summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/gcc
AgeCommit message (Collapse)AuthorFiles
2013-01-15gcc: add missing dependency (zlib)Constantin Musca1
- add zlib to DEPENDS (it fails otherwise) Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-01-07gcc: restore FILESPATHGiuseppe CONDORELLI1
restore FILESPATH to previous setting because the new one doesn't allow the normal use of FILESEXTRAPATHS_prepend in the case of append recipe. In the current implementation, in fact, the FILESPATH is statically set into the gcc-4.7.inc and so the base_set_filespath is not invoked to manage extrapaths. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-12-19gcc-cross-canadian.inc: Add dependency on cross-gccKhem Raj1
gcc-cross-canadian uses cross compiler during libgcc build when building from sstate the build failed when building gcc-cross-canadian since it did not populate gcc-cross therefore add an explicit dependency on virtual/${TARGET_PREFIX}gcc to make sure that gcc-cross is available before building gcc-cross-canadian Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-11-24gcc: Add --enable-linker-build-idColin Walters1
See https://fedoraproject.org/wiki/Releases/FeatureBuildId for the benefits this brings. As far as I can tell from searching the discussion archives, there doesn't appear to be a reason not to enable this, and the benefits are real. Both the Red Hat Enterprise Linux 6, all Fedora, and Ubuntu Quantal GCC builds are configured with this on. I plan to use it in gnome-ostree. Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24gcc-cross: Explicitly depend on linux-libc-headersRichard Purdie1
gcc-cross cannot build without linux-libc-headers but doesn't explicitly depend on it relying on the implied dependency through libc. With cases where pieces can be installed through sstate, we now need this explicit dependency to ensure builds with partial sstate work. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21gcc: Use FILESPATH instead of FILESDIR and cleanup/simplifyRichard Purdie2
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-14classes: Be consistent about sstate-inputdirs/outputdirs ending with '/'Richard Purdie1
If sstate-inputdirs and sstate-outputdirs don't match with ending '/' characters, the manifest file can end up corrupted. This change ensures the metadata is consistent in ending do_populate_root tasks with this character to avoid manifest file corruption. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-10-10gcc-cross-canadian: Fix gettext dependencyRichard Purdie1
There was a problem in commit ad23395cd1f6c0cbfcc6980b6071d589f9f6cde0 since gettext-nativesdk was translated to gettext instead of nativesdk-gettext. This fixes to use the correct dependency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-26gcc-configure-cross: factor out --enable-threads argument into ${GCCTHREADS}Phil Blundell1
This allows BSPs for architectures with no thread support to set (for example) "GCCTHREADS=no" without having to override all the other configure parameters. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-25gcc-common.inc: Consider multilib when renaming libgcc for debian'nessKhem Raj1
When doing multilib builds rpm does not find libgcc1 for lib32 multilib because its not honoring the debian renaming scheme for libgcc-multilib. Lets add MLPREFIX to fix it. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-21gcc: Use 4.7.2 release tarballKhem Raj4
This avoids the SVN or git fetcher issues for gcc and the tar is mirrored around the world so it will not be slow Fixes [YOCTO #2908] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-21bitbake.conf/gcc-common.inc: Fix STAMPCLEAN expressionRichard Purdie1
The globs used for STAMPCLEAN were too greedy matching gcc-cross-initial stamps for gcc-cross for example. This patch resolves that problem making the assumption that PV starts with something numeric. This assumption should hold in most cases and has a better failure case that the current situation. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20bitbake.conf/gcc: Add clean masks for stamp filesRichard Purdie1
This takes advantage of new bitbake functionality to clean up stale stamp files when creating new stamp files. [YOCTO #2961] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12gcc-4.7: Backport libgcc fixes to appease the new build sequenceKhem Raj3
This makes the libgcc builds identical when done with gcc-cross-initial or final gcc-cross. Since eglibc only sees gcc-cross-initial it is important that the final libgcc that appears on root file system is same as the one against which eglibc was built. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12gcc-4.7: Fix build for armv4/EABI and ppc/OsKhem Raj3
arm patch is a forward port from OE/classic ppc patch should help in building images with Os Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-06gcc-cross-initial: Reinstate limits.h generation fixRichard Purdie1
The removal of gcc-cross-intermediate inadvertently reintroduced a problem with the limits.h file being incorrectly/inconsistently generated. http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=b0faebd1f07e1616004bd19664395932e7c2c48f reverted part of: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=c8815d2f21849deb9359706f54dc71490773415e This reintroduces the protected sysroot ensuring the limits.h file is always correctly generated. To reproduce the bug, build gcc-cross, then rebuild gcc-cross-initial and it will reference the limits.h file from gcc-cross in the sysroot. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-31nativesdk: Switch to using nativesdk as a prefix, not a suffixRichard Purdie4
As discussed on the mailing lists, using a suffix to package names is hard and has lead to many recipes having to do PKGSUFFIX games. Its looking extremely hard to scale nativesdk much further without hacking many recipes. By comparison, using a prefix like multilib does works much better and doesn't involve "hacking" as many recipes. This change converts nativesdk to use a prefix using the existing multilib infrastructure. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-24gcc-4.7: Add fix for libtool rpath problemsRichard Purdie2
This avoids problems with libstdc++ having bad rpaths (/usr/lib/../.lib) in its .la file. See the patch for more information. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-22gcc: bump PRMartin Jansa1
* missing in 30617bde61a3b0a0944b49a0c9fb7159dacbb19f, eglibc-initial fails to compile in incremental build with OEBasic Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-21gcc-cross-intermediate, gcc-crosssdk-intermediate: RemoveKhem Raj4
These recipes arent used anymore so delete them Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-08-21gcc-crosssdk-initial_4.7.bb: Add --with-native-system-header-dir to EXTRA_OECONFKhem Raj1
gcc-crosssdk-intermediate will go away and -initial will assume its responsibility therefore transfer the option Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-08-21gcc-cross: Make gcc-cross-initial as the only intermediate gcc stageKhem Raj3
Now glibc can be compiled with gcc-cross-initial therefore prepare the stage to drop gcc-cross-intermediate Also drop arm-nolibfloat.patch should not be needed anymore half of changes in this patch are meant for OABI which we dont use anymore Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-08-07gcc: Disable use of sdt.h headerRichard Purdie2
The target sysroot might contain sdt.h but we don't list this in DEPENDS and shouldn't be referencing it. Unfortunately there is no way to tell configure this since these tests are uncached and we can't force a particular value. The only option is therefore to patch this out. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-06gcc-cross-initial: Ensure it uses an isolated sysrootRichard Purdie1
If we don't do this, a stale limits.h may be detected in STAGING_DIR_TARGET which would result in a different limits.h getting generated by gcc-cross-initial that references it. The referenced limits.h will then not get found by eglibc-initial causing rather strange build failures. The simplest solution is to create a temporary sysroot containing only the things gcc-cross-initial should care about and this results in a correct limits.h file regardless of what else may have been built. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-03gcc: Bump PR since there have been several gcc changes and various problems ↵Richard Purdie1
reported and this should flush anything stale out Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-03gcc-cross-initial: Fix typo causing limits.h not to be presentRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-01gcc-configure-target: Set native-system-header-dir for target gccRichard Purdie1
Without this set, in the case host=target (which it does for on-target gcc), the native header directory is set to the target sysroot with no prefix. This means it would look for sdt.h on the build system instead of in the target headers and this can lead to build failures and is host contamination of the build. The correct fix is to explicitly set the native header directory to the correct location and then the headers get detected correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-26gcc-cross-initial: Stage self sufficient fixed limits.hKhem Raj2
currently gcc installs a limits.h which references to another limits.h which it expects from target sysroot and that header in target sysroot will come from eglibc. So we need to break this catch-22 and hence we install a self sufficient limits.h which is then happy when referenced and doesnt complain about missing limits.h from target sysroot. This is mostly used when eglibc-initial configure is run Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-24libgcc: Add missing dependency on libc:do_packageRichard Purdie1
do_package writes out shlibs data and libgcc can depend on the values there. We therefore need to express the depdency so that sstate can account for it for example. Without this a version change in eglibc can "psersist" in the sstate cache and corrupt builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-18gcc: remove 904-flatten-switch-stmt-00.patchBernhard Reutner-Fischer2
Remove brute-force flattening and bump PR. Refer to -ftree-switch-conversion emit_case_bit_tests(), -ftree-if-to-switch-conversion et al in 4.8 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-18gcc-package-runtime.inc: Fix QA warningMatthew McClintock1
> ERROR: QA Issue: gcc-runtime: Files/directories were installed but not shipped > /usr/lib/libgomp.so.1.0.0 > /usr/lib/libgomp.so.1 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17gcc-cross-initial.inc: Use BFD ld as default alwaysKhem Raj1
When using gold as default linker in final toolchain gcc-cross-initial still needs to use BFD ld since it will link eglibc-initial Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Switch to git SRC_URIKhem Raj1
svn has been giving troubles with svn 1.7 upgrade Remove duplicate definition of S and B variables from gcc-4.7.inc Use 4.7.1.0 for PV to maintain the upgrade path Its an interim solution once we upgrade to 4.7.2 we will drop it. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Refresh support for fsl E5500/E6500Khem Raj6
These patches are backport from gcc mainline they fix issues where eglibc was not compilable for e5500+ due to missing vector intrinsics It obsoletes the existing e5500 patch Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Convert do_headerfix into a definitive patchKhem Raj3
do_headerfix task is essentially editing configuration headers in sources which can well be maintained as a patch which is easier to spot errors (if any) than dynamically edited source tree Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17crosssdk/nativesdk: Ensure EXTRA_OECONF_FPU is unsetRichard Purdie2
If EXTRA_OECONF_FPU is left set, certain ARM variables related to hard-float can get pulled in and trigger rebuilds of the crosssdk code. The best solution is to simply force the variable to a known correct value for the SDK targets currently supported in the same way as TARGET_FPU. There is some slight rearrangement of the gcc code to ensure the variable is always used to call the fpu function. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16Update proto -> protocol for recipesSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-11libgomp: add libgomp (openmp) library, and build for powerpc targets by defaultMatthew McClintock3
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc: gcc-cross-canadian: use correct location for libraries for powerpc64Matthew McClintock2
This fixes the issue where gcc invokes the linker with an incorrect -L library location and gives up because it can't find libraries. It was looking in a /lib folder instead of /lib64 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc-configure-common.inc: use --with-long-double-128 on powerpc to comply ↵Matthew McClintock2
with ABI Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-09gcc-common: Don't use "is" for comparing strings, use "=="Kartik Mohta1
Needed because the equality check was failing here even though upon printing the LHS and RHS were the same. As per http://stackoverflow.com/a/2987975/64537, using "is" compares the memory addresses of the two objects which is not what we want here. We just want to compare the values. Signed-off-by: Kartik Mohta <kartikmohta@gmail.com>
2012-07-05gcc: fix collect2 host contamination problem properlyRichard Purdie1
We added the autoconf cache line a while back to ensure that configure doesn't poke into some hardcoded host paths looking for things it shouldn't. Applying it as part of do_configure wasn't getting it to the do_compile tasks where much of the configure scripts are run by gcc. This changes it to a simple export to ensure it reaches the places it needs to and truly gets rid of the cross compile badness messages from the logs. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29gcc-configure-sdk, gcc-configure-cross: Dont recompute USE_NLSKhem Raj2
This was needed because on eglibc based builds we did not define USE_NLS but now we define it in default config to have a valid value so we do not need this here. Moreover it was wrong and was not covering all cases of uclibc triplets Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29libgcc: Remove unpackage unwind.hKhem Raj1
Fixes build warnings like below WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package: WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include/unwind.h Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-25gcc: Remove csl gcc recipesKhem Raj18
sourcery toolchain is available as external pluggable toolchain if needed. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-25gcc-4.6: Retire into toochain-layerKhem Raj53
If anyone wants it add toolchain-layer from meta-openembedded repo to your setup Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-21gcc: Fix a case of sysroot with trailing / and gxx-include-dir leading slashKhem Raj2
when using --with-sysroot=/ and --with-gxx-headers=/usr/include/c++ configure eats up one leading / from gxx include dir fixed thusly Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-21gcc-4.7: Update to tip of gcc-4_7-branch since 4.7.1 has been outKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-18gcc-cross: argument list too long when do_installRobert Yang4
There would be an "Argument list too long" error when the length of tmpdir is longer than 190, this is caused by: headers=`echo $(PLUGIN_HEADERS) | tr ' ' '\012' | sort -u` The PLUGIN_HEADERS is too long before sort, so the "echo" can't handle it, use the $(sort list) of GNU make which can handle the too long list would fix the problem, the header would be short enough after sorted. The "tr ' ' '\012'" was used for translating the space to "\n", the $(sort list) doesn't need this. This doesn't impact the output, so it doesn't need the PR bump. [YOCTO #2591] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-06-15gcc-target: ensure target packages have the correct virtual package namesSaul Wold2
Resolves this error during do_rootfs: | * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-core-standalone-sdk-target: | * eglibc (>= 2.15) * | * opkg_install_cmd: Cannot install package task-core-standalone-sdk-target. NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-05 01:56:50 +0000