summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools
AgeCommit message (Collapse)AuthorFiles
2013-04-02remake: Fix out of tree buildsRichard Purdie1
remake fails with errors during configure due to the out of tree build changes. This ensures the configure commands run correctly on files in ${S}. [YOCTO #4139] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-02rpm: Ensure rpm depends on rpm-postinstsRichard Purdie1
If package-management isn't in IMAGE_FEATURES, the postinstall handler wasn't being installed. rpm needs to depend on this to ensure it does get installed. [YOCTO #4160] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29elfutils: remove i386_dis.h/x86_64_dis.h compilation targetsLaurentiu Palcu1
Since we provide those files manually (i386_gendis, which is needed for generating those files, has to be run on host and would fail when compiling for other architectures), the mentioned compilation targets in libcpu/ are not needed anymore. This change will avoid a nasty race condition when running "make -jX install" resulting in a zero size libebl_i386.so file. The issue happens because, at "make install" time, the *_dis.h prerequisites will be newer than the target itself, triggering a chain of recompilations while, in the same time, the binary files are copied to the destination directory. Hence, the zero sized file... [YOCTO #4131] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29dosfstools: really compile supporting large filesJoe Slater1
Makefile in the package tries to set _FILE_OFFSET_BITS=64, but we clobber that with our CFLAGS, so we add it in the recipe. [CQID: 409915] Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-29rpm: split out run-postinstsZhenhua Luo1
1. Split out run-postinsts script into separated package, sometimes only the postinsts script is required to run all postinsts scripts in /etc/rpm-postinsts/ instead of the whole rpm package. 2. Set ROOTFS_PKGMANAGE_BOOTSTRAP to rpm-postinsts Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-27qemu: Add missing DEPENDS on dtcRichard Purdie1
This fixes failures in builds where qemu fails with: i586-poky-linux/qemu/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:20: fatal error: libfdt.h: No such file or directory x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.7.2/ld: cannot find -lfdt Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-26binutils: Don't generate .PPC.EMB.apuinfo sections for 64-bit outputKhem Raj2
This can cause issues building ppc64/eabi kernel. For details see the patch header Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-26rpm: Fix debugedit buildid processingMark Hatle1
[ YOCTO #4089 ] When constructing a new buildid, the items being hashed need to be returned to their native endian. In the process we were munging the sh_type field that we relied on to determine if a section was loadable or not. The patch avoids this behavior by only modifying a copy of the local endian data. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-26opkg-utils: Update to newer git rev for bashism fixRichard Purdie1
On systems with dash as /bin/sh there were failures in do_package_write_ipk due to bashisms in opkg-build. This newer revision contains a fix for this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-25docbook-utils-native: Unbreak the build after source and build dir splitKhem Raj1
docbook-utils-native started to install frontends and backends in wrong locations after this change. The absolute build and source directories were being created in install locations and the recipes using docbook-utils-native were complaining like dbus-java is saying | jw: There is no frontend called "/b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/frontends/docbook". | make: *** [CreateInterface.1] Error 2 | ERROR: oe_runmake failed Rightly so because now they are installed under /b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/b/kraj/jlinux-next/poky/build/tmp-eglibc/work/x86_64-linux/docbook-utils-native/0.6.14-r3/ This patch fixes the install to be like it was but consider the build and sourcedir split. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-25rpm: Add workaround for debugedit-segvMark Hatle2
[ YOCTO #4089 ] On PPC and MIPS, there appears to be a condition that causes debugedit to segfault. The segfault is related to a call into the md5hash algorithm, an address of '0', and a size > 0 is passed causing the access of the address to segv. This workaround may prove to be the final fix, but it's currently unclear what the actual cause of the 0 address is. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-23tcl: Fix the location of the installed headersMark Hatle1
Having '${S}' in the for loop was causing the headers to be installed into the wrong location. Move the 'S' to the install line. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-23valgrind: Fix out of tree buildsRichard Purdie2
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22perl: remove the duplicated RDEPENDSRobert Yang1
Remove a duplicated line: RDEPENDS_${PN}-module-cpanplus += "${PN}-module-load" [YOCTO #4064] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22perl-native: remove duplicated LIC_FILES_CHKSUMRobert Yang1
Remove duplicated LIC_FILES_CHKSUM: LIC_FILES_CHKSUM = "file://Copying;md5=2b4c6ffbcfcbdee469f02565f253d81a \ file://Artistic;md5=f921793d03cc6d63ec4b15e9be8fd3f8" [YOCTO #4064] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22perl: avoid splitting out .debug directories as packagesPaul Eggleton1
The recursive parameter is set to True, the regex for the first call to do_split_packages matches any path under ${libdir}/perl/${PV}/auto/, and the .debug directories contain .so files, so each one was getting picked up as a package. Change the regex to disallow dots in the path beneath auto/ and thus avoid the .debug directories. Fixes [YOCTO #4048]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22apt: Fix case where ${B} != ${S}Richard Purdie3
Need to reference objects from ${B}. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-21rpm: Fix case where ${B} != ${S}Richard Purdie1
We need to run autogen.sh in the correct directory (${S}). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-21python-pygtk: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by adding missing path component. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-21dpkg: Fix case where ${B} != ${S}Richard Purdie1
Add missing path component to make out of tree builds work. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-19python: fix on-target use of distutils/setuptools by removing references to ↵Koen Kooi1
buildpaths Running 'python setup.py build' would fail due to the python Makefile having CC= i586-angstrom-linux-gcc -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2 CXX= i586-angstrom-linux-g++ -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2 '--with-libtool-sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2' And more Multiple users have reported this problem: http://hipstercircuits.com/?p=499 http://www.gigamegablog.com/2012/09/09/beaglebone-coding-101-spi-output/ Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18tcltk: Fix for ${B} != ${S}Richard Purdie1
This change allows ${B} != ${S} builds to work since otherwise gnu-configise is executed in the wrong places and various source paths aren't correct. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18distcc: Fix case where ${B} != ${S}Richard Purdie2
Add patch to fix out of tree build failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18diffstat: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by fixing cwd assumptions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18nasm: Fix case where ${B} != ${S} (partial)Richard Purdie1
Fix out of tree build by fixing cwd assumptions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18e2fsprogs: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by placing built objects in the correct location. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18docbook-utils-native: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by using full paths to source and built objects as appropriate. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18chrpath: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds for the native case by using the correct path to the built object. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18rpm: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by removing assumptions about cwd and using full paths to files in ${S}. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18rsync: Fix case where ${B} != ${S}Richard Purdie1
Allow out of tree builds to work by removing assumptions about cwd. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18valgrind: Fix case where ${B} != ${S}Richard Purdie1
Fix out of tree builds by referring to the build object in ${B}. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18bison: Use PATH to locate m4Richard Purdie1
We can specify no path to m4 at configure time and thus avoiding having a wrapper for that particular problem. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-18gcc-common: Exclude AVAILTUNES from sstate checksumsRichard Purdie1
AVAILTUNES is only used as a sanity check, we don't need to include it in the sstate checksum in this case. If included it can cause problems when switching machines with a common package architecture. [YOCTO #3667] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-16gcc-cross-canadian: do not create symlinks to non-existent binariesLaurentiu Palcu1
If fortran is not built, soft links to gfortran and g77 are created even though the fortran compiler doesn't exist... [YOCTO #4023] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-16elfutils: fix the num passed to memset in ar.cZhenhua Luo2
Following build error will appear on Fedora18+: ar.c: In function 'do_oper_delete': ar.c:918:31: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess] memset (found, '\0', sizeof (found)); Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-16python-imaging: fix PN -> BPN in do_install for multilibsJackie Huang1
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-15elfutils: Fix size passed to snprintf for invalid sh_name caseZhenhua Luo2
Following build error will appear on Fedora18. nm.c: In function 'show_symbols_sysv': nm.c:756:27: error: argument to 'sizeof' in 'snprintf' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] snprintf (name, sizeof name, "[invalid sh_name %#" PRIx32 "]", ^ Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-15binutils: fix ineffectual zero of cache and array bounds issueZhenhua Luo4
binutils build fails on Fedora18+: 1. binutils-2.23.1/bfd/elf32-xtensa.c:6078:36: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess] memset (sec_cache, 0, sizeof (sec_cache)); ^ 2. binutils-2.23.1/bfd/elf32-xtensa.c:6120:32: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess] memset (sec_cache, 0, sizeof (sec_cache)); ^ 3. binutils-2.23.1/opcodes/arc-dis.c:430:13: error: argument to 'sizeof' in '__builtin_strncat' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] sizeof (state->commentBuffer)); ^ 4. binutils-2.23.1/opcodes/rl78-dis.c:230:13: error: array subscript is above array bounds [-Werror=array-bounds] if (oper->use_es && indirect_type (oper->type)) ^ Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-15qemu-native:fix do_compile failed on SLED 11.2Hongxu Jia2
1, When build qemu-native on SLED 11.2, there is an error: ... | In file included from /usr/include/bits/sigcontext.h:28, | from /usr/include/signal.h:339, | from /buildarea2/tmp/work/i686-linux/qemu-native/1.4.0-r0/ qemu-1.4.0/include/qemu-common.h:42, | from fsdev/virtfs-proxy-helper.c:23: | /usr/include/asm/sigcontext.h:28: error: expected specifier- qualifier-list before '__u64' | /usr/include/asm/sigcontext.h:191: error: expected specifier- qualifier-list before '__u64' ... 2, The virtfs-proxy-helper.c includes <sys/capability.h> and qemu-common.h in sequence. The header include map is: (`-->' presents `include') ... "virtfs-proxy-helper.c" --> <sys/capability.h> ... "virtfs-proxy-helper.c" --> "qemu-common.h" --> <signal.h> --> <bits/sigcontext.h> --> <asm/sigcontext.h> --> <linux/types.h> --> <asm/types.h> --> <asm-generic/types.h> --> <asm-generic/int-ll64.h> ... 3, The bug is found on SLED 11.2 x86. In libcap header file /usr/include/sys/capability.h, it does evil stuff like this: ... 25 /* 26 * Make sure we can be included from userland by preventing 27 * capability.h from including other kernel headers 28 */ 29 #define _LINUX_TYPES_H 30 #define _LINUX_FS_H 31 #define __LINUX_COMPILER_H 32 #define __user 33 34 typedef unsigned int __u32; 35 typedef __u32 __le32; ... This completely prevents including /usr/include/linux/types.h. The above `<asm/sigcontext.h> --> <linux/types.h>' is prevented, and '__u64' is defined in <asm-generic/int-ll64.h>. 4, Modify virtfs-proxy-helper.c to include <sys/capability.h> last to workaround the issue. http://www.linuxtv.org/pipermail/vdr/2009-August/021194.html http://patchwork.linuxtv.org/patch/12748/ [YOCTO #4001] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-12gcc-4.7: Fix incorrect warning with -Wcast-qualKhem Raj2
This patch backport the fix where -Wcast-qual reports a bogus warning with 4.7.2, There is no workaround in code that can be done to avoid it hence the fix to gcc is backported. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-12dpkg depends on ncursesAlexandru DAMIAN1
Dpkg compilation depends on the ncurses, so add this dependency. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-09apt-native: fix checksumsConstantin Musca1
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-09strace: fix kernel release string parsingAndreas Oberritter2
* Strace just aborts with two-digit kernel versions (e.g. 3.0-foo). Backport a patch from strace Git. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-09adt-installer: remove patches and .pc directories from the shipped tarballLaurentiu Palcu1
The patches and .pc directories should not be shipped since the patches were already applied. So, remove these 2 directories. [YOCTO #3983] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-07rpm: save output of postinstall scripts when image first bootKang Kai1
When image feature "debug-tweaks" is enabled, save output of post install script to log file which can be configured when image first boot. [YOCTO #3223] Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-07dpkg: save output of postinstall scripts when image firstbootKang Kai1
When image feature "debug-tweaks" enabled, save output of postinstall scripts to log file /var/log/postinstall.log when image first boot. And the log file can be configured. It also needs image feature "package-management" enabled. If not, package run-postinsts will be installed and then all packages will be configured by it. Command 'dpkg --configure' outputs nothing. [YOCTO #3223] Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-07opkg: save output of postinst scripts when image first bootKang Kai1
When image feature "debug-tweaks" enabled, save output of postinstall scripts to log file /var/log/postinstall.log when image first boot. And the log file can be configured. It also needs image feature "package-management" enabled. If not, package run-postinsts will be installed and then all packages will be configured by it. Command 'opkg configure' outputs nothing. [YOCTO #3223] Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-05git: updated to 1.8.1.4Bogdan Marinescu1
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-05qemu: Upgrade to 1.4.0 releaseKhem Raj4
Tested qemu on x86-64 target and qemu-native no obvious problems seen in testing Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-05apt: upgrade to 0.9.7.7Constantin Musca24
bb files: remove invalid config.sub/config.guess files (autotools will generate the correct files) allocate-larger-memory.patch: not needed anymore fix-gcc-4.6-null-not-defined.patch: added - include header that defines NULL includes-fix.patch: not needed anymore localefixes.patch: removed - not necessary anymore (no compiling errors) makerace.patch: adapted to the new version no-ko-translation.patch: adapted to the new version no-nls-dpkg.patch: added - fix build without nls noconfigure.patch: adapted to the new version nodoc.patch: adapted to the new version (apply patch on all cases because the doc generation needs docbook-xsl) remove-redeclaration.patch: not needed anymore truncate-filename.patch: moved use-host.patch: adapted to the new version no-curl.patch: adapted to the new version disable-configure-in-makefile.patch: added - do not run configure at do_compile Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-17 23:08:08 +0000