Age | Commit message (Collapse) | Author | Files |
|
* While working with a new capacitive touchscreen it was found
that the existing udev rule that creates the
/dev/input/touchscreen0 symlink was too restrictive and did not
match the MODALAIS entry for this touchscreen. which is:
MODALIAS=input:b0018v0000p0000e0000-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
* By looking at the input_print_modalias function in the Linux
kernel drivers/input/input.c file and referencing the meaning
of the evbits and attributes of the input_dev structure it seems
that for identification of a touchscreen the match with ,18
which was matching part of the absbit structure is overkill.
* It seems that the absbit entry is used for devices like
touchscreens and if that the the "a" is followed by 0 and 1 this
is sufficient.
* So the logic has now been changed to check for the "e" 0 and 3
values which correspond to EV_SYN and EV_ABS, then check for
the "a" attribute with 0 and 1.
* More information and history for this can be found at:
http://patchwork.openembedded.org/patch/25093/
http://thread.gmane.org/gmane.comp.handhelds.openembedded.core
* This patch mirrors a patch done by:
Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Disable docs creation for now it uses po4a and sgmltools-lite which are
not currently part of OE-Core
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Removed patch that is now included upstream, add DEPENDS on check since it
is now used to create. Additional added PACKAGECONFIG for PAM and --disbale-vlock
License checksum updated to reflect additional Copyright owners names.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Backported patch from upstream
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will allow packages that update kernel modules to run correctly
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use PACKAGECONFIG to add options for ca-certificates, gnutls, and libproxy.
Enable ca-certificates by default as all it needs to know is the right path,
ca-certificates not being installed isn't fatal.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop the ptest patches and instead use --enable-installed-tests, updating
run-ptest to invoke gnome-desktop-testing-runner.
Drop the x32 build patch, upstream has integrated a similar fix.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core commit 75a14923da1ba91eddde47f0907345c19c82d6f0 has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes the following QA error:
ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped
/run
/run/dbus
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During parsing this recipe builds up a list of splash image files,
however it was recording full paths to local files (i.e. the files next
to the recipe) and then in do_compile it was pointing to those instead
of the fetched files in WORKDIR. Fix it to use the fetched files which
has the added benefit of the do_compile signature not changing if the
recipe is moved around.
Fixes [YOCTO #5250].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add makedevs to SDK, to allow simple /dev/ population.
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It seems strange that runlevel always returns 1, The comment says it is
related to sysvinit, but if we enable systemd, sysvinit will not be
installed. and we have created a link for runlevel to systemctl if
systemd is installed.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in
dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change
libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package,
and is installed into ${libdir}/openssh, so we pass it explicitly.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xz is required on the target filesystem since it's needed
to unpack some of the bootstrap packages.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A text editor is needed to examine log files.
Part of [YOCTO #4727] fix.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add useradd, groupadd et.c. since all target packages
which inherits useradd will have a postinstall hook
dependecy against the yocto specific groupadd.
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently do_install_ptest_base is failing because it cannot find
'test' directory in build dir, ${B}. 'test' directory is present in source
dir, ${S}. Same is true for build-aux/test-driver and test/sys.tar.xz.
Also this fixes:
QA Issue: systemd: Files/directories were installed but not shipped
/usr/lib/udev
/usr/lib/udev/rules.d
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since using useradd in sysvinit causes core-image-minimal to
gain shadow utilites instead of using busybox, we add the
shutdown group directly.
[YOCTO #5230]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5233]
Modeled after Chen Qi's fix to [YOCTO #3924] from oe-core commit:
6b6db7b4fb7aa17b8e29076decc830149b9d35bc
init-install.sh: remove unnecessary udev rules file to avoid error messages
/etc/udev/scripts/mount.sh is removed by init-install-efi.sh, but the
udev rules file which specifies the invocation of this script is not
removed, thus causing the error message during a live install:
/etc/udev/scripts/mount.sh: No such file or directory
The /etc/udev/rules/automount.rules no longer works once the mount.sh
script is removed. Remove it to avoid the error message.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #5237]
The current grub.cfg manipulation depends on an existing root=
parameter. If this doesn't exist, the correct root= parameter will not
be added.
Instead, remove any existing root= parameters and add the correct one
explicitly.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With buildtools (which contains Python) installed on a build machine,
glib-2.0's gtester-report script was ending up with the full path to
the installed python binary in the shebang, which when rpm packaging
was used led to this being added as a per-file dependency by rpmdeps for
the libglib-2.0-utils package in which it ends up. This of course broke
do_rootfs when the package was included in the rootfs and had been
restored from sstate from another machine, as happened on the Yocto
Project autobuilder.
We were already trying to sed this script apparently only for the
shebang (since it appears that there are no other paths in the script)
so let's just sed the shebang properly; it also seems sensible to do
this for native as well instead of explicitly trying to exclude that
case.
Fixes [YOCTO #5205].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd-udevd is back in /lib, so revert this change.
This reverts commit 27bb516be433ed9dcde6fe4a17d2429951a010a0.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There would be an error when the TMPDIR is long/deep, for example when
len(TMPDIR) = 350 while our supported longest value is 410:
[snip]
aclocal: error: cannot open xxx
autoreconf: aclocal failed with exit status: 1
ERROR: autoreconf execution failed.
[snip]
Let aclocal use the relative path for the m4 file rather than the
absolute would fix the problem.
Another fix is that we can modify autotools.bbclass to let it use the
relative path rather than the absolute, but I don't think that we have
to do that based on the following 2 thoughts:
* The coreutils is the only recipe which has this issue as far as we
know when len(TMPDIR) <= 410, because it has the most amount of m4
files (more than 400 ones).
* That would impact all the recipes which use autotools.bbclass, and we
are not sure about the side effect, for example, it would break the
build there is a sub-configure.
[YOCTO #2766]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the external USB devices has internal USB hub, which
make them look like "fixed" rather than "removable". And USB
autosuspend does not work with some of these devices resulting
in inoperable pointing device.
Now the code detect these false "fixed" devices by looking at their
parents. If any of their parent is "removable", then USB autosuspend
is not enabled for that device, which keeps the pointing device
functional.
Fixes bug:
[YOCTO #5166]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This CVE patch is actually against Chromium as they ship an internal fork of
libxml2 and breaks ABI. The real issue has been resolved in libxslt 1.1.27, and
we're shipping 1.1.28.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'need' and 'provide' files are there for simpleinit compatability,
according to the comments in these two files.
However, we don't use simpleinit and there's even no simpleinit recipe
in OE. Besides, these two files are not installed.
This patch removes these two unused files.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix indentation in SRC_URI to conform to the indentation convention in OE.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should fix the case where neon code is emitted for machines
which dont have neon unit in the chip
[YOCTO# 5161]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
using update-alternatives to link runlevel from systemctl, as on Fedora 18
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed for the kconfig handling and the merge-config.sh script.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The iso and hddimg share a common concept of 'live image', and they
use the same initramfs and thus the same init. However, that init
script in initramfs made a wrong assumption that the rootfs image
was read-only by itself. This is apparently not true for hddimg.
To make things work as expected, this init script should at least
distinguish between a read-only rootfs image and a read-write one.
This patch adds this ability to the init script. After this change,
the init script would be able to check whether the rootfs image is
read-only or not. If the rootfs image is read-write, the image will
be mounted and then booted directly. No union mounts will be attempted
in this case.
[YOCTO #5164]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we enable "ptest", populate_sdk fails with the following error:
# bitbake core-image-minimal -c populate_sdk
..
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for dbus-ptest-dev:
* dbus-ptest (= 1.6.10-r0) *
* opkg_install_cmd: Cannot install package dbus-ptest-dev.
Disable that dependency.
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So far the rules of check_requirements() is too strict to lead mismatch
when empty lines exist in volatiles.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script was modified to check whether $ID_FS_TYPE is empty before
automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not
set, yet the device should be mounted. Otherwise, when booting an iso
image with runqemu, the boot process hangs at 'waiting for removable
media'.
This patch fixes this problem by first checking whether the block device
is a cdrom.
[YOCTO #4487]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since meta-environment package name was changed to contain MACHINE,
change packagegroup-cross-canadian package name too, in order to be able
to select the proper environment files for a certain machine.
Also, remove the RPROVIDES since adt-installer doesn't really need it.
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the package name contains just the TRANSLATED_TARGET_ARCH.
When compiling the toolchain for two machines, belonging to the same
architecture (for example: qemuarm and beagleboard), this package gets
overwritten and adt-installer repo will contain just one
meta-environment package... This leads to situations like installing the
toolchain for qemuarm and end up with meta-environment package with
beagleboard cpu options.
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|