summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/gcc
AgeCommit message (Collapse)AuthorFiles
2016-07-27gcc: make sure header path is set correctlyAnuj Mittal1
We're setting the native header paths in do_configure_prepend, and don't need to set them again here. This results in gcc-target not being able to locate the headers and not being able to detect glibc version, which in turn results in SSP support not getting detected even though it's available in libc. (From OE-Core master rev: 85630aa894278e7818c867179dc19ca2fbd994fc) Signed-off-by: Anuj Mittal <anujx.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-05-17gcc: Security Fix CVE-2016-4490Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-2226Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-4489Armin Kuster2
Signed-off-by: Armin Kuster <akuster808@gmail.com>
2016-05-17gcc: Security fix CVE-2016-4488Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-04-11gcc-cross-canadian.inc: add INSANE_SKIP_ to avoid build warningLi Xin1
WARNING: QA Issue: gcc-cross-canadian-i586-dbg: found library in wrong location: /PATH/sysroots/x86_64-oesdk-linux/usr/libexec/i586-oe-linux/gcc/ i586-oe-linux/5.2.0/.debug/libcc1.so.0.0.0 This warning is introduced by commit f6e47aa(gcc-target 5.1: fix for libcc1) Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-27gcc: Update default Power GCC settings to use secure-pltMark Hatle3
The gcc default, bss-plt, will cause errors when using the prelinker. All other distributions that I am aware of are using the the secure-plt. For an explanation of the differences, the gcc docs: Current PowerPC GCC accepts a `-msecure-plt' option that generates code capable of using a newer PLT and GOT layout that has the security advantage of no executable section ever needing to be writable and no writable section ever being executable. PowerPC ld will generate this layout, including stubs to access the PLT, if all input files (including startup and static libraries) were compiled with `-msecure-plt'. `--bss-plt' forces the old BSS PLT (and GOT layout) which can give slightly better performance. The security of the new PLT and ability to run the prelinker outweigh any performance penalty. The secure-plt is enabled by default. The old bss-plt can be enabled by selecting 'bssplt' in the DISTRO_FEATURES. (From OE-Core master rev: 70c55aada1101a5c687cdaa79f370fa4530b39d9) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-12-27guile, mailx, gcc, opensp, gstreamer1.0-libav, libunwind: disable thumb ↵Martin Jansa1
where it fails for qemuarm Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2015-10-24gcc-target.inc: Add support for executable thats may have a suffixMark Hatle1
In the past GCC has used a wildcard to permit generating executables that may have a suffix, such as .exe. This wild card was lost in one of the updates. Adding the wild card back in fixes a number of issues when generating a mingw gcc. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-21gcc-5.2: Fix various _FOR_BUILD and related variablesMark Hatle2
When doing a FOR_BUILD thing, you have to override CFLAGS with CFLAGS_FOR_BUILD. And if you use C++, you also have to override CXXFLAGS with CXXFLAGS_FOR_BUILD. Without this, when building for mingw, you end up trying to use the mingw headers for a host build. The same goes for other variables as well, such as CPPFLAGS, CPP, and GMPINC. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-19gcc-4.x: fix wrong warning when using the universal zero initializer {0}Kai Kang4
When I upgrade efivar to 0.21, it fails to compile with error messages: | linux.c:850:9: error: missing braces around initializer [-Werror=missing-braces] | struct ifreq ifr = { 0, }; | ^ It is a known issue of gcc. Backport patch from https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119 to fix wrong warning when using the universal zero initializer {0}. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-01gcc-multilib-config: Ensure SDK_ARCH doesn't change target sigsRichard Purdie1
Changing SDKMACHINE (which changes SDK_ARCH) shouldn't cause target task signatures to change. Exclude the dependency on SDK_ARCH for this reason. It only affects nativesdk builds and those already account for SDK_ARCH in the build WORKDIR paths. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-28gcc-multilib-config: Expand ccargs variableYuanjie Huang1
The ccargs obtained from get_tune_parameters may not be fully expanded, so that the gcc_multilib_setup function can be confused, and generates invalid MULTILIB_OPTIONS in GCC Makefile fragment, which will break the multilib feature of target gcc. To address problems above, this patch modifies gcc_multilib_setup function to expand ccargs before use. Upstream-Status: Inappropriate [configuration] Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-26gcc-runtime: Add multilib C++ header mappingRichard Purdie1
The SDK was unable to find the C++ header pieces correctly since its using a generic compiler, not one specifically targeting the multilib vendor prefix. This adds in the right mapping to ensure multilib SDKs work as expected. This fixes multilib SDK automated tests. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-24gcc-shared-source: Set empty SRC_URIRichard Purdie1
gcc-source is the only gcc recipe meant to handle the fetch/unpack/patch tasks, the other gcc recipes then depend on this. This approach has been creating some confusion for tools like the archiver. The simplest way to signal to these processes that there is no source is to empty SRC_URI at the same time we disable the other tasks. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-24libgcc.inc: package baremetal multilib librariesJuro Bystricky1
When building libgcc some files and libraries may be built but not packaged. The original code packaged only some explicitly specified files targeting mostly x86. This patch does not discriminate between various targets. It fixes errors such as these: ERROR: QA Issue: libgcc: Files/directories were installed but not shipped in any package: /usr/lib/arm-poky-eabi/4.9.3/thumb /usr/lib/arm-poky-eabi/4.9.3/fpu /usr/lib/arm-poky-eabi/4.9.3/thumb/libgcov.a /usr/lib/arm-poky-eabi/4.9.3/thumb/crtn.o /usr/lib/arm-poky-eabi/4.9.3/thumb/crtend.o /usr/lib/arm-poky-eabi/4.9.3/thumb/crtbegin.o /usr/lib/arm-poky-eabi/4.9.3/thumb/libgcc.a /usr/lib/arm-poky-eabi/4.9.3/thumb/crti.o /usr/lib/arm-poky-eabi/4.9.3/fpu/libgcov.a /usr/lib/arm-poky-eabi/4.9.3/fpu/crtn.o /usr/lib/arm-poky-eabi/4.9.3/fpu/crtend.o /usr/lib/arm-poky-eabi/4.9.3/fpu/crtbegin.o /usr/lib/arm-poky-eabi/4.9.3/fpu/libgcc.a /usr/lib/arm-poky-eabi/4.9.3/fpu/crti.o Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. [installed-vs-shipped] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-23gcc-5.2: disable islRichard Tollerton1
We presently don't package isl. Unfortunately, if the host is already using gcc-5.2 (as is presently the case on Arch Linux), configure will autodetect the host's libisl, and do_compile will break because the system isl headers aren't pulled in. In lieu of packaging isl, disable it for now. [YOCTO #8376] Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12gcc: reformat 0063-nativesdk-gcc-support.patchRoy Li1
0063-nativesdk-gcc-support.patch can not be applied to source code due to the buggy patch command on sled11, so reformat it, nothing is changed. Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12meta: Fix Upstream-Status statementsRoss Burton3
Fix a variety of problems such as typos, bad punctuations, or incorrect Upstream-Status values. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-12gcc-5.2: remake 0040-nativesdk-gcc-support.patchRobert Yang1
It couldn't be applied by sled11's patch, now fix it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-03gcc-target.inc: Remove non-related gcc headers from include_fixed folderLeonardo Sandoval1
Without this patch, the D's include_fixed folder may change after building it (due to the gcc's fixinc.sh script, executed on the do_compile task) and changes depend on the current sysroot headers, making the gcc's builds non-deterministic. [YOCTO #7882] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-30libgcc-common.inc: overrides for libc-baremetalJuro Bystricky1
Added TCLIBC="baremetal" specific overrides. (From OE-Core rev: 044f989b34e46f919e6b28860d7a1b396b2c3808) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-30gcc-cross.inc: overrides for libc-baremetalJuro Bystricky1
Modifications to to support build for TCLIBC="baremetal" (From OE-Core rev: 9e7da158e0e7628c22013fbee34270f7d2db621f) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-30gcc-cross-canadian.inc: overrides for libc-baremetalJuro Bystricky1
Modify configure arguments (EXTRA_OECONF) to support build for TCLIBC="baremetal" (From OE-Core rev: 87e81e469fd941fa1b41ded3e02644695cafd2dc) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-29gcc-source: exlude from worldRandy MacLeod3
Exclude all versions of gcc-source from world builds so that: bitbake -c <stage> world will work. gcc-source deletes most bitbake build stages since it is a source-only package. Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31gcc-multilib-config: Adapt mips for mips64 and different gcc versionsRichard Purdie1
The location of some files for mips varies between gcc 4.9 and 5.2. Ensure that we cover both cases (and allow specified files to be optional). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31cross-canadian/gcc: Various mips64 fixesRichard Purdie1
"n32" is a mips64 variant we need to consider when processing the TARGET_OS extensions. Also add the multilib extensions for mips64. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31libgcc: Fix symlink handling in cross-arch multilib casesRichard Purdie2
The symlink being generated needs to match both the current arch (e.g. mips or mips64) but also use the underlying TARGET_SYS without multilib extensions to TARGET_VENDOR or extensions to TARGET_OS. The way multilib changes TARGET_VENDOR meant this code did not have a way of removing that change. The method of removing some TARGET_OS suffixes was also not working. By using immediate expansion to run this code, we can run before the multilib code changes it and get the original values. We then use the *current* TARGET_ARCH value in case this does get changed by the multilib since we need to point at the right compiler (32 bit one for 32 bit code). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31gcc-multilib-config: Tweak naming of options to match gcc's expectationsRichard Purdie1
gcc itself does not add the '-' of options to its multilib configuration. We should follow its example. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31gcc-cross-canadian: Add symlink to real-ld alongside other symlinksRichard Purdie1
In some cases such as cross architecture configurations (using mips-X-linux on mips64-X-linux), gcc can get confused about finding a 'real' version of ld. Adding a symlink to 'real-ld' allowed these configurations to work properly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31gcc: Add patch to handle on target multilibs betterRichard Purdie4
On target multilibs did not work properly since gcc-cross-canadian was only searching a limited number of sysroot directories to find multilib target binaries. This adds an extra search path to ensure those binaries are found and our gcc-cross-canadian works everywhere we need it to, e.g. with mips trilib configurations. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31gcc: Add support for nativesdk-gccRichard Purdie8
Being able to build a nativesdk gcc is useful, particularly in cases where the host compiler may be of an incompatible version (or a 32 bit compiler is needed). Sadly, building nativesdk-gcc is not straight forward. We install nativesdk-gcc into a relocatable location and this means that its library locations can change. "Normal" sysroot support doesn't help in this case since the values of paths like "libdir" change, not just base root directory of the system. In order to handle this we do two things: a) Add %r into spec file markup which can be used for injected paths such as SYSTEMLIBS_DIR (see gcc_multilib_setup()). b) Add other paths which need relocation into a .gccrelocprefix section which the relocation code will notice and adjust automatically. This patch adds tweaks to the relocation script to handle the new section too. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-27gcc-target 5.1: fix for libcc1Robert Yang4
Fixed: * gcc 5 introduces a plugin libcc1.so, which is used by gdb, the target gcc didn't build it in the past because gcc_cv_objdump is null, and the error was: gcc-5.2.0/libcc1/configure: line 14531: -T: command not found This only happens for tar gcc as the code shows: if test x$build = x$host; then export_sym_check="objdump${exeext} -T" elif test x$host = x$target; then export_sym_check="$gcc_cv_objdump -T" else export_sym_check= fi * Install libcc1.so and libcc1plugin.so to $(libexecdir)/gcc/$(target_noncanonical)/$(gcc_version) as lto-plugin did. * Use sed command to fix bad RPATH iussue. [YOCTO #7956] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-27gcc5: Upgrade from 5.1 to 5.2Khem Raj54
This is second bugfix release in gcc5 series All backported patches are dropped no other patches needed any rework Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12gcc: remove EXTRA_OECONF_INTERMEDIATERobert Yang4
The gcc-intermediate had been gone, so remove EXTRA_OECONF_INTERMEDIATE. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12gcc-5: Backport patches for -Wno-narrowing behaviour fixesKhem Raj4
Chromium/CEF reveals these warnings which are then treated as errors which has been fixed on gcc_5 branch upsteam. We backport the relevant commits Change-Id: I088a1480d49cdb439c72f0e159bee6de8ba94258 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12gcc-4.9: Upgrade to 4.9.3Khem Raj3
Drop upsteamed patch for https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66483 which is already in 4.9.3 rename 0063-Use-SYSTEMLIBS_DIR-replacement-instead-of-hardcoding.patch to 0062-Use-SYSTEMLIBS_DIR-replacement-instead-of-hardcoding.patch to keep the sequence Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-07gcc: update i586 TARGET_ARCH tests to also handle i686Andre McCurdy2
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-11gcc-source.inc: fix STAMPCLEAN to avoid race issueRobert Yang1
Fixed race issue when build more than one gcc-source and inherit rm_work, for example: $ bitbake gcc-source-4.9.2 gcc-source-5.1.0 File "/path/to/bitbake/lib/bb/build.py", line 512, in exec_task return _exec_task(fn, task, d, quieterr) File "/path/to/bitbake/lib/bb/build.py", line 489, in _exec_task make_stamp(task, localdata) File "/path/to/bitbake/lib/bb/build.py", line 599, in make_stamp os.unlink(name) OSError: [Errno 2] No such file or directory: '/path/to/tmp/stamps/work-shared/gcc-4.9.2-r0.do_rm_work_all.02cf1ed9b79d4edb0a51d3b913b7f9ba' This is because make_stamp() uses glob.glob() to remove the old stamps before create the new one, when gcc-source-5.1.0 removes gcc-4.9.2-r0's stamp, we may get the error. We can't use deltask do_rm_work_all as do_rm_work since it is a recrdeptask, otherwise: ERROR: Command execution failed: Traceback (most recent call last): File "/path/to/bitbake/lib/bb/command.py", line 102, in runAsyncCommand commandmethod(self.cmds_async, self, options) File "/path/to/bitbake/lib/bb/command.py", line 324, in generateDotGraph command.cooker.generateDotGraphFiles(pkgs_to_build, task) File "/path/to/bitbake/lib/bb/cooker.py", line 847, in generateDotGraphFiles depgraph = self.generateTaskDepTreeData(pkgs_to_build, task) File "/path/to/bitbake/lib/bb/cooker.py", line 672, in generateTaskDepTreeData rq.rqdata.prepare() File "/path/to/bitbake/lib/bb/runqueue.py", line 587, in prepare generate_recdeps(dep) File "/path/to/bitbake/lib/bb/runqueue.py", line 575, in generate_recdeps add_resolved_dependencies([taskData.tasks_fnid[t]], tasknames, newdeps) TypeError: list indices must be integers, not NoneType Update STAMPCLEAN to contain ${PV} to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-05-27gcc-source.inc: set PATH for gnu-configize, not for cdAndre McCurdy1
Setting OE's PATH for the 'cd' command has no real effect. In the normal case it has no effect for the gnu-configize command either (since OE's PATH is already set in the context which runs do_preconfigure) but it may be useful when manually re-running a failed gnu-configize commandline copied from an error log, etc. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-14gcc-5: fix installed-vs-shippedRobert Yang1
gcc-5.1.0: gcc: Files/directories were installed but not shipped in any package: /usr/bin/i586-poky-linux-gcov-tool Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-14gcc5: Add back g++ sysroot patchRichard Purdie2
Without this, g++/c++ compilation doesn't work on target due to missing header files. Automated sanity tests fail. Add back the gcc4 patch to address this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-12gcc5: Add PR65779 patch to fix powerpc compile issuesRichard Purdie2
This fixes compile issues on powerpc with gcc 5 which show up with errors like: | make[2]: Entering directory '/media/build1/poky/build/tmp/work/ppc7400-poky-linux/xprop/1_1.2.2-r0/build' | powerpc-poky-linux-gcc -m32 -mhard-float -mcpu=7400 --sysroot=/media/build1/poky/build/tmp/sysroots/qemuppc -Wall -Wpointer-arith -Wmissing-declarations -Wformat=2 -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Wbad-function-cast -Wold-style-definition -Wdeclaration-after-statement -Wunused -Wuninitialized -Wshadow -Wmissing-noreturn -Wmissing-format-attribute -Wredundant-decls -Wlogical-op -Werror=implicit -Werror=nonnull -Werror=init-self -Werror=main -Werror=missing-braces -Werror=sequence-point -Werror=return-type -Werror=trigraphs -Werror=array-bounds -Werror=write-strings -Werror=address -Werror=int-to-pointer-cast -Werror=pointer-to-int-cast -fno-strict-aliasing -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xprop dsimple.o clientwin.o xprop.o -lX11 | /media/build1/poky/build/tmp/sysroots/qemuppc/usr/lib/../lib/libX11.so: undefined reference to `.LCL2' | collect2: error: ld returned 1 exit status [YOCTO #7721] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-09gcc-4.9, gcc-5: Use variable SYSTEMLIBS_DIR instead of hardcoding it for aarch64Khem Raj4
Change-Id: I54dc82a569f02d489137d88f16d6b768c4ab779b Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-09gcc: Add 5 recipesKhem Raj48
Drop backports obviously additionally drop local patches around parallel compilation since it got reworked upstream To select set GCCVERSION = "5.1%" SDKGCCVERSION = "5.1%" in local.conf Change-Id: Icdfa61017a617244128f361b022e7c8f1f9e0610 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-30libgcc-initial: Correctly reflect libgcc LICENSERichard Purdie1
In an effort to clean up some of the license handling, correctly set the LICENSE of libgcc-initial to be the same as libgcc which has a GPLv3 exception. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-30gcc-shared-source: Add PV to PNRichard Purdie2
This means you can have one gcc version for some gcc recipes (e.g. crosssdk/nativesdk) and another gcc version for target code. Also remove the preferred version entry from the default toolchains list since the version issue is now handled automatically. We also need to specifically handle gcc-source in the license handling code since expanding ${PV} in the base class isn't possible. Since gcc-source doesn't generate any packages directly this shouldn't be an issue and whitelisting in this way is easiest (and matches the rest of the toolchain handling). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-24gcc-4.9: backport from gcc trunk r212178Stefan Müller-Klieser2
When compiling meta-toolchain-qt5 on cortexa8, the compiler throws an internal compiler error: ... qttools-opensource-src-5.3.2/src/linguist/shared/po.cpp: In function 'bool loadPO(Translator&, QIODevice&, ConversionData&)': qttools-opensource-src-5.3.2/src/linguist/shared/po.cpp:717:1: internal compiler error: in add_stores, at var-tracking.c:6000 ... Tracking this down led to https://bugs.linaro.org/show_bug.cgi?id=534 It seems the bug is well know and fixed upstream. So backporting from trunk seems to be the right solution. This fixes the compiler problem on cortexa8 and does not seem to be very invasive. The original commit can be found at: git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@212178 138bc75d-0d04-0410-961f-82ee72b054a4 Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-21gcc-target: remove gcc-plugin-dev from PACKAGESRobert Yang1
There should be only one dev and dbg package. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-21libgcc: remove libgcov-dev from PACKAGESRobert Yang1
There should be only one dev and dbg package. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 17:44:22 +0000