summaryrefslogtreecommitdiff
path: root/meta/recipes-core
AgeCommit message (Collapse)AuthorFiles
2015-08-29systemd: Increase devices timeout in QEMU machines to avoid failures on ↵Aníbal Limón2
serial-getty Systemd serial-getty is failing because dev-tty ends with timeout, systemd uses a default timeout of 90 secs that it's reached on AB's production environment due to high I/O loads (nfs). When use QEMU is used without KVM support, the machine code is executed by TCG (software code execution) that is dependent on devices layer and causes locks between TCG/Devices increasing the machine code execution time [1]. QEMU don't support configuration of device timeout always uses a default one that is 90 secs, so the next patch increases the device timeout to 240 secs [2] in order give enough time to get devices ready. It ONLY applies on QEMU machines. [YOCTO #8141] [1] http://blog.vmsplice.net/2011/03/qemu-internals-overall-architecture-and.html [2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8141#c10 Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-29sysvinit-inittab: Run ttys on ttys that don't have tty in the nameRandy Witt1
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0. Since that doesn't have tty in the name, a correct label didn't get added to inittab. This change makes both names with tty and without work. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-24glib: add a warning suppression patch to glibAlexander Kanavin2
Otherwise QA check will fail. Some schemas in gsettings-desktop-schemas (such as proxy and locale) are still using deprecated paths, as of 3.16.1. This causes warning messages, and meta/lib/oe/rootfs.py complaints about them. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-24classes/gnomebase: change tarball compression to xzAlexander Kanavin1
Upstream, xz has been the only format for some time now, so let's make it the default and adjust recipes that package old stuff. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-24glibc: use cross-rpcgen to replace host's rpcgenRobert Yang1
There might be unexpected errors when use host's rpcgen. [YOCTO #8181] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-19glibc-package: use ${PN} in INSANE_SKIPMartin Jansa1
* INSANE_SKIP_${PN}_append_aarch64 is causing following warning in some setups: WARNING: Variable key INSANE_SKIP_${PN} () replaces original key INSANE_SKIP_glibc (). * in worst case this will be applied also for glibc-initial package which is using the same glibc-package.inc, but glibc-initial doesn't create any packages so we should be fine * someone building for aarch64 should confirm verify that this INSANE_SKIP is still needed and cannot be fixed properly it was introduced in: commit aeb6f53dd607ceb0d2265a05c27f751109c73752 Author: Mark Hatle <mark.hatle@windriver.com> Date: Thu Dec 18 16:51:13 2014 +0800 glibc-package: aarch64 enable symlink for ABI compliance aarch64 requires the ld.so to be present in /lib, even if the rest of the libraries are installed into an alternative directory. See: https://sourceware.org/glibc/wiki/ABIList Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-19packagegroup-core-standalone-sdk-target: remove qemuwrapper-crossRobert Yang1
Remove qemuwrapper-cross from RDEPENDS, install a cross pkg in sysroots isn't useful, if we really need run qemuwrapper in SDK, we should add it as nativesdk, and it has multilib conflicts when populate_ sdk: error: file /usr/bin/crossscripts/qemuwrapper from install of qemuwrapper-cross-1.0-r0.lib32_x86 conflicts with file from package qemuwrapper-cross-1.0-r0.core2_64 [YOCTO #8089] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-19uclibc: Upgrade to tip of masterKhem Raj23
Drop upstreamed patches convert the rest to git am'able patches Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-19glibc: Consider adding -Wno-error in cases when not using -O2Khem Raj1
glibc has recently turned on Werror globally which is good but then not all option combos are well tested so there still remains cleanup needed when not using -O2, so lets just disable Werror in such cases, until fixed upstream Change-Id: I2d491c360a15b0752c97ff77ee0faaeede6e8d2a Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-16glibc: Package libmvec when builtKhem Raj1
libmvec is new library in glibc 2.22 and currently turned on by default on x86_64. this helps in packaging it properly when its generated Fixes warning like WARNING: QA Issue: nativesdk-glibc: Files/directories were installed but not shipped in any package: /usr/local/oecore-x86_64/sysroots/x86_64-angstromsdk-linux/lib/libmvec-2.21.90.so Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. [installed-vs-shipped] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-16glibc: Upgrade 2.21 -> 2.22Khem Raj47
- git'ify the OE patches - add_resource_h_to_wait_h.patch - dropped, we do not support that old perf anymore - mips-rld-map-check.patch - Dropped because binutils is fixed for it see https://sourceware.org/ml/binutils/2011-12/msg00112.html - initgroups_keys.patch - Folded into 0026-eglibc-Forward-port-eglibc-options-groups-support.patch Change-Id: Ib8e731b212f52b8ff12e2180babbc19970fb1ef1 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-16build-appliance-image: use ext4 for rootfsJuro Bystricky1
Changes due to IMAGES_FSTYPES "vmdk" and "vdi" now defaulting to ext4. Switching Build Appliance to Ext4 will bring it more in-line with other BSPs. [YOCTO #8096] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-16systemd: update SRC_URIRoss Burton1
Upstream has moved git hosts, so update the SRC_URI appropriately. [ YOCTO #8181 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-14uclibc.inc: remove unused UCLIBC_EXTRA_LDFLAGSAndre McCurdy1
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-11packagegroup-core-sdk: Disable sanitizers on muslKhem Raj1
sanitizers assume linux == glibc :( Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-08-09uclibc: backport upstream fix for SH4Andre McCurdy2
Backport upstream fix for building uclibc for SH4 with recent gcc: http://git.uclibc.org/uClibc/commit/?id=2c8a7766681b704e710f51c0817534e3f9a952d1 Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gettext_0.16.1: add -lrt and -lpthread to LDFLAGS for uclibc buildsAndre McCurdy1
Fix linker errors due to posix_spawnp etc being in librt for uclibc. | sh4-rdk-linux-uclibc-libtool: link: sh4-rdk-linux-uclibc-gcc -ml -m4 --sysroot=/build-foo/tmp/sysroots/foo -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/test-names test-names.o libuniname.a ../gnulib-lib/.libs/libgettextlib.so /build-foo/tmp/work/sh4-rdk-linux-uclibc/gettext/0.16.1-r6/build/gettext-tools/intl/.libs/libintl.so -lc /build-foo/tmp/sysroots/foo/usr/lib/libiconv.so | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawnp' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_adddup2' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_addopen' | ../gnulib-lib/.libs/libgettextlib.so: undefined reference to `posix_spawn_file_actions_addclose' | collect2: error: ld returned 1 exit status Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09gettext_0.16.1: remove obsolete uclibc specific patchAndre McCurdy2
gettext-error_print_progname.patch was originally created for gettext v0.14.6 and does not apply cleanly to gettext v0.16.1. Since the original issue addressed by the patch isn't documented and because gettext v0.16.1 seems to be build OK for uclibc without the patch, assume the patch is obsolete and no longer required. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-09initscripts: Fix regression for requiring /bin/bashJason Wessel1
It is not possible to create a rootfs with only busybox + initscipts. This is a result of a regression from commit a4b53872a8a9a2743299acbff015f7f2750a69d6 (initscripts: add /sbin/sushell for systemd service debug-shell). The /sbin/sushell should just use /bin/sh else you end up with a problem when creating the end image with a failed smart transaction shown below: ERROR: Unable to install packages. Command '/proj/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/smart --quiet --data-dir=/proj/bitbake_build/tmp/work/qemuarma9-wrs-linux-gnueabi/wrlinux-image-glibc-small/1.0-r1/rootfs/var/lib/smart install -y dropbear@armv7at2_vfp hac@armv7at2_vfp run-postinsts@all kernel-modules@qemuarma9 packagegroup-core-boot@qemuarma9' returned 1: error: Can't install initscripts-1.0-r155.0@armv7at2_vfp: no package provides /bin/bash Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: enable support for sha1sum and sha256sum appletsAndre McCurdy4
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: support mount via label for btrfs and squashfsAndre McCurdy4
Also move the mount via label (and mount via UUID) support into its own config fragment and disable volume ID support for less common filesystem formats exFAT and NILFS. Following this commit, mount via label is supported for btrfs, ext, f2fs, fat and squashfs. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: disable fatattr in defconfigAndre McCurdy1
The fatattr applet (to display or change file attributes on a fat file system) doesn't seem to be core functionality, so disable by default. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: disable sha3sum in defconfigAndre McCurdy1
The sha1sum, sha256sum and sha512sum applets have not historically been enabled by default, so don't enable sha3sum either. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: refresh defconfig for busybox v1.23.2Andre McCurdy1
The current oe-core busybox defconfig dates back to busybox v1.20.2, so configure options introduced in busybox v1.21.x, v1.22.x and v1.23.x take on default values when the oe-core defconfig is run through 'make oldconfig'. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: re-order defconfig to align with busybox 1.23.2Andre McCurdy1
No functional changes, simply re-order lines in defconfig so that the existing options don't move elsewhere in the file when run though busybox 1.23.2 'make oldconfig'. Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01busybox: remove CONFIG_FEATURE_VI_OPTIMIZE_CURSOR from defconfigAndre McCurdy1
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR is obsolete and removed from busybox v1.21.0 onwards: http://git.busybox.net/busybox/commit/?id=04b52892ed5d9d8a4cf5d887c221a8b50c71274e Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-08-01init-install-efi.sh: Check if an installation device is presentLeonardo Sandoval1
In case there is no installation device present, give a better message to the user and abort installation. [YOCTO #7971] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31dbus: upgrade to 1.8.20Chen Qi3
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-31glibc: don't override TUNE_CCARGS for MIPSDmitry Eremin-Solenikov1
Overriding TUNE_CCARGS this way breaks MULTILIB setup for MIPS. This override disables multilib handling of tunes for TUNE_CCARGS, thus enforcing glibc's TUNE_CCARGS to the TUNE_CCARGS of main DEFAULTTUNE. Glibc perfectly build without this override for both simple and multilib cases. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31packagegroups-cross-canadian: don't override TRANSLATED_TARGET_ARCHDmitry Eremin-Solenikov1
There is no point in overriding TRANSLATED_TARGET_ARCH in packagegroups-cross-canadian recipe. The cross-canadian class sets the PACKAGE_ARCH variable, thus allarch class (inherited through packagegroup class) doesn't change variables. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31packagegroup-cross-canadian: Make the code more readableRichard Purdie1
Make the code more readable by using the functions slightly differently. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-31initscripts: urandom: respect ${localstatedir} instead of hardcoding /varAndré Draszik1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-22ncurses-terminfo-base: include screen-256colorRichard Tollerton1
Nominally tmux sets TERM=screen which we are including in ncurses-terminfo-base. However, if tmux detects that it's running in a terminal capable of 256-color output (e.g. xterm-256color), it will instead use TERM=screen-256color. We aren't including that, and we ought to be. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-22volatile-binds: correct path of command umountKai Kang1
It calls /sbin/umount to stop service var-volatile-lib. But umount is installed into directory /bin. Correct it. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-20gamin: removeRoss Burton1
Gamin hasn't been required for many years now, maintenance upstream stopped in 2008 and the addition of inotify to the kernel made it redundant. Remove the recipe from oe-core, and references to it in pacakgegroup-core-lsb (LSB doesn't require gamin) and packagegroup-self-hosted. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16systemd-compat-units: set S correctlyRoss Burton1
This recipe doesn't unpack any source, so set S to ${WORKDIR}. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16systemd: update the status of configurable root patchUmut Tezduyar Lindskog1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16systemd: add PACKAGECONFIG for valgrindChen Qi1
Execute `bitbake valgrind && bitbake systemd -c cleansstate && bitbake systemd -c configure && bitbake valgrind -c cleansstate && bitbake systemd -c compile', and we would get the following error. src/libsystemd/sd-bus/bus-control.c: fatal error: valgrind/memcheck.h: No such file or directory. Add PACKAGECONFIG option to sovle this problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16systemd: recommend the vconsole setup unitsRoss Burton1
systemd's early boot wants to run the vconsole setup units. They were split out so that systems without visible consoles don't need the overhead of packaging kbd etc, but we should pull them in by default. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16glibc: print PN when bbwarnRobert Yang1
The current warning is: WARNING: glibc: unable to generate header for spray.x Which is easier to debug than: WARNING: unable to generate header for spray.x And remove the file before generate it again to fix the warning when recompile: file `bootparam_prot.h' already exists and may be overwritten WARNING: unable to generate header for bootparam_prot.x file `nlm_prot.h' already exists and may be overwritten WARNING: unable to generate header for nlm_prot.x [snip] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16initrdscripts: handle mmc device as installer mediumAwais Belal2
Platforms which have the capability of using the MMC as an installer medium will present the same MMC device as an installation candidate. This happens because the MMC devices appear as mmcblk<X> and the current script strips up the <X> which is needed to identify an MMC device uniqely. This patch now updates the way device identifier stripping is done and handles the exclusion of installer device from installation candidates more generically. Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16gettext-minimal-native: use MKIDR_P in Makefile.in.inWenzong Fan1
The Makefile.in.in provided by gettext-minimal-native will be copied to many packages that need gettext to produce multi-lingual messages. Replace mkdir_p with MKDIR_P to fix below errors from those packages' install logs: /bin/sh: 6: @mkdir_p@: not found /usr/bin/install: cannot create regular file 'xxx' As automake manual: From Automake 1.8 to 1.9.6 AM_PROG_MKDIR_P used to define the output variable mkdir_p to one of mkdir -p, install-sh -d, or mkinstalldirs. Nowadays Autoconf provides a similar functionality with AC_PROG_MKDIR_P, it will set output variable MKDIR_P. Automake manual advises to switch ASAP to the more modern Autoconf-provided interface instead; both the macro and the variable have been removed from Automake 1.12.1 and later releases. Signe-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-16dbus-ptest: set INSANE_SKIP for build-depsRobert Yang1
Skip the warning for dbus-ptest: dbus-1.8.18: dbus-ptest rdepends on dbus-test-ptest, but it isn't a build dependency? [build-deps] We add dbus-test to dbus' DEPENDS to fix the problem usually, but dbus-test DEPENDS on dbus, so we can't do that, use INSANE_SKIP to fix the problem. (From OE-Core rev: 7bf27752cdfcb83a951086d6e5609593c79437c3) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-16glibc: remove invalid ac_cv_path_KSHRobert Yang1
There is no ac_cv_path_KSH in configure, can't find it in config.log after remove, either. (From OE-Core rev: 6b58670d8b8f2d1c1a7d5043652f48a364a0df5d) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12netbase: add rpcbind as an alias to sunrpcLi Wang2
the patch comes from: https://bugs.archlinux.org/task/20273 Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12glibc-initial: remove invalid sed commandRobert Yang1
There is no "{ (exit 1); exit 1; }; }" in configure any more, and also remove chmod since sed command is removed. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-12buildtools-tarball: Add inherit toolchain-scriptsRichard Purdie1
The core class used to have this inherit but its being phased out, add the inherit directly where we need it instead. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-08systemd: add PACKAGECONFIG selinuxKai Kang1
Add PACKAGECONFIG 'selinux' for systemd. debug-shell.service starts different shell according whether selinux is enabled. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-08initscripts: add /sbin/sushell for systemd service debug-shellKai Kang2
Add file /sbin/sushell for systemd service debug-shell which starts with /bin/sushell when SELinux is enabled. Copy and add sushell file from Fedora 22. Add runtime dependency bash as well when systemd is enabled to eliminate QA warning: WARNING: QA Issue: /sbin/sushell_initscripts contained in package initscripts requires /bin/bash, but no providers found in its RDEPENDS [file-rdeps] Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-07-08coreutils: upgrade to 8.24Chen Qi5
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 08:05:08 +0000