Age | Commit message (Collapse) | Author | Files |
|
* Use the official src rather than debian.
* It doesn't have a general license file, the license is embedded in the
files, which are "GPLv2+ | BSD-2-Clause".
* Supported aarch64 and arm.
* Remove parallel-make.patch that was accepted upstream. (From Saul)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The latest version of usbutil (v008) uses the latest version of udev (v196 or greater)
which is only available as part of the systemd package. So add systemd as a DEPENDS and
REQUIRED_DISTRO_FEATURE.
Add v008 version of iconv.patch
COPYING file is GPLv2, but has newer formatting and address change.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Make grub, grub-efi grub_git use a grub2.inc to reduce the duplicated code.
* Make grub and grub-efi use the same patches since they use the same
source. (grub_git is different).
* grub-efi:
- Use autotools to replace autotools-brokensep
- Remove the DEPENDS of freetype, it should be a RDEPENDS.
- Remove grub-2.00-ignore-gnulib-gets-stupidity.patch since it is a
duplication of remove-gets.patch.
- Make grub-efi.rpm contain files rather than make an empty package.
* grub_git:
- Fix a SSE build failure.
[YOCTO #6310]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Default PACKAGECONFIG value to "hwdb" if 'systemd' is in DISTRO_FEATURES.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add PACKAGECONFIG for 'hwdb' to fix the following QA warning.
WARNING: QA Issue: libpci rdepends on libudev, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: pciutils rdepends on libudev, but it isn't a build dependency? [build-deps]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lib-build-fix.patch is removed as it doesn't seem useful.
do_compile_prepend is removed because it's not useful for the new version.
The following line is removed as I don't see any problem without it.
PARALLEL_MAKE = ""
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
u-boot doesn't really support building its tools for the target, as they are
built with HOSTCC compiler, which is also used to compile fixdep utility
that gets executed during the build. Since it might be beneficial to have a
target version of mkimage, let's hack it to build fixdep in a separate step.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pci/config.h conflicts between 32-bit and 64-bit versions.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
An issue was found where when yocto is installed to a hard disk
from a live USB key, no matter what boot order was selected in
the BIOS menu, the grub menu of the USB key would always show
up. The issue was narrowed down to the way grub configuration
file gets embedded into the standalone bootx64.efi image.
The commit prepends ($cmdpath) to the search path for grub.cfg,
thus making sure the UEFI environment itself sets this to the
correct device path. This in-turn lets the grub.cfg of the boot
device to be loaded.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Drew Moseley <drew_moseley@mentor.com>
Tested-by: Ravikiran Polepalli <Ravikiran_Polepalli@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We should use ${PN} instead of 'acpid' for SYSTEMD_SERVICE, otherwise
we would have the 'installed-not-shipped' QA error if multilib is enabled
and we run `bitbake lib32-acpid'.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
Khem fixed grub, but the grub-efi also needs it, the patch can't apply
to grub-efi, so made a new patch for it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality has been implemented internally
in systemd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality of the init script has implemented
in systemd internally.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'keymaps' package actually doesn't have runtime dependency on
VIRTUAL-RUNTIME_initscripts, thus removing this dependency.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For acpid needs to upgrade to work correctly with the new kernel.
The new version now uses autotools.
Also add systemd unit file.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit' is not in DISTRO_FEATURES.
The functionality of the init script 'fbsetup' is implemented internally in
systemd. So fbsetup is not installed if 'sysvinit' is in DISTRO_FEATURES.
That's why we need to set INHIBIT_UPDATERCD_BBCLASS to "1" to avoid
generation of update-rc.d related preinst/postinst scripts.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only install 'keymap.sh' script if 'sysvinit' is in DISTRO_FEATURES.
This is because systemd internally provides a mechanism to implement
the functionality this script tries to implement. Please see
systemd-vconsole-setup.service for more details.
Also we set 'INHIBIT_UPDATERCD_BBCLASS' to "1" if 'sysvinit' is not
in DISTRO_FEATURES.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As alsa-state inherits update-rc.d, the update-rc.d part inpostinst script
has already been handled in update-rc.d.bbclass.
Besides, we need to set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit'
is not in DISTRO_FEATURES. This is because the init script is not installed
in such situation, adding update-rc.d part in the preinst/postinst scripts
just makes no sense.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Avoid building and packaging of sparc64 specific files in the x86 builds.
Fixes Bug:
[YOCTO #6427]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bash script:
pm-utils/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The /etc/init.d/fbsetup script doesn't have any effect in a systemd
image. Its purpose is to load the uvesafb kernel module at boot.
This functionality could be achieved by adding a configuration file
under /etc/modules-load.d/ directory which would be parsed by the
systemd-modules-load.service.
[YOCTO #4420]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The /etc/init.d/alsa-state is totally useless for a systemd image.
Its functionality has been replaced by alsa-state.service files.
So if 'sysvinit' is not in DISTRO_FEATURES, installing this script doesn't
make any sense.
[YOCTO #4420]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixed:
make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `crc32.o'. Stop.
make: *** Waiting for unfinished jobs....
ERROR: oe_runmake failed
This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't
regenerated when recompile, the content of it are:
[snip]
crc32.o: /path/to/sysroot/4.9.0/include/stddef.h
[snip]
And Makefile includes the .depend file if it exists, so there would be
errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist.
Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix
the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A previously upstreamed patch has been applied. Bump the version to
incorporate this upstream update.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix tftp stalls on loading files bigger than ~32k bug by cherry picking
a patch from grub upstream.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #6526]
setserial needs groff-native to build
Signed-off-by: Jonas Zetterberg <jonas.zetterberg@windriver.com>
Signed-off-by: Yue Tao <yue.tao@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a '\n' to the last line of the file to fix:
No newline at end of file
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The on-target fw_printenv and fw_setenv needs configuration file
(fw_env.config) to be present in the target.
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
SRC_URI_append_overo = "file://uEnv.txt"
UBOOT_ENV_overo = "uEnv"
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes a build warning which is promoted to an error via -Werror.
changes from v1:
* put "Upstream-Status" in patch itself, not in OE patch header
* fix commit wording
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes a compatibility issue between v86d
and SeaBIOS VGA BIOS where the leal instruction
is not decoded properly. Read the
http://thread.gmane.org/gmane.comp.emulators.qemu/271806
thread for more details.
Patch taken from upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|