summaryrefslogtreecommitdiff
path: root/meta/recipes-core
AgeCommit message (Collapse)AuthorFiles
2013-08-22busybox.inc: Avoid error when SYSLOG is not enabledFlorin Sarbu1
Add -f to rm of ${D}${sysconfdir}/syslog-startup.conf.${BPN} so as to not error out when the busybox config used does not have SYSLOG enabled and DISTRO_FEATURES does not contain sysvinit. Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-20coreutils: allow for acl supportJoe Slater1
CQID: 430353 Define PACKAGECONFIG info for acl assuming it might be a DISTRO_FEATURE. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20coreutils: add PACKAGECONFIG info for acl supportJoe Slater1
Updates GPLv2 version of coreutils. They also want patches for other packages that might use acl. CQID: 430353 Add configuration data to enable acl support if it is a distro feature. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20initscripts: remove obsolete device_table.txtChen Qi2
device_table.txt was once used by an init script named 'devices' to create the basic files under /dev. However, it's no longer used now. The devices init script has been removed, and makedevs command has been disabled by default in busybox. Besides, considering the device managers and devtmpfs filesystem, this file is not likely to be used again. So we remove it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20init-install.sh: fix to handle the boot partition correctlyChen Qi1
Previously, the boot partition was created for the target hard drive but there was no corresponding entry for it in /etc/fstab. Besides, even if the boot partition was mounted, it would just result in odd directory hierarchy like /boot/boot/grub. However, what we really need is /boot/grub. This patch fixes this problem. Besides, for future maintance work, this patch also renames some of the intermediate directories. It uses more descriptive names like /tgt_root and /src_root. The name of /ssd is dropped. [YOCTO #5018] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20init-install.sh: improve hard drive searching processChen Qi1
Previously, only unremovable hard drives are searched and are treated as candidates of target disks to intall into. However, it's possible that we're going to install the live image into a removable media such as an USB. This patch enables this possibility. In addition, this patch presents more information about the hard drives so that user may have more knowledge about which hard drive they are going to install their image into. [YOCTO #5018] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20gettext: update to upstream version 0.18.3Marko Lindqvist10
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20glib-2.0: update to upstream version 2.36.4Marko Lindqvist1
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20glib-2.0: use trim_version() to get the source directoryMarko Lindqvist1
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-20uclibc: Upgrade to latest on gitKhem Raj2
It brings fixes needed for python3 to work on uclibc/64bit targets Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16populate-volatile.sh: use 'cp -a' to avoid potential problemChen Qi1
Previously, dead links in target directory will not be copied. This is incorrect as dead links are not uncommon in our rootfs. So we use '-a' option instead. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16populate-volatile.sh: don't spawn background process at rootfs timeChen Qi1
If we're building a read-only rootfs, we'll get the following error now and then. tar: .: file changed as we read it The root cause is that we spawn background process at rootfs time. When the tar command is running, it's possible that files under rootfs are changed by background processes, thus this error. [YOCTO #4937] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16populate-volatile.sh: use $ROOT_DIR/var/volatile/tmp as TMPDIRChen Qi1
It's possible that a 'No such directory' error occurs when doing check_requirement in populate-volatile.sh at rootfs time. This is because the $ROOT_DIR/var/tmp might be a dead link. Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this error. [YOCTO #4883] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16udev: remove implicit dependency on initscriptsChen Qi1
At some point, the udev was modified to source the functions from initscripts or lsbinitscripts. This dependency is actually not needed. If we use udev in a system where initscripts from oe-core is not available, there will be errors. This patch fixes this problem by removing the implicit dependency. [YOCTO #4882] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-16init-live.sh: make $ROOT_MOUNT/media writable when necessaryChen Qi1
If the live image is mounted as read-only, we cannot make necessary directories under $ROOT_MOUNT/media, so trying to move the mount points lead to errors. So in case that no unification filesystem mechanism is available in kernel and the rootfs is mounted as read-only, we mount tmpfs on $ROOT_MOUNT/media so that it's possible to make necessary directories under it. [YOCTO #4881] [YOCTO #4103] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09checkroot.sh: respect the value of ENABLE_ROOTFS_FSCKChen Qi1
Previously, fsck is always disabled because the value of rootcheck in the checkroot.sh script is always set to 'no'. We should respect the value of ENABLE_ROOTFS_FSCK in /etc/default/rcS to allow for filesystem check. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09build-appliance-image: upgrade to ac60aa8cf707eec58e2cb51e7c406250d0b43ef1 ↵Cristian Iorga1
commit. Fixes [YOCTO #4977]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09busybox: remove syslog-startup.conf if sysvinit not in DISTRO_FEATURESChen Qi1
sysvinit and systemd have different ideas about configuration files (or environment files in systemd), so basically we can't use the same one in both cases. To avoid confusion, this patch removes syslog-startup.conf if 'sysvinit' is not in DISTRO_FEATURES. [YOCTO #4837] [YOCTO #4860] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05util-linux: upgrade to 2.23.2Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05packagegroup-core-boot: correct runtime dependencies for non-sysvinit systemSaul Wold1
hwclock, ifup-down and modutils are all sysvinit scripts that are available in systemd also. [YOCTO #4969] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05buildtools-tarball: do not export OECORE_NATIVE_SYSROOTChen Qi1
When building a qemu image inside the environment created by the buildtools-tarball, the qemu image cannot be started, as the runqemu script uses the tunctl binary which cannot be found inside the sysroot directory of the buildtools-tarball. The buildtools-tarball is inherently a tool set instead of a fully functional SDK, so leaving the OECORE_NATIVE_SYSROOT variable in the environment will mess things up. However, we do need a line of 'OECORE_NATIVE_SYSROOT=xxx' in the environment setup script so that the SDK can be extracted and relocated correctly. Thus, instead of exporting OECORE_NATIVE_SYSROOT, we use a comment here. [YOCTO #4939] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05initramfs-framework: fix bashismChen Qi2
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-02packagegroup-core-tools-testapps: isolate x11 dependent toolsRogerio Nunes1
This patch groups x11 dependent tools in a separete variable, and when DISTRO_FEATURES does not contain x11, this group is not included in the package RDEPENDS. Signed-off-by: Rogerio Nunes <rogerio.nunes@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-31dbus: remove build host test in configure scriptJackie Huang2
The dbus build tests the build host to detect what initscript environment it expects. Remove the test and set it to "redhat" unconditionally as the oe-core initscript has a redhat-style pid file path. Signed-off-by: Andy Ross <andy.ross@windriver.com Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
2013-07-31busybox: move /bin/su to /usr/bin/su to match util-linux and shadowHongxu Jia2
Both of util-linux and shadow have su binary in /usr/bin, fix busybox to use the same path so they can be properly tracked by alternatives. [YOCTO #4926] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-31util-linux: use u-a for suHongxu Jia1
Use alternatives mechanism to prevent confliction of attempted installing su binary among busybox, shadow and util-linux. [YOCTO #4926] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-31util-linux: Update for swapoff being a separate binaryColin Walters1
In older versions of util-linux, swapon and swapoff were the same binary, and it did runtime detection. But since v2.22 which is util-linux commit 6cf8d46ceefe9a7, they are separate binaries. This patch is necessary to make the util-linux version of swapoff work at all - currently in OE swapoff = swapon, which is clearly broken =) Probably most OE consumers use the busybox swapoff and hence this has gone unnoticed. Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-30busybox: Add syslog-init alternative only if SysV in enabledMuhammad Shakeel1
If systemd is enabled then syslog is handled through a service file and related files in /etc/init.d are removed. This removes following warning: WARNING: busybox: NOT adding alternative provide /etc/init.d/syslog: /etc/init.d/syslog.busybox does not exist Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-27external-sourcery: add missing providersSaul Wold1
Addess the issue with multiple .bb providers ERROR: Multiple .bb files are due to be built which each provide virtual/libc (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb). This usually means one provides something the other doesn't and should. ERROR: Multiple .bb files are due to be built which each provide virtual/arm-none-linux-gnueabi-libc-for-gcc (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb). This usually means one provides something the other doesn't and should. ERROR: Multiple .bb files are due to be built which each provide virtual/libiconv (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb). This usually means one provides something the other doesn't and should. Thanks to Kergoth (Chris Larson) and Lpapp (Lazslo) [YOCTO #4908] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-27Revert "initrdscripts: mount / as read-only when live-booting"Ross Burton1
My test environment must have been messed up as now hddimgs are failing to re-mount / as read-write. This reverts commit 7af92f8fa3a12fc8fcb22dbd12f87d89768b2d39. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-27util-linux: fix PACKAGECONFIG optionsKoen Kooi1
The ??= operator is too weak and it's setting a non-existent PACKAGECONFIG option ('libpam' instead of 'pam'). Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-27sysvinit: pidof add -m option for lsbinitscriptsHongxu Jia2
When reboot the system on lsb image, some kill processes would print the following message: ... pidof: invalid options on command line! ... The killproc in lsbinitscripts invokes pidof with option -m, but the pidof in sysvinit package doesn't support this. Backport from fedora to add -m option on pidof could fix this issue. [YOCTO #4896] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-26readline: fix importing readline in python with probably escape sequence outputHongxu Jia2
While imports readline in python, if TERM in terminfo is available and it contains the variable 'km' and 'smm', the readline initialization will output the value of 'smm' which is the escape sequence '\E[?1034h'. The issue is caused by gnu readline library which is used by python readline module. The bash-4.3/readline-6.3 has fixed this but it is still on test and not released, so we find the changes and back port to 6.2. Import patch from: http://git.savannah.gnu.org/cgit/bash.git/tag/?id=bash-4.3-alpha [YOCTO #4835] [YOCTO #4732] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-25dbus: add -o option into start-stop-daemon argumentsJackie Huang1
/etc/init.d/dbus-1 use "set -e" to let the script exit when any command failes. This will cause "dbus-1 restart" command can't start dbus when dbus is stopped. so add --oknodo option to let start-stop-daemon exit with friendly return value. Then commands will work well. Signed-off-by: Song.Li <Song.Li@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-22systemd: remove unneeded modprobe.rulesJonathan Liu2
systemd already handles loading kernel modules for new hardware. This also allows blacklisting modules to work properly when creating a .conf file in /etc/modprobe.d containing "blacklist module_name". Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-22initrdscripts: mount / as read-only when live-bootingRoss Burton1
So that the root filesystem can be fsck'd properly, mount it read only. Either initscripts or systemd will re-mount as read-write in early boot. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18eglibc-2.18: Update to latest snapshotKhem Raj2
Works on all supposted qemu machines Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18eglibc-2.18: Remove unused patchesKhem Raj2
These patches are already part of 2.18 eglibc they were copied from 2.17 but never used. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18uclibc: Build ldd/ldcondif/iconv for main uclibc recipeKhem Raj1
Currently these were not building as a result uclibc based systems were missing ldd and any package depending on ldd package were broken since the package was empty. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18buildtools-tarball: testimage needs the mmap python-moduleSaul Wold1
The new testimage class needs the mmap python-module in the buildtools-tarball on machines that use the tarball to provide the correct version of python. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18udev-extraconf: allow users in disk group to write vfat filesystemHongxu Jia1
If filesystem type is vfat, change the ownership group to 'disk', and grant it with w/r/x permissions. The user which belongs to 'disk' group could write the storage. [YOCTO #4004] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18dbus-ptest: Disable python module checkMark Hatle2
Disable the python module check, as the host python modules are not needed for generating the target tests. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18Upstream-Status: Correct capitalizationSaul Wold2
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18busybox: fix ip reference in simple.scriptMark Hatle1
The ip is being installed into /sbin as of the latest busybox. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-12ncurses: add xterm-256color to terminfo-baseSaul Wold1
This is to address the buildtools-tarball still having problems with certain xterms [YOCTO #4835] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-12dbus: upgrade to 1.6.10Cristian Iorga10
dbus-ptest also upgraded to 1.6.10 systemd-address.patch removed; included in upstream. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-11packagegroup-core-tools-profile: exclude systemtap and valgrind for mips64Kang Kai1
systemap and valgrind are not buildable for mips64, so exclude them for mips64 from packagegroup-core-tools-profile. Signed-off-by: Kai Kang <kai.kang@windriver.com>
2013-07-09util-linux: Use PACKAGECONFIG to control pam and system config optionsSaul Wold1
The PACKAGECONFIG will ensure consistent enabling and disabling of the pam and systemd related options for configure and the correct dependencies Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-09glib-2.0: add -march=i486 into CFLAGS automatically when needed.Jackie Huang2
glib configure will check if current gcc need -march=i486, when gcc need -march=i486 but CFLAGS don't have, glib configure will abort and advise the user to add -march=i486. This will break the build process,it's not good for automatic build system. so change this to adding -march=i486 automatically when it is needed. Signed-off-by: Song.Li <Song.Li@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-09eglibc: Update 2.18 recipes to fix ppc/e500 failuresKhem Raj2
This should fix the e500 errors due to bounded pointers removal Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-04 07:51:35 +0000