summaryrefslogtreecommitdiff
path: root/meta/recipes-devtools/e2fsprogs
AgeCommit message (Collapse)AuthorFiles
2017-02-15e2fsprogs: 1.43.3 -> 1.43.4Robert Yang2
* Rebased Revert-mke2fs-enable-the-metadata_csum-and-64bit-fea.patch. * The mkfs.ext4dev is gone. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-17e2fsprogs 1.43 -> 1.43.3Zheng Ruoqin1
Upgrade e2fsprogs from 1.43 to 1.43.3 (From OE-Core rev: 250729ed0183e09b8108239eb03b1c5c290ede46) Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-11-01e2fsprogs: Depend on attrJussi Kukkonen1
e2fsprogs builds fine with or without attr but it's possible to end up with this sequence: * e2fsprogs configure finds attr/xattr.h (coming from sstate) * attr starts rebuild, attr/xattr.h is removed from sysroot * e2fsprogs compile fails: "attr/xattr.h: No such file or directory" Depend on attr to ensure reproducible build. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-05e2fsprogs: packaging cleanups (compile_et & mk_cmds)André Draszik1
While comparing what were supposed to be similar filesystems from different build machines, some issues have been noticed in the e2fsprogs recipe, in particular with the compile_et and mk_cmds utilities. 1) target: move compile_et and mk_cmds into the -dev package Both are development tools, from the man pages: compile_et - error table compiler compile_et converts a table listing error-code names and associated messages into a C source file suitable for use with the com_err(3) library. mk_cmds - error table compiler mk_cmds converts a table listing command names and associated help messages into a C source file suitable for use with the ss(3) library. 2) native/nativesdk Also apply cleaning of host path (build directory) here, so that only the sysroot directory remains, which is properly adjusted by the sstate handling. 3) make cleaning of host path actually work The existing sed command wasn't working, in particular for compile_et; we fix up the sed command so that removal of references to the local build directory really works. Do the same changes for mk_cmds, for consistency. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-17e2fsprogs: Fix missing check for permission denied.Jackie Huang2
If the path to "ROOT_SYSCONFDIR /mke2fs.conf" has a permission denied problem, then the get_dirlist() call will return EACCES. But the code in profile_init will treat that as a fatal error and all executions will fail with: Couldn't init profile successfully (error: 13). But the problem should not really be visible for the target package as the path then will be "/etc/mke2fs.conf", and it is not likely that a user have no permission to read /etc. Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-01e2fsprogs: tweak mke2fs ext4 featuresHongxu Jia2
While e2fsprogs upgraded to 1.43, it dropped the patch Revert-mke2fs-enable-the-metadata_csum-and-64bit-fea.patch, we get it back and rebase for 1.43 to fix invoking grub-probe failed. Without the fix: ... root@localhost:~# mkfs.ext4 /dev/sda3 [skip] root@localhost:~# grub-probe --target=fs -d /dev/sda3 grub-probe: error: unknown filesystem. ... After apply the fix: ... root@localhost:~# mkfs.ext4 /dev/sda3 [skip] root@localhost:~# grub-probe --target=fs -d /dev/sda3 ext2 ... Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-21e2fsprogs: Manually bump PR due to PV change (work around sstate confusion)Richard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-06-21e2fsprogs: remove the extra dot from the recipe filenameAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-06-14e2fsprogs: 1.42.99+1.43+git -> 1.43Robert Yang4
* Removed patches already in the source: - Revert-mke2fs-enable-the-metadata_csum-and-64bit-fea.patch - xattr_ordering.patch * COPYING -> NOTICE, the md5sum is the same. * e2fsprogs_git.bb -> e2fsprogs_1.43..bb Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-03e2fsprogs: do not enable non-stable features by defaultJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-15e2fsprogs: Update to upstream version of a patchRichard Purdie1
Switch to the upstream version of the xattr patch. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-11e2fsprogs: Fix multiple xattr handlingRichard Purdie2
There is an ordering issue when adding multiple xattr values to an ext filesystem build using the -d option to mkfs. This patch fixes that issue. Its been posted for discussion with the upstream community. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-05e2fsprogs: Ensure we use the right mke2fs.conf when restoring from sstateRichard Purdie1
If we don't do this, we can use an mke2fs.conf from a different path which may contain incompatible flags and lead to obtuse build failures such as: Invalid filesystem option set: has_journal,extent,huge_file,flex_bg,metadata_csum,64bit,dir_nlink,extra_isize To fix this, wrap the mke2fs binary and its hardlinks and point at the correct configuration file. In particular this fixes conflicts between master and jethro builds affecting the main autobuilder. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-26e2fsprogs: disable blkidRoss Burton1
Both e2fsprogs and util-linux can build blkid, but we want to always use util-linux's for consistency. (blkid was enabled again in a1f235) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-22e2fsprogs: set PV to 1.42.99+1.43+git${SRCPV}Robert Yang1
As Martin and Ross suggested. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-19e2fsprogs: fix upstream version checkAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-19e2fsprogs: fix PVRobert Yang1
We had upgraded e2fsprogs from 1.42.9 to 1.43 (WIP), and used: PV = "1.42+1.43-git${SRCPV}" But: $ dpkg --compare-versions 1.42+1.43 gt 1.42.9 && echo greater || echo less less It shows that 1.42+1.43 is less than 1.42.9, so this is a downgraded. Use PV = "1.42.13+git${SRCPV}" to fix the problem. 1.42.13 is the latest e2fsprogs 1.42 version. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-19e2fsprogs: add PACKAGECONFIG for fuseRobert Yang1
Fixed: e2fsprogs-1.42+1.43-gitAUTOINC+0f26747167: e2fsprogs rdepends on fuse, but it isn't a build dependency? [build-deps] The fuse is in meta-filesystems layer. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-17e2fsprogs: 1.42.9 -> 1.43 (master)Robert Yang23
Upgrade to 1.43 (master) to make "mke2fs -d" support xattr, so that the layer which requires xattr such as meta-selinux can populate images easily. * Remove the following patches since they are alredy in the source. 0001-e2fsprogs-fix-cross-compilation-problem.patch 0001-libext2fs-fix-potential-buffer-overflow-in-closefs.patch 0001-mke2fs-add-the-ability-to-copy-files-from-a-given-di.patch 0002-misc-create_inode.c-copy-files-recursively.patch 0003-misc-create_inode.c-create-special-file.patch 0004-misc-create_inode.c-create-symlink.patch 0005-misc-create_inode.c-copy-regular-file.patch 0006-misc-create_inode.c-create-directory.patch 0007-misc-create_inode.c-set-owner-mode-time-for-the-inod.patch 0008-mke2fs.c-add-an-option-d-root-directory.patch 0009-misc-create_inode.c-handle-hardlinks.patch 0010-debugfs-use-the-functions-in-misc-create_inode.c.patch 0011-mke2fs.8.in-update-the-manual-for-the-d-option.patch 0012-Fix-musl-build-failures.patch CVE-2015-0247.patch copy-in-create-hardlinks-with-the-correct-directory-.patch fix-icache.patch misc-mke2fs.c-return-error-when-failed-to-populate-fs.patch * Remove cache_inode.patch since it is not needed any more * Updated mkdir.patch and ptest.patch * Add --enable-libblkid to EXTRA_OECONF since libblkid is not created by default. * Time of core-image-sato-sdk do_rootfs: - Before upgrade real 3m18.508s user 7m42.088s sys 1m1.984s - After upgrade real 3m21.552s user 7m38.496s sys 1m0.644s The are nearly the same * The "fsck -f" shows the image is OK, and also can boot. [YOCTO #8622] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-01-11Add "CVE:" tag to current patches in OE-coreMariano Lopez2
The currnet patches in OE-core doesn't have the "CVE:" tag, now part of the policy of the patches. This is patch add this tag to several patches. There might be patches that I miss; the tag can be added in the future. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-10-24e2fsprogs: backport a patch to fix filetype for hardlinkRobert Yang2
Backport a patch to fix hardlinks filetype: IMAGE_INSTALL_append = " e2fsprogs" $ ./tmp/sysroots/x86_64-linux/sbin/fsck.ext4 tmp/deploy/images/qemux86/core-image-minimal-qemux86.ext4 -f Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Setting filetype for entry 'fsck.ext2' in /sbin (80) to 1. Setting filetype for entry 'mkfs.ext4' in /sbin (80) to 1. Setting filetype for entry 'fsck.ext4' in /sbin (80) to 1. Setting filetype for entry 'mkfs.ext4dev' in /sbin (80) to 1. Setting filetype for entry 'fsck.ext3' in /sbin (80) to 1. Setting filetype for entry 'mkfs.ext2' in /sbin (80) to 1. Setting filetype for entry 'mkfs.ext3' in /sbin (80) to 1. Setting filetype for entry 'e2fsck' in /sbin (80) to 1. Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information test.img: ***** FILE SYSTEM WAS MODIFIED ***** test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks Now when run it again, we may get: [snip] Pass 3A: Optimizing directories [snip] test.img: ***** FILE SYSTEM WAS MODIFIED ***** test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks This is fine since it is optimizing, from "man e2fsck": e2fsck may sometimes optimize a few directories --- for example, if directory indexing is enabled and a directory is not indexed and would benefit from being indexed, or if the index structures are corrupted and need to be rebuilt. [YOCTO #8544] Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-12meta: Fix Upstream-Status statementsRoss Burton3
Fix a variety of problems such as typos, bad punctuations, or incorrect Upstream-Status values. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-31e2fsprogs: explain why there is no update for nowAlexander Kanavin1
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-07Update alternatives of man pagesKai Kang1
Update alternatives of man pages in several packages. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-05-07e2fsprogs: fix the CVE-2015-1572Roy Li2
Backport a patch to fix CVE-2015-1572 http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-1572 Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-03e2fsprogs: install populate-extfs.shMartin Jansa1
* install populate-extfs.sh from contrib, be aware that in order to use it you need to set DEBUGFS shell variable, otherwise it will try to use debugfs from relative path which is almost always incorrect: CONTRIB_DIR=$(dirname $(readlink -f $0)) DEBUGFS="$CONTRIB_DIR/../debugfs/debugfs" Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-21e2fsprogs: add ptestDmitry Eremin-Solenikov3
Enable ptest for e2fsprogs by reusing provided testsuite. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-03-21e2fsprogs: Package resize2fsAlex J Lennon1
Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-03-16e2fsprogs: CVE-2015-0247Sona Sarmadi2
Fixes a heap buffer overflow in lib/ext2fs/openfs.c which allows a trivial arbitrary memory write under certain conditions. References http://git.kernel.org/cgit/fs/ext2/e2fsprogs.git/commit/?id=f66e6ce4 http://www.ocert.org/advisories/ocert-2015-002.html Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-02-21e2fsprogs: Add a patch to speedup mkfsRichard Purdie2
See the patch description, this adds a tweak to an algorithm to improve core-image-sato-sdk mkfs time from over 8 minutes to about 35s. Needs discussion upstream but seems reasonable for our uses of it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-15e2fsprogs: Extend to add nativesdk for syslinuxRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-25e2fsprogs: clean host path in compile_et, mk_cmdsShiqun Lin1
* /usr/bin/compile_et * /usr/bin/mk_cmds Signed-off-by: Shiqun Lin <Shiqun.Lin@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
2014-09-10e2fsprogs: update acinclude.m4Ross Burton1
Some macros have been added upstream and were not being executed, so refresh our fork of this file. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-10e2fsprogs: remove manual build of util/substRoss Burton1
The build system uses BUILD_CC itself now, so we don't need to do it manually. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-10e2fsprogs: enable verbose buildRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-10e2fsprogs: remove chmodRoss Burton1
This chmod doesn't appear to be needed, and history fades away in 2005. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-08-23e2fsprogs: Backport fixes for building with muslPaul Barker2
Both of these fixes have been applied upstream and improve general code correctness. They are needed when building with TCLIBC=musl but shouldn't cause any harm with other libc implementations. Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-14e2fsprogs: use update-alt for chattrSaul Wold1
Both busybox and e2fsprogs provide chattr, ensure that they are delivered to the same location and use update-alternatives to ensure the correct links are there. [YOCTO #6407] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-01Add texinfo.bbclass; recipes that use texinfo utils at build-time inherit it.Max Eliaser1
The class itself currently does nothing. The idea is to mark all recipes that make use of the texinfo utilities. In the future, this class could be used to suppress the generation/formatting of documentation for performance, explicitly track dependencies on these utilities, and eliminate Yocto's current dependency on the host system's texinfo utilities. Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-08e2fsprogs: fix multilib header conflict - ext2_types.hMing Liu2
ext2_types.h conflicts between 32-bit and 64-bit versions. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-30e2fsprogs: Add e2fsprogs-mke2fs and e2fsprogs-e2fsck as recommend packagesYue Tao1
The mke2fs and e2fsck commands are regular tools of e2fsprogs, so they should be installed. Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-21e2fsprogs: return error when failed to populate fsRobert Yang2
We need return retval when "mke2fs -d" failed, otherwise the "$?" would be 0 which is misleading. [YOCTO #6011] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-11e2fsprogs: fix cross compilation problemChen Qi2
When compiling e2fsprogs for qemumips64, we got compilation errors. The root cause is that parse-types.sh script would fail for mips64. However, the type size checking in parse-types.sh doesn't make much sense in case of cross compilation. This is because that the typedef statements in asm_types.h are for the target machine while the generated binary in parse-types.sh script is executed on build machine. This patch fixes such problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: populate-extfs.sh: remove itRobert Yang2
Remove it since we don't need it anymore, and there is one inside the e2fsprogs. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: enable the "-d" related patchesRobert Yang1
These patches should be enabled at the same time, so enable them in a single commit, and thus we can disable it easily. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: mke2fs: update the manual for the -d optionRobert Yang1
Update the manual for the -d option [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: debugfs: use the functions in misc/create_inode.cRobert Yang1
* Use the functions in misc/create_inode.c, and remove the duplicated code. * The CREATE_INODE_DEPS in the debugfs/Makefile.in is used for recording create_inode.o's depends which is from misc/Makefile.in, we have to recompile create_inode.o because we need it to print more messages when it is used by debugfs, just like we recompile e2freefrag.o, but it seems that the e2freefrag.o's depends in debugfs/Makefile.in is incorrect, it would not rebuild when its depends (e.g.: lib/config.h) is changed, which would cause unexpected errors. Make duplicated code in debugfs/Makefile.in and misc/Makefile.in is not a good idea, maybe we'd better define CREATE_INODE_DEPS in the top Makefile, I'd like to send another patch and fix the e2freefrag if you are fine with it. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: mke2fs: handle hardlinksRobert Yang1
Create the inode and save the native inode number when we meet the hard link (st_nlink > 1) at the first time, use ext2fs_link() to link the name to the target inode number when we meet the same native inode number again. This algorithm is referred from the genext2fs. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: mke2fs: add an option: -d root-directoryRobert Yang1
This option is used for adding the files from a given directory (the root-directory) to the filesystem, it is similiar to genext2fs, but genext2fs doesn't fully support ext4. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-07e2fsprogs: mke2fs: set owner/mode/time for the inodeRobert Yang1
Set the uid, gid, mode and time for inode. [YOCTO #4083] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 14:12:39 +0000