Age | Commit message (Collapse) | Author | Files |
|
I believe that powerpc-linux is now a common file across 32bit/64bit
linux for powerpc be it uclibc or glibc. I compared the differences
between powerpc-linux-uclibc and powerpc-linux files and it
powerpc-linux was more uptodate and all the new stuff it had was needed
for uclibc anyway so we do not need to keep exact copy of powerpc-linux
as powerpc-linux-uclibc instead we use powerpc-linux for powerpc/uclibc
targets.
Secondly linux specific files were added in archinfo dictionary
which I think logically belongs to targetinfo dictionary therefore
moved them to targetinfo
now uclibc/powerpc is buildable again
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
These functions are determined by the C library so move them to common-glibc
and common-uclibc
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
These are tests for glibc behavior which we have enabled in uclibc.
Note that if we ever disable MALLOC_GLIBC_COMPAT the uclibc tests
will need to be changed (but I believe this would also entail massive
patching to the rest of userspace so this should be unlikely).
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Note that we had a number of unused and ignored settings wrt mutex
support. These have been dropped as they weren't being used and
implied some odd things to boot. This is also a partial resync with
oe.dev which had some, but not all of these changes.
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
More re-sync with oe.dev
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Taken from oe.dev
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
More re-sync with oe.dev
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Part of re-syncing with oe.dev, move samba_cv_HAVE_IFACE_* to common-linux
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Pulled common options that are needed for powerpc64-linux to build
out of powerpc32-linux and put them into powerpc-linux.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use ac_cv_sizeof_* from eglibc as starting point for powerpc64-linux
site info. We will refactor common bits that are needed out of
powerpc32-linux based on build issues.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
powerpc-common was really Linux PPC32 specific. So move all the options
in it to powerpc32-linux and we can refactor out common bits shared
between into powerpc-linux and powerpc-common.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In oe.dev we have a sets to pick out hostos/hostarch/etc site
files out of and include things like a common-linux site file.
This should also help out with adding multilib-specific site files
(ie x32). In oe.dev we have an iterator but at Richard's request
we continue to return a list of files in siteinfo_get_files().
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
If left to configure, it tried to run the testcase
to determine this and that fails on cross compile
e.g. compiling startup-notification-0.12
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
|
These two setting for dlopen is not correct. dlopen is not available in libc,
instead it is provided by libdl. so the setting should not be "yes" by default.
This fixes [YOCTO #736] [YOCTO #737]
Thanks Richard for pointing out the root cause.
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
CC: Philip Balister <philip@balister.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Yu Ke <ke.yu@intel.com>
|
|
mips-uclibc needs the mips-linux-uclibc site file
x86_64-linux-uclibc is enahnced for missing cached variables
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Add entries for va_copy and __va_copy to fix rpm 5.4.0 compile errors
on x86_64.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
set dpkg va_copy value in corresponding site files for powerpc and mips
Fixes [BUGID #219]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
|
|
This is a simple userspace NFS server, derived from one which was
previously used in openSUSE 10.x. Wind River contributed many of the
patches.
This package is not intended for target installations, only -native
and -nativesdk use.
Enabling nativesdk for readline, sqlite3, and pseudo was required, as
well as a few new autoconf siteconfig entries.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
(borrow from OpenEmbedded with below tweaks)
Enhance login_defs_pam.sed according to shadow source, to ensuer we don't
leave any unknown definitions in /etc/login.defs when pam is enabled
no need for --disable-account-tools-setuid which is detected upon pam
automatically, and no specific CFLAGS append
move shadow site options to generic site files
adjust indention
RDEPENDS on a list of pam-plugins since they're separately packaged
test with both pam enabled and pam disabled. when pam is enabled, tried
some same tweak with desired effect.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
packages"
This reverts commit da9f079481ed65d541cf5b95b47b3b1db6d79c5e which turned out to
cause more problem that it fixed with libtool failures of:
| i586-poky-linux-libtool: link: unsupported hardcode properties
| i586-poky-linux-libtool: link: See the libtool documentation for more information.
| i586-poky-linux-libtool: link: Fatal configuration error.
as the hardcoded test result breaks libtool internal assumptions about linking on
Linux.
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Old 1.6.8p12 is quite old, even w/o source available now (only cached in pokylinux).
[Patches-Poky]
KEEP _autofoo.patch_: deal with bunch of autotool warnings/errors, more about
underquotes. In 1.7.2p7, those error conditions disappear.
But the underquotes fix is still valid to remove a bunch
of autoconf warnings
REMOVE _autofoo1.patch_: copy of autofoo.patch. no one uses it. REMOVE.
KEEP _noexec-link.patch_: use "-module" to avoid libtool complaining about not
starting with "lib". Add comment to the patch file.
DISABLE _nostrip.patch_: it's wrong to strip target binaries on build host. Borrow
from OE to use 'sed' instead of patch, but keept it for
remind to upstream
REMOVE _nonrootinstall.patch_: handle mode/owner population at install. It's not
requried at all since there's pkg_postinst to handle
it at right stage
Other misc stuff:
- update metadata information
- no need to use ${S} in 1.7.2p7
- fix idention
- use sed to disable strip
- changes from OE:
* disable PAM as our pam doesn't include necessary config files and plugs
* no need to special sudo_cv_uid_t_len tweak in the recipe. It's already there
in poky site files for a long time
* move sudo_cv_func_unsetenv_void to meta/site/common. Stdlib.h is common across
architectures in our libc headers, which conforms to POSIX standard
(borrow from openembedded 1.7.2p4)
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Signed-off-by: lan.yi.xun <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: lan.yi.xun <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: lan.yi.xun <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard@rex.(none)>
|
|
|
|
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Site and machine configuration for Mips architecture and
a qemumips target from Openembedded.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
of kdrive and building mesa. It's a big commit and it's still rather rough
around the edges, but there is a desire to get this in early so people can
review the work and help polish the changes.
Some of the notable bits:
• DRI support in mesa and the X server. (configured in machine conf via
MACHINE_DRI_MODULES variable)
• XCB backend for xlib
• A fairly lite X server build with lots of legacy modules disabled.
I'm sure there is plenty of other fairly low hanging fruit if we want to
put more effort into reducing the size of the xserver build. Currently the
server build comes in @ ~2.3MB vs a kdrive fbdev server build @ ~1MB. E.g
xaa could be made conditional to save ~320K. Of course the kdrive server
doesn't include glx stuff, which is a pretty big chunk.
Also thanks to hrw, since I nabbed a some patches from him for this, and RP,
for various bits of Poky style advice.
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5205 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
break the setting in pth
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4975 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4738 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4737 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4482 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4425 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4248 311d38ba-8fff-0310-9ca6-ca027cbcb966
|
|
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@4000 311d38ba-8fff-0310-9ca6-ca027cbcb966
|