| Age | Commit message (Collapse) | Author | Files |
|---|
|
This patch is comparatively large and invasive. It does only do one thing, switching the
system to build using recipe specific sysroots and where changes could be isolated from it,
that has been done.
With the current single sysroot approach, its possible for software to find things which
aren't in their dependencies. This leads to a determinism problem and is a growing issue in
several of the market segments where OE makes sense. The way to solve this problem for OE is
to have seperate sysroots for each recipe and these will only contain the dependencies for
that recipe.
Its worth noting that this is not task specific sysroots and that OE's dependencies do vary
enormously by task. This did result in some implementation challenges. There is nothing stopping
the implementation of task specific sysroots at some later point based on this work but
that as deemed a bridge too far right now.
Implementation details:
* Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in
TMPDIR/sysroot-components/PACKAGE_ARCH/PN.
* WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files
from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and
RECIPE_SYSROOT_NATIVE.
* This construction is primarily done by a new do_prepare_recipe_sysroot task which runs
before do_configure and consists of a call to the extend_recipe_sysroot function.
* Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native
and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies
for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot
dependencies.
* We have to do a search/replace 'fixme' operation on the files installed into the sysroot to
change hardcoded paths into the correct ones. We create a fixmepath file in the component
directory which lists the files which need this operation.
* Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each
time a new loader is added. These are handled by adding files in bindir with the name
prefixed by "postinst-" and are run in each sysroot as its created if they're present.
This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them.
* Since a recipe can have multiple tasks and these tasks can run against each other at the same
time we have to have a lock when we perform write operations against the sysroot. We also have
to maintain manifests of what we install against a task checksum of the dependency. If the
checksum changes, we remove its files and then add the new ones.
* The autotools logic for filtering the view of m4 files is no longer needed (and was the model
for the way extend_recipe_sysroot works).
* For autotools, we used to build a combined m4 macros directory which had both the native and
target m4 files. We can no longer do this so we use the target sysroot as the default and add
the native sysroot as an extra backup include path. If we don't do this, we'd have to build
target pkg-config before we could built anything using pkg-config for example (ditto gettext).
Such dependencies would be painful so we haven't required that.
* PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy
for each machine. The paths therefore changed, the behaviour did not.
* The ccache class had to be reworked to function with rss.
* The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data
does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal
recipe name therefore remains a bad idea.
* The logic in insane needed tweaks to deal with the new path layout, as did the debug source
file extraction code in package.bbclass.
* The logic in sstate.bbclass had to be rewritten since it previously only performed search and
replace on extracted sstate and we now need this to happen even if the compiled path was
"correct". This in theory could cause a mild performance issue but since the sysroot data
was the main data that needed this and we'd have to do it there regardless with rss, I've opted
just to change the way the class for everything. The built output used to build the sstate output
is now retained and installed rather than deleted.
* The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold
up against testing. This has been rewritten too. There are some assumptions made about paths, we
save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is
here works but is a little hardcoded and an area for future improvement.
* In order to work with eSDK we need a way to build something that looks like the old style sysroot.
"bitbake build-sysroots" will construct such a sysroot based on everything in the components
directory that matches the current MACHINE. It will allow transition of external tools and can
built target or native variants or both. It also supports a clean task. I'd suggest not relying on
this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have
to have built that in a previous bitbake invocation.
* pseudo is run out of its components directory. This is fine as its statically linked.
* The hacks for wayland to see allarch dependencies in the multilib case are no longer needed
and can be dropped.
* wic needed more extensive changes to work with rss and the fixes are in a separate commit series
* Various oe-selftest tweaks were needed since tests did assume the location to binaries and the
combined sysroot in several cases.
* Most missing dependencies this work found have been sent out as separate patches as they were found
but a few tweaks are still included here.
* A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib
sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my
hand. That implementation can probably be neater but this is on the list of things to cleanup later
at this point.
In summary, the impact people will likely see after this change:
* Recipes may fail with missing dependencies, particularly native tools like gettext-native,
glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors
* Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst
* There was a separate patch series dealing with roots postinst native dependency issues. Any postinst
which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS.
There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest
and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean
we've found all the issues.
Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the
task logfiles, not the console so I've intentionally left this like that for now. We can turn it down
easily enough in due course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove 0002-Recognize-nios2-as-compilation-target.patch which is already
in the source.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove these patches which already in the source:
- libguile-VM-ASM_MUL-for-ARM-Add-earlyclobber.patch
- remove_strcase_l_funcs.patch
- 0001-libguile-Check-for-strtol_l-during-configure.patch
* Update 0002-Recognize-nios2-as-compilation-target.patch
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enforce the correct tag names across all of oe-core for consistency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add minor patch to recognize nios2 build target.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
strol_l is not available on musl
delete charset.alias as well its not needed
Use internal gc function on musl
We get errors on certain functions not being available in boeheme gc
when built with musl. Therefore use the internal versions
e.g.
Undefined gc_set_finalizer_notifier
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Remove redundant replacement of pkgconfig file and only modify the .pc
file which is installed in ${D}.
Replace /usr/bin with ${bindir} at same time.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
where it fails for qemuarm
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* fix the path for "define %pkg-config-program" in guile-config
* clean the --sysroot in guile-snarf
* add RDEPENDS on pkgconfig
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- This recipe is useful for more than just pulseaudio, so move it to
recipes-support.
- Rename to the correct upstream name, which corresponds to the library name.
Keep a PROVIDES of libatomics-ops for compatibility.
(From OE-Core rev: 5014de67fa6da1672626e3ec92fc51430fca3262)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just when building on host which doesnt have libunistring on host guile
fails the following configure test
| configure: error: GNU libunistring is required, please install it.
| Configure failed. The contents of all config.log files follows to aid
debugging
The reason is that its looking for libunistring dev files on build
system, so lets point the configure into target sysroot, similar issue
exist for libgmp, libltdl detection as well, fixed thusly
Get rid of trailing whitespaces while here
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
backport a patch to fix issue:
{standard input}: Assembler messages:
{standard input}:16966: rdhi, rdlo and rm must all be different
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
guile_cross_config() was using relative paths which mean it depends on exactly
what directory it starts in. To clarify the code, always use absolute paths.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
guile-2.0.11: guile: Files/directories were installed but not shipped
/usr/lib64/libguile-2.0*-gdb.scm [installed-vs-shipped]
This is because when there is no file in the directory:
for f in libguile-2.0*; do
[snip]
done
The f would be libguile-2.0* itself, use install-exec-hook will fix the
problem since it depends on install-libLTLIBRARIES.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
This reverts commit 397f27cdceaa4874d8d06aad10cd37a5817d90b8.
The fix isn't correct, caused:
install: cannot create regular file `/path/to/sysroots/x86_64-linux/usr/lib/libguile-2.0.so.22.7.2': File exists
will add a new fix.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Fixed:
guile-2.0.11: guile: Files/directories were installed but not shipped
/usr/lib64/libguile-2.0*-gdb.scm [installed-vs-shipped]
This is because when there is no file in the directory:
for f in libguile-2.0*; do
[snip]
done
The f would be libguile-2.0* itself, make sure the libs are installed
firstly will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add aarch64 endianness specification to scm file.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add:
MACHINE = "qemux86-64"
DEBUG_BUILD = "1"
to local.conf and there was a ssa corruption to build guile:
..
Unable to coalesce ssa_names 48 and 3476 which are marked as MUST COALESCE.
sp_48(ab) and sp_3476(ab)
guile-2.0.11/libguile/vm-engine.c: In function 'vm_debug_engine':
guile-2.0.11/libguile/vm.c:673:19: internal compiler error: SSA corruption
#define VM_NAME vm_debug_engine
^
guile-2.0.11/libguile/vm-engine.c:39:1: note: in expansion of macro 'VM_NAME'
VM_NAME (SCM vm, SCM program, SCM *argv, int nargs)
^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
...
Tweak libguile/vm-i-system.c to check the value of nshuf to workaround it.
The tweak didn't change previous logic.
[YOCTO #6411]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fixes floating dependency:
guile/guile/latest lost dependency on ncurses-libncurses readline
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade guile to 2.0.11 version and remove unneeded patch since
it's included in new version.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix the build error of autogen-native which depends on guile-native:
ysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ')' before '__attribute__'
sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:40:24: error: expected ',' or ';' before ')' token
sysroots/x86_64-linux/usr/include/guile/2.0/libguile/error.h:42:27: error: expected ')' before '__attribute__'
[YOCTO #5743]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The depenency on guild-native and libatomics-ops is missing
in multilib build, fix the depends with class-target.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
guile needs to be able to convert strings from ISO-8859-1 in order
to work properly. This patch adds a runtime dependency to the required
convert package, but only when glibc is used. The fix for uClibc depends
on another bug (#4530).
[YOCTO #4019]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the QA warning:
WARNING: guile: The compile log indicates that host include and/or library paths were used.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix_parallel_build_issue.patch is now part of upstream.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add explicit dependency for libpath.h on dynl.x which fixes a
potential parallel build issue.
[YOCTO #3558]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
change-install-data-hook-to-install-exec-hook-in-gui.patch is now
part of upstream.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When guile is installed from sstate, if the compiled files get a modified time
older than the source files then guile will produce warnings like this:
;;; note: source file /data/poky-master/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/boot-9.scm
;;; newer than compiled /data/poky-master/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/boot-9.go
Not staging the files and letting guile re-compile them on demand won't work:
;;; compiling /data/poky-master/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/system/base/compile.scm
;;; it seems /data/poky-master/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/system/base/compile.scm
;;; is part of the compiler; skipping auto-compilation
So, use a sstate postinst function to explicitly touch the compiled files after
the extraction to ensure that they are fresher.
[ YOCTO #3370 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
These were not getting fixed by orignal committer!
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some patches (disable_goops_optimizations, fix_cross_compilation) don't
seem to be needed anymore. Others (change-install-data-hook, mark-unused-modules)
were updated to work on 2.0.6. Tested by building and running guile under
QEMU with core-image-sato-sdk and also builing guile on MIPS.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In guile meta/Makefile, what install-data-hook do
must be run after install-binSCRIPTS.so it's a exec hook, not a data hook.
If keep these exec-hook in data-hook,when we run make with multi-jobbing ,
install-data-hook and install-binSCRIPTS will be separately
processed in different thread, no any dependence.
that will cause error sometimes.
[YOCTO #2796]
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was causing the x86_64-linux-guile script to not have all the
environment bits needed
V2: Forgot PR Bump!
[YOCTO #2835]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds a fix where arm endianness is detected correctly
secondly it adds a missing dependency on libatomics-ops
which was found when build in clean tmpdir and populating
it from a valid sstate.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
eglibc 2.16 does not export gets anymore
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit fixes the guile compilation segfault on MIPS/PPC.
Tested by compiling guile with MACHINE=qemumips.
[Yocto #2478]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
When guile-native was relocated, there were messages like:
;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm
;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go
and this confuses things like the autogen-native "guile --version"
check. This patch ensures the wrapper script sets the necessary
variables correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this build of autogen-native break if the guile-native package has been
recloated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1978]
Fixing the cross configure failure by not searching libltdl and libgmp
in includedir and libdir.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
