Age | Commit message (Collapse) | Author | Files |
|
Pam_keyinit revoke causes issues on systemd systems. Make its use
optional. This brings it in line with Fedora 23 and Centos 7.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ac_cv_sizeof_off_t was previously in the site cache files, which was breaking
large file support and required a workaround in each recipe that actually wanted
to use large files.
Now that the entry has been removed from the site cache, we can remove the
workarounds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
ERROR: nativesdk-libsolv-0.6.19-r0 do_package: QA Issue: nativesdk-libsolv: Files/directories were installed but not shipped in any package:
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-constantids.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-history.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-pool.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-bindings.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/mergesolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/testsolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/installcheck.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/dumpsolv.1
It checks ${CMAKE_INSTALL_PREFIX}/share/man when configure, but it may
not exist when crosscompile, for example, when CMAKE_INSTALL_PREFIX="/",
it is OK, but when CMAKE_INSTALL_PREFIX="/some/path/else", then it
doesn't exist, and the man dir would be set to "/usr/man" which is
incorrect.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
aclocal: error: cannot open [snip] |: Argument list too long
Set acpaths to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The correct name for the bzip2 shared library is libbz2.so.1.0.6, not
libbz2.so.0.0.0. Pass -version-info to libtool to correct this.
Also fix the configure.ac so that is doesn't mention libXrender and has the
right version.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Initially I was reluctant to do this however makeinfo is a dependency
of the buildsystem and only adds around 400kb to the buildtools-tarball
so it likely makes sense to add it. This allows people to use
the project on older environments.
Need to enable nativesdk-texinfo but this seems straightforward.
[YOCTO #8990]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The configure script was using the cross-compiler for feature tests,
which fails to execute when the target is different than the host.
Change the script to use the build compiler instead, but use the
target include files to check for the target features.
[YOCTO #9359]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed the build error when building man.config.5 (a remnant of a long
ago previous patch). Optimized the manpages Makefile for parallel
builds. Drop a FHS patch that is no longer needed, as the standard
Makefile puts the man pages in the proper location. Also, fix compile
warnings in a couple other files.
[YOCTO #9341]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can replace __WORDSIZE with UINTPTR_MAX
sys/user.h is in conflict with asm/ptrace.h on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Makefile for man has a rule to create two generated targets with
a program run from the shell. Because the rule was run twice, with
parallel make, the generated files were being overwritten at the same
time they were being compiled. This patch forces the rule to be run
only once.
[YOCTO #9333]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 2016c release of the tz code and data is available. Its most urgent change is for Asia/Baku, where the update takes effect this weekend.
This release reflects the following changes, which were either circulated on the tz mailing list or are relatively minor technical or administrative changes:
Changes affecting future time stamps
Azerbaijan no longer observes DST. (Thanks to Steffen Thorsen.)
Chile reverts from permanent to seasonal DST. (Thanks to Juan
Correa for the heads-up, and to Tim Parenti for corrections.)
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Changes affecting past time stamps
Europe/Kaliningrad and Europe/Vilnius changed from +03/+04 to
+02/+03 on 1989-03-26, not 1991-03-31. Europe/Volgograd changed
from +04/+05 to +03/+04 on 1988-03-27, not 1989-03-26.
(Thanks to Stepan Golosunov.)
Changes to commentary
Several updates and URLs for historical and proposed Russian changes.
(Thanks to Stepan Golosunov, Matt Johnson, and Alexander Krivenyshev.)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In last patch it covered out the non-glibc case well
but did not define else case, when __GLIBC__ is not
defined, as a result errors like
| getcpu01.c:107:41: error: use of undeclared identifier 'sys_support'
| if (((tst_kvercmp(2, 6, 20)) < 0) || !(sys_support)) {
appeared, fixed it with this updated patch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
without-selinux doesn't work since WITH_SELINUX is always be defined no
matter which option is given: with-selinux, without-selinux.
This causes build errors if '--without-selinux' is used and libselinux
is not buildable in project:
atd.c:87:29: fatal error: selinux/selinux.h: No such file or directory
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
updated SRC_URI to http as it seems more stable.
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04 on
2016-03-27 at 02:00 local time. They need distinct zones since their
post-1970 histories disagree. New zone Asia/Barnaul for Altai Krai and
Altai Republic, Russia, which will switch from +06 to +07 on the same date
and local time. Also, Asia/Sakhalin moves from +10 to +11 on 2016-03-27
at 02:00. (Thanks to Alexander Krivenyshev for the heads-up, and to
Matt Johnson and Stepan Golosunov for followup.)
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016. (Thanks to Jean Antoine via
Steffen Thorsen.)
Palestine's spring-forward transition on 2016-03-26 is at 01:00, not 00:00.
(Thanks to Hannah Kreitem.) Guess future transitions will be March's last
Saturday at 01:00, not March's last Friday at 24:00.
Changes affecting past time stamps
Europe/Chisinau observed DST during 1990, and switched from +04 to
+03 at 1990-05-06 02:00, instead of switching from +03 to +02.
(Thanks to Stepan Golosunov.)
1991 abbreviations in Europe/Samara should be SAMT/SAMST, not
KUYT/KUYST. (Thanks to Stepan Golosunov.)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
change SRC_URI http seems more reliable
Changes to code
tzselect's diagnostics and checking, and checktab.awk's checking,
have been improved. (Thanks to J William Piggott.)
tzcode now builds under MinGW. (Thanks to Ian Abbott and Esben Haabendal.)
tzselect now tests Julian-date TZ settings more accurately.
(Thanks to J William Piggott.)
Changes to commentary
Comments in zone tables have been improved. (Thanks to J William Piggott.)
tzselect again limits its menu comments so that menus fit on a
24x80 alphanumeric display.
A new web page tz-how-to.html. (Thanks to Bill Seymour.)
In the Theory file, the description of possible time zone abbreviations in
tzdata has been cleaned up, as the old description was unclear and
inconsistent. (Thanks to Alain Mouette for reporting the problem.)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lighttpd fails to load when mod_cgi is enabled at run time, with the
message "dlopen() failed for: /usr/lib/mod_cgi.so /usr/lib/mod_cgi.so:
undefined symbol: chunkqueue_written".
This is caused by a patch intended to prevent memory exhaustion by
naively streaming CGIs, aimed at upstream issue
http://redmine.lighttpd.net/issues/1264 . The patch uses internal API
functions from older versions of lighttpd which don't exist in this
version. Remove the patch, pending a better fix.
[ YOCTO #9289 ]
Signed-off-by: Nick Leverton <nick@leverton.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes build issue on musl where it needs to link to sunrpc
when enabling nfs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Set UPSTREAM_CHECK_URI to the below listed URL:
http://www.mirrorservice.org/sites/lsof.itap.purdue.edu/pub/tools/unix/lsof
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Based as security reason, the system must limit users to
simultaneous system logins, or a site-defined number.
To avoid overwriting the /etc/security/limits.conf file after
upgrading this rpm package, we will define the file as
CONFFILES of package libpam-runtime.
Signed-off-by: Zhixiong Chi <Zhixiong.Chi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Backport patches to fix build failure caused by
'--without-jbig2dec' and '--without-jbig2dec'.
...
|make[1]: *** No rule to make target `obj/sjbig2_.dev',
needed by `obj/sjbig2.dev'. Stop.
...
http://bugs.ghostscript.com/show_bug.cgi?id=696497
- Previously, it did not build the whole local libpng
source in ghostscript, only picked up specific files
and compile them. But on ghostscript 9.18, when the
arm's FPU has been set to NEON (-mfpu=neon * with GCC),
the selected file "libpng/pngrutil.c" needs to link
'png_init_filter_functions_neon' which should be
compiled by a non-selected file "libpng/arm/arm_init.c".
...
|./obj/pngrutil.o: In function `png_init_filter_functions':
|armv7a-neon-poky-linux-gnueabi/ghostscript/9.18-r0/build/../
ghostscript-9.18/libpng/pngrutil.c:3921: undefined reference to
`png_init_filter_functions_neon'
...
So do not compile local libpng source in ghostscript,
use shared libpng to instead.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Porting three net-tools SCTP related patches from
<https://archive.fedoraproject.org/pub/archive/fedora/linux/releases/
12/Fedora/source/SRPMS/net-tools-1.60-95.fc12.src.rpm> to add support
for SCTP option.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_compile does this but do_install needs same env as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't assume that we know precisely what Python files were installed as patching
automake can change what optimised forms get installed by matching *.py* in
FILES and not deleting *.pyo explictly.
Similarly, remove all forms of test_cracklib from the packages.
The python .la file is mostly redundant but if we're shipping it, put it in
-python where it belongs instead of -staticdev.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With Integrity Measurement Architecture (IMA) enabled in Linux
kernel the security.ima extended attribute gets overwritten
when setting times on a file with a futimens() call. So it's safer
to set xattrs after times.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Inherit upstream-version-is-even as minor-odd releases (such as 4.5.x) are
development snapshots.
Change the SRC_URI back to using GNU_MIRROR now we're not using a development
release but a stable tarball.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
security flags add -pie -fpie to CFLAGS which is not
right options for compiling .so files, they are only
useful for compiling executables
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit e1a3c6e218779e2237c494e58209c06b871c47c4.
util-linux upstream, busybox, and sysvinit all install mountpoint by
default to /bin. Arch Linux, Debian, and Ubuntu (at least) all appear to
install mountpount to /bin. AFAIK only Fedora and possibly other Red Hat
derived distributions install it to /usr/bin.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Reviewed-by: Ken Sharp <ken.sharp@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also clean up use of immediate expansion as there are cleaner mechanisms now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pass -D__SANE_USERSPACE_TYPES__ to CFLAGS
MIPS64/PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead
defaulting to u64 == long in userspace. Define __SANE_USERSPACE_TYPES__
to get int-ll64.h included.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
3.3.4 -> 3.4
a) Removed the following upstreamed patch:
1. 0001-Define-_POSIX_C_SOURCE-if-undefined.patch
b) Added following patches to fix uclibc,musl and x32 build failures
1. 0001-mdadm.h-bswap-is-already-defined-in-uclibc.patch
2. 0001-util.c-include-poll.h-instead-of-sys-poll.h.patch
3. 0001-Fix-some-type-comparison-problems.patch
4. 0001-Fix-the-path-of-corosync-and-dlm-header-files-check.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
4.02 -> 4.03
a) Added PACKAGECONFIG for ldapmail
b) Added the following backported patches
1. 0001-Fix-build-with-disabled-ldap.patch
2. 0001-Do-not-accidentaly-override-commandline-passed-CFLAG.patch
c) Removed following patch due to changes in buildsystem
1. config-tcpwrappers.patch
d) Added libnl and dbus in build-deps
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Unlike the other recipes that I've fixed recently, this one manifests
itself in a more subtle way by failing a QA check.
Reported-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Lower the priority of the standalone mktemp package, so that
finally the mktemp command installed into SDK image is
coreutils.mktemp.
coreutils.mktemp is widely extended to support more feature,
and could not break some existing scripts and common usecases.
For example: at least three 'X's, and mktemp XXX.pdf(do not
have to be the trailing character for 'X')
Signed-off-by: Zhixiong Chi <Zhixiong.Chi@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For libarchive-native, we don't really need libxml2 support. Adding this
means we need libxml2-native which means we need python-native and
makes the dependency chains pretty heavy. The target case is unaffected.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|