| Age | Commit message (Collapse) | Author | Files |
|---|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
strings, gperf
* with external toolchain I have different HOST_PREFIX and HOST_SYS
AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy
then it tries objcopy without prefix which is found on host, but
that objcopy does not work for arm libs
* with internal toolchain gperf is not prefixed with HOST_PREFIX, but
fallback to "gperf" only finds the one in native sysroot first
* based on http://lists.linuxtogo.org/pipermail/openembedded-core/2013-April/037985.html
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The install boot option was giving the following error when one tried to
install the live image on a permanent storage of a BSP.
cat: write error Invalid argument
Installation image failed
sh: can't access tty: job control turned off
Further digging into the issue, found out that the install script was trying
to do this:
cat /proc/mounts > /etc/mtab
And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts.
So the cat command was failing to write on /etc/mtab. As the contents of
the /proc/mounts is already reflected in the /etc/mtab file due to the
symlink-ing, there is no need for this step to recreate /etc/mtab in the
install script. So just removing this unnecessary step, which solves the
install issue of the live images.
Fixes this bug:
[YOCTO #4229]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New coreutils (8.15 onwards) build /usr/bin/realpath, which busybox also builds.
Add it to the alternatives handling to avoid file conflicts.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
init-live.sh depends on udev performing automounting, which happens in
udev-extraconf. Explicitly depend on it so that we always have it installed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using busybox mount the filesystem won't get remounted as 'rw' and bootup will fail.
This fixes the regression seen after switching from 'danny' to 'dylan'.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add back inetd and inetd.conf files which are needed if
CONFIG_INETD is enabled in the defconfig. Grabbed these
files from oe-classic
This patch is based on the previous patch for denzil:
http://patches.openembedded.org/patch/33235/
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After using 'bitbake -c menuconfig busybox' to customize defconfig,
do_install fail to detect the changes. Grep configs in ${B}/.config
instead of ${WORKDIR}/defconfig.
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In each of these cases allarch is used where the package in question has a
dependency on things which are not allach and change when MACHINE is changed.
This leads to a rebuild of the package each time MACHINE is switched and
the sstate checksum changes. The dependencies in question are not suited
be being marked as ABISAFE.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will silence some of the noisy output from mount.util-linux and the kernel
when trying to automount filesystems or devices. Busybox does not accept the silent
option, it uses a loud option instead.
[YOCTO #3935]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As per the previous commit, systemd-udevd is now in /sbin/systemd/.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As with udev, placing binaries in /lib breaks our current multilib
implementation. Change the rootlibexecdir to /sbin/systemd so that binaries
don't move in multilib situations.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed because the udev_182 now requires devtmpfs and will not work correctly
with out, so ensure that the kernel contains devtmpfs by checking /proc/filesystems.
[YOCTO #4125]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using util-linux-uuidd in SYSTEMD_PACKAGES use ${PN}-uuidd, as in
multilib configurations util-linux-uuidd doesn't exist.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise in multlib builds the wrong name is used and files don't get packaged
correctly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the upgrade to version 199 the location for systemd-analyze has change
this caused the systemd-analyze package to be empty and the binary was
shipped with the systemd package instead.
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mount /var/volatile ourselves so that we can set up the writable area
first. This fixes the urandom service not starting properly when
read-only-rootfs is enabled.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Unionfs isn't available everywhere, and we can get similar results (if
not quite as neatly) by using bind mounts + tmpfs and copying the data
over.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
switch from using plain update-alternatives command to
update-alternatives.bbclass style
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current behaviour of busybox is to try all fstype when automounting
even when no media exists. The util-linux mount command bails when no
media exists, so change the behaviour of busybox to do the same.
It could also be argued that the KERN_INFO message from btrfs could be
removed, but that would be harder to accomplish.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For better or worse we need to use base_sbindir for udev's libexec dir. This
updates the initrdscripts to also cover the new location. I'd prevously assumed
that it was already covered but its not. udev internal binaries shouldn't be in
PATH so we have to do this to deal with the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Ensure we can update the script base don the location of the udevd installation
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Along with v182 upgrade udevd was moved to ${base_libdir}
making scripts like init-live.sh to fail in finding udevd.
We have some problems here since the placing binaries into either
libdir breaks the way our multilib handling works. That code and its
associated sanity tests assume that libdir contains binaries of a
particular architecture and that these are not allowed to overlap.
This is in contrast to the bindirs where conflicts are expected
and handled appropriately.
So whilst upstream may desire this directory layout, it won't work
for OE's usage of it and we need to configure udev differently. The
scripts already have fallback code to handle udev in the two locations
so there is no issue is going back to our previous layout.
[Yocto #4046]
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After some breakage in udev the kernel gained direct firmware loading.
For older kernels (e.g. 3.2 in my case) udev still needs to load the
firmware. Firmware loading is enabled once a default firmware path is
set. Apply a compile fix from the upstream project.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In glibc 2.17, crypt() now expects 2 valid chars for the seed or
it will error out and return a NULL. The tinylogin code took the
result from crypt directly into a strcmp() which caused a segfault
Tinylogin has been deperacted, busybox now has login support, I will
investigate using busybox login support for 1.5.
[YOCTO #4097]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fixes udev configure in run-postinsts failing with:
update-rc.d: /etc/init.d/dbus-1: file does not exist
because dbus-udev is installed only with sysvinit in features
but update-rc.d was always called from PN postinst
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fixes udev configure in run-postinsts failing with:
update-rc.d: /etc/init.d/systemd-udev: file does not exist
because systemd-udev is installed only with sysvinit in features
but update-rc.d was always called from PN postinst
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO 4164](2/3)
Add all /dev/input/* devices to the input group with g+rw. This is
needed for rootless X without adding a security hole by making the
device o+rw.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Saul Wold <sgw@linux.intel.com>
Cc: Radu Moisan <radu.moisan@intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes [YOCTO 4164](1/3)
Add input group for the /dev/input/* devices. This is needed for
rootless X without adding a security hole by making the device o+rw.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* when enable busybox installs getopt to ${base_bindir} and
util-linux to ${bindir}, so there is no file conflict, but
because busybox implementation does not support --long used
by lsb_release (which RDEPENDS on util-linux) we need to use
util-linux getopt even when busybox defconfig has it enabled
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Package additional directories e.g. /etc/kernel and /usr/lib/kernel
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
remove-gets.patch removed as issue is fixed upstream.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dbus-ptest recipe doesn't produce an output package called
dbus-ptest. What we are interested in is actually the dbus-ptest-ptest
package.
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/etc/udev/scripts/mount.sh is removed by init-install.sh, but the udev
rules file which specifies the invocation of this script is not removed,
thus causing the error message '/etc/udev/scripts/mount.sh: No such file
or directory' shown at a live install.
The /etc/udev/rules/automount.rules no longer works once the mount.sh script
is removed. So we remove it to avoid the error message.
[YOCTO #3924]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
udevadm is now moved from /usr/bin to /bin so account for that
bash completions for udevadm should be packages with udev-utils
since thats where udevadm itself is, they were in systemd package
which is not correct location for it
Backport patches for readahead fixes on spinning disks
and to tackle error reported on missing /etc/sysctl.conf
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tested on ppc and x86_64
compile tested for uclibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes races in build over these dependencies which could become
accidentally enabled.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recent change in the builddir location is breaking this recipe as
it is trying to run a script (make-image-header.sh) located in sourcedir
from builddir. As the script does not gets to run, the resulting file is
not generated causing error as seen below. This commit fixes the issue, by
providing complete path of the script.
This commit fixes this build error:
ERROR: Error executing a python function in /srv/home/nitin/prj/poky.git/meta/recipes-core/psplash/psplash_git.bb:
IOError: [Errno 2] No such file or directory: 'psplash-tlk-img.h'
ERROR: Task 6 (/srv/home/nitin/prj/poky.git/meta/recipes-core/psplash/psplash_git.bb, do_compile) failed with exit code '1'
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, psplash didn't go away at system startup.
The root cause is that rc checks the file '/etc/init.d/xserver-nodm' to
determine whether to exit psplash manually. So even if xserver-nodm is not
linked into runlevel 3, psplash doesn't exit.
This patch fixes this problem by letting the rc script check the file
'/etc/rc${runlevel}.d/S??xserver-nodm' to determine whether to exit psplash
manually.
[YOCTO #3904]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
debugedit from rpm has unearthed a bug in uclibc
where it was mixing stabs with elf/dwarf
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
initscripts is generally installed on systemd-using images, but because it
specifies that /run is a symlink to /var/run managed by volatiles it totally
breaks systemd by copying/deleting /run from underneath systemd. Deleting
sockets mid-boot doesn't leave systemd in a happy place.
As this volatile reference of /run was introduced by udev 182, move it's
reference to the udev recipe. This way it will never be present on systemd
images, as systemd manages /run as a tmpfs itself.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If systemd isn't a distro feature, explicitly disable the systemd unit path
check as otherwise it will search the sysroot.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These are more than useful as they ensure some services are not started twice,
and cause the first-boot postinstalls to run.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
|
|
For hybrid systemd/sysvinit builds, only one fstab can be used.
The default fstab used by sysvinit should work fine with systemd.
Since virtually every machine will ship its own fstab in its bsp
layer, the bsp layer may decide how to override the fstab based
on distro features.
This reverts commit 77bbb839ba25b974a538b90d346b454ccd5deefd.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Don't follow DISTRO_FEATURES_INITMAN as that makes the packagegroups rebuild if
you switch init manager.
As in hybrid situations there's generally a clear primary and minimal init
manager choice, so change VIRTUAL-RUNTIME_init_manager to set the primary init
manager, and roll your own groups/images for the secondary.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With both sysvinit and systemd features it's possible to use systemd's udev with
sysvinit, so add the required init script.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
