summaryrefslogtreecommitdiff
path: root/meta/recipes-core/systemd
AgeCommit message (Collapse)AuthorFiles
2015-03-16systemd: Fix journal "Failed to set file attributes:" warningRandy Witt2
This is a backport of an upstream patch that fixes the "Failed to set file attributes: Inappropriate ioctl for device" message when the device exists on ext4 filesystems. No functionality is changed, the patch just removes a potentially misleading warning. Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: Fix the problem of an empty journal on bootRandy Witt2
systemd by default tries to write the journal to /var/log/journal. But base-files has a symlink /var/log -> /var/volatile/log. And /var/volatile is a tmpfs mount in /etc/fstab. If the journal service started before /var/volatile was mounted (which was the typical scenario) then the journal would appear empty since the old location was mounted over. This change fixes the problem by ensuring that the journal doesn't start until after the mount happens. [Yocto #7388] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: Fix runtime failures in systemd-tmpfiles-setup.service.Randy Witt2
There were failures at boot from systemd-tmpfiles-setup.service due to tmpfiles.d not honoring the ordering of entries in the files. The patch here fixes the ordering issue which subsequently fixes the failures on boot. [Yocto #7393] Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: correct permission mode of /var/volatile/tmpKai Kang1
Permission mode of directory /var/volatile/tmp should be 1777, correct it. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: Create packageconfig for ldconfig supportKhem Raj1
Useful when we disable ldconfig in glibc, we need to be able to turn it off in systemd too, otherwise systemd tries to launch the service and it fails Change-Id: I170307f809a13def0cafc282e88d4eafa0313c31 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: fix systemd-tmpfiles ACL issuesDan McGregor3
On systems where /var/log is not a volatile systemd-tmpfiles creates duplicate ACL entries. This causes systemd-tmpfiles service to fail. Also quietly ignore ACL settings on filesystems that don't support ACLs. Backport the fixes from systemd master to fix these issues. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-09systemd: avoid parsing error when 'networkd' is enabled in PACKAGECONFIGChen Qi1
If 'networkd' is enabled in PACKAGECONFIG, the do_install variable cannot be correctly expanded. Error message is like below. Failure expanding variable do_install: ShellSyntaxError: LexToken(Fi,'fi',0,0) followed by: LexToken(NEWLINE,'\n',0,0) This patch fixes the above problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-03-03systemd: fix tmpfiles error on images without PAMRoss Burton2
If PAM isn't enabled then systemd-tmpfiles on boot will fail to start with the following error message: Failed to copy files to /etc/pam.d: No such file or directory This is because systemd-tmpfiles is attempting to build a usable /etc from the skeleton in /usr/share/factory but pam.d isn't present because PAM is disabled. Fix this by not attempting to copy pam.d in non-PAM configurations. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: add PACKAGECONFIG for xkbcommon and iptablesRoss Burton1
systemd has optional support for xkbcommon (verify keymaps when locale changes) and iptables (configure NAT rules). Add PACKAGECONFIG options for these, disabling iptables by default and respecting the X11 DISTRO_FEATURE for libxkbcommon (as the code involves X11 keymaps). Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: use PACKAGECONFIG for PAM enable/disableRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: add missing util-linux build-dependencyRoss Burton1
This dependency accidently disappeared in the 219 upgrade, so add it back. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-27systemd: Upgrade 218 -> 219Khem Raj16
219 has been in the docks for sometime, the older patch got merged this patch is now upgrading 218 to 219 Make all patches using git Change-Id: Ib0350144592aba26cad56c13c9a5522515915c58 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-24systemd: Upgrade 216 -> 218Khem Raj10
Remove upstreamed patches as well as patches which arent needed anymore since features are dropped from systemd e.g. userspace firmware download Tested on qemux86 Change-Id: Ic53aaad198998de146c3a7702ef17de871de9de6 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-02-03systemd: Backports fixes to 216Khem Raj5
Fix systemd-timesyncd assertion when networkd is disabled then we now do not create /run/systemd/netif/links but timesyncd needs it. So lets manually create this file when networkd is disabled so timesyncd can still function When enabling systemd-timesyncd we need systemd-timesync user Backport patches to enable timesyncd when resolved and networkd are disabled replace the resolv.conf symlinink patch with a proper backport Change-Id: I53f1a53eec4e4a4dbdfb7e8cd155d544ee5d81ec Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-29systemd: remove util-linux from DEPENDSChen Qi1
Remove 'util-linux' from DEPENDS so that we don't have the following circular dependency issue. systemd <--> util-linux This dependency was first introduced into the recipe without saying any reason about it. After checking the source files in systemd, I can guess that the reason might be udev making use of libblkid. However, we actually have ./src/udev/udev-builtin-blkid.c. So this dependency is not necessary and could be safely removed. Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
2015-01-23meta: set proper S valuePetter Mabäcker1
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-16systemd: add missing RDEPENDSRoss Burton1
systemd-ptest also needs a Python interpretter. Also remove the redundant comment. systemd-kernel-install is a bash script that can't be trivially ported to POSIX sh. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19systemd-systemctl: add handling of template unit filesTomas Novotny1
Template unit files (those with '@' in their names) are not handled with native version of systemctl. This is usually not a problem, as the native systemctl fails and systemctl command is executed during first boot. But some early boot template units may fail during first boot because opkg configure for first boot is pulled too late for them (although I encouter it only with some of my services, not with oe-core ones). Handling of template unit files is same as in original systemctl. Also DefaultInstance directive in template is respected. As with original systemctl, enabling of template without instance and DefaultInstance does nothing. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19systemd: backport patch to fix reading journal backwardsJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-05systemd: add PACKAGECONFIG for 'manpages'Chen Qi1
Instead of always disabling manpages for systemd, we use PACKAGECONFIG for 'manpages' so that the manpages for systemd could be built out correctly. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-20systemd-serialgetty: Disable the carrier detect requirement for serial consolesOtavio Salvador1
This aligns the params of getty with the ones used in Debian. From the getty(8) manpage: ,----[ getty(8) manpage ] | -L, --local-line | | Force the line to be a local line with no need for carrier | detect. This can be useful when you have a locally attached | terminal where the serial line does not set the carrier detect | signal. `---- Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-12systemd: add PACKAGECONFIG for 'audit'Chen Qi1
Add PACKAGECONFIG for 'audit', otherwise there would be warnings like below which would possibly lead to do_rootfs failure. WARNING: QA Issue: systemd-analyze rdepends on audit, but it isn't a build dependency? [build-deps] WARNING: QA Issue: systemd rdepends on audit, but it isn't a build dependency? [build-deps] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-12systemd: avoid using system-authChen Qi2
Patch systemd-user pam configuartion file to avoid using system-auth file. Instead, we use common-* files. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-04systemd: don't move libgudev around, it breaks libgudev-1.0.laMartin Jansa1
* libgudev-1.0.la still references /usr/lib and this change was breaking gypsy (detected in navit) and network-manager-applet Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-24systemd: fix libidn floating dependencyChen Qi1
WARNING: QA Issue: systemd rdepends on libidn, but it isn't a build dependency? [build-deps] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-24systemd: Use ${ROOT_HOME} instead of /rootDan McGregor2
systemd avoids using nss lookups for the root user, so naturally it assumes that root's home directory is /root. In OE that's not the case, and it can lead to long delays when shutting down due to user shutdown unit failures. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-29systemd: disable resolv.conf symlink unless resolved is enabledPeter A. Bigot2
The tmpfiles configuration in systemd unconditionally creates a symlink from /etc/resolv.conf to the location where systemd's resolved service will place the real file. This link is only appropriate when resolved is enabled and running: its presence prevents connman or other systems from providing a working resolv.conf when systemd is not assigned that responsibility. OE has not yet enabled systemd's networkd or resolved by default. There is a TODO in the systemd source to fix this, but it has not been addressed upstream. This patch comments out the corresponding line when resolved is not enabled in the package configuration. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-16systemd: fix to use ${libdir} for librariesChen Qi1
We need to use ${libdir} instead of ${exec_prefix}/lib for libraries. Otherwise, we would meet do_install errors if multilib is enabled. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-09-10systemd: disable resolved and networkdRoss Burton1
These two services are fairly immature and need careful integration into the rest of the system, so disable them for now. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-10systemd: Adding RRECOMMENDS for os-releaseSujith H1
Systemd depends on the os-release hence adding RRECOMMENDS for the systemd package. [ RB - updated for 216 ] Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: enable forwarding messages to syslog daemonChen Qi1
In systemd_216, journald by default doesn't forward messages to syslog daemon. This breaks the oeqa testing cases. So we enable forwarding the messages for now. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: add support for executing scripts under /etc/rcS.dChen Qi2
This patch adds support for systemd to execute scripts under /etc/rcS.d. To be compitable, all services translated from /etc/rcS.d/ scripts would run before services translated from /etc/rcN.d scripts. [YOCTO #5159] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: add kbd-keymaps to RRECOMMENDS of systemd-vconsole-setupChen Qi1
systemd-vconsole-setup.service not only configures font but also keymaps. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: make runlevel work in non-runlevel targetsChen Qi1
Previously, after booting into the targets like multi-user.target or graphical.target, the output of `runlevel' command is 'unknown'. This is confusing for users. Normally, we would expect mutli-user.target would have a `runlevel' output of 'N 3'. This is the behaviour of Fedora20. This patch installs symlinks for systemd-update-utmp-runlevel.service in do_install task to fix the above problem. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: add PACKAGECONFIG for 'journal-upload'Chen Qi1
Add PACKAGECONFIG for 'journal-upload' and disable it by default. Once enabled, it will add 'curl' to its dependency. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-03systemd: upgrade to 216Chen Qi5
Upgrade systemd from 213 to 216. systemd-older-kernel.patch is removed as it's fixed in 216. 0001-uClibc-doesn-t-implement-pwritev-preadv.patch is removed because the file it patches has been removed from the project. 0001-util-Including-missing.h-to-get-MAX_HANDLE_SZ.patch is removed because it has been merged. 0001-missing.h-add-fake-__NR_memfd_create-for-MIPS.patch is backported to fix compilation error for mips. Below are the required kernel versions for systemd 216. Linux kernel >= 3.0 Linux kernel >= 3.3 for loop device partition support features with nspawn Linux kernel >= 3.8 for Smack support Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-31systemd: add PACKAGECONFIG for 'elfutils'Chen Qi1
Add PACKAGECONFIG for 'elfutils'. This also fixes a build-deps QA warning about libdw. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-28valgrind/oprofile/systemd: no bashism in run-ptestRobert Yang1
There is no bashism in the scripts, so use /bin/sh, and add /bin/sh interpreter for systemd's run-ptest. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27systemd: Support building on uclibcKhem Raj2
include missing.h to get MAX_HANDLE_SZ which is not defined in uclibc. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-15systemd: Inherit gettextPeter Kjellerstedt1
Build fails otherwise if USE_NLS is set to "no". Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-02systemd: add volatile-binds to RDEPENDSChen Qi1
This services generated from volatile-binds.bb recipe file only have effect in a read-only filesystem. So if the rootfs is read-write, the related service are not started. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-23systemd: change dependency relationshipsChen Qi1
When building out a systemd based image, the udev-hwdb postinstall script always fails at rootfs time. This is because that the 'udevadm' command used in udev-hwdb postinstall script is now in the udev package and udev recommends udev-hwdb. Instead of letting udev recommends udev-hwdb, we let systemd do it and make udev-hwdb rdepend on udev. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-25systemd: remove udev-utils, move 'udevadm' to udev packageChen Qi1
The udev package RDEPENDS on the udev-utils package, and the actually udev-utils package relies on the udev package because if there's no udev daemon, 'udevadm' command doesn't make much sense. Now that we have removed udev-utils package and moved 'udevadm' to the udev package in the older udev recipe, we should do the same for systemd. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-17systemd: check IFLA_VLAN_PROTOCOLRobert Yang2
The older kernel's linux/if_link.h doesn't have IFLA_VLAN_PROTOCOL, we need check whether it has been defined or not. The maintainer said that he would fix it: http://thread.gmane.org/gmane.comp.sysutils.systemd.devel/18200 Also we need redefine IFLA_MAX from 34 to 35 when define IFLA_CARRIER, otherwise there would be error: | src/libsystemd/sd-rtnl/rtnl-types.c:233:9: error: array index in initializer exceeds array bounds | [IFLA_CARRIER] = { .type = NLA_U8 }, [YOCTO #6380] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-06systemd: update a uclibc specific patch to avoid segment fault errorChen Qi1
The alloca() function allocates space in the stack frame of the caller, so using alloca(new_size - old_size) would possibly crash the stack, causing a segment fault error. This patch fixes the above problem by avoiding using this function in journal-file.c. [YOCTO #6201] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-01systemd: Upgrade 212 -> 213Khem Raj1
boots on all qemu machines Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-13systemd: remove tcp-wrappers optionRoss Burton1
systemd version 212 removed the TCP wrappers support, so remove the PACKAGECONFIG stanza for it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-11systemd: Upgrade past 212 releaseKhem Raj3
Remove unconditional enable-xz, its specified by PACKAGECONFIG anyway Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-06serial-getty service: Add xterm as default TERMJoel Fernandes1
In poky with systemd enabled, vt102 is selected for getty causing user to experience a very crappy terminal. Default TERM to xterm. Reviewed-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-05systemd: Fix build with gcc 4.9Khem Raj1
We need to use gcc-nm and gcc-ar to deal with slim objects which are generated when using -flto (From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-24 08:01:37 +0000