summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/gcc
AgeCommit message (Collapse)AuthorFiles
2016-07-08gcc: remove GCC 4.9Ross Burton80
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-08gcc: remove unused patchRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-08gcc-5.4: Fix hang with mmusl option on cmdlineKhem Raj1
When using -m32 -mmusl options in this order, gcc hangs in parsing the options decode_cmdline_options_to_array() the reason is that we have broken the link when adding mmusl options, the order of specifying libc was not kept in order as a result it was unable to contruct the array correctly and ended in parse hang. We fix the options to specify the order properly. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-01gcc5: Upgrade to gcc 5.4Khem Raj78
Drop patches which has been applied to gcc5 branch until 5.4 release Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-15gcc: make sure header path is set correctlyAnuj Mittal1
We're setting the native header paths in do_configure_prepend, and don't need to set them again here. This results in gcc-target not being able to locate the headers and not being able to detect glibc version, which in turn results in SSP support not getting detected even though it's available in libc. Signed-off-by: Anuj Mittal <anujx.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-03gcc: fix upstream check for 5.x versionAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-30gcc: Backport nios2 gcc ICE fixMarek Vasut2
Backport a patch from mainline gcc 5 branch to fix ICE triggered when cross-compiling libdrm for nios2 architecture. The same ICE is fixed in gcc6 already. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-17gcc: Security fix CVE-2016-4490Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-17gcc: Security fix CVE-2016-2226Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-17gcc: Security fix CVE-2016-4489Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-17gcc: Security fix CVE-2016-4488Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-14gcc 4.9: backport gperf fixesDan McGregor2
From: Daniel McGregor <daniel.mcgregor@vecima.com> gperf was being used in a way that generated files don't conform to the language standard. Backport the fix from upstream. This is required to build these GCC versions when the host compiler is GCC 6. Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-14gcc-5.3: backport gperf fixesDan McGregor2
From: Daniel McGregor <daniel.mcgregor@vecima.com> gperf was being used in a way that generated files don't conform to the language standard. Backport the fix from upstream. This is required to build these GCC versions when the host compiler is GCC 6. Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-13gcc-runtime, libgcc: Symlink c++ header and startup files in target_triplet ↵Khem Raj2
for SDK use We build SDKs such that gcc-cross-candian is built for only one target *-*-linux and then use -muclibc or -mmusl to let it compile code for other libc variants. This works fine when libc = glibc however it does not work for c++ programs when libc != glibc since there are c++ headers installed under ${includedir}/c++/${BINV}/${TARGET_SYS} which is fine when gcc-runtime and gcc-cross-candian uses same --target options gxx includedir searches in right triplet, but it fails with musl/uclibc since gcc will look for glibc based triplet but gcc-runtime will install them under musl/uclibc triplet. This patch symlinks the musl/uclibc triplet to glibc triplet when libc != glibc This fixes SDKs for musl/uclibc Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-13libgcc: Ensure that gcc configure options are passed to libgcc tooKhem Raj1
libgcc uses certain options from EXTRA_OECONF as well, curently we are ignoring them, as a result we do not configure libgcc to match cross gcc in some cases e.g. ppc/musl should have used 64bit long doubles but it went for 128-ldbls which is default, works on glibc but not on musl Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-13libgcc: Ensure that gcc configure options are passed to libgcc tooKhem Raj2
libgcc uses certain options from EXTRA_OECONF as well, curently we are ignoring them, as a result we do not configure libgcc to match cross gcc in some cases e.g. ppc/musl should have used 64bit long doubles but it went for 128-ldbls which is default, works on glibc but not on musl Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-13gcc: Add gcc6 recipesKhem Raj60
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-13gcc-target.inc: Use SYSROOT_DIRS_BLACKLIST to exclude dirs from sysrootPeter Kjellerstedt1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-11gcc: obey ldflags in the link of libgccChristopher Larson4
Explicitly obey it, the way it should, rather than only relying on --with-linker-hash-style. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29gcc-sanitizers: Depend on target gccJussi Kukkonen1
Without this the target gcc might not be in the sysroot leading to configure failure. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-14gcc-common.inc: String format tweak for available tunesnoel eck1
Small change to python string formatting for error logging. Previously, tune and availtunes would print out at the end of the log message. This change allows them to print out in the correct locations of the error string. Signed-off-by: noel eck <kceleon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-30gcc: Fix musl ldso name for mips64Khem Raj1
Now we have mips64 port of musl and there is a name for ldso, backport the fix from upstream gcc master Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-03-30gcc-5.3/gcc-4.9: -fdebug-prefix-map support to remap relative pathHongxu Jia4
For relative path in DWARF, -fdebug-prefix-map could not remap it, so translate to real path before mapping. [YOCTO #9305] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-29gcc: Backport fixes for musl ssp configurationKhem Raj3
We were trying to inject cached configure variables via EXTRA_OECONF, but that was not working due to the fact that gcc configure is called recursively via makefiles and hence these were getting lost. These backports from master fixes the problem by defining the options in configure itself dl_iterate_phdr is provided by musl as well, so lets not depend on glibc defines like inhibit_libc alone Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-20gcc-5.3/gcc-4.9:Reuse -fdebug-prefix-map to replace -ffile-prefix-mapHongxu Jia4
The oe-core may use external toolchain for compiling, which did not support -ffile-prefix-map. Since we use -fdebug-prefix-map to do the same thing, so we could reuse it to replace -ffile-prefix-map. [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-20gcc-5.3/gcc-4.9:replace build path with target path in __FILE__Hongxu Jia4
Similar -fdebug-prefix-map, add option -ffile-prefix-map to map one directory name (old) to another (new) in __FILE__, __BASE_FILE__and __builtin_FILE (). With this patch, it fixes build path issue which caused by __FILE__. We do not need to use relative path to compile any more. [YOCTO #7058] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70268 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-20gcc-runtime.inc: set LICENSE for all gcc-runtime packagesAndre McCurdy1
LICENSE_${PN} doesn't apply to all gcc-runtime packages. Set LICENSE instead. Without this fix, gcc-runtime packages such as libstdc++ are excluded from rootfs for builds which blacklist GPLv3. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12gcc: Fix the license on GNU OpenMPHelio Chissini de Castro1
Poky jethro has libgomp ( GNU OpenMP ) license marked as GPL-3.0, where's in fact the correct is GPL-3.0 with GCC Library Runtime Exception As stated on https://github.com/gcc-mirror/gcc/blob/master/libgomp/libgomp.h header license: ... Under Section 7 of GPL version 3, you are granted additional permissions described in the GCC Runtime Library Exception, version 3.1, as published by the Free Software Foundation. ... Signed-off-by: Helio Chissini de Castro <helio.castro@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12Revert "gcc: Fix the license on GNU OpenMP"Ross Burton1
This reverts commit 892fbe373c5cff7b2f28b58aa2508b47e53d3e63.
2016-03-11gcc: Disable libitm for MicroBlazeNathan Rossi1
Disable libitm as it is not supported on MicroBlaze. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-11gcc: Fix the license on GNU OpenMPHelio Chissini de Castro1
Poky jethro has libgomp ( GNU OpenMP ) license marked as GPL-3.0, where's in fact the correct is GPL-3.0 with GCC Library Runtime Exception Signed-off-by: Helio Chissini de Castro <helio.castro@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-10gcc: Disable libitm for nios2Marek Vasut1
The libitm is not supported on nios2, so disable it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Ross Burton <ross.burton@intel.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Walter Goossens <waltergoossens@home.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-06gcc-runtime.inc: disable libitm for little endian MIPS tooAndre McCurdy1
libitm is already disabled for big endian MIPS, but needs to be disabled for little endian MIPS targets too. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-02gcc: Add support for atomic opertions (libitm) where availableMark Hatle2
GCC 4.7 and newer have supported various automic operation directives, however these have not been previously enabled. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-28gcc: use relative path for configure scriptHongxu Jia4
The absolute path (/path/to/configure) caused __FILE__ to be an absolute path. If 'assert' invoked, it uses __FILE__, and build path would be in elf files. In assert.h ... .# define assert(expr) \ ((expr) \ ? __ASSERT_VOID_CAST (0) \ : __assert_fail (__STRING(expr), __FILE__, __LINE__, __ASSERT_FUNCTION)) ... Which triggered buildpaths QA issue: ... | libgcc-5.3.0: File work/core2-64-poky-linux/libgcc/5.3.0-r0/packages-split/ libgcc-dev/usr/lib64/x86_64-poky-linux/5.3.0/libgcc.a in package contained reference to tmpdir [buildpaths] ... Use relative path to run configure can fix the problem. [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-21glibc: Upgrade to 2.23Khem Raj1
Drop kconfig and options-group support Forward port cross-localedef support Assume ssp support in libc when building gcc-initial Signed-off-by: Khem Raj <raj.khem@gmail.com>
2016-02-19gcc-5.3: backport fix for PR-target-65358Martin Jansa2
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18gcc: Backport nios2 r31 fixMarek Vasut2
Backport a fix from GCC mainline, which fixes libpcre 8.38 and expat 2.1.0 build on nios2. The example of the fixed error follows: | ./nios2-poky-linux-libtool --silent --mode=compile nios2-poky-linux-gcc -mel -mhw-div -mhw-mul --sysroot=/mnt/work/Yocto/build-nios2/tmp/sysroots/10m50 -I../expat-2.1.0/lib -I. -O2 -pipe -g -feliminate-unused-debug-types -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H -o lib/xmltok.lo -c ../expat-2.1.0/lib/xmltok.c | {standard input}: Assembler messages: | {standard input}:4988: Error: r31 cannot be used with jmp; use ret instead | {standard input}:9703: Error: r31 cannot be used with jmp; use ret instead | {standard input}:20068: Error: r31 cannot be used with jmp; use ret instead | {standard input}:24020: Error: r31 cannot be used with jmp; use ret instead | Makefile:196: recipe for target 'lib/xmltok.lo' failed | make: *** [lib/xmltok.lo] Error 1 | WARNING: exit code 1 from a shell command. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-18gcc-4.9/5.3: Ignore -fdebug-prefix-map in producer stringHongxu Jia4
Backport from upstream master. The discussion detail: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69821 Compile without this fix: objdump -g packages-split/lib32-glibc-dev/usr/lib/gcrt1.o ... | <5f> DW_AT_producer : (indirect string, offset: 0x1b): GNU C99 5.3.0 -m32-march=core2 -mtune=core2 -msse3 -mfpmath=sse -mpreferred-stack-boundary=4 -g -O2 -std=gnu99 -fgnu89-inline -fdebug-prefix-map=/buildarea/raid0/hjia/buil d-20160127-yocto-buildpath-2/tmp/sysroots/lib32-qemux86-64= -feliminate-unused-debug-types -fmerge-all-constants -frounding-math -ftls-model=initial-exec ... Compile with this fix: objdump -g packages-split/lib32-glibc-dev/usr/lib/gcrt1.o ... | <5f> DW_AT_producer : (indirect string, offset: 0xa1): GNU C99 5.3.0 -m32 -march=core2 -mtune=core2 -msse3 -mfpmath=sse -mpreferred-stack-boundary=4 -g -O2 -std=gnu99 -fgnu89-inline -feliminate-unused-debug-types -fmerge-all-constants -frounding-math -ftls-model=initial-exec ... [YOCTO #7058] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-07gcc: musl related fixes for ppc/secure-plt and gthrKhem Raj3
These issues are fixing building gcc for target, ppc issue helps in fixing discrepency between gcc cmdline and linker cmdline Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-07gcc: Assume libssp and dl_iterate_phdr on muslKhem Raj1
gcc configure fails to set these settings correctly on musl based builds Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-07gcc: Fix build on musl with -fstack-protectorKhem Raj4
When enabling the secutity flags on musl based targets the builds fail due to libssp(gcc-runtime) build asking to link with libssp and libssp_nonshared.a when configuring libssp itself. This does not work with musl since it does provide ssp implementation but not like glibc where these libraries are separate to libc Fix the nios2 patch with upstream status while at it and generate the patch after applying to my tree Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-02gcc-configure-common.inc: drop --enable-target-optspace from configureAndre McCurdy2
Configuring gcc with --enable-target-optspace (which causes gcc to append "-g -Os" to the default CFLAGS_FOR_TARGET and so force libgcc etc target libraries to always be optimised for size) dates back to the very first commit in oe-core git in 2005 (for gcc 3.4.3). Configuring gcc with --enable-target-optspace is not done widely elsewhere (it's not used for Ubuntu or Fedora host gcc, the Linaro binary toolchain or in Buildroot since early 2015). Sometime around gcc 4.5.x it caused problems for powerpc and so was disabled for that architecture: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=43810 This patch removes --enable-target-optspace completely (ie powerpc is no longer a special case) and allows optimisation of libgcc etc to be controlled directly by the flags present in TARGET_CFLAGS. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-02machine/include: drop tune-cortexm*.inc and tune-cortexr4.incAndre McCurdy1
The Cortex M1, M3 and R4 CPU tuning files are poorly tested (if at all). They have no obvious users either inside or outside oe-core. Until OE officially gains support for CPUs without an MMU, these tuning files are probably better maintained outside of oe-core (e.g. in a separate meta-nommu layer). Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-30gcc, qemuppc: Explicitly disable forcing SPE flagsKhem Raj1
G4 does not have SPE, so we make that explicit in the tune files and since we emulate G4 when building Qemu, we ensure it for qemuppc as well. GCC config for powerpc-linux is made to include SPE by default which is equivalent if the tripet was powerpc-linux*spe, this forces gcc to configure assembler to enable -mspe by default, when we do that then the kernel fails to compile with binutils 2.26, since newer assembler is smart to detect the tlbia instructions are not compatible with SPE and hence the kernel build breaks rightly. We configure the kernel for G4 as well where it enables tlbia instrucitons rightly so because it thinks its being configured for power4. So we keep the options but do not force -mspe down to assembler as default. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-29gcc-cross.inc: drop pruning of PATCH_GET from the testgcc scriptAndre McCurdy1
PATCH_GET is no longer exported by bitbake.conf, so no longer needs to be pruned from the gcc-cross do_compile() environment. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-29gcc: fix hidden weak symbols by removing buggy gcc patchMathieu Desnoyers2
We are noticing the presence of the following patch in various openembedded gcc versions: 0024-PR-target-32219.patch However, contrarily to its "Backport" status, that patch is not upstream in gcc, and it breaks handling of start/stop automatic weak hidden symbols we use in lttng-ust. We are only experiencing problems on the various openembedded compilers, but on no other distro (with same compiler versions), which led us to suspect a buggy distro-specific gcc patch. We've been testing with openembedded gcc-4.9.2-r0. Rebuilding the gcc compiler with this patch removed fixes the lttng-ust issue. Link: http://lists.openembedded.org/pipermail/openembedded-core/2016-January/116306.html Link: http://lists.lttng.org/pipermail/lttng-dev/2014-May/023112.html Link: https://gcc.gnu.org/ml/gcc-help/2014-05/msg00042.html Link: http://cgit.openembedded.org/openembedded-core/commit/?id=3cb2b003db7371b3a47d02c08352a262e1e419b4 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=15435 Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-25gcc-cross-canadian: Add missing DEPENDS on virtual/${HOST_PREFIX}gcc-crosssdkRichard Purdie1
The cross-canadian compiler needs the nativesdk compiler to build but for some reason this was missing. Add the missing dependency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-20gcc-runtime.inc: provide libquadmathIoan-Adrian Ratiu1
libgfortran's build fails with "ld: cannot find -lquadmath" unless libquadmath is added to gcc-runtime's RUNTIMETARGET Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-19gcc-runtime: switch to removal override syntax to modify CXXFLAGSJoshua Lock1
The use of immediate expansion can cause issues when trying to override variables, further the removal override syntax is clearer than oe_filter_out () — switch to using removal override syntax instead. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 20:32:45 +0000