first compile pass. This was a subtle regression introduced by: 609d5a9ab (kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency and bundling). This patch restores the previous behavior and only affects the INITRAMFS_TASK which is not set by any of the default build profiles in oe-core. Reviewed-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30opkg: Use systemd service for first boot configurationMuhammad Shakeel3
Currently opkg uses a script to configure packages during first time boot. This script is present in rcS.d and when 'sysvinit' is disabled this script doesn't execute. For systemd only distros this newly added service will run the opkg configure during first boot only. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30sato-icon-theme: add more compatibility symlinksRoss Burton1
libfm uses "preferences-desktop", so link it to the close-enough "preferences-sytem". x11vnc uses "computer", link it to "terminal". pcmanfm uses "system-file-manager", link it to "file-manager". [ YOCTO #4062 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30pcmanfm: hide the desktop preferencesRoss Burton2
Sato doesn't use the pcmanfm desktop, so hide the desktop preferences launcher. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30psplash: copy image files from workdir instead of next to recipePaul Eggleton1
During parsing this recipe builds up a list of splash image files, however it was recording full paths to local files (i.e. the files next to the recipe) and then in do_compile it was pointing to those instead of the fetched files in WORKDIR. Fix it to use the fetched files which has the added benefit of the do_compile signature not changing if the recipe is moved around. Fixes [YOCTO #5250]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30libtool: Don't patch generated filesRichard Purdie1
We wipe out and regenerate all configure files so there is no point in patching them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30native: Use a native site file and ensure the correct sed is usedRichard Purdie2
native recipes were not using the site files. There are some things we need to correct such as not using the path to sed-native. This allows us to deploy settings globally for all recipes rather than hacking around then in individual recipes as libtool-native used to for sed. This fixes a regression introduced by http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=32edeb391f2107bb66b361cdcd4b8d4447731c33 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30nativesdk-packagegroup-sdk-host: Add nativesdk-makedevsDavid Nyström1
Add makedevs to SDK, to allow simple /dev/ population. Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30systemd-compat-units: do not create runlevel commandRoy.Li1
It seems strange that runlevel always returns 1, The comment says it is related to sysvinit, but if we enable systemd, sysvinit will not be installed. and we have created a link for runlevel to systemctl if systemd is installed. Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30makedevs: rectify the exit codes and handle the invalid parameterRoy Li1
It is correct behaviours to output help and version information, and should return 0; When input parameter is invalid, print help information and exit. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26makedevs: Add device_table-minimal.txt to the nativesdk sysrootDavid Nyström1
Add an example device_table in the SDK under /usr/share/ Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26dropbear: pass SFTPSERVER_PATH explicitlyRoy Li1
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package, and is installed into ${libdir}/openssh, so we pass it explicitly. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26packagegroup-self-hosted: add xz to enable bootstrapJackie Huang1
xz is required on the target filesystem since it's needed to unpack some of the bootstrap packages. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26eglinfo: drop machine-specific configuration from oe-coreRoss Burton2
eglinfo.inc has some board-specific EGLINFO_DEVICE settings but is missing the dependencies. Maintaining them for all supported devices in oe-core isn't scalable and this is trivially supported though a bbappend in each BSP layer. This was also causing problems compiling eglinfo on meta-yocto-bsp's beagleboard machine as the EGLINFO_DEVICE setting for beagleboard was telling it to use the closed GPU drivers, which are not supported in meta-yocto-bsp. [ YOCTO #5224 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26matchbox-panel: silence some pointless warningsRoss Burton2
The battery applet emits a warning if the hardware doesn't have a battery (it shouldn't) and the parser emits a warning if two separators are used in a row (which happens if the hardware has a keyboard). Silence these with a patch from upstream. [ YOCTO #4061 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26boot-directdisk.bbclass: Fix media generation problems with vmdkJason Wessel4
The various populate methods need to accept a path as an argument vs using hard expanded variables. In the case of the boot-directdisk class it uses a different path for HDDDIR but it gets eclipsed by the the class definition at the point in time ${HDDDIR} gets expanded. The logical fix is to pass the arguments to the functions as opposed to using globally expanded variables from the class definitions. This patch changes 3 things: 1) syslinux_hddimg_populate takes an argument for the destination 2) syslinux_iso_populate takes an argument for the destination 3) populate is changed to boot_direct_populate because there was a conflict with it overriding the populate in bootimg.bbclass [YOCTO #3994] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26syslinux.bbclass, syslinux: Update to syslinux 6.01Jason Wessel2
A newer version of syslinux is required for an EFI enabled isohybrid. This is used for the the capability to generate 3 types of ISO images, all of which can be booted off a USB device or HDD if copied with dd. 1) PC BIOS only ISO 2) EFI only ISO 3) EFI + PC BIOS ISO The syslinux.bbclass required a minor tweak because a few .c32 libraries require dynamic loading from the created media as of syslinux 5 and up. This was a good time to also fix the duplication of the AUTO_SYSLINUXMENU block. [YOCTO #4100] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26bootimage.bbclass, zisofs-tools-native: add ability to compress ISO imagesJason Wessel2
The mkzftree is needed to allow ISO images to be compressed with minimal runtime overhead. Below is an example of the savings on a core-image-minimal. Before ls -l: 24117248 core-image-minimal-qemux86-64.iso Using the mkzftree ls -l: 16777216 core-image-minimal-qemux86-64.iso Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26syslinux.bbclass: Fix hard coding of console=tty*Jason Wessel1
The SYSLINUX_SERIAL variable was hard coded and occasionally needs to be different for the kernel argument vs the syslinux argument. In the auto-generated boot mode console=tty0 was hard coded, and this is not needed at all, and causes problems in some cases if a end user wanted to change the console=... via the kernel boot argument APPEND mechanism. The default can be forced with SYSLINUX_DEFAULT_CONSOLE for systems that need a special specification to enable the frame buffer instead of a serial port. [YOCTO #3944] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26grub-efi.bbclass: Add serial and graphics menu optionsJason Wessel1
The syslinux.bbclass already has support for automatically generated serial and graphics menu choices. This patch adds the same concept to the grub-efi menu. That makes it possible to generate a single image which can boot on a PCBIOS or EFI firmware with consistent looking boot options. [YOCTO #4100] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26bootimage.bbclass, grub-efi.bbclass: Improve EFI & PCBIOS+EFI ISO supportJason Wessel2
Using the latest mkisofs it is possible to generate 3 different types of ISO images, which can be used in various scenarios. 1) PCBIOS Only ISO - This option remains unchanged by this commit - Uses syslinux menus - Can be directly copied with dd to a USB device - Can be burned to optical media 2) EFI Only ISO - Uses grub 2 menus - Can be burned to optical media - If you want to use this image on a USB device extra steps must be taken in order to format the USB device with fat32, and copy an EFI loader which will in turn load the iso image 3) PCBIOS / EFI ISO - This is a hybrid image ISO that will work for case 1 or 2 as above with the same restrictions and boot menu types depending on what type of firmware is installed on the hardware or depending on if EFI or "Legacy Boot" is enabled on some UEFI firmwares. The syslinux.bbclass is now always required because that is where the isohybrid dependencies come from as well as the configuration data for the isohybrid. The isohybrid is the secret sauce which allows the ISO to work as optical media or as a disk image on USB or a HDD/SSD. [YOCTO #4100] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26grub-efi-native: Add support for EFI ISO imagesJason Wessel2
The iso9660 file system support needs to be added to grub in order to be able to correctly find the grub.cfg. The grub commands to locate the grub.cfg also needs to be encoded into grub's default configuration. This change allows the resulting grub binary to work both in the hard drive / USB boot case or the optical media boot case. [YOCTO #4100] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26testimage: Exclude BB_ORIGENV variableRichard Purdie1
The BB_ORIGENV variable isn't picklable and causes failures when generating the task signature for the autorun image mode. We don't want to depend on its contents anyway so lets exclude it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26builder: register text files with leafpadCristian Iorga1
Log files will open in leafpad under Build Appliance. Part of [YOCTO #4727] fix. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26packagegroup-self-hosted: add leafpad text editorCristian Iorga1
A text editor is needed to examine log files. Part of [YOCTO #4727] fix. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26classes/package_rpm: fix bitbake package-index for RPMPaul Eggleton1
The function that "bitbake package-index" relies upon when using the RPM package backend (package_update_index_rpm()) uses MULTILIB_PREFIX_LIST to get the list of package architectures to be indexed, but that variable is only set when populate_sdk_rpm or rootfs_rpm are inherited, which is not the case for the package-index recipe. Until we're able to refactor this properly, for minimal impact just use the value of ALL_MULTILIB_PACKAGE_ARCHS if MULTILIB_PREFIX_LIST does not give us any architectures (the equivalent function in the ipk backend uses the former variable). Having "bitbake package-index" working is important because it's the only practical way of indexing RPM packages for use as a feed; host versions of createrepo won't work properly because they won't support indexing recommends relationships. Stopgap fix for [YOCTO #5278]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26pseudo: warn twice if the 32-bit toolchain appears brokenRoss Burton1
Putting a warning at the top of do_compile is useful but not everyone reads the file from beginning to end, so use a trap to put the message at the bottom too. [ YOCTO #4919 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26pseudo: use bbnote/bbwarn instead of echoRoss Burton1
In the future bbnote/bbwarn will be integrated into bitbake's logging, so use those functions instead of echo directly. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26qt4-x11-free: disable QGtkStylePaul Eggleton1
This currently leads to a floating dependency on GTK+. Since most users in an embedded context won't need this, just disable it by default. Fixes [YOCTO #5116]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26gcc/libtool/perl: Fix various path to sed-native problemsRichard Purdie5
If sed-native is built before these programs, hardcoded paths to sed-native can end up in scripts and other parts of the system which may cause issues if they are later used from sstate and sed-native is not installed. To avoid this, this patch changes the global site configuration to specify that plain "sed" is fine to be used. We need to spell this out for gcc since it doesn't see the site files since we don't autoreconf it. We can remove the values from libtool. We tell perl to use "/bin/sed" since it requires a path and the system sed should be just fine for it. [YOCTO #4971] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26busybox: update mdev.confEric Bénard1
busybox 1.21.1 's mdev has changed the way the device's name is reported so now we get input/event0 instead of event0. I think this commit is responsible of this new behaviour : http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e Update mdev.conf according to this behaviour so that sound and input devices are correctly populated (and now /etc/mdev/find-touchscreen.sh is executed). Tested on an arm board. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26linux-yocto/3.10: common-pc* config updatesBruce Ashfield3
Bumping the 3.10 meta branch SRCREV to import the following config changes for tghe sugarbay and common-pc wifi fragments. dad2b7e common-pc-64: add kernel CONFIG options for sugarbay platform 37c617d common-pc-wifi.cfg: add support for broadcom wifi drivers [YOCTO #5117] [YOCTO #5238] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26adt-installer: add warning if MACHINE is not set in adt-installer.confLaurentiu Palcu3
Since the MACHINE can now be specified in adt-installer.conf, in order to install the proper toolchain and environment script for the given machine, add a sanity checking at the beginning to make sure MACHINE is set for the wanted architecture. Also: * uncomment the x86 target variables, in adt-installer.conf, in order to have qemux86 MACHINE set, by default, and also the sysroot installed (since it doesn't make much sense to install the toolchain without a target sysroot); * remove 'sudo' when creating relocate_sdk_tmp.py because the file is created in adt-installer directory; [YOCTO #5259] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26adt-installer: check if sudo is needed when installing target sysrootLaurentiu Palcu1
Currently, if SDK is installed in a directory that needs sudo preivileges, the target sysroot is also installed with sudo, even though the location is in users's home directory. This patch reuses the ownership checking code and uses it to check if sudo is needed for target sysroot too. [YOCTO #5259] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26package.bbclass: Clear umask when using os.mkdirRichard Purdie1
We switched to using os.mkdir with the file creation mode specified as the second parameter. Python masks this with umask behind the scenes which isn't what we want, we really want the permissions we specify. To avoid this we zero the umask beforehand and restore afterwards. Other solutions are possible but would not perform as well which is why we're using os.mkdir in the first place. Martin Jansa deserves the credit for debugging where the problem was. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26lib/oeqa/runtime: ping: wait for 5 echo repliesStefan Stanacar1
Instead of considering that ping test passed after 1 reply, wait for at least 5 consecutive replies in 60 seconds (which should be enough time for connman to reconfigure the interface in systemd images and help with the fake ssh/tests fails.) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 02:48:16 +0000