summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools
AgeCommit message (Collapse)AuthorFiles
2013-09-11python-smartpm: Add an attempt install modeMark Hatle2
[ YOCTO #3723 ] Add a mode to smart that will allow an installation to continue, instead of failure in the case that one or more items is uninstallable. Uninstallable packages are simply ignored, and no error is generated. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10btrfs-tools: fix a parallel build issueRoy Li2
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-10adt-installer: allow installation of other machinesLaurentiu Palcu5
Currently, adt-installer allows only the installation of qemu target sysroots. The changes in this patch do the following: * add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for each target architecture. For example, for arm we can choose to use a qemuarm sysroot or a beagleboard sysroot. By default, only the qemu target sysroots are selected (current behavior); * change adt_installer scripts to allow installing the correct meta-environment package for the selected machine; * remove some left-over commented lines; * use packagegroup-cross-canadian-${MACHINE} when installing the cross canadian packages instead of doing it separately for each package; * change the opkg config files in order to be able to find the packagegroup package, which is allarch; [YOCTO #4783] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06run-postinsts: move script execution from S98 to S99 in rcS.dLaurentiu Palcu1
Apparently, when opkg/dpkg and run-postinsts are installed in the same time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d. This will make run-postinsts script useless and the delayed postinstalls will not be run. This issue happens only when 'package-management' is disabled and, in the same time, dpkg/opkg ends up in the image: either pulled by some dependency or manually installed. With this patch, both opkg/dpkg and run-postinsts scripts will run but the former will silently fail because the package metadata is removed from the image since 'pacakge-management' is disabled. [YOCTO #4484] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06gcc-runtime: Add packaging for libgfortran (and also tweak others)Richard Purdie2
Add packaging for libgfortran and libquadmath as well as tweak the packaging for libmudflap since it was broken. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06distcc: add init.d/distcc status command for LSB complianceRoy.Li1
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-06pseudo: fix memory leak and missed privilege dropPeter A. Bigot2
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to pseudo functions that may not exist in the target environment. This patch detects the addition of that variable within the environment to which the call applies, even if not present in the parent environment. As a side effect it fixes a memory leak. [YOCTO #4843] Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-04flex: Only use create_wrapper for native and nativesdkOlof Johansson1
The create_wrapper functions of utils.bbclass cause implicit dependencies on bash, which may not be suitable for deployment on target. Besides, the wrapper doesn't seem to be necessary on target. Signed-off-by: Olof Johansson <olofjn@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-02elfutils: Drop do_autoreconf patchesRichard Purdie4
The do-autoreconf patches only change generated files. We run autoreconf ourselves so we don't need these patches. Worse, they cause failures since the do_patch task can't rerun after configure since the files change and the patch is no longer clean. Drop the patches since we don't need them. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-01meta: Don't use deprecated bitbake APIRichard Purdie2
These have been deprecated for a long time, convert the remaining references to the correct modules and prepare for removal of the compatibility support from bitbake. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30python: Backport 2 CVE from upstreamSaul Wold3
These are back ports of 2 patches from upstream to address CVE-2011-4944 CVE-2013-4238 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30perl: Backport 2 CVE PatchesSaul Wold3
These patches are backported from upstream since it might be risky to update right now They address the following CVEs CVE-2012-6329 CVE-2013-1667 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30btrfs-tools: Add dependency on lzo acl e2fsprogsRoy.Li1
Add dependency on lzo acl e2fsprogs to fix the below building failure 1. commit b268a417259b9[add lzo compression support to restore] needs lzo cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory 2. btrfs-tools includes <sys/acl.h> which is provided by acl btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory 3. btrfs-tools always needs e2fsprogs btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30gcc-4.8: fix ICE of cross-compile for PowerPC e500v2 targetsChunrong Guo2
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7 * fix the segfault issue of dd on e500v2 targets Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1, accordingly %Ld format of sprintf is disabled. Address Bug 4910 - [p1022ds]urandom: segmentation fault Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-30remove the unnecessary protocol parametersJackie Huang10
It's not necessary to specify the protocol parameter when it's the default protocol for the fetcher, e.g. the default protocol for git fetcher it git, "protocol=git" isn't needed. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28python-docutils: add version 0.11 from meta-oeMihai Prica1
Docutils is a text processing system for processing plaintext documentation into useful formats(HTML, XML, man-pages). This is required by the Midori web-browser. * Update 0.5 from meta-oe to 0.11. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28vala: add version 0.16 from meta-oeMihai Prica3
Vala is a C#-like language dedicated to ease GObject programming. It is required by the Midori web-browser. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-28dpkg: fix configuration issue for mips64Joe Slater2
CQID: 431771 configure cannot determine the proper cpu, os, or architecture for mips64, and possibly other arch's, because of faulty code added to Arch.pm in the latest release from upstream. We remove that code. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-27gcc-4.8.inc: Allow lto to be configurableRichard Purdie1
For some platforms its useful to be able to configure LTO so provide a variable to allow this to happen. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26python-2.7-manifest: Add missing python-ctypes dependency to ↵Richard Purdie1
python-multiprocessing Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26opkg: add missing initialization of conf->exclude_listJonathan Liu1
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26ccache: update to upstream version 3.1.9Marko Lindqvist2
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: add populate-extfs.shRobert Yang2
This script is originally from Darren Hart, it will be used for creating the ext* filesystem from a given directory, which will replace the genext2fs in image_types.bbclass at the moment, we may use the mke2fs to replace this script again when it has the initial directory support. Changes of the script: * Rename it from mkdebugfs.sh to populate-extfs.sh * Add a simple usage * Add checking for the number of the parameters * Add the "regular empty file" and "fifo" file type * Set mode, uid and gid for the file * Save the command lines to a file and batch run them * Change the error message * Improve the performance * Add the support for hardlink [YOCTO #3848] Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: properly set up extent header in do_writeRobert Yang2
do_write doesn't fully set up the first extent header on a new inode, so if we write a 0-length file, and don't write any data to the new file, we end up creating something that looks corrupt to kernelspace: EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0) Do something similar to ext4_ext_tree_init() here, and fill out the first extent header upon creation to avoid this. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: only update the icache for ext2_inodeRobert Yang2
We only read the cache when: bufsize == sizeof(struct ext2_inode) then we should only update the cache in the same condition, otherwise there would be errors, for example: cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full() cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full() Then update the cache: cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full() Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was cached by bufsize = 156), so there would be errors. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: let debugfs do sparse copyRobert Yang2
Let debugfs do sparse copy when src is a sparse file, just like "cp --sparse=auto" This patch has been reviewed by the linux-ext4 mailing list, but isn't merged atm. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: the max length of debugfs argument is too shortRobert Yang2
The max length of debugfs argument is 256 which is too short, the arguments are two paths, the PATH_MAX is 4096 according to /usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux systems), that's also what the ss library uses. This patch has been reviewed by the linux-ext4 mailing list, but isn't merged atm. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26guilt: update to latest git versionBruce Ashfield14
Uprev guilt to the latest guilt version from its upstream repository. As part of the uprev all of the previous changes required for the yocto kernel tools to use git to manipulate series files have been dropped. These changes were specific to circumventing parts of guilt's internal santiy checking to allow specific Yocto kernel manipluation of sub-series files. Since the kernel tools no longer need guilt, we can use an up to date and nearly pure upstream version of guilt. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-4.8: Add two patches to deal with cross-canadian build failuresRichard Purdie3
See the patch headers for more information about the cross-canadian build failures these patches avoid. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22Drop darwin8/darwin9 usageRichard Purdie1
There were darwin8/darwin9 overrides spinkled in the code from times gone by. Lets settle on the darwin override and remove the others since its pointless duplication. We always inject darwin into OVERRIDES if needed in the darwin8/9 cases. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-common.inc: Drop unused LIBGCCS_VAR variableRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross.inc: Clean up after mergeRichard Purdie1
* Remove the duplicate EXTRA_OECONF_PATHS that is overwritten * Merge the do_compile and do_compile_prepend * Group dependency and configuration variables together Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-canadian: Fold configure-sdk and package-sdk into the main .incRichard Purdie3
This also has the advantage of removing the confusing sdk naming which has been purged everywhere else in favour of cross-canadian. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-*-runtime.inc: Fold configuration into gcc-runtime.incRichard Purdie4
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-*-cross.inc: Fold common configuration into gcc-cross.incRichard Purdie3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-target: Combine gcc-target-configure.inc, gcc-target-package.inc and ↵Richard Purdie4
other common code Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22libgcc: Move common code to libgcc.incRichard Purdie3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-runtime: Fold common configuration into gcc-configure-runtime.incRichard Purdie3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-initial: Fold common configuration into gcc-cross-initial.incRichard Purdie3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross: Fold common configuration into gcc-cross.incRichard Purdie3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22bitbake.conf/classes/gcc: Don't hardcode -nativesdkRichard Purdie3
Hardcoding -nativesdk as the sdk package architecture is inflexible. We may have multiple different target OS and we need a way to be able to separate them. Turning this into a configurable value allows the flexibility we need to build different SDKMACHINEs with different OS targets. The commit should have no behaviour change, just makes things more configurable. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-canadian: Merge 4.7 and 4.8 recipes into common includeRichard Purdie3
This removes duplication and follows the pattern of the other gcc recipes. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-canadian-4.8: Add missing dependency on nativesdk-zlibRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-canadian-4.8: Allow elfutils to be a configurable dependencyRichard Purdie1
Some SDK platforms have elfutils support, some do not, therefore allow this to be configured. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc: Drop gcc-cross4.inc, its pointless nowRichard Purdie4
The include was useful historically, its not anymore so lets remove it. This should have no functional change except on any layers directly depending on it or gcc-cross.inc but even then it would only impact sh4 and is easily fixed if there was a problem. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-configure-sdk.inc: Don't build target-libgccRichard Purdie1
I don't understand why we're building the target libgcc in the canadian-cross build since it should have been built elsewhere. The compiler configuration isn't correct to build a working target libgcc in all cases anyway. To avoid various weird build errors, stop building it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-package-sdk.inc: Allow executable extension to be overriddenRichard Purdie1
On platforms like windows, executables have extensions. Whilst I'm not proposing we wholesale support windows extensions, this small tweak allows a cross compiler targetting mingw to be built which does seem like a good use case. The patch therefore adds an EXEEXT which the mingw layer can set for the libexec symlinks. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-package-sdk.inc: Use relative symlinks in libexec dirRichard Purdie1
We already use relative links for other gcc libexec links, this changes the sdk do_install to match elsewhere and use relative symlinks too. This makes things slightly easier in the SDK installation process and standardises. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22gcc-cross-canadian-4.8: Enable PARALLEL_MAKERichard Purdie1
This disabling of PARALLEL_MAKE has been forward ported for gcc-cross-canadian since at least 2009-09 and gcc 4.3.3, probably older. I've tested this with high values of parallel make and it all seems to work and we usually build gcc with parallel make so it seems unlikely there are issues. Lets therefore enable it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-22valgrind: Backport patch for eglibc 2.18Saul Wold2
Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-01 18:13:48 +0000