Age | Commit message (Collapse) | Author | Files |
|
The following error can occur:
smart install libc6-2.22-r0.1@lib32_mips32r2octeon3 libc6-dbg-2.22-r0.1@lib32_mips32r2octeon3
error: file /sbin/ldconfig conflicts between attempted installs of libc6-2.22-r0.1.lib32_mips32r2octeon3 and libc6-2.22-r0.1.octeon3_n32
error: file /sbin/.debug/ldconfig conflicts between attempted installs of libc6-dbg-2.22-r0.1.lib32_mips32r2octeon3 and libc6-dbg-2.22-r0.1.octeon3_n32
This was because:
transactions_color = 001 (ELF32) & 010 (ELF64) & 100 (ELF32 N32 MIPS64)
FColor = Current file color (001) & transaction_color (111)
oFcolor = Previous file color (100) & transaction_color (111)
There are two places where the conflict comparisons occur. In both places
the 'else' clause was too restrictive (opposite of the 'positive' clause).
This caused the system to only permit a binary comparison - "new preferred" or
"old preferred". It did not permissing "neither preferred". By removing the
else comparison the system will now perform a 'last-in-wins' resolution when
"neither is preferred".
Note, if _transaction_color is 3, MIPS64 N32 will be skipped (pretend as
installed).
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In a multilib install RPM will break a conflict using the transaction color.
However, by default MIPS64 N32 transactions are not enabled.
This change always enables them. This is effectively a no-op on non-MIPS
systems, and required if we need to support N32 on MIPS.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Import patch fixing a bug that caused ICE when compiling some packages
(e.g. ICU) in Thumb-1 model.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Import patch fixing a bug that caused ICE when compiling some packages
(e.g. ICU) in Thumb-1 model.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
explicit
When a project is configure to use sstate cache and has the host tool sysroot
cleaned, gcc-cross-initial may fail to be configured due to lack of
gnu-configize tool.
gcc-cross-initial recipe has autotools dependency inhibited, and the same flag
variable also excludes the gnu-config-native. Though there is an indirect
dependency through libmpc-native, it's not safe with sstate cache being used.
Moreover, gnu-config-native requires a perl package from autoconf-native to
run, otherwise it will fail with "Can't locate Autom4te/ChannelDefs.pm in @INC"
message.
This patch makes both dependencies explicit for gcc-cross-initial's
configuration.
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the target and host have the same type, the system
may try to execute the instructions from the target
version. This can lead to illegal instructions
as well as the wrong copy of the code running.
Add CROSSPYTHONPATH for PYTHON_FOR_BUILD and export
the correct path to fix it.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add the necessary bits for nios2 support into cmake.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
recipes
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is 'N32 MIPS64', not 'N32 MIPS32' as command file shows:
$ file image/usr/bin/getent
getent: ELF 32-bit MSB executable, MIPS, N32 MIPS64 [snip]
And "rpm -qp --filecolor" was wrong (it was 1, but should be 4), which
caused multilib installation error.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The .inc file included version information and wasn't used anywhere as the same
.bb handles all variations, so merge them to reduce complexity.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
0.28 -> 0.29
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
0.4.23 -> 0.4.24
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This dependency is floating otherwise, It races against openssl-native
and when openssl config does not match with openssl on build host the
build fails occasionally
x86_64-linux/usr/include/openssl/ripemd.h:70:4: error: #error RIPEMD is
disabled.
# error RIPEMD is disabled.
Change-Id: I5ff6d8f058ff99c64ad4dc7c0377724071003ae6
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the class nativesdk.bbclass is inherited, it redefines TARGET_CC_ARCH,
in the case of python3, this enables debug, causing an error while linking,
since we dont enable debug during configure theres no declaration of some
functions, this patch makes sure we keep debug disabled, fixing the linking errors.
[YOCTO #8467]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-native_3.4.3.bb -> python3-native_3.5.0.bb:
- changed version
- changed cheksum
- no license change, just dates
python3_3.4.3.bb -> python3_3.5.0.bb:
- changed version
- changed cheksum
- no license change, just dates
New:
- use_packed_importlib.patch: Fixes importlib on cross-compile environments
Rebased:
- Manifest
- 000-cross-compile.patch
- 020-dont-compile-python-files.patch
- 04-default-is-optimized.patch
- python-3.3-multilib.patch
- distutils3-base.bbclass
- distutils3-native-base.bbclass
- python3native.bbclass
Upstream:
- makerace.patch
Misc:
- pip2 is handled as default on major distros,
modified python3-pip to leave /usr/bin/pip available for pip2
- Fixed importing pip3 from python3 interpreter
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Python-git depends on getpass, which is part of python-unixadmin.
If it is missing:
root@qt5022:~# python
Python 2.7.9 (default, Nov 12 2015, 17:41:32)
[GCC 5.2.0] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import git
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/git/__init__.py", line 35, in <module>
from git.config import GitConfigParser
File "/usr/lib/python2.7/site-packages/git/config.py", line 21, in <module>
from git.util import LockFile
File "/usr/lib/python2.7/site-packages/git/util.py", line 14, in <module>
import getpass
ImportError: No module named getpass
>>>
Reported-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
where it fails for qemuarm
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The svn_repos_trace_node_locations function in Apache Subversion before
1.7.21 and 1.8.x before 1.8.14, when path-based authorization is used,
allows remote authenticated users to obtain sensitive path information
by reading the history of a node that has been moved from a hidden path.
Patch is from:
http://subversion.apache.org/security/CVE-2015-3187-advisory.txt
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
mod_authz_svn in Apache Subversion 1.7.x before 1.7.21 and 1.8.x before
1.8.14, when using Apache httpd 2.4.x, does not properly restrict
anonymous access, which allows remote anonymous users to read hidden
files via the path name.
Patch is from:
http://subversion.apache.org/security/CVE-2015-3184-advisory.txt
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Statically link local libs to avoid gold link issue. This is clearly
a workaround, but does get us past the failures with systems using gold by
default until we find a better solution.
[YOCTO #2972]
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This silences a GNU_HASH warning when using external toolchains. The patch is
courtesy Abdur Rehman <abdur_rehman@mentor.com>.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Allocation tracing has been removed from GLib 2.46 and trying to use
it results in an ugly warning: Backport patch to not use it in Qemu.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch is based on the patch for gcc-5.2 (41cbfd7af60f93a4bd496b7b6bf477215a286950)
When doing a FOR_BUILD thing, you have to override CFLAGS with
CFLAGS_FOR_BUILD. And if you use C++, you also have to override
CXXFLAGS with CXXFLAGS_FOR_BUILD.
Without this, when building for mingw, you end up trying to use
the mingw headers for a host build.
The same goes for other variables as well, such as CPPFLAGS,
CPP, and GMPINC.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
MACHINE = qemuarm64
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7at-neon"
$ bitbake core-image-minimal -cpopulate_sdk
WARNING: gcc multilib setup is not supported for TARGET_ARCH=aarch64
WARNING: gcc multilib setup is not supported for TARGET_ARCH=aarch64
[YOCTO #8638]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The tests in flex test-bison-yylval and test-bison-yylloc
failed, so we backport a patch from upstream to fix it.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
No change in License. Updated no-static-link.patch
README.rst: license checksum changed to reflect the Copyright update
COPYING-MIT: checksum changed to reflect the Copyright update
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Here is the way to reproduce the issue:
...
root@localhost:~# perl -e "use Errno qw(ENOENT);"
"ENOENT" is not exported by the Errno module
Can't continue after import errors at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
...
For some distros, there was extra spaces in the
brackets while using CC version:
For Windriver:
$CC --version
x86_64-wrs-linux-gcc (Wind River Linux 5.2.0-8.0-intel-x86-64) 5.2.0
For Ubuntu:
$ gcc --version
gcc (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
So we replace the contects between brackets with semicolon
and then use space to split.
[YOCTO #8367]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We have 5.2 and 4.9, we don't really need 4.8 now and it can be moved
out to other layers if anyone still wants/needs it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We need these to be consistent so they are possible to programmatically
read.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We only have a short description, so set SUMMARY and DESCRIPTION
will be defaulted from it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We only have a short description, so set SUMMARY and DESCRIPTION
will be defaulted from it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the following issues:
IA32 / ARM - Resync to glibc-2.22, fix a mismatch w/ glibc's ld.so
MIPS - Ignore the new SHT_MIPS_ABIFLAGS
ARM - Fix missing ARM IFUNC support chunk
Also upstream prelink project no longer has a 'trunk' directory.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The gcc default, bss-plt, will cause errors when using the prelinker. All
other distributions that I am aware of are using the the secure-plt. For an
explanation of the differences, the gcc docs:
Current PowerPC GCC accepts a `-msecure-plt' option that generates code
capable of using a newer PLT and GOT layout that has the security
advantage of no executable section ever needing to be writable and no
writable section ever being executable. PowerPC ld will generate this
layout, including stubs to access the PLT, if all input files (including
startup and static libraries) were compiled with `-msecure-plt'.
`--bss-plt' forces the old BSS PLT (and GOT layout) which can give
slightly better performance.
The security of the new PLT and ability to run the prelinker outweigh
any performance penalty.
The secure-plt is enabled by default. The old bss-plt can be enabled by
selecting 'bssplt' in the DISTRO_FEATURES.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This release is just security fixes:
- CVE-2015-5225
- CVE-2015-6815
- CVE-2015-5278
- CVE-2015-5279
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- remove mips64 and mips64el from softmmuonly list
to enable user mode, they have been supported
since 2012.
- keep the softmmuonly list and for loop although
there is only one for now in case more supported
arches added.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
EM_AARCH64 maybe not be defined due to old version elf.h when compile
rpm-native, and lead to that debugedit can not work on aarch64 elf object
files, since there is no other dependence, except these two macro,
define them to make debugedit work on aarch64 elf files.
debugedit: /bitbake_build/tmp/work/aarch64-wrs-linux/libvirt/1.2.19-r0/
package/usr/lib64/libvirt/ptest/daemon/libvirtd_admin_la-admin_server.o:
Unhandled relocation 258 in .debug_info section
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove obsolete hack which seems to date back to (at least) 2009. It's
potentially harmful as python TARGET_CC_ARCH flags can leak through to
other packages via the sysroot _sysconfigdata.py.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use the value 0x00000080 for INSN_XLP, as the value 0x00000040 has already
been assigned to INSN_OCTEON3 by the binutils project.
Without this change, invalid instructions can be generated for both INSN_XLP
and INSN_OCTEON3.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The structure has apparently changed, and there was a missing
setting. This corrects a segfault when disassembling code.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch corrects the path specifications when building perl
for vendorlib, vendorarch, sitelib and sitearch to allow newer
dual-life module being installed on host to satisfy configure
and build requirements of some CPAN distributions.
Additionally, fix search path order in perl wrappers.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|