summaryrefslogtreecommitdiff
path: root/meta/recipes-connectivity
AgeCommit message (Collapse)AuthorFiles
2015-01-28bind: fix typo chown->chmodTing Liu2
Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-23dhcp: not override site.hHongxu Jia3
Previously, site.h was overridden for setting _PATH_DHCPD_CONF and _PATH_DHCLIENT_CONF, it caused other MACROs were missing, so we use a patch to instead. The macros NSUPDATE and COMPACT_LEASES existed in site.h Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23dhcp: upgrade to 4.3.1Hongxu Jia2
Rebase fixsepbuild.patch to 4.3.1 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
2015-01-23neard: fix B != SRobert Yang2
And bump PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23neard: fix parallel issueRobert Yang2
There might be no src dir if the src/builtin.h runs earlier, create it to fix the race issue: src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h /bin/sh: src/builtin.h: No such file or directory Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-23meta: set proper S valuePetter Mabäcker2
After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] Signed-off-by: Petter Mabäcker <petter@technux.se>
2015-01-16connman: fix B != SRobert Yang2
And bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16portmap: remove obsolete linesRobert Yang4
* The SRC_URI and S in portmap.inc was for portmap 5, but we don't have it any more. * Remove DEPENDS = "virtual/fakeroot-native" and fakeroot before do_install. * Remove sbindir = "/sbin" and use "${base_sbindir}" in FILES. * Move patches from dir portmap-6.0 to portmap. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-01-16bluez5: upgrade to 5.27Peter A. Bigot1
- Bug fixes in A2DP, OBEX, GATT, and mgmt - Low Energy Secure Connections with 3.19+ kernels See: http://www.bluez.org/release-of-bluez-5-27/ See: http://www.bluez.org/release-of-bluez-5-26/ Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16socat: forcibly disable use of libbsdRoss Burton1
Socat will look for openpty() in BSD headers before Linux headers, so if libbsd is present at configure time then that will be used. We don't need to depend on libbsd though, and leaving it floating can cause build errors, so tell configure that the libbsd header isn't present. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-01-16openssh: deliver ssh-copy-idKai Kang1
Deliver script ssh-copy-id from openssh which is useful to add an authorized ssh key. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-08bind: Update libxml2 check to make it deterministic.Noor2
* Firstly configure scritp was testing files from bin folder. In our case we don't copy bin folder to sysroot for target recipes. So added extra check to validate .pc file from lib folder via a patch to configure.in file. * Secondly linxml2 dependency was missing. So added PACKAGECONFIG for libxml2. Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-07openssl: fix hard paths in native opensslAndré Draszik1
This causes the package to not be relocateable from sstate The OpenSSL binaries respect a few environment variables for determining locations of files, so we now use these to point the binaries to the relocated locations. [YOCTO #6827] Signed-off-by: André Draszik <adraszik@digisoft.tv> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2015-01-07openssh: upgrade to 6.7p1Paul Eggleton4
* Drop two CVE patches already handled upstream. * Drop nostrip.patch which no longer applies and use the existing --disable-strip configure option instead. * OpenSSH 6.7+ no longer supports tcp wrappers. We could apply the Debian patch to add support back in, but it seems best to follow upstream here unless we have a good reason to do otherwise. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-12-31telepathy: remove (moved to meta-oe)Ross Burton12
Nothing in oe-core uses Telepathy, so move these recipes to meta-oe. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-30bind: fix for CVE-2014-8500Sona Sarmadi2
[From upstream commit: 603a0e2637b35a2da820bc807f69bcf09c682dce] [YOCTO #7098] External References: =================== https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-8500 Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-30wpa-supplicant: avoid host contamination of drivers by libnl3Justin Capella1
(See patch refrenced from OE-core rev: 1c3beda0015da9a0fec2581af7645c9ea122c7e3) Modifies do_configure to inject DRV_CFLAGS variable into wpa_supplicant/.config which is then included during make of drivers. Signed-off-by: Justin Capella <justincapella@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-24bind: fix conf.patch to add db.255 configuration fileChen Qi1
Add in conf.patch /etc/bind/db.255 file so that we don't get the following error. zone 255.in-addr.arpa/IN: loading from master file /etc/bind/db.255 failed: file not found Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-24ppp: upgrade 2.4.7Hongxu Jia1
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-20socat: fix compile erorr against 3.17+ kernel headersBruce Ashfield2
With the linux 3.17 kernel socat's configure detects the wrong include for errqueue.h which results in a compilation error. By backporting the gentoo patch from: http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/socat/files/socat-1.7.2.4-linux-3.17.patch Fixes the build issue Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-19openssh: move setting LD to allow for correct overrideSaul Wold1
Using the export LD in the recipe does not allow for secodnary toolchain overriding LD later, by setting it in the do_configure_append the export is used by autotools setting LD based on the env, but would allow for override later. [YOCTO #6997] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19connman: use PACKAGECONFIG to control systemd optionRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-19ofono: use PACKAGECONFIG for systemd and bluetoothRoss Burton1
For clarity use PACKAGECONFIG for the systemd and bluetooth optional features. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-11bluez5: support experimental through PACKAGECONFIGPeter A. Bigot1
Make it simple to enable the experimental plugins and tools. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-11bluez5: add a package for tools left in the build areaPeter A. Bigot2
In bluez4 gatttool was provided as a command-line interface to the Generic Attribute Profile. In bluez5 this tool is still built but is no longer installed. It is still necessary for those wishing to use GATT since the programmatic API is not yet mature. A variety of other useful tools are treated similarly by bluez5. Make these tools available in the bluez5-noinst-tools package, in a way that allows control over which tools are packaged, with the default being all that are provided in a particular release of bluez. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-11bluez-hcidump: select provider as bluez4 or bluez5Peter A. Bigot2
bluez-hcidump was a separate package in bluez4, but was integrated into bluez5. Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2014-12-05openssh: fix using the original config files in srcdirZheng Junling1
Currently, we install our own ssh_config and sshd_config into ${S} in do_compile_append() task. So when finishing compiling, their .out files are generated by the original files, rather than by our own files. In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out files again, and then installing "install-sysconf", which will install these two files into $(DESTDIR), thus we get what we expect. However, when parallel installing, "install-sysconf" may be installed before "$(CONFIGFILES)" sometimes. In this rare case, the .out files generated in the first time rather than those in the second time will be installed into $(DESTDIR), and thus we get an unexpect result. This patch fixes this bug through transfering the installing of our own files from do_compile_append() into do_configure_prepend(). Signed-off-by: Zheng Junling <zhengjunling@huawei.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-03resolvconf: add fixes for busybox and make it workSaul Wold3
resolvconf was missing a script and needed readlink which was in /usr/bin. Also the /etc/resolv.conf was not being correctly linked to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties change which is now a file as opposed to created in do_install. Ensure that the correct scripts for ifup/ifdown get installed and that resolvconf is correctly enabled at startup [YOCTO #5361] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-12-03connman-gnome: fix dbus interface nameChong Lu2
This patch resolves following error: "connman-dbus.xml": "connman" is not a valid D-Bus interface name Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
2014-11-25bind: clean host path in isc-config.shShiqun Lin1
* /usr/bin/isc-config.sh * /usr/bin/bind9-config - hardlink to isc-config.sh Signed-off-by: Shiqun Lin <Shiqun.Lin@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
2014-11-25nfs-utils: Upgrade to 1.3.1Alejandro Hernandez5
Removed: fix-a-Gcc-undefined-behavior.patch - Upstream Removed: 0001-statd-fixed-the-with-statdpath-flag.patch - Upstream Removed: fix-the-start-statd.patch - Different solution on upstream Removed: nfs-utils-1.0.6-uclibc.patch - Different solution on upstream Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
2014-11-25iproute2: upgrade to 3.17.0Cristian Iorga2
0001-ip-link-Remove-unnecessary-device-checking.patch removed, included upstream. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
2014-11-25libpcap: upgrade to 1.6.2Cristian Iorga1
- Bug fixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
2014-11-20openssh: drop already applied patchPaul Eggleton2
This patch was part of the 6.6p1 release. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-20bind: use PACKAGE_BEFORE_PN instead of PACKAGES_prependRoss Burton1
Appending or prepending to PACKAGES breaks when the package is built natively, so use PACKAGE_BEFORE_PN instead. Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-12bluez5: fix QA error from configure optionPeter A. Bigot1
The systemdunitdir option was split into systemdsystemunitdir and systemduserunitdir before bluez5 was ever released, so this produced a QA error and was ignored. There appears to be no reason to override the inferred default, so replace it with an explicit --enable-systemd. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-12bluez5: upgrade to 5.25Cristian Iorga2
- Cleanups and minor fixes; - Phonebook Access Profile 1.2 and Message Access Profile 1.2 features and improvements; - Various GATT related fixes; - Fix for a race condition which could occasionally cause LE connection/pairing failures. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-12wpa-supplicant: upgrade to 2.3Cristian Iorga3
- P2P WiFi improvements; - Bug fixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-09nfs-utils: change owner/group of directories in do_installChen Qi2
Previously, the owners/groups of directories like /var/lib/nfs/statd are changed in the init script, /etc/init.d/nfscommon. This is actually a workaround. We need to change them at do_install time. This patch fixes the above problem by changing owners/groups at do_install time. Besides, configuration option '--with-staduser=nobody' is changed to be '--with-statduser=rpcuser'. And /var/lib/nfs/statd/state is modified to have permission 0644, just like other distros (ubuntu, fedora, etc.) do. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-09resolvconf: Upgrade to 1.76Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-06gst-plugin-bluetooth: remove systemd service fileChong Lu1
The service file should be included in bluez4 package, not in plugin package. This solves the following warning: WARNING: QA Issue: gst-plugin-bluetooth: Files/directories were installed but not shipped /lib /lib/systemd /lib/systemd/system /lib/systemd/system/bluetooth.service [installed-vs-shipped] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-06connman: upgrade to 1.26Cristian Iorga1
- WiFi P2P support in ConnMan has been significantly improved; - Applications can now register WiFi Display, UPnP or Bonjour P2P services; - Various bug fixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-04iproute2: backport a patch to make adding vxlan link successRoy.Li2
If without this patch: $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 Error: argument "vxlan0" is wrong: Unknown device $ With this patch; $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 $ ifconfig -a |grep vxlan0 vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20 $ Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-04bind: fix to use correct environment file in service fileChen Qi1
Use /etc/default/bind9 as the environment file in named.service. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-30wpa_supplicant: Improve rebuild handlingRichard Purdie1
Due to the split level nature of the wpa_suppliant sources, the standard clean methods don't work. This change ensures it picks up on changes to configuration. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-10-24nfs-utils: fix start-statdRoy.Li2
1. add /bin to PATH of start-statd, otherwise systemctl can not be found. 2. drop error when systemd fails to start statd.service; since if it failed, rpc.statd will be called directly. Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-24nfs-utils: fix a Gcc undefined behaviorRoy Li2
Calling strncpy with NULL second argument, even when the size is 0, is undefined behavior, which leads to GCC to drop the check old variable with NULL in following code. https://bugzilla.yoctoproject.org/show_bug.cgi?id=6743 Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-18openssl: upgrade to 1.0.1jRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-18openssh: avoid screen sessions being killed on disconnect with systemdPaul Eggleton1
Tell systemd just to kill the sshd process when the ssh connection drops instead of the entire cgroup for sshd, so that any screen sessions (and more to the point, processes within them) do not get killed. (This is what the Fedora sshd service file does, and what we're already doing in the dropbear service file). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-10-10wpa-supplicant: fix for rebuildRobert Yang1
Fixed when rebuild: make: *** No rule to make target `/path/to/old//sysroots/qemux86-64/usr/lib/dbus-1.0/include/dbus/dbus-arch-deps.h', needed by `dbus/dbus_old.o'. Stop. The .d files save the path of the dependencies files which may not exist when rebuild, we can remove them to make the rebuild work. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 16:17:13 +0000