summaryrefslogtreecommitdiff
path: root/meta/recipes-core
AgeCommit message (Collapse)AuthorFiles
2013-07-05busybox: upgrade to stable 1.21.1Chen Qi20
Merged or backported patches are dropped. The wget_dl_dir_fix.patch was submitted more than 1 year ago, it's about the -P option behavior, and it's not accepted, so I dropped this patch too. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05util-linux: disable runuser by default since it depends on PAMSaul Wold1
util-linux's configure checks for pam_misc.h and if it finds it will enable runuser, there was a case where it was found via shared state and then got rebuilt. This makes the build more deterministic. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05eglibc: Drop libc-libm-bigKhem Raj1
This feature has been removed from eglibc 2.18 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05eglibc: Add 2.18 recipesKhem Raj35
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05packagegroups: Update for split mc packagesSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05udev-extraconf: blacklist /dev/dm-*Jackie Huang1
Do not mount /dev/dm-* by default via udev, this is the default behavior for most distos and WRLinux4.x. This resolved a problem with the sanity test failing due to seeing the error while attempting to mount new logical volumes without fs. Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05busybox: fix the on-target upgrade problemChen Qi1
We now can have a 'one-binary' version of busybox, or 'two-binary' version of busybox, controlled by the 'BUSYBOX_SPLIT_SUID' variable. This makes on-target upgrade a problem, as we have to support the following four upgrading paths. For convenience, in the following context, A is used to denote a 'two-binary' version of busybox while B is used to denote a 'one-binary' version of busybox. A --(upgrade)--> B B --(upgrade)--> A A --(upgrade)--> A B --(upgrade)--> B This patch makes effort to support the above four situations. [YOCTO #4802] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-05init-ifupdown: set kernel parameters firstlyJackie Huang1
When do ipv6 ready test, some DAD (duplicate address detect) tests failed since it expect IPV6 will be disabled, but not. even accept_dad has been set to correct value 2. Further investigation shows the root cause is that setting the kernel parameter happens after the NIC is upped. Make kernel parameters be configured before the interfaces is upped, and duplicate setting the kernel parameters does not have negative effect. Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02udev: Add RRECOMMENDS for udev-cache to enable the cacheSaul Wold1
This will enable the udev cache for sysvinit systems, which does improve post-first boots. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02uclibc: Remove 0.9.33 recipesKhem Raj19
git recipes are stable enough and contains the fixes needed to run with modern systems e.g. systemd etc. Drop 0.9.33 We already use git as default. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02uclibc: Update to latest git/master versionKhem Raj9
Use kernel cfg management infra to manage kconfig fragments. Add fragments for locale and obstrack and enable them by default Drop aplready applied patches Drop DP = -1 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02base-files: remove the unnecessary /media/xxx directoriesChen Qi2
A few directories under /media were created by default, /media/card, /media/ram, /media/realroot, etc. These directories actually have no real usage now, thus removing them. The /media/ram entry in the fstab is also removed, as mounting a tmpfs over /media/ram in our system brings no benefit. Note that a duplicate '/mnt' entry in dirs755 are also removed. [Yocto #4774] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02udev-cache: take a read-only rootfs into considerationChen Qi2
In case of a read-only rootfs, we skip the process of generating udev cache, as the data cannot be persisted between reboots. However, it's possbile that the $DEVCACHE (default to /etc/dev.tar) exists in a read-only rootfs, no matter how it's generated or installed. In such situation, we try to use $DEVCACHE if possible. Besides the basic changes in the logic of udev cache handling, this patch also adds code to output more information if the udev cache is not used and VERBOSE enabled. This patch also changes the readfile function to readfiles function so that it could handle more than one file at once. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02packagegroup-self-hosted: add python-gitPaul Eggleton1
python-git is needed by buildhistory-diff, so add it to this packagegroup allowing buildhistory-diff to be used within build-appliance-image. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-02buildtools-tarball: add python-gitPaul Eggleton1
python-git is needed by buildhistory-diff and the OE layer index update script, and on machines where buildtools-tarball is necessary given we are providing python we must provide this module as well. Fixes [YOCTO #4747]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-28init-live.sh: try to make a union mount when possibleChen Qi1
This patch tries to make a union mount in live image. For example, if aufs is enabled with the aufs-enable.scc configuration fragment, the init-live.sh script will use aufs to make a union mount. Although overlayfs is not supported by Yocto kernel yet, this patch still takes it into consideration with the expect that the related code should at least serve as a placeholder. [YOCTO #1487] [YOCTO #4761] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-28initrdscripts: unionfs cleanupChen Qi2
The unionfs has been disabled for more than a year and it's not going to be used any more. This patch cleans up the unionfs related code. [YOCTO #4761] [YOCTO #1487] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-27systemd: Ensure that we mount devtmpfsSaul Wold1
Since systemd also used tmpfs we should make a similar patch for the systemd-udev script Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632 Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan is now using udev 182. This means /dev is now required to be a devtmpfs filesystem (maintained by the kernel). If the root filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't activate since there is no rootfs to actually mount... The bug causes an unusable system as /dev doesn't contain even basic nodes required to even get a login prompt. The Yocto udev/init script mounts tmpfs if it does not detect tmpfs or devtmpfs mounted at /dev. This appears to be outdated logic that is no longer correct. I believe the Yocto udev init script should be checking and mounting only 'devtmpfs' on dev. Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com> [YOCTO #4632] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-27udev: only use devtmpfs for udevAlex Olson1
Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632 Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan is now using udev 182. This means /dev is now required to be a devtmpfs filesystem (maintained by the kernel). If the root filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't activate since there is no rootfs to actually mount... The bug causes an unusable system as /dev doesn't contain even basic nodes required to even get a login prompt. The Yocto udev/init script mounts tmpfs if it does not detect tmpfs or devtmpfs mounted at /dev. This appears to be outdated logic that is no longer correct. I believe the Yocto udev init script should be checking and mounting only 'devtmpfs' on dev. Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com> [YOCTO #4632] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-27dbus-ptest: Install missing filesAdrian Dudau2
Install files from EXTRA_DIST needed for some tests. Add configure parameter with-dbus-test-dir to specify where the test tools are located. Signed-off-by: Adrian Dudau <adrian.dudau@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-27init-live.sh: fix automount failed occasionallyHongxu Jia1
Reboot system repeatedly, occasionally found usb automount failed, a low probability but it happens. $ df Filesystem 1K-blocks Used Available Use% Mounted on none 1024972 4 1024968 0% /dev /dev/sda3 7689384 3540940 3757840 49% /media/sda3 /dev/sda2 146127424 1238432 137466120 1% /media/sda2 /dev/sda1 17845 14570 2354 86% /media/sda1 /dev/sdb 293400 288560 4840 98% /media/sdb /dev/sdc4 457632 32 457600 0% /media/sdc4 /dev/sdc1 475018 2321 447749 1% /media/sdc1 /dev/sdd 1382298 1382298 0 100% /media/sdd /dev/sdc2 475694 2320 448374 1% /media/sdc2 /dev/loop0 270649 181249 75644 71% / df: /media/sdc3: No such file or directory tmpfs 1029352 0 1029352 0% /dev/shm tmpfs 1029352 2816 1026536 0% /run tmpfs 1029352 0 1029352 0% /sys/fs/cgroup tmpfs 1029352 4 1029348 0% /tmp tmpfs 1029352 0 1029352 0% /media/ram tmpfs 1029352 116 1029236 0% /var/volatile When boot media has been found, udev will be killed. If udev is busy to mount other medias at the killing time (especially medias is many), the above issue will occur occasionally. Invoke `udevadm settle' before killing udev will resolve this issue, it watches the udev event queue, and exits if all current events are handled. Use variable `_UDEV_DAEMON' to replace hardcoded `udevd' to keep consistent with previous. [YOCTO #4745] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25base-files: create /usr/lib/locale dirRoy.Li1
Lsbtest shows that /usr/lib/locale dir is lost, so create it Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-25buildtools-tarball: Add nativesdk-makeMark Hatle1
Recently it was discovered that many Fedora hosts have a broken version of make 3.82. Add make to the buildtools-tarball, as well ad modify make to support building a special nativesdk version. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: Add ptestBjörn Stenberg3
Install busybox test suite and run it as ptest. Signed-off-by: Anders Roxell <anders.roxell@enea.com> Signed-off-by: Björn Stenberg <bjst@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25buildtools-tarball: Change the way the SDK is sanitizedMark Hatle1
The previous method of shrinking down the scale of the environment-setup file would not work properly when the target is configured with multilibs. In addition, the configured machine name and similar settings could leak into the SDK naming. This was resolved by clearing the SDK generated files and generating our own custom files. Note, the name of the environment-setup now is suffixed with the SDK_SYS. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25systemctl: Support all unit types in the directives.Randy Witt1
The Alias and WantedBy directives can accept all valid unit types when using the systemctl from systemd. And since the systemctl script should match the behavior of systemd as much as possible, add the current set of unit types listed at http://www.freedesktop.org/software/systemd/man/systemd.unit.html to the Alias and WantedBy directives. The deficiency was exposed when trying to use: Alias=default.target in a foo.target. No symlink was created by running "systemctl enable foo.target" during the package's postinst. Signed-off-by: Randy Witt <rewitt@declaratino.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25udev-cache: fix to use udev-cache correctlyChen Qi3
Previouly, the udev-cache has no real effect even if it's installed into the system. The key problem here is that at first boot, the /etc/dev.tar is not present, thus resulting /dev/shm/udev.cache not created on first boot even if udev-cache is enabled. This patch fixes this problem. The /dev/shm/udev.cache will be created if necessary, that is, on first boot or when some part of the system is changed. In the latter case, the udev cache may not be valid. [YOCTO #4738] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25tinylogin: remove recipeChen Qi9
tinylogin has been deprecated and the functionality ported into busybox. We now use busybox as the login manager, so the tinylogin recipe could be deleted. [YOCTO #4207] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25packagegroup-core-boot: use busybox as the default login managerChen Qi1
tinylogin has been deprecated and the functionality ported into busybox, so we switch to using busybox as the default login manager. [YOCTO #4207] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: add the ability to split the busybox binaryChen Qi1
This patch enables us to split the busybox into two binaries, one containing suid applications, and the other containing nosuid apps. Add a variable, BUSYBOX_SPLIT_SUID, to control whether to split the busybox binary into two parts. We default it to "1" to enable the splitting, but users could still override it to disable the splitting. After all, busybox has no internal support for this suid apps splitting, so there might be users out there who want just one busybox binary. The basic idea here is to build the busybox twice, each with the correct configuration items. We extract the non-app part of the original .config file, and merge this part with the suid-app part to form a .config which contains only suid apps. The same strategy applies to the non-suid apps. [YOCTO #4207] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: enable to list suid and non-suid app configsChen Qi2
This patch, written by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>, adds the ability to busybox to list configuration items of suid apps and non-suid apps separately. `make busybox.cfg.suid' generates a file containing config items of the suid apps. 'make busybox.cfg.nosuid' generates a file containing config items of the non-suid apps. This patch helps to separate busybox into two binaries, the suid one and the non-suid one. [YOCTO #4207] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: add a config fragment to enable login utilitiesChen Qi2
Create a config fragment to enable the login/passwd utilities of busybox. [YOCTO #4207] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: add support for CONFIG_FEATURE_INDIVIDUALChen Qi1
Previously, if CONFIG_FEATURE_INDIVIDUAL was enabled for busybox, yocto-based systems could start correctly. This is because if busybox is built as individual apps, '/bin/busybox' may not be present, so setting the default ALTERNATIVE_TARGET to '/bin/busybox' is not appropriate and could lead to errors. This patch fixes this problem by checking the existence of '/bin/busybox' before setting the ALTERNATIVE_TARGET to '/bin/busybox'. After this change, if busybox is built as individual apps, we'll have links like '/bin/ls -> /bin/ls.busybox', otherwise, we'll have links like '/bin/ls -> /bin/busybox'. Note there's a grep expression change in this patch. The old expression doesn't work well, it has an unwanted underscore, so I changed it to make it work. [YOCTO #4570] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-25busybox: remove the postinst part of the recipeChen Qi1
Remove the pkg_postinst_${PN} from this recipe, as it's redundant. It basically wants to do the same thing as the update-alternatives does. But it doesn't do it well. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-24Sync with PRINC removal from meta-intelRichard Purdie2
PRINC usage is removed from meta-intel, bump core PR values to ensure no version regressions. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-21psplash: Bump PR to allow removal of PRINC from meta-yoctoRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-18systemd-udevd: fix invoking init script failedHongxu Jia1
root@emenlow-noemgd:~# /etc/init.d/systemd-udevd restart Stopping udevd Starting udev corrupt queue file root@emenlow-noemgd:~# /etc/init.d/systemd-udevd status udevd is stopped root@emenlow-noemgd:~# ps 3805 root 8728 S /lib/systemd/systemd-udevd The process name is systemd-udevd rather than udev which is used in systemd-udevd's init script. [YOCTO #4746] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-17dbus-wait: Upgrade to fix typoRichard Purdie1
There was a typo, the fix was merged upstream, this patch updates to the new SRCREV. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-14buildtools-tarball: Add nativesdk-ncurses-terminfo-baseRichard Purdie1
We've been seeing issues where some TERM values don't work well with the tarball. These show up as escape codes coming from simple python calls such as printing the python version. Adding the terminfo goes part way to addressing the problem, the remainder is ensuring the relocation code correctly searches the right path for it (which will be in a follow on patch). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-14systemd: update install-quotaon-once.patchRoss Burton1
This patch has been merged upstream now, so refresh the patch with a backport (the patch was changed before being merged). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-13util-linux: update to 2.23.1Jonathan Liu3
Removed patches integrated upstream. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-11buildtools-tarball: add difflib and pprint python modulesSaul Wold1
Needed for the unittest part of bitbake-selftest can work correctly. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-11packagegroup-base: s/dosfsprogs/dosfstools/Christopher Larson1
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-11systemd: don't install quotaon.service twiceRoss Burton2
If the same file is installed twice there's a race which can lead to "make install" failing. Remove the redundant installation of quotaon.service to eliminate the race. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-11packagegroup-core-tools-profile: don't exclude mipsChristopher Larson1
Now that liburcu supports mips, this packagegroup can pull in lttng recipes (lttng-ust, lttng-tools, lttng-modules, babeltrace) on that architecture as it does for the others. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-11packagegroup-base-vfat: include dosfsprogsChristopher Larson1
The ext2 group includes e2fsprogs, so this is consistent and should be appropriate, I think. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-11glib-2.0: drop Makefile.in hunks from patchRoss Burton1
Patching a generated file is prone to conflicts, and we'll be replacing this file anyway when configuring, so drop the Makefile.in hunks. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-06-10core-image-minimal: do not remove packaging files in the rootfs postprocessLaurentiu Palcu1
Since the removal of PM's meta-data was moved in image.bbclass, after rootfs_*_do_rootfs() runs, there's no need to remove the files in rootfs postprocess stage. Also, if the meta-data is removed then there's no way we can save the postinstalls to /etc/(deb|ipk)-postinsts later. For RPM, it doesn't really matter since the postinstalls are saved to /etc/rpm-postinsts as soon as the postinstall fails. [YOCTO #4484] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-10libxml2: added python dependency to nativesdkFelipe F. Tonello1
This is necessary since libxml2 has python dependency. This patch will fix this error: ... /path/to/build/system/4.7.2/ld: cannot find -lpython2.7 ... ERROR: Task 4152 (virtual:nativesdk:meta/recipes-core/libxml/libxml2_2.9.0.bb, do_compile) failed with exit code '1' Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-10init-live.sh: fix media automount failed after booting from usb-driveHongxu Jia1
1, This issue happens to BSP only. After a BSP board is booted with Yocto linux from USB drive, "cat /proc/mounts" shows: ... /dev/sda3 /media/sda3 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0 /dev/sda1 /media/sda1 ext3 rw,relatime,errors=continue,barrier=1,data=ordered 0 0 /dev/sda2 /media/sda2 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0 ... but actually the directory /media/sda1 doesn't exist at all, "df" shows: ... df: /media/sda3: No such file or directory df: /media/sda1: No such file or directory df: /media/sda2: No such file or directory ... 2, This is because the mount data comes from proc setup during early boot before the change root, which then uses a different root filesystem, the media is not in the new root filesystem. 3, During early boot before switch_root, use `mount --move' to move all medias to the new root filesystem could also fix this issue. [YOCTO #2064] [YOCTO #3705] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 08:58:19 +0000