summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools
AgeCommit message (Collapse)AuthorFiles
2013-06-04gcc: Workaround for compiler flag mismatchMark Hatle2
When cross compiling the target compiler, both the cross-compiler and the host compiler are used. However, the -W options used were discovered from the cross-compiler and may be incompatible with the host compiler. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-04makedevs: Make count actually behave as a count for device blocksPeter Kjellerstedt1
Previously count actually behaved as end, and did not take start into account. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-04gdb: don't build with LZMASaul Wold1
This was a floating dependency that got added in recently and was caught on the Autobuilder, disable building with LZMA to ensure consistent builds Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-03binutils: fix compile error of complex expressions before @l/@hZhenhua Luo3
Back port two patches to fix the error of complex expressions before @l/@h. Error sample: test.s: Assembler messages: test.s:1: Error: operand out of range (0xffffffffffff8000 is not between 0x0000000000000000 and 0x000000000000ffff) Fix Bug 4524. Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-03apt-native: Fix incorrect checksumsRichard Purdie1
The apt recipe had the correct checksums, the -native did not. Depending on which downloaded first, the build could succeed or fail. This patch corrects the checksums for -native to match the apt recipe. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-31rpm: remove .real hacks in argument parsingRoss Burton1
The argument parser in RPM was patched to look for <binary>.real, but since the wrapper now fakes the right argv[0] rpm wasn't able to parse any options. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-31dpkg: Be deterministic about lzma dependencyRichard Purdie1
dpkg has no DEPENDS on lzma so turn it off explicitly. [YOCTO #4518] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-31file: remove obsolete version check patchJonathan Liu2
After e8d2a2a3646f964ec61ece62e14788cd7184dd01 [OE-Core], file --version returns file-5.14 instead of file.real-5.14 so the patch is no longer necessary and causes the build to fail with the following: | Cannot use the installed version of file (file-5.14) to | cross-compile file 5.14 | Please install file 5.14 locally first Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30python-smartpm: add gettext-native to DEPENDSPaul Eggleton1
Fixes the following failure at do_install building python-smartpm-native if gettext-native has not already been built and gettext tools are not installed on the host: | compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo | sh: msgfmt: command not found ... | creating $D/usr/share/share/locale/it/LC_MESSAGES | error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file Note that we need gettext-native in DEPENDS and not "inherit gettext" here because for native variants, gettext.bbclass instead adds gettext-minimal-native to DEPENDS and that does not provide the msgfmt command. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Avoid unnecessary timestamp calculationPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Make the mode number readable in debug messagesPeter Kjellerstedt1
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Correct the device number calculation for blocks of devicesPeter Kjellerstedt1
If the increment > 1 and the start > 0 then the calculation for the minor device number was incorrect. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30makedevs: Create blocks of devices with the correct uid/gidPeter Kjellerstedt1
When creating a block of devices (i.e., when count > 0), the wrong path was used with the call to chown(), effectively trying to change the owner of some (probably) non-existent file. Thus the created device nodes were always owned by root. Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30guile: added runtime dependency on glibc-gconv-iso8859-1Bogdan Marinescu1
guile needs to be able to convert strings from ISO-8859-1 in order to work properly. This patch adds a runtime dependency to the required convert package, but only when glibc is used. The fix for uClibc depends on another bug (#4530). [YOCTO #4019] Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30python-scons-native: fix invoking scons failed on Fedora-17Hongxu Jia1
While the destro didn't install scons, build scons by python-scons-native, and invoke it with the error: ... $scons -h Traceback (most recent call last): File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module> import SCons.Script ImportError: No module named SCons.Script ... 1, While building scons as default, scons's lib will be install in the dir of `scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly. 2, While build python-scons-native, `--install-lib' is explicitly set, and scons's lib was not installed in the dir of `scons' or `scons-2.3.0'. 3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/ ${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/ scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}. Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON _SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib. [YOCTO #4562] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30pkg-config: remove obsolete AM_PROG_CC_STDCMarko Lindqvist2
Add patch obsolete_automake_macros.patch that removes AM_PROG_CC_STDC from included glib tree. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-30patch: use PACKAGECONFIG to ensure correct dependency for xattrSaul Wold1
This will enable or disable xattr with the correct dependency on attr as needed. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29dpkg-native: Fix native perl pathMing Liu1
The path to the native perl was incorrect leading to rootfs failures. This patch corrects that problem, it's a complementary fix for commit:04432446. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29guile: don't search for libreadline in host libdirJackie Huang1
Fix the QA warning: WARNING: guile: The compile log indicates that host include and/or library paths were used. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-29gdb-cross-canadian: use correct exec-prefix path for pythonSamuli Piippo1
Incorrect exec-prefix path was given to gdb which leads to gdb startup failure when SDK is not installed to its original destination. Gdb relocates the exec-prefix path, so it will work for SDKs that are installed to different location. PYTHONHOME env in no longer neeeded for gdb. [YOCTO #3839] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29binutils: add two AArch64 related backports to 2.23.2Marcin Juszkiewicz3
Update required to pass "movi" related build errors when gcc-4.8 is used. libgcrypt, slang, mysql5 were failing like this: | {standard input}: Assembler messages: | {standard input}:316: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-106' | {standard input}:348: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-8' | {standard input}:352: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-27' Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29autogen-native: upgraded to 5.17.4Bogdan Marinescu2
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29python-dbus: upgraded to 1.2.0Bogdan Marinescu2
The license itself didn't modify, just some comments regarding the license. Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29git: upgraded to 1.8.3Bogdan Marinescu1
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-29apt: Updated from 0.9.7.8 to 0.9.8.1Ionut Radu11
Signed-off-by: Ionut Radu <ionutx.radu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24binutils: the cat should always succeed when building config.cacheSaul Wold1
There is a race condition between when the CONFIG_SITE list is generated and then used here via the cat to create the config.cache and in *all* configure scripts when reading from CONFIG_SITE. The race in this case is that the sstate setscene task runs on a package that contains a site config file (ncurses in this case) and then bitbake decides that it needs to rebuild and cleans out the site config file, so it existed for siteinfo_get_files() to find in SITECONFIG_SYSROOTCACHE and then was removed for the rebuild. When bintuils tried to run the do_configure() task which creates the binutil's version of config.cache it reads from CONFIG_SITE which now contains the non-existant site config file. (confused yet ;-)? Currently the configure script does a test -r to ensure the file is readable before using it, therefore having the cat succeed regardless of the file being available is consistent behaviour. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24qemu: Updated from 1.4.0 to 1.4.1Ionut Radu3
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch and 3f08ffb4a4741d147634761dc053ed386243a0de.patch were backported in 1.4.1 Signed-off-by: Ionut Radu <ionutx.radu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24patch: diable xattr as defaultSaul Wold1
There is a optional dependency on xattr (and thus the attr package), disable it by default, to ensure it builds correctly. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24perl-tests: convert to ptestJesse Zhang4
On 05/17/2013 05:31 PM, Björn Stenberg wrote: > Unless there are clear advantages with patching t/TEST that I have overlooked, I suggest using sed in run-ptest instead. Ok.. Here is the new commit. Removed the patch and added a call to sed in run-ptest. See attachment for the test log. From: Jesse Zhang <sen.zhang@windriver.com> Date: Tue, 14 May 2013 02:53:30 -0400 Subject: [PATCH 1/1] perl-tests: convert to ptest Replace PERL_TEST_DIR with PTEST_PATH, and rename "tests" with "ptest" in various places. Also add a run-ptest script. [YOCTO #4292] Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24cmake: Update to 2.8.11Saul Wold5
Rebased support-oe-qt4-tools-names as some of the changes where added in the upstream code. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24mklibs: Update to 0.1.37Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24desktop-file-utils: Update to 0.21Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-23rpm-postinsts.bb: enable postinst loggingChen Qi1
Enable postinst logging by checking the configuration in ${sysconfdir} /default/postinst. In this way, the postinst logging is enabled if 'debug-tweaks' is in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuild if IMAGE_FEATURES is changed. [YOCTO #4262] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-23opkg: modify the run-postinst script to enable postinst loggingChen Qi1
Enable postinst logging by checking the configuration in ${sysconfdir} /default/postinst. In this way, the postinst logging is enabled if 'debug-tweaks' is in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt if IMAGE_FEATURES is changed. [YOCTO #4262] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-23dpkg: modify the run-postinst script to enable postinst loggingChen Qi1
Enable postinst logging by checking the configuration in ${sysconfdir} /default/postinst. In this way, the postinst logging is enabled if 'debug-tweaks' is in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt if IMAGE_FEATURES is changed. [YOCTO #4262] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-21cdrtools-native : upgrade to 3.00Andrei Dinu3
Upgrade from 2.01 -> 3.00 - Updated md5 of the license file because new information was added by the owner. - Removed glibc-conflict-rename.patch because it is not required anymore. - Updated no_usr_src.patch because it didn't apply. Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-21opkg: remove unnecessary extra leading slash in run-postinstsJonathan Liu1
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-17python-pygobject-native: fix build dependency on python-nativeCristian Iorga1
The class-native override is undoing the dependency that distutils-base added which we require. This patch adds in the missing dependency manually to ensure the build functions correctly. Fixes [YOCTO #4502]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-17rpm-postinst: remove un-needed RDEPENDS on base-filesSaul Wold1
This was transferred un-intentionally when we split the rpm code, the base-files then layed down additional files (specificaly /etc/mtab) in the initramfs image and caused problems for the installer code. Removing the RDEPENDS will fix the image generation issue and thus the installer, so we will need to revert a previous patch that attempted to fix the earlier issue #4229. [YOCTO #4504] [YOCTO #4229] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-16tcf-agent: Use common two-digit sequence numbers for init script linksStefan Herbrechtsmeier1
The common init script links use two-digit sequence numbers and systemd interprets everything behind the two-digits as service name. This leads to the following failure during boot: Cannot add dependency job for unit 9tcf-agent.service Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-05-16binutils: Add broadcom XLP supportKhem Raj2
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-16pkgconfig: Update to 0.28Saul Wold8
Remove older patches that have been fixed upstream, added new patch to use the correct alias-libtool instead of ./libtool. pkgconfig provides an internal glib library, so use it to avoid ciruclar dependecny issues. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-16syslinux: Update to 4.06Jonathan Liu4
Patches are now part of upstream or no longer needed. Added new util-linux dependency for isohybrid. Paths updated to reflect directory structure changes. Add CFLAGS and LDFLAGS overrides. [YOCTO #4438] Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12Upstream-Status: Correct CapitalizationSaul Wold3
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12tcl: upgraded to 8.6.0Bogdan Marinescu5
The license checksum changed because of a small correction in the license text. Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12gdb-cross-canadian: set everything in gdb-cross-canadian.incMarcin Juszkiewicz2
This allows out-of-tree versions to include one file to have all set. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12gdb: add 7.6 versionMarcin Juszkiewicz6
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12autogen: upgraded to 5.17.3Bogdan Marinescu2
'guile.patch' updated for the new version. Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12libtool-nativesdk: rename to nativesdk-libtoolWenzong Fan1
Rename nativesdk item to prefix vs suffix. Some minor changes for getting it works after renamed: * append patches dir 'libtool/' to FILESEXTRAPATHS * update ${S}, append '${datadir}/libtool/*' to FILES_${PN} Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12subversion: upgraded to 1.7.9Bogdan Marinescu3
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-23 12:09:17 +0000