| Age | Commit message (Collapse) | Author | Files |
|---|
|
Previous attempts to constrain execution of `resize` to only TTYs did
not properly handle situations when `tty` would return the string "not a
tty". The symptom is "/etc/profile: line 34: test: too many arguments".
Fix this by utilizing the exit code of `tty`. Also use `case` instead of
`cut` to eliminate a subshell.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The init script will return '1' if we try to stop the service and it is
not currently running. The prerm scriptlet must not fail because of this
because it will cause package deinstallation of upgrade fail if opkg
package manager is used.
[YOCTO #10299]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for MIPS Release 6 ISA
The loader is located at a new place for multiarch.
For more details, check https://wiki.debian.org/Multiarch
and https://sourceware.org/glibc/wiki/ABIList#mips
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If no /etc/localtime (or /etc/TZ for uclibc) is found, then the libc
will default to UTC, so setting UTC as a fallback default via the TZ
environment variable is redundant.
Since having the TZ environment variable set causes /etc/localtime
to be ignored, it can cause confusion if /etc/localtime is added
interactively after /etc/profile has been run.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create kbd-ptest sub-package:
* add file run-ptest and runtime dependency make
* modify installed Makefile to disable remake Makefile and the test
cases when run the ptest
* add patch to set proper path for test cases to get resource files
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Expand TOOLCHAIN_CONFIGSITE_NOCACHE value immediately before inheriting
cross-canadian to avoid HOST_ARCH being changed from TARGET_ARCH to SDK_ARCH,
thus ensuring its correct value.
[YOCTO #10255]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code did "mv ${D}${base_libdir}/udev ${D}${nonarch_base_libdir}"
which is not needed any more, eudev can work with ${base_libdir}/udev.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
It provides udev, but doesn't install udev.pc, which causes other
recipes failed to figure out udevdir.
Fixed when systemd in DISTRO_FEATURES:
$ bitbake pcmciautils (or btrfs-tools):
Package udev was not found in the pkg-config search path.
Perhaps you should add the directory containing `udev.pc'
to the PKG_CONFIG_PATH environment variable
No package 'udev' found
Their udev rules file may not be installed according to each pkg's
implementation.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
We still have problems where deploying SDKMACHINE=i686 can cause removal
of SDKMACHINE=x86_64 artefacts.
The reason is that x86_64 is a BUILD_ARCH as well as an SDK_ARCH and
the manifest namespaces overlap. To fix this, set PACKAGE_ARCH and
the stamp-extra-into to include SDK_OS. SDK_OS may not be entirely correct
but it is what sstate.bbclass uses for nativesdk and fixing that is
a separate issue.
This is confirmed to resolve artefact problems on the AB which have been
delaying a new uninative release.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildtools-tarball shouldn't be regenerated when MACHINE changes,
nor should variants for other SDKMACHINE be removed from the deploy
directory when SDKMACHINE changes.
Remove target architecture dependencies so that deploy artefacts
can overlap.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The uninative tarball only contains nativesdk compoents. It should
not get regenerated when MACHINE changes for example. Currently its
sstate arch is also incorrect so changing SDKMACHINE results in other
variants being removed from the deploy directory.
This patch removes the target architecture dependencies so that
deploy artefacts can overlap and it doesn't continually rebuild. This
also fixes various autobuilder/release artefact issues we're having
as a result of these issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise the stamps for x86-64 and i686 uninative tarballs match
and we can't deploy both to the DEPLOYDIR.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Dropbear will use system versions of libtommath and libtomcrypt if
available. To make builds deterministic, add a PACKAGECONFIG option
to choose system libs or force use of the bundled versions.
Note that currently there are no libtommath or libtomcrypt recipes
in oe-core, so default to using the bundled versions.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To prevent build failures when using system libtom libraries and
linking with --as-needed, LIBTOM_LIBS should be in the order
-ltomcrypt -ltommath, not the other way around, ie libs should be
prepended to LIBTOM_LIBS as they are found, not appended.
Note that LIBTOM_LIBS is not used when linking with the bundled
libtom libs.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Due to the recipe now using variable IMGDEPLOYDIR instead of DEPLOY_DIR_IMAGE,
the final Build Appliance image ended up being created in a wrong location.
This patch assures the final ZIP image is created in identical location as before:
tmp/deploy/images/<machine>/Yocto_Build_Apliance.zip
[YOCTO#10274]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable building of mkfs.bfs, which is used to create
BFS file-systems used by SCO UnixWare. This is highly
unlikely to be utilized and there are otherwise no
references to 'bfs' throughout the rest of the tree.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable building of {mkfs,fsck}.minix, which are used
to support minix file-systems. Minix predates Linux and
support for its file-systems is unlikely to be needed.
No recipes otherwise reference minix, except in patches
to autotools configuration scripts, so there should be no
impact to other recipes.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building busybox, an occasional error was observed.
The error is consistently the same:
libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function)
while (i < NUM_APPLETS) {
The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified)
at the time libbb/appletlib.c is compiled.
The attached patchset fixes the problem by assuring libb is compiled as the last directory.
[YOCTO#10116]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building eudev from scratch in an sstate build results in configure errors
since the pkg-config macros can't be found. Add in a missing pkg-config
dependency using the appropriate class to avoid such failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
At this time systemd journald uses the /run tmpfs to store logs
by default systemd uses 15% of available space [1] of the /run
partition, when the space runs out journald starts to vaccum/store
the logs into /var/log [1].
It causes two problems one of them is timeout dev-ttySN.device's
when enable debug and use journal as systemd.log_target [2] the other
is related to don't find syslog entries into the journal log [3].
This problems are now more evident because i recently enabled the
systemd debug option in testimage [4].
One area of improvement will be add support in systemd journald to
read these parameters from the kernel cmdline like systemd.log_target,
if the support exists we could add that parameter at level of testimage.
[1] https://www.freedesktop.org/software/systemd/man/journald.conf.html#SystemMaxUse=
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8142#c19
[3] https://bugzilla.yoctoproject.org/show_bug.cgi?id=10128#c4
[4] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=a86a1b2703372c12e7fca18918695d093ea6ee53
[YOCTO #10128]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The kernel does not automatically mount devtmpfs when using initramfs
based booting (even when using CONFIG_DEVTMPFS_MOUNT). If the rootfs
is built with USE_DEVFS=1 (which is the default), the system ends up
with a completely empty /dev to begin with.
Busybox uses the first entry in inittab slightly different than
other init systems:
<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is.
Since /dev/null is not there yet, Busybox throws errors instead of
executing the commands, and hence never mounts devtmpfs:
init started: BusyBox v1.24.1 (2016-09-04 11:53:14 PDT)
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
Avoid this circular dependency by not specifing <id>. With that
Busybox ends up using the stdio of the init process and executes
the inittab just fine.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The lib/oe/path.py requires xattr, fixed:
Subprocess output:
cp: cannot preserve extended attributes, cp is built without xattr support
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are not available on mipsel yet so disable them
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are not available on mipsel yet, so disable them.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
under sstate control
Firstly, these recipes are not target (MACHINE) specific so they should
by SDK_ARCH based, not PACKAGE_ARCH.
Also fix use of SDK_DEPLOY -> SDKDEPOLYDIR after other recent changes.
Together these fixes avoid various build failures and ensure the tarballs
only get built once rather than multiple times.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed deployment directory from DEPLOY_DIR_IMAGE to
IMGDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Renamed variable deploy_dir to deploy_dir_image in selftest code
to avoid confusion with DEPLOYDIR variable.
Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable
as it's now used as a new deployment destination.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is a busybox upstream known bug. When the busybox sed sub-command 'n'
hit the files EOF, it print an extra character that have been printed, but
the GNU sed would not print it.
In busybox source code ../editors/sed.c
------------------------------------------------------------------------
case 'n':
if (!G.be_quiet)
sed_puts(pattern_space, last_gets_char);
if (next_line) {
free(pattern_space);
pattern_space = next_line;
last_gets_char = next_gets_char;
next_line = get_next_line(&next_gets_char, &last_puts_char, last_gets_char);
substituted = 0;
linenum++;
break;
}
/* fall through */
/* Quit. End of script, end of input. */
case 'q':
/* Exit the outer while loop */
free(next_line);
next_line = NULL;
goto discard_commands;
------------------------------------------------------------------------
when read at the end of the file, the 'next_line' is null, it would go
"case 'q'" and goto discard_commands, the discard_commands would print
the old pattern space which have been printed.
So in order to comply with GNU sed, in case 'n', when the next_line is null
I add "else" at the end of the second "if": "goto again;" and send it to
the busybox upstream, the busybox maintainer adopt it and make a little
changes to the patch, we can see it at:
His reply:
http://lists.busybox.net/pipermail/busybox/2016-September/084613.html
The new patch on busybox master branch:
https://git.busybox.net/busybox/commit/?id=76d72376e0244a5cafd4880cdc623e37d86a75e4
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For example bootlogd needs devpts to be running, but bootlogd starts
at 07. Starting bootlogd early makes perfect sense, so the best option
here is to move devpts up to 06 to prevent this error message at boot:
cannot allocate pseudo tty: No such file or directory
Systems that have CONFIG_LEGACY_PTYS in the kernel will not see this
message. Since it is called "LEGACY" for a reason, fixing this in
userspace appears to be the better option here.
The devpts script does not need anything except a mounted "/dev" which
has been arranged in "S02sysfs.sh" already.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tty can return "not a tt" which results in warnings when /etc/profile
is executed.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe is to generate an environment script in
do_populate_ide_support for using an IDE and it
doesn't generate packages at all, so inherit nopackages
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It solves below error observed on qemux86 target:
root@qemux86:~# sotruss ./hello
ERROR: ld.so: object '/usr/$LIB/audit/sotruss-lib.so' cannot be loaded as audit
interface: cannot open shared object file; ignored.
Hello World
root@qemux86:~#
With this change, we get:
root@qemux86:~# sotruss ./hello
hello -> libc.so.6 :*__libc_start_main(0x8048300, 0x1,
0xbfc86274)
hello -> libc.so.6 :*puts(0x804851c, 0xb74af000, 0x0)
Hello World
root@qemux86:~#
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
devices
The init-install.sh and init-install-efi.sh scripts perform a check
to see which devices are available on a booted system for installation.
Recently, the way we check for these devices changed on 993bfb,
greping for devices found on /sys/block/, this change caused the installer
to fail (at least) when not finding any mmcblk devices, due to the fact
that we call sh -e to execute this script, so any command (grep)
or pipeline exiting with a non-zero status causes the whole script to exit
This patch throws in a harmless true exit status at the end of the pipeline(s)
of the grep commands to avoid the installer script from exiting, fixing the issue.
[YOCTO #10189]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Split container/vm related units into a new package, systemd-container.
The split mainly references Fedora 24, with a few differences.
Apart from the bash and zsh completion files, the differences include
adding systemd-spawn@.service into the systemd-container package.
[YOCTO #9835]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Even though we are just a script, we do depend on
systemd being on the target and need an RDEPENDS
which means we cannot also be allarch.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
