summaryrefslogtreecommitdiff
path: root/meta/recipes-multimedia/gstreamer
AgeCommit message (Collapse)AuthorFiles
2015-12-16meta: Drop now pointless manual -dbg packagingRichard Purdie4
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg isn't needed in most cases, we can remove them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-12gstreamer1.0: Split bash completion information into separate packageMike Crowe1
Many targets won't even have bash installed so the completion information is completely useless. Follow the lead of other recipes and put it in a separate -bash-completion package. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-08package_regex.inc: split entries with odd-even versioning into their own recipesAlexander Kanavin4
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-08gstreamer: really fix the helper install raceRoss Burton1
My previous fix wasn't enough and just made the race rarer. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-08gstreamer1.0: Convert tests and valgrind config opts to PACKAGECONFIGsFabrice Coulon1
I need to be able to run unit tests and build with valgrind support. Signed-off-by: Fabrice Coulon <fabrice.coulon@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-01gstreamer1.0-plugins-good: fix PACKAGECONFIG for gudev and add one for v4l2 ↵Martin Jansa1
and libv4l2 * WARN: gstreamer1.0-plugins-good: gstreamer1.0-plugins-good-video4linux2 rdepends on libcap, but it isn't a build dependency? WARN: gstreamer1.0-plugins-good: gstreamer1.0-plugins-good-video4linux2 rdepends on libgudev, but it isn't a build dependency? WARN: gstreamer1.0-plugins-good: gstreamer1.0-plugins-good-video4linux2 rdepends on libudev, but it isn't a build dependency? WARN: gstreamer1.0-plugins-good: gstreamer1.0-plugins-good-video4linux2 rdepends on zlib, but it isn't a build dependency? Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-01gstreamer1.0-plugins-bad: fix dependencies for uvch264 PACKAGECONFIGMartin Jansa1
* ERROR: gstreamer1.0-plugins-bad: gstreamer1.0-plugins-bad-uvch264 package isn't created when building with minimal dependencies? * ERROR: gstreamer1.0-plugins-bad: gstreamer1.0-plugins-bad-uvch264-dev package isn't created when building with minimal dependencies? * it's because it should depend on libgudev not udev: configure: *** for plug-ins: uvch264 *** checking linux/uvcvideo.h usability... yes checking linux/uvcvideo.h presence... yes checking for linux/uvcvideo.h... yes checking for GST_VIDEO... yes checking for G_UDEV... no checking for LIBUSB... yes Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-01gst-plugins-bad: improve FILES variablesMartin Jansa1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-01gstreamer1.0-plugins-base: add PACKAGECONFIG for libvisualMartin Jansa1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-12-01guile, mailx, gcc, opensp, gstreamer1.0-libav, libunwind: disable thumb ↵Martin Jansa1
where it fails for qemuarm Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-25gstreamer1.0: fix install raceRoss Burton2
The install hook needs to be a data hook not an exec hook (because automake), the explicit dependency upstream added to fix the ordering results in install-helpersPROGRAMS executing twice and potentially racing. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-meta-base: set SUMMARY instead of DESCRIPTIONPaul Eggleton1
We only have a short description, so set SUMMARY and DESCRIPTION will be defaulted from it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-rtsp-server: upgrade to version 1.6.1Carlos Rafael Giani2
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-libav: upgrade to version 1.6.1Carlos Rafael Giani3
The lgpl PACKAGECONFIG is replaced by a gpl one, since the LGPL build is the default now. There is no --enable-lgpl switch anymore, it got replaced by --enable-gpl. Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-plugins-ugly: upgrade to version 1.6.1Carlos Rafael Giani2
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-plugins-bad: upgrade to version 1.6.1Carlos Rafael Giani4
0001-gl-do-not-check-for-GL-GLU-EGL-GLES2-libs-if-disable.patch is now in upstream, and therefore not needed as a separate patch anymore. 0001-glimagesink-Downrank-to-marginal.patch didn't apply anymore, and was adapted to the updated code. Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-plugins-good: upgrade to version 1.6.1Carlos Rafael Giani3
decrease_asteriskh263_rank.patch no longer applies, and is obsolete, since the asteriskh263 rank has been set to NONE in upstream. Also, --enable-xshm is no longer part of the configure options. Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0-plugins-base: upgrade to version 1.6.1Carlos Rafael Giani16
A number of patches had to be deleted in order for the recipe to work. Patches which cannot be applied cleanly to 1.6.1 and are nontrivial to fix: * 0001-basetextoverlay-make-memory-copy-when-video-buffer-s.patch * handle-audio-video-decoder-error.patch * taglist-not-send-to-down-stream-if-all-the-frame-cor.patch Patches which were rejected by upstream: * 0002-gstplaysink-don-t-set-async-of-custom-text-sink-to-f.patch Patches which either were backports or accepted and integrated: * 0001-video-frame-Don-t-ref-buffers-twice-when-mapping.patch * 0002-video-frame-Add-GST_VIDEO_FRAME_MAP_FLAG_NO_REF.patch * 0003-videofilter-Use-new-GST_VIDEO_FRAME_MAP_FLAG_NO_REF.patch * do-not-change-eos-event-to-gap-event2.patch * do-not-change-eos-event-to-gap-event3.patch * do-not-change-eos-event-to-gap-event-if.patch * fix-id3demux-utf16-to-utf8-issue.patch * videobuffer_updata_alignment_update.patch * videoencoder-Keep-sticky-events-around-when-doing-a-soft-.patch Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-11-16gstreamer1.0: upgrade to version 1.6.1Carlos Rafael Giani7
Removed patches which either were backports or accepted and integrated Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-01gstreamer-omx: Improve variable expansion of ${S}Richard Purdie1
The way ${S} is expanded into CFLAGS means the recipe is marked as depending on the path within which its built. We can avoid this by avoiding the expansion which then allows reuse of the recipe from sstate. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-29classes/meta: Add DISTRO_FEATURES check for gtk+/gtk3+Richard Purdie1
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you see failures due to dependency problems. The work in resolving this was partially completed a while back. This adds in the markup mainly for gtk/gtk3+ recipes and means "bitbake world" will work successfully. Rather than code the gtk/gtk+ specific distro features into each recipe, a shared variable is used. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-28gstreamer1.0-plugins-bad: change glimagesink rank to marginalAlexander Kanavin2
[YOCTO #7787] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-21gstreamer1.0: Fix basesink drop buffer errorYuqing Zhu2
Basesink: Shouldn't drop buffer when sync=false Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-12meta: Fix Upstream-Status statementsRoss Burton6
Fix a variety of problems such as typos, bad punctuations, or incorrect Upstream-Status values. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12gstreamer1.0: Fix QoS/lateness checking if subclass implements ↵Yuqing Zhu2
prepare/prepare_list vfuncs In function gst_base_sink_chain_unlocked(), it should calculate jitter based on current media clock, rather than just passing 0. Or it will drop all the frames when rewind in slow speed, such as -2X. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-12gstreamer1.0: Fix sticky events haven't been sent out when active track ↵Yuqing Zhu2
reach EOS EOS event hasn't been sent to down-element. The resolution is block EOS event of inactive pad, sending the event after the pad actived. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-24gstreamer1.0-plugins-*: Remove unused GSTREAMER_1_0_ORC variableCarlos Rafael Giani4
Nobody sets this. The orc packageconfig already does everything we need. Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-24gstreamer1.0-plugins: Ensure the native OE orcc is usedCarlos Rafael Giani1
Without this, gstreamer configure scripts may choose the host orcc instead Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Need more buffers in output queue for better ↵Yuqing Zhu2
performance Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Set need_segment after sink pad receive ↵Yuqing Zhu2
GST_EVENT_SEGMENT Subparse works in push mode, chain funciton will be called once up stream element finished the seeking and flushing. If set need_segment flag in src pad event handler, the segment event will be pushed earlier, result in the subtitle text will be send out to down stream from the beginning. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Enhance SSA text lines parsingYuqing Zhu2
Some parser will pass in the original ssa text line which starts with "Dialog:" and there's are maybe multiple Dialog lines in one input buffer. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Don't set async of custom text-sink to falseYuqing Zhu2
Setting async to false will lead A/V sync problem when seeking. The preroll need to use GAP event instead of setting async to false. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Make memory copy when video buffer's memory is ↵Yuqing Zhu2
read only Detect the memory flag and use gst_buffer_copy_region with GST_BUFFER_COPY_DEEP parameter to perform deep memory copy. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Do not change EOS event to GAP eventYuqing Zhu3
-Sending EOS event instead of GAP event as GAP event has error if A/V have the different duration. -Stop sending second track EOS event when returing failure after sending the first track EOS. Fixed by ignoring the return error. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Keep sticky events around when doing a soft resetYuqing Zhu2
The current code will first discard all frames, and then tries to copy all sticky events from the (now discarded) frames. So change the order. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Fix output buffer can't writable after ↵Yuqing Zhu4
frame_map() issue -Add GST_VIDEO_FRAME_MAP_FLAG_NO_REF This makes sure that the buffer is not reffed another time when storing it in the GstVideoFrame, keeping it writable if it was writable. -Use new GST_VIDEO_FRAME_MAP_FLAG_NO_REF to replace the old one because it's kind of ugly. -Don't ref buffers twice when mapping Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Update video alignment after video alignmentYuqing Zhu2
Video buffer pool will update video alignment to respect stride alignment requirement. But haven't update it to video alignment in configure. Which will cause user get wrong video alignment. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Handle audio/video decoder errorYuqing Zhu2
When there is input data and no output data to the end of the stream, it will send GST_ELEMENT_ERROR and quit from playing. The patch comments the GST_ELEMENT_ERROR() and just add GST_ERROR_OBJECT() information instead. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-11gstreamer1.0-plugins-base: Bug fix for id3demux issueYuqing Zhu2
Use g_utf16_to_utf8() instead of g_convert to fix the issue that id3 tags utf16 charaters cannot be extreacted in id3demux when try to get the id3v2 tag such as TIT2, TALB etc. Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-09gstreamer1.0-plugins-base: Enable pango packageconfig by defaultCarlos Rafael Giani1
There is no discernible reason why pango should be initially disabled, since the necessary dependency is already included in OE core Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-06-27gstreamer1.0-plugins-bad.inc: remove duplicate bzip2 dependencyAndre McCurdy1
Dependency on bzip2 is handled by the bz2 PACKAGECONFIG option, so bzip2 does not need to be included in DEPENDS. Also fix minor indent issue with bluez PACKAGECONFIG option. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-06-11gstreamer1.0-libav: fix build for i586 with gccRobert Yang2
Backport a patch from debian to fix the build for i586 with gcc, the patch is similar to libav's workaround-to-build-libav-for-i586-with-gcc.patch. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-06-08gstreamer1.0-plugins-base.inc: use x86 over-ride instead of i586Andre McCurdy1
Support i686 without needing to duplicate the i586 over-ride. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-05-20gstreamer: remove 0.10 recipesAlexander Kanavin68
gstreamer 0.10 is still available from meta-openembedded/meta-multimedia See also https://bugzilla.yoctoproject.org/show_bug.cgi?id=6294 http://lists.openembedded.org/pipermail/openembedded-core/2015-April/104276.html Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-15gstreamer1.0-plugins-bad: Move EGL requirement for WaylandOtavio Salvador1
The EGL is used by the Wayland backend. When building using Software Rendering and without Wayland support the EGL backend is not available so we should not require EGL for GLES2 support. This fixes following build error: ,---- | ... | checking for bcm_host_init in -lbcm_host... no | checking for WAYLAND_EGL... no | configure: error: Could not find the required EGL libraries | Configure failed. The contents of all config.log files follows to aid debugging | ERROR: oe_runconf failed `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-05-14gst-plugins-gl: add x11 to REQUIRED_DISTRO_FEATURESRobert Yang1
It can't be built withou x11 in DISTRO_FEATURES. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-05-09gstreamer1.0: Make check selectable via PACKAGECONFIGRicardo Ribalda Delgado1
This way, this configuration can be easily changed via .bbappend file without having to re-define the whole EXTRA_OECONF. With --disable-check libgstcheck is not build. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-09gstreamer1.0: convert GSTREAMER_1_DEBUG to PACKAGECONFIGRicardo Ribalda Delgado1
It is more elegant Suggested-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-21gstreamer: change priv_gst_parse_yylex argumentsChong Lu2
Change priv_gst_parse_yylex to fit new bison version, else we will get following error: | grammar.tab.c: In function 'priv_gst_parse_yyparse': | grammar.tab.c:67:25: error: too few arguments to function 'priv_gst_parse_yylex' | #define yylex priv_gst_parse_yylex | ^ Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-15gst-player: Fix typoGary Thomas1
The subtitle (shown in desktop icon) should say Basic media player -not- Basic media plaer Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 19:14:19 +0000