summaryrefslogtreecommitdiff
path: root/meta/lib
AgeCommit message (Collapse)AuthorFiles
2017-04-05selftest/devtool: skip test in case of poky-tiny distroLeonardo Sandoval1
The recipe being tested (devtoo-test-patch-gz) by devtool has dependencies (at least libxres and virtual/libx11) that cannot be built with poky-tiny distro so skip the test for this particular policy. [YOCTO #10891] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-05selftest/recipetool: replace fedorahosted.org SRC_URI with github.com sourceChoong YinThong1
fedorahosted.org was retired on March 1st, 2017. This is to update the SRC_URI to point to github.com. [YOCTO #11226] Signed-off-by: Choong YinThong <yin.thong.choong@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-05runtime/dnf : Add ID to the dnf test casesJose Perez Carranza1
Add the corresponding Testopia ID to the test cases for dnf Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05selftest/devtool: use kernel provider instead of recipe allowing other ↵Leonardo Sandoval1
kernel providers To generalize the unit test for other kernel providers, use virtual/kernel instead of linux-yocto, allowing to run the selftest on non-poky distros, i.e. poky-tiny. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-05selftest/commands: extend variable regex to include A_B variable notationLeonardo Sandoval1
This change allows quering for variables with the format A_B, i.e. PREFERRED_PROVIDER_virtual/kernel instead of just A. Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31selftest/pkgdata: replace the glibc recipe allowing execution on non-poky ↵Leonardo Sandoval1
distros Replace the glibc recipe for zlib on unit tests, otherwise tests are restricted to glibc distros (poky). [YOCTO #10890] Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-31wic: remove prepare_empty_partition_squashfsEd Bartosh1
There is not much sense in creation of empty squashfs partition. It's also not possible to create empty squashfs partition of specified size. Even more, prepare_empty_partition_squashfs method is absolutely broken. It raises exception when called and even its signature differs from the rest of of similar methods. It means that nobody uses it and it's safe to remove it. Removed prepare_empty_partition_squashfs method and testing of empty squashfs partition. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: test creation of msdos partitionEd Bartosh1
Added msdos partition to the .wks file in test_fs_types wic test case. [YOCTO #11137] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: fix incorrect fstypeEd Bartosh1
Fixed typo in wks content: squash->squashfs Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add test_image_bootpart_globbed test for wicEd Bartosh1
Test image-bootpart wic plugin with globbed value of IMAGE_BOOT_FILES variable to increase test coverage. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add kickstart_parser test caseEd Bartosh1
Added test_kickstart_parser test case to test wks parser options not yet covered by tests. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oe-selftest: add wic test case test_fs_typesEd Bartosh1
Added wic test case to test all possible filesystem types for empty and not empty partitions. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-03-31oeqa/runtime/cases: Migrate underscore casesMariano Lopez2
There were two missing cases to be migrated to the new framework: _qemutiny and _ptest. qemutiny was straightforward. ptest on the other hand wasn't working even in previous releases; it has been migrated from smart to dnf, and how ptest packages are gathered to be installed, adapted to use unicode, and removed a lot of code that wasn't needed anymore. Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa: allow persistent image writes in runqemu()Patrick Ohly4
By default, QemuRunner avoids modifying the image files that it boots into by enabling the qemu snapshot mode. However, some tests may want to test changes that must persists across reboots, so this mode should be optional. This can be combined by copying the image file to a temporary location first and then booting with that copy. It's also useful when testing with additional drives attached to a virtual machine. QemuTinyRunner doesn't use the snapshot parameter and therefore ignores the new parameter. Long term, a better way of passing these various configuration parameters should be used, and perhaps QemuRunner and QemuTinyRunner can be merged into one again to avoid code duplication. But for now the patch follows the exiting style. Also beware that QemuTarget.start() now acts in two different modes (with or without explicit launch command), and depending on that mode parameters like discard_writes must be ignored, i.e. not get passed to launch(). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa: allow customizing image used by runqemu()Patrick Ohly1
runqemu() takes all parameters for the virtual machine from the variables of the given recipe. By allowing the caller to provide a hash with variables that get applied locally, the caller gets more control. Here's the intended usage: <prepare internal-image in self.resultdir> overrides = { 'DEPLOY_DIR_IMAGE': self.resultdir, 'IMAGE_LINK_NAME': 'internal-image-%s' % self.image_arch, } with runqemu('refkit-installer-image', ssh=False, overrides=overrides) as qemu: .... This can be used to replace the image completely with something else or to copy it before allowing runqemu() to write into it. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa: allow extending qemuparams="..."Patrick Ohly1
Sometimes it is useful to reconfigure the qemu virtual machine directly. runqemu has the "qemuparams" parameter for that, and the underlying start() methods also supported modifying that via their "params" parameter. Only the runqemu() wrapper function lacked a way to specify additional parameters. One potential usage is to attach additional disks. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa: QEMU_USE_KVM can list machinesPatrick Ohly1
Previously, QEMU_USE_KVM=True enabled the use of kvm only when "x86" was in the MACHINE name. That is too limiting, because for example intel-corei7-64 can also use kvm but it wasn't possible to enable that without changing OE-core. That traditional usage is still supported. In addition, QEMU_USE_KVM can be set to a list of space-separated MACHINE names for which kvm is to be enabled. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa: tolerate interrupted select() while waiting for qemuPatrick Ohly2
Sometimes, the OEQA utility code aborts with: ... File ".../meta/lib/oeqa/utils/qemurunner.py", line 131, in start return self.launch(launch_cmd, qemuparams=qemuparams, get_ip=get_ip, extra_bootparams=extra_bootparams) File ".../meta/lib/oeqa/utils/qemurunner.py", line 259, in launch sread, swrite, serror = select.select(socklist, [], [], 5) InterruptedError: [Errno 4] Interrupted system call strace shows that this is because of a SIGWINCH: Connection from 127.0.0.1:52668 select(21, [20], [], [], {5, 0}) = ? ERESTARTNOHAND (To be restarted if no handler) --- SIGWINCH {si_signo=SIGWINCH, si_code=SI_KERNEL} --- This is related to some special conditions: * whether qemu opens a graphical console window (enabled in Poky by default) * where that window gets opened * whether the window manager changes the size of the shell window (mine is a tiling window manager and reorders and resizes windows automatically) Ignoring the interrupted system calls avoids the problem. Code elsewhere (for example, run() in ssh.py) already does the same thing. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-28oeqa/core/loader.py: Do not import underscore modules by defaultMariano Lopez1
Underscore modules are meant to be run only when manually added to the test suite, so far another mechanisms are in place to make this happen with runtime, sdk, and esdk (mostly in test* bbclasses). This will add such functionality in the core framework so other specific frameworks can take use this without adding something else. [YOCTO #10980] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-27oeqa/selftest: don't use cleanall in selftestsJoshua Lock3
* devtool: oeqa.selftest.devtool.DevtoolTests is taking 4 or more hours on the autobuilder because the cleanall call deletes the tarball of the kernel source, forcing a large clone which is especially long on an NFS mount. The cleanall invocation isn't really required here and switching to clean instead should avoid hours of re-cloning the same repository each time we run oe-selftest on the autobuilder. * buildoptions: We only need to ensure the first image isn't an incremental image, clean will suffice here. * runtime-test: no need to clean up the artefacts generated during the test, let's leave that to a higher level process rather than using the cleanall hammer. Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26runtime-test.py: fix typoRobert Yang1
roofs -> rootfs. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26oeqa.buildperf: limit the length of error outputMarkus Lehtonen1
Limit the length of error logs to 40 lines. We don't need to show/archive thousands of lines of bitbake logs if an error occurs. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26oeqa.utils.commands: limit runCmd exception outputMarkus Lehtonen1
Make it possible to limit the length of output lines shown in runCmd exceptions. E.g when running bitbake we easily get thousands of lines of log output, where only the last few (tens) are interesting or relevant when an error occurs. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26oe-build-perf-test: sum rusage in buildstatsMarkus Lehtonen1
Instead of separate rusage and child rusage values, only store their sum value in buildstats. This is a big reduction in data footprint without really losing any interesting data. Also, utilize OrderedDict to order data more logically. [YOCTO #10582] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26oe-build-perf-test: pack all buildstat in one fileMarkus Lehtonen2
Write out all buildstats into one big json file, instead of using multiple per-measurement files. Individual buildstats will be indexed using "<test_name>.<measurement_name>" as the key. Also, changes the per-testcase working directories into temporary directories that will be removed after test execution as there are no more per-testcase data files to store permanently. [YOCTO #10582] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26targetcontrol.py: use logger.info to replace of bb.noteRobert Yang2
The bb.note prints multiple same lines when invoke this class again, but if we set mainlogger.propagate = False, nothing would be printed, according to logging's document: https://docs.python.org/3/library/logging.html Note If you attach a handler to a logger and one or more of its ancestors, it may emit the same record multiple times. In general, you should not need to attach a handler to more than one logger - if you just attach it to the appropriate logger which is highest in the logger hierarchy, then it will see all events logged by all descendant loggers, provided that their propagate setting is left set to True. A common scenario is to attach handlers only to the root logger, and to let propagation take care of the rest. We may need avoid using bb.note or bb.warn in oeqa since it attaches multiple log handlers which may cause confusions This patch only sets "mainlogger.propagate = False" in selftest/runqemu.py and use logger.info to replace bb.note in targetcontrol.py to minimize the impact. [YOCTO #10249] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26selftest/runqemu.py: add it to test runqemuRobert Yang1
Usage: $ oe-selftest -r runqemu Current test cases: $ runqemu nographic qemux86-64 $ runqemu nographic qemux86-64 ext4 $ runqemu nographic qemux86-64 iso $ runqemu nographic core-image-minimal $ runqemu nographic core-image-minimal vmdk $ runqemu nographic core-image-minimal vdi $ runqemu nographic tmp/deploy/images/qemux86-64 $ runqemu nographic tmp/deploy/images/qemux86-64 hddimg $ runqemu nographic qemux86-64 slirp $ runqemu nographic qemux86-64 slirp qcow2 $ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf $ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4 Need more later: - Test initramfs - Test nfs - Test when set DEPLOY_DIR_IMAGE and OECORE_NATIVE_SYSROOT - And others which similate runqemu runs on SDK and eSDK. [YOCTO #10249] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26qemurunner.py: fix handling of runqemuparamsChen Qi1
The launch() doesn't need runqemuparams, we need handle it in start(). Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26oeqa/targetcontrol.py: modify it to test runqemuRobert Yang3
Modify the following files to test runqemu: targetcontrol.py utils/commands.py utils/qemurunner.py We need simulate how "runqemu" works in command line, so when test "runqemu", the targetcontrol.py, utils/commands.py and utils/qemurunner.py don't have to find the rootfs or set env vars. [YOCTO #10249] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-26qemurunner: configurable timeout for run_serial()Patrick Ohly3
Some commands might need to run longer than the default timeout of five seconds. If that occurred, run_serial() returned with a status code of zero (sic!) and no other indication of what went wrong. Now the timeout is configurable (with five still the default) and an explicit warning ("<<< run_serial(): command timed out after 5 seconds without output >>>") gets appended at the end of the data returned to the caller. While at it, the logic for checking for the timeout was updated a bit because both implementations could overshoot the timeout when entering select() right before the final deadline. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-23package_manager.py: respect OPKGLIBDIRMartin Jansa1
* respect it for incremental rootfs generation * add lists_dir option to opkg.conf * also fix setting info_dir and status_file when they use default value, the problem is that self.opkg_dir is already prefixed with rootfs directory, comparing it with /var/lib/opkg always returned false and the options were appended to config file unnecessary * with opkg 0.3.4 we can use VARDIR prefix added in: commit d2a8e23dc669adc398f4bb8bcfcabfcf925708f7 Author: Florin Gherendi <floring2502@gmail.com> Date: Mon Dec 19 12:25:38 2016 +0200 libopkg: make the /var and /etc directories configurable at compile time. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-23rootfs.py: Respect OPKGLIBDIR variableMartin Jansa1
* when OPKGLIBDIR doesn't have the default /var/lib value it will silently fail to copy package database from normal rootfs to debugfs rootfs and then when trying to install *-dbg complimentary packages it won't install anything, because installed_pkgs.txt file generated from debugfs is empty Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-22sign_rpm.bbclass: do not set/use RPM_GPG_PUBKEYAlexander Kanavin2
This is entirely unnecessary (we can ask the signer backend to export the key to a file when needed), and was causing confusing selftest failures due to the variable being set from two different places. [YOCTO #11191] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-22oeqa: use WORKDIR/oe-testimage-repo to look for RPM packagesAlexander Kanavin1
Using RPM deploy dir was causing errors when pre-built images were used with these steps: https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project [YOCTO #11173] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-22oe-selftest: add test_rawcopy_plugin test caseEd Bartosh1
This test case builds wic image using rawcopy plugin running wic directly. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-22selftest: pylinted wic test suite.Ed Bartosh1
Fixed long lines, indentation and one unused variable. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-22oe-selftest: test wic rawcopy pluginEd Bartosh1
Added test_rawcopy_plugin_qemu test case and wks template. This test builds ext4 rootfs image, copies it to the root partition of the wic image using rawcopy plugin and boots wic image in qemu. [YOCTO #10618] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21oeqa/selftest/devtool: Enable missing cleanupRichard Purdie1
Not sure why this cleanup is disabled but it clearly should be running so enable it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21wic: selftest: add tests for --fixed-size partition flagsMaciej Borzecki1
wic has a new flag for setting a fixed parition size --fixed-size. Add tests that verify if partition is indeed sized properly and that errors are signaled when there is not enough space to fit partition data. Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21wic: selftest: do not assume bzImage kernel imageMaciej Borzecki1
Instead of assuming that bzImage is available, query bitbake enviroment for KERNEL_IMAGETYPE. Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21wic: selftest: avoid COMPATIBLE_HOST issuesMaciej Borzecki1
Wic tests will unconditionally attempt to build images that may require dependencies that are incompatible with current target. Resolve this by consulting HOST_ARCH first (which defaults to TARGET_ARCH) before proceeding to build images that may be incompatible. A convenience decorator only_for_arch() can be used to skip test cases for specific architectures. Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21selftest: wic: replace directdisk with wictestdisk where possibleMaciej Borzecki1
Use wictestdisk instead of directdisk thus allowing more tests to be run on non-x86 compatible machines. Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21oeqa/selftest: remove test_sanity_unsafe_binary_referencesRoss Burton1
This test was attempting to exercise a broken test, for some reason this broke with patches under review but investigation revealed that the test itself is broken. The test has been removed, so there's no need to test it. Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21oe-selftest: tinfoil: add tests for recently enabled datastore operationsPaul Eggleton1
A recent patch to bitbake fixes these datastore operations so that they actually affect the server end, so we should test that they work. (For full disclosure, some of these tests would probably pass without those fixes, since the operation would be done on the client side instead - but we are at least exercising the code paths.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21meta/lib/oeqa: change sdk test from cvs to cpiobrian avery2
We currently fetch,configure,build, and install cvs as our test for the sdk. cvs unfortunately, requires a default editor in order to run. The change in 94790a8254d6 that checks to see if you have something like vi installed is fragile since you may have a different default editor. This patch switches from using cvs as a test to using cpio. cpio also uses autotools so the functionality tested is equivalent. Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21selftest/devtool: Add test to verify "modify virtual/kernel"Jose Perez Carranza1
The purpose of this test case is to verify that devtool modify works correctly when building the kernel. [YOCTO #10817] Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-21meta: replace uses of bb.data.expand(VARNAME, d) with d.expand(VARNAME)Joshua Lock1
bb.data.expand(x, d) is deprecated API. [YOCTO #10678] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21qemurunner: configure guest networkingEd Bartosh1
Configured guest network interface through serial connection when kernel is not run by qemu. This should make it possible to test wic images with testimage. [YOCTO #10833] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21qemurunner: get network params from runqemu outputEd Bartosh1
Parsed runqemu output to get guest network configuration if it's not present in runqemu command line. [YOCTO #10833] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-17oe/path.py: fix for "Argument list too long"Robert Yang1
Issue: LIN9-1648 Fixed when len(TMPDIR) = 410: $ bitbake core-image-sato-sdk [snip] Subprocess output: /bin/sh: /bin/cp: Argument list too long ERROR: core-image-sato-sdk-1.0-r0 do_rootfs: Function failed: do_rootfs [snip] This is because "copyhardlinktree(src, dst)" does "cp -afl src/* dst", while src/* is expanded to "src/file1 src/file2, src/file3..." which causes the "Argument list too long", use ./* as src and change cwd in subprocess.check_output() to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-05 00:36:53 +0000