summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/gcc/gcc-4.7.inc
AgeCommit message (Collapse)AuthorFiles
2013-05-03gcc-4.7: fix gcc ICE when building with gcc-4.8Josh Cartwright1
Backport fix for internal compiler error when building gcc-4.7.2 with a gcc-4.8.0 host gcc. See upstream bug here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56308 Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04gcc: add patch to disable texinfo when texinfo is 5.0 or newerMartin Jansa1
* this is needed only for 4.7 series, newer works fine with texinfo-5* [YOCTO #3947] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-12gcc-4.7: Fix incorrect warning with -Wcast-qualKhem Raj1
This patch backport the fix where -Wcast-qual reports a bogus warning with 4.7.2, There is no workaround in code that can be done to avoid it hence the fix to gcc is backported. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-11gcc-cross-canadian: enable multilib supportConstantin Musca1
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-05libgcc: Disable multilib install for nativesdkKhem Raj1
Fixes errors when building SDK for multilibbed enabled architectures. [YOCTO #3832] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-04gcc: target: fix libiberty removalConstantin Musca1
- use ${libdir} instead of ${exec_prefix}/lib Fix the following warning: WARNING: QA Issue: gcc: Files/directories were installed but not shipped /usr/lib64/libiberty.a Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-01gcc: enable multilib for target gccConstantin Musca1
- add a task to setup multilib configuration for target gcc - this commit adapts Nitin Kamble's work to gcc 4.7 - use a hash for storing arch-dependent multilib options - patch gcc in order to use the multilib config files from the build directory Tests: root@qemux86-64:~# gcc -m64 t.c -o t root@qemux86-64:~# file t t: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped root@qemux86-64:~# ./t Hello World ! root@qemux86-64:~# gcc -m32 t.c -o t root@qemux86-64:~# file t t: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped root@qemux86-64:~# ./t Hello World ! [YOCTO #1369] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-01-25gcc: Enable OpenMP compiling and libraryMiLo1
Multicore embedded systems are getting more and more common. Remove "--disable-openmp" from the GCC configuration options and always build libgomp. This only creates a "bigger" compiler but has no effect on the compiled binaries that don't use openmp. Tested a clean build on mips32el and arm7a, no problems encountered. Autoconf will not detect OpenMP after this change, because it will build and run a target binary on the build system. In order to use OpenMP, the variable ac_cv_prog_c_openmp=-fopenmp must be set. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-15gcc: add missing dependency (zlib)Constantin Musca1
- add zlib to DEPENDS (it fails otherwise) Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-01-07gcc: restore FILESPATHGiuseppe CONDORELLI1
restore FILESPATH to previous setting because the new one doesn't allow the normal use of FILESEXTRAPATHS_prepend in the case of append recipe. In the current implementation, in fact, the FILESPATH is statically set into the gcc-4.7.inc and so the base_set_filespath is not invoked to manage extrapaths. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-24gcc: Add --enable-linker-build-idColin Walters1
See https://fedoraproject.org/wiki/Releases/FeatureBuildId for the benefits this brings. As far as I can tell from searching the discussion archives, there doesn't appear to be a reason not to enable this, and the benefits are real. Both the Red Hat Enterprise Linux 6, all Fedora, and Ubuntu Quantal GCC builds are configured with this on. I plan to use it in gnome-ostree. Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-11-21gcc: Use FILESPATH instead of FILESDIR and cleanup/simplifyRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-21gcc: Use 4.7.2 release tarballKhem Raj1
This avoids the SVN or git fetcher issues for gcc and the tar is mirrored around the world so it will not be slow Fixes [YOCTO #2908] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12gcc-4.7: Backport libgcc fixes to appease the new build sequenceKhem Raj1
This makes the libgcc builds identical when done with gcc-cross-initial or final gcc-cross. Since eglibc only sees gcc-cross-initial it is important that the final libgcc that appears on root file system is same as the one against which eglibc was built. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12gcc-4.7: Fix build for armv4/EABI and ppc/OsKhem Raj1
arm patch is a forward port from OE/classic ppc patch should help in building images with Os Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-24gcc-4.7: Add fix for libtool rpath problemsRichard Purdie1
This avoids problems with libstdc++ having bad rpaths (/usr/lib/../.lib) in its .la file. See the patch for more information. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-22gcc: bump PRMartin Jansa1
* missing in 30617bde61a3b0a0944b49a0c9fb7159dacbb19f, eglibc-initial fails to compile in incremental build with OEBasic Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-21gcc-cross: Make gcc-cross-initial as the only intermediate gcc stageKhem Raj1
Now glibc can be compiled with gcc-cross-initial therefore prepare the stage to drop gcc-cross-intermediate Also drop arm-nolibfloat.patch should not be needed anymore half of changes in this patch are meant for OABI which we dont use anymore Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-08-07gcc: Disable use of sdt.h headerRichard Purdie1
The target sysroot might contain sdt.h but we don't list this in DEPENDS and shouldn't be referencing it. Unfortunately there is no way to tell configure this since these tests are uncached and we can't force a particular value. The only option is therefore to patch this out. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-03gcc: Bump PR since there have been several gcc changes and various problems ↵Richard Purdie1
reported and this should flush anything stale out Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-26gcc-cross-initial: Stage self sufficient fixed limits.hKhem Raj1
currently gcc installs a limits.h which references to another limits.h which it expects from target sysroot and that header in target sysroot will come from eglibc. So we need to break this catch-22 and hence we install a self sufficient limits.h which is then happy when referenced and doesnt complain about missing limits.h from target sysroot. This is mostly used when eglibc-initial configure is run Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-18gcc: remove 904-flatten-switch-stmt-00.patchBernhard Reutner-Fischer1
Remove brute-force flattening and bump PR. Refer to -ftree-switch-conversion emit_case_bit_tests(), -ftree-if-to-switch-conversion et al in 4.8 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Switch to git SRC_URIKhem Raj1
svn has been giving troubles with svn 1.7 upgrade Remove duplicate definition of S and B variables from gcc-4.7.inc Use 4.7.1.0 for PV to maintain the upgrade path Its an interim solution once we upgrade to 4.7.2 we will drop it. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Refresh support for fsl E5500/E6500Khem Raj1
These patches are backport from gcc mainline they fix issues where eglibc was not compilable for e5500+ due to missing vector intrinsics It obsoletes the existing e5500 patch Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Convert do_headerfix into a definitive patchKhem Raj1
do_headerfix task is essentially editing configuration headers in sources which can well be maintained as a patch which is easier to spot errors (if any) than dynamically edited source tree Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-16Update proto -> protocol for recipesSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-11libgomp: add libgomp (openmp) library, and build for powerpc targets by defaultMatthew McClintock1
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc: gcc-cross-canadian: use correct location for libraries for powerpc64Matthew McClintock1
This fixes the issue where gcc invokes the linker with an incorrect -L library location and gives up because it can't find libraries. It was looking in a /lib folder instead of /lib64 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc-configure-common.inc: use --with-long-double-128 on powerpc to comply ↵Matthew McClintock1
with ABI Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-21gcc: Fix a case of sysroot with trailing / and gxx-include-dir leading slashKhem Raj1
when using --with-sysroot=/ and --with-gxx-headers=/usr/include/c++ configure eats up one leading / from gxx include dir fixed thusly Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-21gcc-4.7: Update to tip of gcc-4_7-branch since 4.7.1 has been outKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-18gcc-cross: argument list too long when do_installRobert Yang1
There would be an "Argument list too long" error when the length of tmpdir is longer than 190, this is caused by: headers=`echo $(PLUGIN_HEADERS) | tr ' ' '\012' | sort -u` The PLUGIN_HEADERS is too long before sort, so the "echo" can't handle it, use the $(sort list) of GNU make which can handle the too long list would fix the problem, the header would be short enough after sorted. The "tr ' ' '\012'" was used for translating the space to "\n", the $(sort list) doesn't need this. This doesn't impact the output, so it doesn't need the PR bump. [YOCTO #2591] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-06-15gcc-target: ensure target packages have the correct virtual package namesSaul Wold1
Resolves this error during do_rootfs: | * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-core-standalone-sdk-target: | * eglibc (>= 2.15) * | * opkg_install_cmd: Cannot install package task-core-standalone-sdk-target. NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-05-24gcc-4.7: Add knowledge about arm hf dynamic loaderKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-20gcc-4.6, gcc-4.7: Add support for building mips64 cross compilerKhem Raj1
Defaults to n64 ABI Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-03gcc-package-target: add libexec for pluginSaul Wold1
Fixes: ERROR: For recipe gcc, the following files/directories were installed but not shipped in any package: ERROR: /usr/libexec/gcc/i586-poky-linux/4.7.1/plugin/gengtype Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-04-26gcc-4.7: Let cpp specs honor include searches in relocated install treeKhem Raj1
Fix from Yocto Bug 2074 Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Lower the internal consistency check level to releaseKhem Raj1
This should help in speeding up compilation at the expense of a bit less info when gcc ICEs but we dont get many gcc ICEs and therefore using --enable-checking=release is right balance Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Disable cloog and pplKhem Raj1
If build system has those libraries installed gcc configure will pick them up. We want consistent builds so we disable them since we do not (yet) support them Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Define own do_configure_prependKhem Raj1
gcc-4.7 does not define STANDARD_INCLUDE_DIR Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Add recipesKhem Raj1
Add new recipes for gcc-4_7-branch right now gcc 4.7.0 is latest release from this branch Signed-off-by: Khem Raj <raj.khem@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-23 15:26:04 +0000