summaryrefslogtreecommitdiff
path: root/meta/recipes-core
AgeCommit message (Collapse)AuthorFiles
2017-01-16build-appliance-image: support for ToasterJuro Bystricky2
Various changes needed to enable to run Toaster in the Build Appliance: 1. Pre-install packages as specified by the file "bitbake/toaster-requirements.txt" 2. Include pip3 in the image 3. Include tzdata in the image (needed by django) 4. Bump SRCREV to a commit with proper settings.py (ALLOWED_HOSTS) for Django 1.8.16 5. Added README_VirtualBox_Toaster.txt to provide steps for configuring VirtualBox network adapters (NAT or Bridged) and steps to launch Toaster [YOCTO#10767] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16coreutils: upgrade to 8.26Chen Qi8
Add 0001-local.mk-fix-cross-compiling-problem.patch to fix the following cross compiling problem. | Makefile:3418: *** Recursive variable 'INSTALL' references itself (eventually). Stop. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16dbus/dbus-test: upgrade to 1.10.14Chen Qi2
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16musl: Upgrade to 1.1.16+ on masterKhem Raj1
summary of changes http://git.musl-libc.org/cgit/musl/commit/?id=8fe1f2d79b275b7f7fb0d41c99e379357df63cd9 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-09packagegroup-core-tools-profile: exclude valgrind for x32Christopher Larson1
valgrind doesn't seem to support x32 at this time, even in current upstream. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-09zlib: update SRC_URI to fix fetchingJoshua Lock1
Upstream have removed the file from zlib.net as a new version has been released, switch to fetching from the official sourceforge mirror. [YOCTO #10879] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-09meta: use require instead of include when file should existPaul Eggleton3
If the file is expected to exist, then we should always be using require so that if it doesn't we get an error rather than some other more obscure failure later on. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-09gummiboot: Remove/change gummiboot references with systemd-bootAlejandro Hernandez2
After systemd-boot was introduced, its been tested for a while with no major issues being found until now, this patch completely replaces all gummiboot instances with systemd-boot ones, taking the next step into cleaning up systemd-boot/gummiboot. [YOCTO #10332] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-06meta/scripts: Various getVar/getVarFlag expansion parameter fixesRichard Purdie2
There were a few straggling expansion parameter removals left for getVar/getVarFlag where the odd whitespace meant they were missed on previous passes. There were also some plain broken ussages such as: d.getVar('ALTERNATIVE_TARGET', old_name, True) path = d.getVar('PATH', d, True) d.getVar('IMAGE_ROOTFS', 'True') which I've corrected (they happend to work by luck). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-05packagegroup-self-hosted: add opengl to REQUIRED_DISTRO_FEATURESChristopher Larson1
This rdepends on libgl. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-05ifupdown: upgrade to 0.8.16Maxin B. John2
Refreshed the following patch: * inet-6-.defn-fix-inverted-checks-for-loopback.patch Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22ncurses.inc: add v6 binconfig-disabled entriesTrevor Woerner1
Newer host distributions are moving to ncurses6, therefore add entries so the host's ncurses{w}6-config scripts aren't picked up. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22packagegroup-core-standalone-sdk-target: add libsspPaul Eggleton1
If you want to be able to use -fstack-protector then you need the runtime support - you can either write this yourself or use libssp supplied with GCC. If you're using GCC then it seems likely that you'd just be using libssp, so include in the SDK by default; however use RRECOMMENDS just in case it's been disabled or you aren't using GCC. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22initscripts: populate-volatile: suppress read-only-rootfs warningsAndré Draszik1
rm: can't remove '/etc/resolv.conf': Read-only file system ln: /etc/resolv.conf: File exists /etc/default/volatiles contains an entry: l root root 0644 /etc/resolv.conf /var/run/resolv.conf which causes populate-volatile.sh to execute the following in link_file(): if [ -L \"$2\" ]; then [ \"\$(readlink -f \"$2\")\" != \"\$(readlink -f \"$1\")\" ] && { rm -f \"$2\"; ln -sf \"$1\" \"$2\"; }; elif [ -d \"$2\" ]; then ... At the time the image is created, /etc/resolv.conf is already a symlink to /var/run/resolv.conf, but at boot time when populate-volatiles.sh is run, /var/run/resolv.conf doesn't exist, causing it to try to rm -f and ln -sf which of course fails due to the read-only filesystem. [YOCTO #10814] Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22initscripts: populate-volatile: don't run commands in backgroundMans Rullgard1
If commands are run asynchronously they may be completed out of order causing problems if later entries depend on earlier ones. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22systemd: point to correct resolv.conf when resolved is enabledKhem Raj1
latest systemd has changed the resolved defaults which points to 127.0.0.53 port 53 on local network. If someone wants to use host-local IP address then it can be pointed to copy in /lib/systemd Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-19glib-2.0: Upgrade 2.50.1 -> 2.50.2Jussi Kukkonen1
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-12-17dbus-glib 0.106 -> 0.108Zheng Ruoqin2
Upgrade dbus-glib from 0.106 to 0.108 Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-17busybox: add comments to separate Runit from SELinux content in defconfigRobert P. J. Day1
There is no break in busybox's "defconfig" file to show where Runit settings suddenly morph into SELinux settings, so add some comments. (From OE-Core rev: 0fa590ed6c26aa065a9da8edbf65436fa1f6d04f) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-12-17util-linux: 2.28.1 -> 2.29Zheng Ruoqin1
Upgrade util-linux from 2.28.1 to 2.29 (From OE-Core rev: a675e8219f09a92f1c9c9fccce449d0f0753a53f) Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-12-16meta: remove True option to getVar callsJoshua Lock23
getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16systemd: disable 'libdir' QA checkMark Asselstine1
When building systemd with multilib support enabled in your build you will get the following QA warnings (if the 'libdir' QA check is enabled.) WARNING: systemd-1_232-r0 do_package_qa: QA Issue: systemd-dbg: found \ library in wrong location: /lib/systemd/.debug/libsystemd-shared-232.so systemd: found library in wrong location: /lib/systemd/libsystemd-shared.so systemd: found library in wrong location: /lib/systemd/libsystemd-shared-232.so [libdir] Since systemd 231 upstream has included an 'internal' library which they explicitly place in the application specific /lib/systemd directory. You can see some of the discussion about this placement here https://github.com/systemd/systemd/issues/3810 This placement is being picked up by the QA checker since when multilibs are enabled it expects all libraries to be in lib32 or lib64. Since the systemd and systemd-dbg packages don't contain any other libraries we can respect the upstream placement and skip this QA check for these packages. Unfortunately the QA mechanism doesn't allow us to specify individual files so this approach is the best we can do. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16libxml2: Fix more NULL pointer derefsAndrej Valek2
The NULL pointer dereferencing could produced some security problems. This is a preventive security fix. Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16libxml2: fix CVE-2016-4658 Disallow namespace nodes in XPointer points and ↵Andrej Valek2
ranges Namespace nodes must be copied to avoid use-after-free errors. But they don't necessarily have a physical representation in a document, so simply disallow them in XPointer ranges. Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16libxml2: Necessary changes before fixing CVE-2016-5131Andrej Valek2
xpath: - Check for errors after evaluating first operand. - Add sanity check for empty stack. - Include comparation in changes from xmlXPathCmpNodesExt to xmlXPathCmpNodes Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16sysvinit-inittab: fix getty device removalLeonardo Sandoval1
getty devices were not being removed in some cases because device name was not at the end of the line, for example a ttyS1 device: S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102 Removing this limitation allows sed to remove any line containing the device. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-16busybox: allow libiproute to handle table ids larger than 255Lukasz Nowak2
These changes are required for compatibility with ConnMan, which by default uses table ids greater than 255. Signed-off-by: Lukasz Nowak <lnowak@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13glibc: Enable backtrace from abort on ARMYuanjie Huang1
ARM stack frames for abort and raise were limited to the the actual abort and raise call, such as: Obtained 4 stack frames. ./test-app(print_trace+0x1c) [0x10a08] ./test-app() [0x10b3c] /lib/libc.so.6(__default_sa_restorer+0) [0x4adae1e0] /lib/libc.so.6(gsignal+0xa0) [0x4adacf74] This is not terribly useful when trying to figure out what function may have called called the abort, especially when using pthreads. After the change the trace would now look like: Obtained 8 stack frames. ./test-app(print_trace+0x1c) [0x10a08] ./test-app() [0x10b3c] /lib/libc.so.6(__default_sa_restorer+0) [0x4befe1e0] /lib/libc.so.6(gsignal+0xa0) [0x4befcf74] /lib/libc.so.6(abort+0x134) [0x4befe358] ./test-app(dummy_function+0x50) [0x10adc] ./test-app(main+0xd4) [0x10c24] /lib/libc.so.6(__libc_start_main+0x114) [0x4bee7a58] Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13systemd: Backport cgroup fix from 233 to 232Jason Wessel2
There is a critical regression in the default behavior with systemd 232 which prevents lxc, docker, and opencontainers from working properly out of the box. The change was already committed to the systemd 233 code stream. The failure looks like what is shown below. % lxc-start -n container -F lxc-start: cgfsng.c: parse_hierarchies: 825 Failed to find current cgroup for controller 'name=systemd' lxc-start: cgfsng.c: all_controllers_found: 431 no systemd controller mountpoint found lxc-start: start.c: lxc_spawn: 1082 failed initializing cgroup support lxc-start: start.c: __lxc_start: 1332 failed to spawn 'container' lxc-start: lxc_start.c: main: 344 The container failed to start. lxc-start: lxc_start.c: main: 348 Additional information can be obtained by setting the --logfile and --logpriority options. Commit 843d5baf6aad6c53fc00ea8d95d83209a4f92de1 from the systemd git has been backported and can be dropped in a future uprev. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13initscripts: populate-volatile: improve config file parsingMans Rullgard2
This improves the config file parsing to permit blank lines and comments following an entry or preceeded by whitespace. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-08systemd: Upgrade to 232Khem Raj26
* Drop support for rcS.d SysV init scripts. These are prone to cause dependency loops, and almost all packages with rcS scripts now ship a native systemd service. * Drop mount propagation patch, it only happens with libseccomp, OE doesnt enable it * kdbus option has disappeared from configure * Ignore dev-so for PN now since systemd introduced private .so see https://github.com/systemd/systemd/issues/3810 * Add libnss* to PACKAGES_DYNAMIC for libnss-resolve to work correctly * Forward port systemd-boot patches to systemd-232 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-30libxml2: Security fix CVE-2016-5131Yi Zhao2
CVE-2016-5131 libxml2: Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function. External References: https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-5131 Patch from: https://git.gnome.org/browse/libxml2/commit/?id=9ab01a277d71f54d3143c2cf333c5c2e9aaedd9e Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-30busybox: enable fractional sleep argumentsNathan Lynch1
Fractional durations (e.g. 0.5s) for the sleep command are useful and not terribly uncommon in practice, especially in scripts associated with test cases (e.g. mdadm, lttng-tools). Enable FEATURE_FLOAT_SLEEP by default in order to avoid having to patch every instance of a script using a fractional sleep. The busybox binary gains a few hundred bytes in text (armv5e shown): $ size -x busybox.nosuid.{before,after} text data bss dec hex filename 0x89382 0x71d 0x2250 572655 8bcef busybox.nosuid.before 0x8954e 0x721 0x2250 573119 8bebf busybox.nosuid.after Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23musl: Update to latest on masterKhem Raj2
Bobby Bingham (2): treat null vdso base same as missing add s390x port Rich Felker (2): generalize ELF hash table types not to assume 32-bit entries work around gdb issues recognizing sigreturn trampoline on x86_64 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23systemd: systemd should not depend on systemd-containerMax Krummenacher1
Currently systemd depends on systemd-container due to a dangling symlink deployed with systemd. Move the symlink to systemd-container. | DEBUG: systemd contains dangling link /lib/systemd/system/systemd-machined.service | DEBUG: target found in systemd-container Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23glib: remove obsolete gi-exclude patchRoss Burton2
This patch has been superseded by 2907b1 in gobject-introspection, which we're now shipping. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23sysvinit-inittab: make TERM=vt102 on serial consolesAndré Draszik2
This makes more sense than the default TERM=linux (as set by the linux kernel). In addition, when using busybox init, it tries to achieve the same (in a different way). Both agetty, and busybox getty support the terminal type as the last argument. Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23glibc: fix CVE-2016-6323Kai Kang2
Backport patch to fix CVE-2016-6323 of glibc. And remove the section of file ChangeLog which can't be applied. Ref: https://sourceware.org/bugzilla/show_bug.cgi?id=20435 Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23glib-networking: remove intltool dependencyRoss Burton1
glib-networking 2.50 moved away from intltool to modern gettext, so remove the build dependency. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-23readline: Update to version 7.0Fabio Berton4
Remove readline 6.3 patches and config-dirent-symbols.patch already apply on upstream. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15glibc-2.0: Detect pthread_getname_np() before useKhem Raj2
Fixes build with musl Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15initrdscripts: add support for NVME target installJoe Konno2
Add awareness of /dev/nvme* block devices to install scripts. As presently written, installer knows only of /dev/sd* and /dev/mmcblk* block devices. Building upon scaffolding put in place by Awais in... 80ec9f627915 ("initrdscripts: handle mmc device as installer medium") Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15packagegroup: Reduce duplication in MIPS variants.Zubair Lutfullah Kakakhel2
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES variable is defined Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15glibc: Reduce duplication in MIPS variantsZubair Lutfullah Kakakhel1
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES variable is defined Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15fts: Reduce duplication in MIPS variants.Zubair Lutfullah Kakakhel1
Reduce duplication in MIPS variants now that the MACHINEOVERRIDES variable is defined Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06util-linux: add su.1 to update-alternativesRoss Burton1
The su binary is handled by alternatives but the man page wasn't, so installing both util-linux-doc and shadow-doc produces errors. Also use d.expand() to neaten the code. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06busybox/mdev.conf: Ignore eMMC RPMB and boot block devicesMike Looijmans1
eMMC devices may report block devices like "mmcblk0rpmb" and "mmcblk0boot0". These are not actually block devices and any read/write operation on them will fail. To prevent spamming error messages attempting to mount them, just ignore these devices. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06systemd: CVE-2016-7795Chen Qi2
The manager_invoke_notify_message function in systemd 231 and earlier allows local users to cause a denial of service (assertion failure and PID 1 hang) via a zero-length message received over a notify socket. The patch is a backport from the latest git repo. Please see the link below for more information. https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-7795 Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-06build-appliance-image: Fix incorrect PATHJuro Bystricky1
When modifying the PATH variable in .bashrc, double quote characters were used, resulting in expanding the variable $PATH with the value of PATH of the system building the Build Appliance. The original intent was to enter an un-expanded (literal) $PATH. In order to that, one must use single quotes instead of double quotes. [YOCTO#10434] [YOCTO#10504] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-31glib-networking: Upgrade 2.48.2 -> 2.50.0Jussi Kukkonen1
Six-monthly feature release, mostly bug fixes. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-20 17:11:20 +0000