Age | Commit message (Collapse) | Author | Files |
|
If the documentation needs to rebuild then it will fail as the syntax isn't
valid with modern texinfo. Backport a patch from git to fix the syntax.
[ YOCTO #9306 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A sensible assumption is that BSPs have a USB keyboard and mouse connected
unless told otherwise, so flip the logic in the formfactor config script that
previously assumed that a keyboard was not connected by default.
[ YOCTO #9174 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
usbutils was only compatible with systemds udev, since we now
provide a udev alternative compatible with upstream systemds udev,
we can now use the newer version of usbutils along with it too.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
grub contains it's own internal lzma library. Attempting to build grub against
the system liblzma shared library or header files is not likely to end well.
This change does not cause a floating dependency since all grub2.inc based
recipes pass "--enable-liblzma=no" to configure.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
grub2 creates its own set of -nostdinc / -isystem / -ffreestanding
CFLAGS and OE's default BUILD_CFLAGS (assigned to CFLAGS for native
builds) etc, conflict with that.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The grub2 configure script uses variables such as TARGET_CFLAGS etc
for its own purposes. Remove the OE versions from the configure
environment to avoid conflicts.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Beaglebone Black boot started failing after upstream patch 755324c432f, and was
fixed in 7205442e6. Unfortunately, the u-boot upgrade from 2015.10 to 2016.01
only includes the former patch. The latter patch is backported to fix this.
Signed-off-by: Erkka Kääriä <erkka.kaaria@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switch to use KERNELORG_MIRROR.
Use .xz tarball instead of bz2 as not all kernel mirrors carry .bz2 now.
This resolves various checkuri issues on the autobuilder infrastructure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
apmd was using foo.o in Makefile dependencies but if libtool is being used then
those are the statically linked intermediate files. When static libraries are
globally disabled they won't be generated by libtool-cross so the build fails.
Instead, use the libtool intermediate wrapper .lo files so the build succeeds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need machconfig file to automatically choose between physical and virtual
keyboards.
[YOCTO #9027]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The openssl recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing patch wasn't fixing one issue it claimed to and seemed
incorrect in relation to the other.
This patch correctly addresses the parallel make issue, as seen on
our autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is inspired by musl porting, where grub's configure is enabling
largefile support based on glibc versions, instead an upstream patch
turns it into autoconf check
Update git version recipe
arm platforms use this recipe to provide grub and it needed fixes from
upstream so upgrade to latest tip of git and forward port patches as
well as drop the ones already applied upstream
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
2.0.25 -> 2.0.26
a) Fixed an out of tree build error with musl
b) Updated HOMEPAGE and BUGTRACKER info
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix error like below
| apmd.c:372:41: error: use of undeclared identifier '__WCOREFLAG'
| status = __W_EXITCODE(0, SIGTERM) | __WCOREFLAG;
| ^
| apmd.c:392:41: error: use of undeclared identifier '__WCOREFLAG'
| status = __W_EXITCODE(0, SIGTERM) | __WCOREFLAG;
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
parallel build patch was removing dependencies on .c files mistakenly
just adding src/yacc_config.h to dependencies in existing rule should
have fixed the original build race
include sys/types.h in lex_config.l for getting u_long definition
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Upgrade U-Boot to latest version and drop upstreamed patches.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The currnet patches in OE-core doesn't have the "CVE:"
tag, now part of the policy of the patches.
This is patch add this tag to several patches. There might
be patches that I miss; the tag can be added in the future.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=451d80e52d851432e109771bb8febafca7a5f1f2
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg
isn't needed in most cases, we can remove them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The U-Boot 2015.10 has been released at October 20th 2015. This also
removes the GCC workaround, for the inline behavior, as this version
properlu supports the GCC 5.2 as compiler.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The code is creating more abstract types which is nice however it should
be using standard defines from stdint.h and not random defines to base
its own type system
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This helps compiling the code with older gcc especially on older build
hosts, additionally clang advertizes itself as gcc 4.2.1 so it helps
compiling dependent modues using clang as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gummiboot uses -mno-sse so we should disble using sse for mfpmath as
well
Fix syntax errors in struct defines
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix a variety of problems such as typos, bad punctuations, or incorrect
Upstream-Status values.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for U-Boot recipes to install and deploy the generated ELF
files for each config. The U-Boot ELF's are useful for debugging, and
booting (directly booting, e.g. by JTAG or using QEMU) and complement
the generated binary image.
This additional feature is disabled by default, machines/etc that want
to use it need to set UBOOT_ELF to the corresponding ELF file (generally
u-boot or u-boot.elf depending on the architecture)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch fixes the following error:
.../lib/arm/setjmp.S:18: Error: unrecognized symbol type ""
.../lib/arm/setjmp.S:26: Error: unrecognized symbol type ""
The problem is the assembly syntax that is used is not portable to ARM,
where the '@' symbol is a comment:
> Note on targets where the @ character is the start of a comment
> (eg ARM) then another character is used instead. For example the
> ARM port uses the % character.
(From https://sourceware.org/binutils/docs-2.25/as/Section.html#Section)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When building with a merged /usr dir the udev directory
lives at /usr/lib/udev - update the FILES pattern to also
pick up udev files installed two levels below the / to
ensure a merged /usr works.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: c731ecab0a6cb31198ec8270dc9381b14964dd3c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An additional use case of UBOOT_CONFIG is when a machine has applicability
to boards of the same architecture but different in other ways
to require a different UBOOT_BINARY build.
The UBOOT_CONFIG default value can be a list of these board types.
For example:
UBOOT_CONFIG ??= "boardA boardB"
UBOOT_CONFIG[boardA] = "boardA_defconfig"
UBOOT_CONFIG[boardB] = "boardB_defconfig"
Change do_install and do_deploy sections which process a UBOOT_CONFIG list
to create short symbolic links to each of the config types for UBOOT_BINARY.
This is similar to the links currently being created for
SPL_BINARY when it is defined with a UBOOT_CONFIG list.
For the above example, and UBOOT_BINARY as u-boot.bin,
the additional symbolic links created in the DEPLOYDIR would be
u-boot.bin-boardA
u-boot.bin-boardB
Signed-off-by: Lee Nipper <lee.nipper@linux.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This basically means replacing a "-14" Debian patch with "-15" patch.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sbsigntool depends on gnu-efi and we need sbsigntool-native to do some signing, so extend gnu-efi to support that.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The gcc 5 change its default standard from gnu89 to gnu11. These two
standards do have different semantics for inline functions. And the
gcc 5 will emit the following errors on the "extern inline" functions:
arch/powerpc/cpu/mpc8xxx/fsl_lbc.o: In function `ld_le16':
./arch/powerpc/include/asm/byteorder.h:12: multiple definition of `ld_le16'
arch/powerpc/cpu/mpc8xxx/fdt.o:./arch/powerpc/include/asm/byteorder.h:12: first defined here
Fix these build errors by using "-fgnu89-inline" to enforce the gnu89
inline semantics as suggested in [1].
[1] https://gcc.gnu.org/gcc-5/porting_to.html
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This upgrades the U-Boot and its related recipes for the 2015.07
release.
The following recipes has been upgraded:
- u-boot
- u-boot-mkimage
- u-boot-fw-utils
The patches which were applied on top of the 2015.01 release are
dropped as those are not needed in this release.
The license checksum update was due minimal changes in the text, those
have no impact in the license terms.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The building failure still display after upstream commit 055a5bbfc[
pcmciautils: fix for parallel build], so refix it.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
Compiling lex_config.c.
src/lex_config.l:34:25: fatal error: yacc_config.h: No such file or directory
There was a patch for fixing the paralle issue before, so modify the
patch again.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current grub2 fails on loading large initrd file (> 500M) since
the initrd size is added to the addr_min and causes the failure.
Fix it by picking a patch from grub2 upstream.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
Assembler messages:
Fatal error: can't create runtime/rtlock.o: No such file or directory
Assembler messages:
Fatal error: can't create runtime/rtdata.o: No such file or directory
Assembler messages:
Fatal error: can't create runtime/vm.o: No such file or directory
Assembler messages:
Fatal error: can't create runtime/efirtlib.o: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
43 does not compile with gcc-5
Refresh objcopy patch to incorporate latest changes
Change-Id: Ied41ed1335bb1db3438b98121e05c22242a8a13e
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc-5 is stricter and complains about const to non-const
conversions, we backport the patch from upstream into 2.00
Change-Id: I17db365fdd253daaa1ab726e2a70ecad0ac7b2ae
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change-Id: I5322f1ff8653009b45ddee1a2d3a0d96584d3327
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|