| Age | Commit message (Collapse) | Author | Files |
|---|
|
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New binary gdk-pixbuf-thumbnailer packaged in ${PN}-bin.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Six-monthly feature release, mostly bug fixes.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop backported libc_memfuncs.patch
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove a backported patch.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The previous fix works well for normal tasks since the ordering is always
correct and gdk-pixbuf-native comes first. Setscene ordering is reversed
so we can't rely on this there. Remove the fix in that case since
it breaks more than it solves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If for example gdk-pixbuf and lib32-gdk-pixbuf are in an image then only one
${bindir}/gdk-pixbuf-query-loaders will be installed, so only one variant will
actually be usable.
Solve this by moving gdk-pixbuf-query-loaders into ${libdir} as it's intimately
tied to the library and rarely directly invoked by the user, and update the
callers to use the right path.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a development tool, similar to gdk-pixbuf-csource, so move it to the
-dev package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If gdkpixbuf-native rebuilds and there are stale (broken) modules lying around,
it can fail to run the postinst. E.g. svg links to harfbuzz and if harfbuzz is
removed from the sysroot but the svg loader isn't, we get a symbol linking issue.
The reproducer is along the lines of build gdk-pixbuf-native along
with harfbuzz-native and librsvg-native, then make a small change to the
gdk-pixbuf recipe that would cause it to rebuild, clean harfbuzz-native
and then build gdk-pixbuf.
To fix this, when we install gdk-pixbuf, we wipe out any previous loaders.
The idea is that gdk would always come first and anything else installing
itself will come later and rerun the postinst if needed. We can therefore
just remove any other loaders.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The x11 packageconfig already takes care of the X11 dependency, and also
respects the DISTRO_FEATURES
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pixops: Be more careful about integer overflow
Integer overflow in the make_filter_table function in pixops/pixops.c
in gdk-pixbuf before 2.31.5, as used in Mozilla Firefox before 40.0 and
Firefox ESR 38.x before 38.2 on Linux, Google Chrome on Linux, and other
products, allows remote attackers to execute arbitrary code or cause a
denial of service (heap-based buffer overflow and application crash) via
crafted bitmap dimensions that are mishandled during scaling.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The tests are installed to $libexecdir not $libdir/gdk-pixbuf. By default these
are the same location but they can be changed independently.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop tests-check.patch as it has been merged into this release.
License checksums updated as the FSF address was changed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that gdk-pixbuf-query-loader failures can be identified as such (and executed
later, or run on the target) add a magic environment variable return loader
failures from main().
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's a configure option for GIO sniffing so don't use a patch to disable it.
Instead use a PACKAGECONFIG for this and default to off, as using GIO for
sniffing means a hard dependency on shared-mime-info.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of appending and using overrides, turn gdk-pixbuf-xlib into a
PACKAGECONFIG option and enable it for LSB-builds only.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
gdk-pixbuf 2.26 added a new binary gdk-pixbuf-pixdata, but no wrapper script was
added for it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Something along the lines of pngversion.patch was merged upstream, so drop that
patch.
Also use the new trim_version() function for a future-proof SRC_URI.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We assumed that the only relevant gdk-pixbuf loaders in the native environment
were the ones in gdk-pixbuf itself, as the icon cache is only for PNG files.
However, glib-compile-resources can transform SVG files to raw image data, and
done natively this requires the SVG loader to be registered. The current
implementation relies on this assumption by generating the cache based on the
staging directory during install, so if gdk-pixbuf-native is re-installed to the
sysroot after librsvg-native it will overwrite the loader cache.
So, remove the code in do_install that updated the cache, and rely on the new
logic in pixbufcache.bbclass that updates the cache when it's installed into the
sysroot itself.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We now have libpng 1.6. If we build libpng12 as well as libpng 1.6, the 1.2
version gets preferred which is not desirable and does not give deterministic builds.
We really do want to use libpng since the item in DEPENDS will provide this so
manipulate the search list so the one we DEPEND on gets chosen. This was the cause of a
recent autobuilder failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #3582]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The native install was invoking a binary in $S, but it's been built into $B.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Apparently gdk-pixbuf-query-loaders always returns 0 but writes any
errors to stderr. So, the conditional exit at the end of the command was
useless. Write the errors to a file and exit only if the file size is
greater than 0.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This will generate the loaders.cache file for pixbuf, at rootfs time.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this change, anything using linuxstdbase would incorrectly
try and pull in X dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
gtk-update-icon-cache is called for each subdir of ${datadir}/icons,
but there are some themes without an index.theme file such as
xcursor-transparent, so add -t(--ignore-theme-index) option to avoid
errors of gtk-update-icon-cache.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
|
|
If gtk+ is added to core-image-minimal, postinstall script failed on boot:
Running postinst /etc/rpm-postinsts/104...
gtk-update-icon-cache: No theme index file.
ERROR: postinst /etc/rpm-postinsts/104 failed.
This patch fixed the postinstall script to check for the icon
file first and not run the gtk-update-icon-cache if no icon
is installed.
[YOCTO #2905]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch fixes parallel install issue that lib libpixbufloader-png.la
depends on libgdk_pixbuf-2.0.la which will be regenerated during insta-
llation, if libgdk_pixbuf-2.0.la is regenerating and at the same time
libpixbufloader-png.la links it, the error will happen.
Error message is:
* usr/bin/ld: cannot find -lgdk_pixbuf-2.0
* collect2: ld returned 1 exit status
Make an explicit dependency to the libs install targets would fix this
issue.
[YOCTO #2883]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We turn on the xlib depdendency for linuxstdbase builds but
were missing the dependency on libx11. This adds the missing
dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
