summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/python
AgeCommit message (Collapse)AuthorFiles
2011-06-23python: Add python to the dependency to pygobjectMark Hatle1
pygobject requires both python and pygobject-native for compilation. Without python pygobject may fail to compile.. and items that depend on pygobject will fail to compile. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23python: Switch to using the default -dbg packageMark Hatle3
Python was missing a lot of debug information. Switch to use the default -dbg package. Also add some additional debug information to the -dbg package. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23python-pyobject: Remove unnecessary -dbg settingMark Hatle1
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23python-gst: Add missing files to the -dbg packageMark Hatle1
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-05-27License Field Cleanup: Non-standard field namesBeth Flanagan2
I've cleaned up some odd license fields, fixed some license names and corrected some incorrect licenses. LICENSE really needs a pass through by the maintainers as some of the licensing is incorrect. Also, every license with Artistic should be gone through and noted as which version of Artistic. Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
2011-05-25python-2.6.6: py_package_preprocess should change Makefile only in PKGD not DMartin Jansa1
* PACKAGEFUNCS ?= "perform_packagecopy \ ${PACKAGE_PREPROCESS_FUNCS} \ our py_package_preprocess is called after perform_packagecopy which does copy D to PKGD so we change it to target version in D (image/) before populating sysroot (sysroot-destdir/) while keeping Makefile.sysroot version in PKGD which was created before calling py_package_preprocess, so both package for runtime and sysroot end wrong * I haven't seen this problem on faster builder, I guess because do_package and do_populate_sysroot can run in paralell and I was lucky that do_populate_sysroot finished before py_package_preprocess was started, but if you build python step by step -c package first you should see it every time * here is proof that with PKGD it works better: $ bitbake -c cleanall python $ bitbake -c install python $ grep LIBDIR= \ ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \ ./package/usr/lib/python2.6/config/Makefile \ ./sysroot-destdir/usr/lib/python2.6/config/Makefile \ ./image/usr/lib/python2.6/config/Makefile \ ./Python-2.6.6/Makefile \ ~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile grep: ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile: No such file or directory grep: ./package/usr/lib/python2.6/config/Makefile: No such file or directory grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory ./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./Python-2.6.6/Makefile:LIBDIR= /usr/lib /OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib $ bitbake -c package python $ grep LIBDIR= \ ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \ ./package/usr/lib/python2.6/config/Makefile \ ./sysroot-destdir/usr/lib/python2.6/config/Makefile \ ./image/usr/lib/python2.6/config/Makefile \ ./Python-2.6.6/Makefile \ ~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib ./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory ./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./Python-2.6.6/Makefile:LIBDIR= /usr/lib /OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib $ bitbake -c package python $ grep LIBDIR= \ ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \ ./package/usr/lib/python2.6/config/Makefile \ ./sysroot-destdir/usr/lib/python2.6/config/Makefile \ ./image/usr/lib/python2.6/config/Makefile \ ./Python-2.6.6/Makefile \ ~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib ./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib ./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./Python-2.6.6/Makefile:LIBDIR= /usr/lib /OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib * without this patch we have /usr/lib/ in image/sysroot-destdir and SYSROOT_LIBDIR in package/packages-split $ grep LIBDIR= \ ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \ ./package/usr/lib/python2.6/config/Makefile \ ./sysroot-destdir/usr/lib/python2.6/config/Makefile \ ./image/usr/lib/python2.6/config/Makefile \ ./Python-2.6.6/Makefile \ ~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./package/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib ./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib ./image/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib ./Python-2.6.6/Makefile:LIBDIR= /usr/lib /OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-23python-pygpbject: upgrade from 2.27 to 2.27.91Nitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-05-18gcc: remove unused patches and move patches in proper dirNitin A Kamble6
gcc: update upstream-status for patches python: update upstream-status for patches libtool: update upstream-status of patches m4: update upstream status for patches eglibc: remove unused patches eglibc: update upstream status of patches glibc: update upstream-status of patches & remove unused patches Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-05-13recipes: Update upstream-status of patchesNitin A Kamble10
python: update upstream-status for patches binutils: update upstream-status for patches gcc 4.5.1 4.6.0: update upstream-status for patches autoconf: update upstream-status for patches automake: update upstream-status for patches bison: update upstream-status for patches distcc: update upstream-status of patches fstests: update upstream-status for patches gdb: update upstream-status of patches intltool: update upstream-status of patches libtool: update upstream status of patches linux-libc-headers: update upstream-status for patches make: update upstream-status for patches perl: update upstream-status for patches python-pycurl: update upstream-status for patches python-pygobject: update upstream status for patches python-pyrex: update upstream-status for patches quilt: update upstream-status of patches tcl: update upstream-status for patches gnu-config: update upstream-status for patches gmp: update upstream-status for patches Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-05-12recipes: Add Upstream-Status to multiple recipesZhai Edwin3
gtk+: Add Upstream-Status ed: Add Upstream-Status gnome-common: Add Upstream-Status libmatchbox: Add Upstream-Status matchbox-wm: Add Upstream-Status x11vnc: Add Upstream-Status xtscal: Add Upstream-Status eds-dbus: Add Upstream-Status matchbox-desktop: Add Upstream-Status matchbox-keyboard: Add Upstream-Status matchbox-stroke: Add Upstream-Status matchbox-theme-sato: Add Upstream-Status owl-video-widget: Add Upstream-Status beecrypt: Add Upstream-Status gnome-icon-theme: Add Upstream-Status tslib: Add Upstream-Status libowl-av: Add Upstream-Status sato-icon-theme: Add Upstream-Status web-webkit: Add Upstream-Status metacity: Add Upstream-Status apr: Add Upstream-Status gdk-pixbuf: Add Upstream-Status pcmanfm: Add Upstream-Status gpgme: Add Upstream-Status eee-acpi-scripts: Add Upstream-Status libgalago: Add Upstream-Status python-pygtk: Add Upstream-Status gnome-mime-data: Add Upstream-Status clutter: Add Upstream-Status clutter-gtk: Add Upstream-Status tidy: Add Upstream-Status mutter: Add Upstream-Status xcursor-transparent-theme: Add Upstream-Status leafpad: Add Upstream-Status matchbox-config-gtk: Add Upstream-Status contacts: Add Upstream-Status dates: Add Upstream-Status web: Add Upstream-Status webkit: Add Upstream-Status - Also removed empty fix_im.patch apr-util: Add Upstream-Status libcroco: Add Upstream-Status liboil: Add Upstream-Status libxslt: Add Upstream-Status libglade: Add Upstream-Status gnome-terminal: Add Upstream-Status xev: Add Upstream-Status claws-mail: Add Upstream-Status clipboard-manager: Add Upstream-Status epdfview: Add Upstream-Status kf: Add Upstream-Status qemu: Add Upstream-Status clutter-gst: Add Upstream-Status table: Add Upstream-Status matchbox-panel-2: Add Upstream-Status Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
2011-05-11recipes: Fix the Upstream-Status formatNitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-05-11python-native: Add ctypes patch to native build (as in cross-compilation)Michael Lippautz1
This fix makes ctypes build for python-native which may be needed by extensions that utilize ctypes and use setuptools/distutils as their build system. Tested building pyudev for beagleboard target using Ângstrom distro. Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com>
2011-05-08python-imaging: update upstream status for patchesNitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-05-04python: Unbreak Python third-party extensionsMichael Lippautz1
This patch fixes compilation/linking of python third-party extensions, i.e. Extensions that ship with C code. Problem: Python uses distutils(-native) to compile third-party extensions. distutils uses its own sysconfig module to get the options for compiling and linking. Since third-party extensions have to be linked against this libpython it important that -L points into staging. This is not the case because distutils.sysconfig uses a special Makefile that is shipped with python determine the paths. The Makefile is the same that would be used on the target to build third-party extensions. It therefore points into /usr/lib instead of staging. Solution: Stage a modified version of the Makefile where the paths (incdir, libdir) have been replaced by ones that point into staging. Side-problem: The recipe actually should not stage files itself in do_compile, but rather handle everything that needs to be staged in do_install. This is currently not possible because python compiles itself using distutils-native. Distutils on the other hand does only allow to add a path, but not to substitute it, requiring a staged Makefile and libpython.so before the actual python compilation is triggered. The second step to solve this would be to either patch distutils, or split python into python-initial and python. The -initial part could create the Makefile and the library, while the main part focuses on the target. For further references see: http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/001752.html Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com> Acked-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-05-04logging: update existing oe* logging users to the bb* interfaceDarren Hart1
The new bash logging class provides bbnote, bbwarn, bbfatal, and bbdebug replacements (as well as bbplain and bberror) for the oe* equivalents. Use the new bb* API in preparation to delete the oe* logging API. This patch was automatically generated by a sed script. The result has been visually inspected and used to build core-image-sato for qemux86. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2011-04-28python: add missing cytpes modulesSaul Wold2
Contributed by Martin Jansa via OE Fixes [YOCTO #1003] Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-04-22python-pycairo: fix installation path of __init__.pyNitin A Kamble1
This fixes Bug [YOCTO #477] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-04-22python-gst: upgrade from 0.10.19 to 0.10.21Nitin A Kamble2
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-04-20Rename poky-lsb override to linuxstdbaseRichard Purdie2
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-04-04python-native: add missing SRC_URI hashesJoshua Lock1
Signed-off-by: Joshua Lock <josh@linux.intel.com>
2011-03-23Various: Switch to GNOME_MIRRORTom Rini1
Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-03-08python: add generate-manifest-2.6.py script and regen python-2.6-manifest.incMartin Jansa2
* imported from OE with sorted entries etc Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Acked-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-01-20python: Fix failures of LSB python-runtime tests.Jingdong Lu2
Fix failues of LSB python-runtime tests. test_largefile: add "ac_cv_sizeof_off_t=8" option explicitly into configure options in order to enable "LFS". test_codecs, test_re, test_unicode: "--with-wctype-functions" will cause these tests failed, so remove it for LSB. test_builtin, test_getargs: "sitecustomize.py" cause default encoding changed from "ascii" into "utf8" and it will cause these tests failed, so remove this file for LSB. Signed-off-by: Jingdong Lu<jingdong.lu@windriver.com>
2011-01-06python-dbus: upgrade from 0.83.1 to 0.83.2Nitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-12-31python-pygobject: Fix DEPENDS and RDEPENDS for native recipeRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-12-30RDEPENDS, RRECOMMENDS -> RDPEPENDS_${PN}, RRECOMMENDS_${PN}Koen Kooi7
For these recipes the dependencies listed in RDEPENDS and RRECOMMENDS only apply to ${PN} Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-12-23python: Add LIC_FILES_CHKSUMSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-12-23python-pygobject: remove older install of generate-constants and add ↵Saul Wold2
BBCLASSEXTEND Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-12-21python-pygobject: add --disable-introspectionSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-12-21python-pygobject: Fix SRC_URI checksumsSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-12-16python-pygobject: upgrade from 2.21.1 to 2.27.0Nitin A Kamble2
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-12-09SRC_URI Checksums AdditionalsSaul Wold10
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-12-02python-scons:Add license checksum and update the GPL informationMei Lei1
Add LICENSE.txt file checksum to bb file and update the "GPL" to "MIT" according to the License file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python-pyrex:Add license checksum and update the License informationMei Lei1
Add LICENSE.txt file checksum to bb file and update the "GPL" to "Apache License Version 2.0" according to the License file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python-pygtk:Add license checksum and update the GPL informationMei Lei1
Add COPYING file checksum to bb file and update the "LGPL" to "LGPLv2.1" according to the COPYING file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python-pygobject:Add license checksum and update the GPL informationMei Lei1
Add COPYING file checksum to bb file and update the "LGPL" to "LGPLv2.1" according to the COPYING file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python-imaging:Add license checksum to bb fileMei Lei1
Add README file checksum to bb file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python-dbus:Add license checksum to bb fileMei Lei1
Add LICENSE file checksum to bb file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-12-02python:Add license checksum to bb fileMei Lei1
Add LICENSE file checksum to bb file Signed-off-by: Mei Lei <lei.mei@intel.com>
2010-11-18libtool upgrade from 2.2.10 to 2.4Nitin A Kamble2
Taking out of this code from patch as the newer upstream code has fix, and this patch is not needed. cross-compile.patch: -Index: libtool-2.2.10/libltdl/config/ltmain.m4sh +Index: libtool-2.4/libltdl/config/ltmain.m4sh =================================================================== ---- libtool-2.2.10.orig/libltdl/config/ltmain.m4sh -+++ libtool-2.2.10/libltdl/config/ltmain.m4sh -@@ -5147,8 +5147,14 @@ func_mode_link () - absdir="$abs_ladir" - libdir="$abs_ladir" - else -- dir="$libdir" -- absdir="$libdir" -+ # Adding 'libdir' from the .la file to our library search paths -+ # breaks crosscompilation horribly. We cheat here and don't add -+ # it, instead adding the path where we found the .la. -CL -+ dir="$abs_ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ #dir="$libdir" -+ #absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-11-18python-gst: Fix the configure patch & add LIC_FILE_CHKSUMSaul Wold2
Fixed the acinclude.m4 patch for the py_prefix to correct a host contamination check Added LIC_FILE_CHKSUM for COPYING LICENSE Update Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-11-14python, python-native upgrade from 2.6.5 to 2.6.6Nitin A Kamble15
Removed these patch: python-native-2.6.5/00-fix-bindir-libdir-for-cross.patch python/00-fix-bindir-libdir-for-cross.patch The upstream code has changed, and it does not need the above 2 patches (fixes) anymore. Patches rebased to the newer code: python/01-use-proper-tools-for-cross-build.patch python/04-default-is-optimized.patch python/06-avoid_usr_lib_termcap_path_in_linking.patch python/99-ignore-optimization-flag.patch Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-11-14python-gst: upgrade from 0.10.18 to 0.10.19Nitin A Kamble1
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-11-10python: Fix hardcoded python references which should refer to PN, removing ↵Richard Purdie1
duplicate providers warning Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02python: Remove hardcoded python references and replace with PN, allowing use ↵Richard Purdie2
of BBCLASSEXTEND=nativesdk Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-11python: fix for host contamination issue while cross compilingNitin A Kamble3
This fixes [BUGID #385] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2010-10-01python-pygtk: Use correct paths at build timeJoshua Lock1
Fix the paths in configure.ac to use the target libraries and generators for building pygtk. Fix taken from OE. Thanks to Gary Thomas for providing a first stab at this. Signed-off-by: Joshua Lock <josh@linux.intel.com>
2010-10-01Python gst package needs pygtk at runtimeGary Thomas1
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Joshua Lock <josh@linux.intel.com>
2010-09-30Move prism-firmware, spectrum-fw, python-urlgrabber, python-iniparse and ↵Richard Purdie9
yum-metadata to meta-extras Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-08-27Major layout change to the packages directoryRichard Purdie52
Having one monolithic packages directory makes it hard to find things and is generally overwhelming. This commit splits it into several logical sections roughly based on function, recipes.txt gives more information about the classifications used. The opportunity is also used to switch from "packages" to "recipes" as used in OpenEmbedded as the term "packages" can be confusing to people and has many different meanings. Not all recipes have been classified yet, this is just a first pass at separating things out. Some packages are moved to meta-extras as they're no longer actively used or maintained. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-29 18:07:13 +0000