Age | Commit message (Collapse) | Author | Files |
|
[Yocto #7453]
Corrects the original commit for the patch that removed ARM ptest CFLAGS
settings. Since the flags could be set by a user, the flags should
be kept in place during compilation. By keeping the original up-stream
CFLAGS for the tests, then additional tests successfully compile
for all tested ARM tunings.
However, there were still two tests listed below that did not compile
for any beaglebone tuning that is valid for valgrind. With the updated
patch, the set of excluded ARM ptests and their respective build
failures are:
intdiv - fails for all beaglebone tunings with 2 errors:
{standard input}:(40 or 41): Error: selected processor does not
support Thumb mode `udiv r3,r9,r10'
{standard input}:(72 or 73): Error: selected processor does not
support Thumb mode `sdiv r3,r9,r10'
vcvt_fixed_float_VFP - fails for all beaglebone tunings in one of
two ways:
with neon tuning (-mfpu=neon) fails with Internal Compiler Error
without neon tuning fails with 3 errors:
{standard input}:33: Error: selected FPU does not support
instruction -- `vcvt.f32.s32 s15,s15,#1'
{standard input}:58: Error: selected FPU does not support
instruction -- `vcvt.f32.s32 s15,s15,#32'
{standard input}:136: Error: selected FPU does not support
instruction -- `vcvt.f32.u32 s15,s15,#1'
After applying this commit, the valgrind ARM ptests compile without
errors for tunings:
armv7[t][hf][b][-neon] cortexa8[t][hf][-neon]
where the tuning [option] was successfully compiled, both with
and without the 'option', and in combination with all other options.
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* it's useful for debugging corrupt squashfs images from mksquashfs
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade vala from version 0.26.1 to 0.28.0.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
GStreamer 1.0 python bindings are gobject-introspection based,
so until that is fixed, they will not be available.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=6294
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of letting configure find the host's perl and then use a complicated sed
to replace it at install time, simply pre-seed the configure logic with the path
we want to use.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of letting configure find the host's perl and then use a complicated sed
to replace it at install time, simply pre-seed the configure logic with the path
we want to use.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modifies:
python3-native_3.4.2.bb -> python3-native_3.4.3.bb: Updates checksums, LICENSE did not change,
dates were updated.
python3_3.4.2.bb -> python3_3.4.3.bb: Updates checksums, LICENSE did not change,
dates were updated.
generate-manifest-3.4.py: fixes asyncio and net-tools.
python-3.4-manifest.inc: fixes asyncio and net-tools.
This upgrade contains a fix for CVE-2014-9365.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
net.c:65:34: fatal error: bluetooth/bluetooth.h: No such file or directory
# include <bluetooth/bluetooth.h>
^
compilation terminated.
And use "??=" rather than "?=" for PACKAGECONFIG.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
gcc-5.1.0: gcc: Files/directories were installed but not shipped in any package:
/usr/bin/i586-poky-linux-gcov-tool
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The virtclass-native is out of date.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable the test "Test against HP-UX 11.11 bug: No converter from EUC-JP
to UTF-8 is provided" since we don't support HP-UX and if the euc-jp is
not installed on the host, the dependence will be built without iconv
support and will cause guild-native building fail.
The patch is similar as 0470bd7a9658d3[libunistring: remove the test to
convert euc-jp in configure]
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, g++/c++ compilation doesn't work on target due to missing
header files. Automated sanity tests fail. Add back the gcc4 patch to
address this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes compile issues on powerpc with gcc 5 which show up with
errors like:
| make[2]: Entering directory '/media/build1/poky/build/tmp/work/ppc7400-poky-linux/xprop/1_1.2.2-r0/build'
| powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/media/build1/poky/build/tmp/sysroots/qemuppc -Wall -Wpointer-arith -Wmissing-declarations -Wformat=2 -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Wbad-function-cast -Wold-style-definition -Wdeclaration-after-statement -Wunused -Wuninitialized -Wshadow -Wmissing-noreturn -Wmissing-format-attribute -Wredundant-decls -Wlogical-op -Werror=implicit -Werror=nonnull -Werror=init-self -Werror=main -Werror=missing-braces -Werror=sequence-point -Werror=return-type -Werror=trigraphs -Werror=array-bounds -Werror=write-strings -Werror=address -Werror=int-to-pointer-cast -Werror=pointer-to-int-cast -fno-strict-aliasing -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xprop dsimple.o clientwin.o xprop.o -lX11
| /media/build1/poky/build/tmp/sysroots/qemuppc/usr/lib/../lib/libX11.so: undefined reference to `.LCL2'
| collect2: error: ld returned 1 exit status
[YOCTO #7721]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove insserv from OE-Core. It did have uses but we've optimised the sysvinit
scripts as needed and there are other directions init systems are moving now.
It no longer belongs in the core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change-Id: I54dc82a569f02d489137d88f16d6b768c4ab779b
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop backports obviously
additionally drop local patches around
parallel compilation since it got reworked upstream
To select set
GCCVERSION = "5.1%"
SDKGCCVERSION = "5.1%"
in local.conf
Change-Id: Icdfa61017a617244128f361b022e7c8f1f9e0610
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a patch to fix CVE-2015-1572
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-1572
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu-Arm-versatilepb-Add-memory-size-checking.patch
brought up to date;
37ed3bf1ee07bb1a26adca0df8718f601f231c0b.patch removed,
integrated upstream;
glx enable config option changed to opengl enable,
update accordingly.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As Python-3.4 pip is required and installed by default, pips installation
is bootstrapped using python wheels, this makes it complicated to patch,
by default the installation uses an absolute path to /tmp, on most cases
this would not be a problem, but since on the Autobuilders several Python
installations (for different archs) may be happening at the same time,
this shared resource utilization results in errors at do_install(), this
patch disables pip installation by default for now, until we have a
python3-pip package which we can easily patch in these situations.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As Python-3.4 pip is required and installed by default, pips installation
is bootstrapped using python wheels, this makes it complicated to patch
and causes errors on the Autobuilders, since we don't need pip for
python3-native, this disables it fixing the issues.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When installing python3-native sometimes pips default build
directory (which is on the host and is user dependant) is left unclean,
due to this, when python3-core is being installed it tries to use
the same directory producing an error, this explicitly removes
what the previous installation might have left behind, fixing the issue.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python-cryptography requires fractions module which is currently unpackaged.
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modifies:
python3-native_3.3.3.bb -> python3-native_3.4.2.bb: Updates checksums, version, patches
and SRC_URIs to use xz format, LICENSE did not change, dates were updated, adds fix for
ctypes/libffi needed for pip <- required since Python 3.4 (see PEP #453).
python3_3.3.3.bb -> python3_3.4.2.bb: Updates checksums, version, patches and SRC_URIs
to use xz format, adds fix for ctypes/libffi, fixes oe_multilib_header() call,
adds python3-core as RDEPENDS to python3-misc to avoid QA issue.
generate-manifest-3.4.py - > generate-manifest-3.4.py: fixes reprlib,
adds _sitebuiltins and _collections_abc <- formerly part of collections, separated since 3.4
python-3.3-manifest.inc -> python-3.4-manifest.inc
Rebases:
12-distutils-prefix-is-inside-staging-area.patch
python-3.3-multilib.patch
04-default-is-optimized.patch
avoid-ncursesw-include-path.patch
Deletes (fixed upstream):
fix-ast.h-dependency.patch
python3-fix-build-error-with-Readline-6.3.patch
06-ctypes-libffi-fix-configure.patch
remove_sqlite_rpath.patch
[YOCTO #6857]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
|
|
There was a stupid logic error controlling the diagnostic for
a "possible" mismatch involving trailing slashes and whether or
not a node was believed to be a directory. Specifically, a diagnostic
got printed any time a lookup for a directory *didn't* have a
trailing slash, as well as in the (actually intended) case where
a non-directory lookup *did*.
No other changes, but that one is probably significant.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* install populate-extfs.sh from contrib, be aware that in order
to use it you need to set DEBUGFS shell variable, otherwise it will
try to use debugfs from relative path which is almost always
incorrect:
CONTRIB_DIR=$(dirname $(readlink -f $0))
DEBUGFS="$CONTRIB_DIR/../debugfs/debugfs"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removing the 1.6.X recipes, since there is a new version 1.8.X recipes,
and hope that all projects already upgraded their premirror caches to
use new format
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Directory traversal vulnerability in the read_long_names function in
libelf/elf_begin.c in elfutils 0.152 and 0.161 allows remote attackers
to write to arbitrary files to the root directory via a / (slash) in a
crafted archive, as demonstrated using the ar program.
https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-9447
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
rm -f src/yacc src/yacc.tmp
echo '#! /bin/sh' >src/yacc.tmp
/bin/bash: src/yacc.tmp: No such file or directory
Makefile:6670: recipe for target 'src/yacc' failed
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
upgrade to fix two CVE defects: CVE-2014-8625 and CVE-2015-0840
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-8625
Multiple format string vulnerabilities in the parse_error_msg
function in parsehelp.c in dpkg before 1.17.22 allow remote attackers
to cause a denial of service (crash) and possibly execute arbitrary
code via format string specifiers in the (1) package or (2)
architecture name.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-0840
The dpkg-source command in Debian dpkg before 1.16.16 and 1.17.x before
1.17.25 allows remote attackers to bypass signature verification
via a crafted Debian source control file (.dsc).
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch fixes a warning seen with gcc 4.8 (especially on ubuntu 13.10)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is aready in the source.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed:
- unbreak-assumptions.diff
This patch changs the dir to /non-existant-dir, the source code has
changed the dir to /deadir, so it is not needed any more.
- trycompile.diff
There is no try_compile or try_run in numpy/core/setup.py any more, so
assumed that it is not needed.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In an effort to clean up some of the license handling, correctly set the
LICENSE of libgcc-initial to be the same as libgcc which has a GPLv3
exception.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This means you can have one gcc version for some gcc recipes
(e.g. crosssdk/nativesdk) and another gcc version for target code.
Also remove the preferred version entry from the default toolchains
list since the version issue is now handled automatically.
We also need to specifically handle gcc-source in the license handling
code since expanding ${PV} in the base class isn't possible. Since
gcc-source doesn't generate any packages directly this shouldn't be
an issue and whitelisting in this way is easiest (and matches the
rest of the toolchain handling).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rsync 3.1.1 allows remote attackers to write to arbitrary files via a symlink
attack on a file in the synchronization path.
Backport Complain-if-an-inc-recursive-path-is-not-right-for-i.patch to fix it
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
upgrade to fix two CVE defects: CVE-2015-0248 and CVE-2015-0251
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Kill 2 bugs with one patch
| insserv.c:997:5: note: each undeclared identifier is reported only
once for each function it appears in
| insserv.c:997:15: error: expected ';' before 'char'
| extension char buf[strlen(myname)+2+strlen(fmt)+1];
| ^
| insserv.c: In function 'main':
| insserv.c:2379:5: error: 'extension' undeclared (first use in this
function)
| extension char * argr[argc];
| ^
| insserv.c:2379:15: error: expected ';' before 'char'
| extension char * argr[argc];
| ^
| insserv.c:2401:2: error: 'argr' undeclared (first use in this
function)
| argr[c] = (char*)0;
| ^
Change-Id: I36b7fb9e8baeda5a7cc252da10c0527401248226
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
0.28 was released 2 years ago and bunch of patches
have gone in since. The commit rate is quite low
so its not a lot of churn to use. We have backports
for few bugs that are removed. Git version of recipe is removed too
since its no longer needed
Change-Id: I4b57db15320c76b1de5d26a733e60436663ff34a
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
see https://gcc.gnu.org/gcc-5/porting_to.html
we need to stop the preprocessor from generating the #line directives
or we run into issues like
| checking for apr_int64_t Python/C API format string...
| configure: error: failed to recognize APR_INT64_T_FMT on this platform
| Configure failed. The contents of all config.log files follows to aid
debugging
| ERROR: oe_runconf failed
Rightly subversion should be fixed but lets leave that to subversion
folks
Change-Id: I02a89798ff949f79967ab0a73adcddaa4218662d
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using PERLHOSTLIB as possible, which is same as
${STAGING_LIBDIR_NATIVE}/perl-native/perl/${@get_perl_version(d)}
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mtd-utils-fix-corrupt-cleanmarker-with-flash_erase--j-command.patch
We still need it, so update and enable it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When compiling meta-toolchain-qt5 on cortexa8, the compiler throws an
internal compiler error:
...
qttools-opensource-src-5.3.2/src/linguist/shared/po.cpp:
In function 'bool loadPO(Translator&, QIODevice&, ConversionData&)':
qttools-opensource-src-5.3.2/src/linguist/shared/po.cpp:717:1:
internal compiler error: in add_stores, at var-tracking.c:6000
...
Tracking this down led to https://bugs.linaro.org/show_bug.cgi?id=534
It seems the bug is well know and fixed upstream. So backporting from
trunk seems to be the right solution. This fixes the compiler problem
on cortexa8 and does not seem to be very invasive. The original commit
can be found at:
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@212178 138bc75d-0d04-0410-961f-82ee72b054a4
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix build error when no help2man on the host:
tmp/work/x86_64-linux/bison-native/3.0.4-r0/bison-3.0.4/build-aux/missing: line 81: help2man: command not found
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should be only one dev and dbg package.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should be only one dev and dbg package.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Based on Chong Lu's previous upgrade to 3.0.2
* Remove unneeded patches:
dont-depend-on-help2man.patch and
fix_cross_manpage_building.patch
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The LIC_FILES_CHKSUM has been changed since 2 extra spaces in the end
were moved.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is same gnulib fix replicated across needed recipes
Change-Id: I756713407111a726eae98e26c9c1ff64981371c0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|