summaryrefslogtreecommitdiff
path: root/meta/recipes-connectivity/iproute2
AgeCommit message (Collapse)AuthorFiles
2015-09-28iproute2: fix the configure processChen Qi1
Previously, the iproute2's configure script is actually run in the do_compile stage. There's a Makefile rule 'all: Config' which makes the configure process run to generate the Config file. However, this makes it hard to fix the dependency problems. We need to generate the Config file in the do_configure stage. Add do_configure_append to separate the configure process from the compile process. Besides, explicitly disable ATM support for iproute2, otherwise we'll sometimes meet errors like below when building. ld: cannot find -latm collect2: error: ld returned 1 exit status Makefile:154: recipe for target 'q_atm.so' failed make[1]: *** [q_atm.so] Error 1 Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-02iproute2: upgrade to 4.1.1Cristian Iorga2
libelf is now a build dependency. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-25iproute2: upgrade to 3.17.0Cristian Iorga2
0001-ip-link-Remove-unnecessary-device-checking.patch removed, included upstream. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
2014-11-04iproute2: backport a patch to make adding vxlan link successRoy.Li2
If without this patch: $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 Error: argument "vxlan0" is wrong: Unknown device $ With this patch; $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 $ ifconfig -a |grep vxlan0 vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20 $ Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-08-31iproute2: upgrade to 3.16.0Cristian Iorga1
Bugfixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-06-24iproute2: upgrade to 3.15.0Cristian Iorga1
The main new features are: * ss gets more attention * Support for HHF qdisc * Updates to bridge command * Lots of vxlan related changes * Lots of little corrections and build fixes. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-25iproute2: upgrade to 3.14Cristian Iorga2
- switched to ${BP} variable; - removed parallel make restriction; Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-06iproute2: split out package for tcPaul Eggleton1
tc (the IP traffic control utility) isn't often used and makes up a reasonably large part of the iproute2 package as well as having a runtime dependency on iptables, so split it out into its own package. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-14iproute2: upgrade to 3.12.0Cristian Iorga1
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-04iproute2: de-bash its scripts to remove the bash dependencyChen Qi2
If we build a minimal image with iproute2 installed, the following error will appear during rootfs. error: Can't install iproute2-3.10.0-r0.0@i586: no package provides /bin/bash The problem is that iproute2 has an implicit dependency on 'bash'. This dependency is from per-file dependency checking. Patch two scripts, ifcfg and rtpr, from iproute2 to remove the bash specific syntax. [YOCTO #5415] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30iproute2: upgrade to 3.11.0Cristian Iorga1
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-30iproute2: upgrade to v3.10.0Cristian Iorga1
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-07-18iproute2: Fix alternative link for ip commandYi Zhao1
In busybox the default location of symbolic link for command ip is /sbin/ip. But in iproute2, the alternatvie link for ip is /bin/ip. It will cause an error when running update-alternatives: Cannot register alternative ip to /bin/ip since it is already registered to /sbin/ip. [YOCTO #4855] Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-12iproute2: upgrade to 3.9.0Cristian Iorga6
patches removed; already included in upstream. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-07iproute2: Fix build failure on ppc64Ting Liu4
Backport three patches from upstream for ppc64: http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git ae70d96 ipntable: more fixes for ppc64 a55a8fd fix dependency on sizeof(__u64) == sizeof(unsigned long long) a7c2882 ip: fix ipv6 ntable on ppc64 Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-04iproute2: Fix build failure on ppcKhem Raj2
Latest version bump started failing for ppc32 attached patch is a backport from 3.9-rc1 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01iproute2: don't use the kernel header treeSaul Wold1
This should compile against the userspace safe kernel headers Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-02-28iproute2: upgraded to 3.8.0Cristian Iorga2
- cross-compiling patch adapted to new source code Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-01-16iproute2: upgrade to v3.7.0Cristian Iorga3
configure-cross patch is now simplified. sysroot is now properly set. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-12-31iproute2: DEPENDS on iptablesSaul Wold1
Make sure iproute rebuilds when iptables is updated Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-11-24iproute2: pass CFLAGS to Makefile\Joe Slater1
Makefile computes CFLAGS, but we can see that our defaults get included by using CCOPTS to pass them to make. Upstream-Status: Pending Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-26iproute2: Use configured values for ${base_sbindir} and ${libdir}Phil Blundell2
These were previously being hard-coded to "/sbin" and "/usr/lib" respectively, resulting in unpackaged files if the configured values were something else. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-03iproute2: upgrade to 3.5.1Constantin Musca2
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-17iproute2: upgrade to 3.5.0Constantin Musca2
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-19iproute2: upgrade to 3.4.0Cristian Iorga5
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-03-19iproute2: fix unpackaged files warningPaul Eggleton2
Fixes the following warnings: WARNING: For recipe iproute2, the following files/directories were installed but not shipped in any package: WARNING: /lib WARNING: /lib/tc Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2012-01-24iproute2: upgrade to 3.2.0Shane Wang3
This patch is to upgrade iproute2 to tag 3.2.0. And the tag is not fully testd by the upstream and has build error. We use the next commit of tag 3.2.0 which fixs the error. Signed-off-by: Shane Wang <shane.wang@intel.com>
2011-11-30iproute2: Upgrade from 3.0.0 to 3.1.0Mei Lei2
Signed-off-by: Mei Lei <lei.mei@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-07iproute2: update to 3.0.0 to fix build with updated iptablesKoen Kooi4
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
2011-08-04SRC_URI, S: use BPN instead of PN for multilib caseYu Ke1
in multilibcase, PN has multilib prefix, so it is not correct to use PN in SRC_URI and S. instead, we've dedicately pruned multilib prefix in BPN, so BPN is the right alternative for PN. Signed-off-by: Yu Ke <ke.y@intel.com>
2011-06-09iproute2: update to 2.6.38Paul Eggleton2
Fixes "ip route get" not producing any output (a regression in 2.6.35). See http://marc.info/?l=linux-netdev&m=129442470405398&w=2 and http://marc.info/?l=linux-netdev&m=130038222321440&w=2 for a list of other changes since 2.6.35. Fixes [YOCTO #1006] (reopened) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-05-13update patch upstream statusQing He1
This patch includes the update of patch upstream status of the following recipes (50 in all): grub pciutils setserial dhcp iproute2 libnss-mdns nfs-utils openssl portmap busybox coreutils dbus dropbear ncurses readline sysfsutils sysvinit tinylogin udev update-rc.d util-linux elfutils file pkgconfig syslinux ubootchart yaffs2 findutils gamin hdparm libaio libzypp parted procps sat-solver screen sed sysklogd tcp-wrapper time zypper attr boost createrepo gnutls hal js libgcrypt libnl libusb-compat Signed-off-by: Qing He <qing.he@intel.com>
2010-12-09SRC_URI Checksums AdditionalsSaul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2010-11-14iproute2: update LIC_FILES_CHKSUMSaul Wold1
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
2010-11-14iproute2: upgrade to version 2.6.35Qing He2
from 2.6.34 Signed-off-by: Qing He <qing.he@intel.com>
2010-10-11recipes-connectivity: Cleanup package descriptions and summariesMark Hatle1
[BUGID #281] Evaluate and update each package in recipes-connectivity to ensure they have a consistent summary and description. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2010-09-27iproute2: Disable PARALLEL_MAKESaul Wold2
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
2010-09-01packages: Separate out most of the remaining packages into recipesRichard Purdie3
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>