| Age | Commit message (Collapse) | Author | Files |
|---|
|
Newer host distributions are moving to ncurses6, therefore add entries so the
host's ncurses{w}6-config scripts aren't picked up.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having ncurses-terminfo-base before ncurses-terminfo is currently irrelevant
because the current file lists are completely disjunct. However, when building
"stateless" via a .bbappend, the content of curses-terminfo-base also needs
to live under /usr/share and then it becomes important that files
belonging to ncurses-terminfo-base are checked first.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As "install.libs" also installs header files, it is
redundant to also call "install.includes".
In fact, doing so can lead to a race, as both targets could
try to install the header files at the same time if running
parallel make. Obviously, with only calling "install.libs",
there is no race with "install.includes".
If there is no race, then the patch fix-include-files-race.patch
is no longer needed.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Both targets install.libs and install.includes install the same
files, resulting in a race condition when running parallel make.
This race is addressed in a patch file, making sure only one
of the targets (install.includes) installes the include files.
This will work properly (i.e.ncurses will install as intended
by the recipe) as long as we always install both targets.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also, put the revision into PV, so that a meaningful upstream version
check can be performed.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch removes a workaround (needed for bitbake python parser) where
closing curly brackets were replaced by ascii code '\x7d'.
This commit requires a bitbake version with the
"data_smart: simple bracket matching inside python expressions" patch
applied.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To be compatible with ncurses 5, add option '--with-abi-version=5' to EXTRA_OECONF
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Removes ncurses-config from BINCONFIG, that file does not exist at all.
* Adds in ncurses5-config and ncursesw5-config to BINCONFIG.
This fixed following warnings during SDK install:
warning: Removing ncurses-dev-5.9-r15.1@lib32_x86 due to file /usr/bin/ncurses5-config conflicting with ncurses-dev-5.9-r15.1@core2_64
warning: Removing ncurses-dev-5.9-r15.1@lib32_x86 due to file /usr/bin/ncursesw5-config conflicting with ncurses-dev-5.9-r15.1@core2_64
[YOCTO #8801]
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ncurses source tarball from "current" directory in
ftp://invisible-island.net gets updated/deleted during the release cycle.
We can't depend on that FTP server to fetch source as the maintainer
doesn't guarantee the presence of all patched versions in the server.
ftp://invisible-island.net/ncurses/5.9/README
Fetch sources from debian git server as it is comparatively reliable.
[YOCTO #8713]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Nominally tmux sets TERM=screen which we are including in
ncurses-terminfo-base. However, if tmux detects that it's running in a
terminal capable of 256-color output (e.g. xterm-256color), it will
instead use TERM=screen-256color. We aren't including that, and we ought
to be.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without pkgconfig being present at build time it's possible for the .pc files to
not be installed correctly.
Signed-off-by: Christophe Guillon <christophe.guillon@st.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gcc5 barfs on older release
Change-Id: Ib1ad9b1cf7f16eb454da21fd61dc56fe1d9f6783
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed ncurses.do_configure:
configure: WARNING: did not find library /path/to/tmp/sysroots/qemuarm/usr/lib/pkgconfig
And then anyone requires ncurses.pc will fail.
The configure.in checks:
[snip]
if test -n "$PKG_CONFIG_LIBDIR" && test -d "$PKG_CONFIG_LIBDIR" ; then
[snip]
Create PKG_CONFIG_LIBDIR in do_configure will fix the problem.
We can reproduce the problem by:
Set SSTATE_DIR=/path/to/sstate-cache
1) In build1, make sure everything is ready in SSTATE_DIR
$ bitbake ncurses
2) In build2, rebuild ncurses only:
$ bitbake ncurses -ccleansstate && bitbake ncurses
Then we will see the warning in log.do_configure.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds a binconfig-disabled class which can be used by recipes where
a -config file is installed but we wish to disable it and just rely on
the .pc files instead.
Rather than simply deleting it, we make the script "exit 1" so that it
can be found in PATH and raise a build error rather than something
silently falling back to the build system for example.
Rather than randomly finding -config files, this adds in the
specification of a list of binconfig scripts which is more deterministic
and maintainable moving forward.
This patch converts various users in OE-Core to use this, a world build
of OE-Core tests out ok with this change. There will likely be issues in
other layers however, hence this being a RFT.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop the use of custom Python code and instead use the new lnr script to
generate relative symlinks.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
ln -r isn't available in older versions of coreutils such as those
present in Ubuntu 12.04. We'll find an alternative solution.
This reverts commit 65c2439ab6dcbd4c52439cdc96acb8ba222c196b.
|
|
Instead of using a Python do_install() and calling
oe.path.make_relative_symlink, just pass -r to ln to generate a relative symlink
directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The virtclass overrides will go away at some point (apart from the multilib one).
Change them all to class-xxx instead since people enjoy copy and pasting them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The vtX terminfo files aren't being copied on systems where bash isn't
the default shell (debian, etc.). I removed the bash specific syntax
so the files are properly copied on these systems.
Signed-off-by: Seth Bollinger <seth.boll@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is to address the buildtools-tarball still having problems with certain
xterms
[YOCTO #4835]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The ncurses package was generating the following error as a result
of not specifing the PACKAGES_DYNAMIC correctly. This error only
appear when using the IMAGE_INSTALL list that has been expanded by
the hob or from the pkgdata.
ERROR: Nothing RPROVIDES 'ncurses-libtinfo'
The dynamic packages are named using "${PN}-lib%s". So we check for
${PN}-lib*
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change allows ${B} != ${S} builds to work as otherwise
gnu-configize is executed in the incorrect directory.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[ CQID: WIND00405305 ]
When using ncurses from sstate cache it is not able to find terminfo
for screen on RHEL 6. While RHEL 6 has /lib/terminfo, it is not
complete, the complete terminfo database is in /usr/share/terminfo. This
results failure of programs linked to ncurses, such as menuconfig.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
CQID: WIND00402979
Display corruption was occurring on 64 bit hosts using menuconfig for
the kernel and busybox with the ncurses-native or ncurses-nativesdk
because the configure arguments were not sufficient vs the expected
use from the upstream source.
Also changed in this commit is to provide a fallback to the hard
compiled paths for the terminfo and termcap. Eventually this needs to
be fixed another way if we want a truly portable SDK because any SDK
that is relocated or native binaries pulled out of the sstate can end
up referencing terminfo files that no longer are in the same location.
Because the host system has terminfo files that ncurses will happily
use we might as well have a fall back to buy some time for a better
fix, vs having thing just not work occasionally when using sstate.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
There is an warning:
$ bitbake nativesdk-ncurses
WARNING: QA Issue: nativesdk-ncurses: Files/directories were installed
but not shipped
/opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/clear.ncurses
/opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/reset.ncurses
NOTE: Tasks Summary: Attempted 533 tasks of which 521 didn't need to be
rerun and all succeeded.
And there is no clear or reset tool in the SDK.
This is caused by:
ALTERNATIVE_ncurses-tools = "clear reset"
It creates clear.ncurses and reset.ncurses which are used for avoiding
the conflicts with the target busybox, but SDK doesn't need them since
there is no nativesdk-busybox (then no conflicts), so:
ALTERNATIVE_ncurses-tools_class-target = "clear reset"
will fix the problem.
[YOCTO #3325]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ERROR: QA Issue: lib32-ncurses: Files/directories were installed but not shipped
/usr/bin/clear.ncurses
/usr/bin/reset.ncurses
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
|
|
Fixed not shipped packaging warnings.
WARNING: For recipe ncurses-nativesdk, the following files/directories
were installed but not shipped in any package:
WARNING:
/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/bin/reset
WARNING:
/opt/poky/1.1+snapshot/sysroots/x86_64-pokysdk-linux/usr/bin/clear
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix this issue:
| rm: cannot remove `/srv/home/nitin/builds/build-multilib/tmp/work/x86_64-poky-linux/ncurses-5.9-r6.1/image/usr/lib64/terminfo': No such file or directory
NOTE: package ncurses-5.9-r6.1: task do_install: Failed
PR not bumped as there is no change in the packages output.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This ensures packaging of the ncurses libraries moved to
base_libdir is done correctly.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If wide character support is disabled (as it is with poky-tiny, for
example) then we won't have libncursesw.so.*, so skip moving these files
in that case. (Fixes a regression introduced in OE-Core revision
ccd370ab147b78de7a5bd74818f755f4d3ca6d81).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The previous approach to moving the ncurses libraries to
base_libdir was too aggressive, and it broke curses support
in python.
Instead, move only libncurses, libncursesw, and libtinfo to
base_libdir and leave the remaining libraries in libdir.
Also delete ${libdir}/terminfo as it never gets packaged to
avoid a QA warning.
This fixes [YOCTO #2070] and is a partial fix for [YOCTO #1937].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
sed \
-e 's:bb.data.\(expand([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data.expand *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For target, both base_libdir and libdir in sysroot can be used, as we pass
--sysroot to the toolchain. For native, we don't do this, and we also only add
-L<sysroot>/${libdir}, not -L<sysroot>/${base_libdir}, resulting in other
native recipes (like readline-native) failing to find the ncurses libraries.
readline-native only built successfully on hosts where it could fall back to
their ncurses/termcap rather than the one in the sysroot.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
Various utilities (including bash and the util-linux programs) located
in base_bindir (/bin) or base_sbindir (/sbin) dynamically link against
many of the ncurses libraries. So move these libraries from libdir
(/usr/lib) to base_libdir (/lib).
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set ENABLE_WIDEC with ?= instead of = to allow for the external override
by distro definitions.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current libcurses (backward compat) links to libncurses.so.5.9,
this causes a problem since this library also needs libtinfo, the
libncurses.so, uses a "ld script" to include both, libcurses.so
should point to libncurses.so (the script) not the library.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The ENABLE_WIDEC variable can be used to disable ncurses wide character support
when your C library doesn't support it. Currently, the do_configure step
configures for both narrow and wide characters regardless and only checks
ENABLE_WIDEC during compilation. This leads to QA failures with host
contamination during configure if the C library doesn't support wide characters.
Refactor do_configure with a new ncurses_configure helper function and only
configure for wide character support if ENABLE_WIDEC is true.
Ensure that configure errors are propogated back through to do_configure.
Tested with ENABLE_WIDEC as true and false via an ncurses bbappend on i586,
including basic error injection.
V2: INC_PR bump
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
By default man pages are compressed, the way ncurses compresses
them causes differences (timestamp and name) to be embedded into
the gziped file. So each build will end up with a slightly
different file. Avoid this, by not compressing the man pages.
Avoid header conflict with curses.h using the multilib header
helper.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
The site_config directory should have been attached to ncurses.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch includes the update of patch upstream status of the following
recipes (50 in all):
grub pciutils setserial dhcp iproute2 libnss-mdns nfs-utils openssl portmap
busybox coreutils dbus dropbear ncurses readline sysfsutils sysvinit tinylogin
udev update-rc.d util-linux elfutils file pkgconfig syslinux ubootchart
yaffs2 findutils gamin hdparm libaio libzypp parted procps sat-solver
screen sed sysklogd tcp-wrapper time zypper attr boost createrepo gnutls
hal js libgcrypt libnl libusb-compat
Signed-off-by: Qing He <qing.he@intel.com>
|
