| Age | Commit message (Collapse) | Author | Files |
|---|
|
Test case ID 1422 is not correct for this issue, the correct test
case ID for test_qemu is 1424.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Mount a '/media' partition to wic-image-minimal.wks with a known UUID.
- In test_qemu, sort our output from checking the output of 'mount' as
it may not be stable. Also, do not check the exit code as passing any
output to cut ensures a 0 exit code.
- Check for a 'UUID=' line in /etc/fstab with out expected output.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that both QEMU_USE_KVM = "True" and "1" will work.
[YOCTO #12343]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
acinclude.m4 is about to be removed from the lzo recipe which breaks
test_devtool_update_recipe_local_files_2. Create a synthetic recipe in
meta-selftest with some local files and use that instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Minor grammar correction along with making the term 'login banner'
consistent throughout to make searching logs easier.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current logging always assumes the boot timeout has expired yet
there is a second reason we might have ended up in a position where no
login banner was found, that being a socket disconnect. Add logging
for the disconnect case and make the timeout expiration conditional on
the timeout being exhausted.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When debugging issues when timeouts are involved it is always best to
have wall clock times included. This helps give confidence that the
timeout is in fact run down at the right rate and that no unexpected
events were the true cause of a premature running down of the
timeout. Having these times in old logs also helps when debugging
issues as we have a historic record as to what is a 'typical' time to
complete an action.
In addition to adding the wall clock times the time to 'login' is now
printed making it consistent with the time to 'qemu pid'.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Remove the redundant backslash in template layer.conf file, otherwise,
the bbappend line setting wouldn't have effect, causing bbappend files
in these created layers not having any effect.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This function is not used by any classes or recipes that I can find, so lets
delete it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
DNF has a time-based cache policy (and a great sense of humour) so it's possible
that 'dnf makecache' won't actually refresh any caches. Force the cache updates
by passing --refresh.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Update the packages and file names to reflect the new postinst recipe.
Fix a sh syntax error in the run_serial file exists test which was hidden by a
logic problem in the status code.
Remove the older test_verify_postinst as it's effectively a subset of
test_postinst_rootfs_and_boot, and doesn't work: when booting under systemd the
strings it searches for are not output to the console, but the test still
passes.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
get_bb_vars was using variables.copy() to duplicate the list of variables passed
but this function only exists in lists [1,2] and not tuples (1,2).
Instead of throwing an exception if the variables are in a tuple, simply
construct a new list using the passed sequence-like object.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Specifically:
1) remove +git${SRCPV} stuff from comparison and output; it's just
unnecessary clutter;
2) write the commit id of the latest version tag into the output;
this saves quite a bit of trouble of manually checking what that
commit id is when doing version updates;
3) when UPSTREAM_CHECK_COMMITS is set, ignore the tags altogether;
instead check if the latest commit is different to the one we use,
and if so, report that the recipe can be updated to said commit
(which is also written into the output, as in 2). Multiple
recipes are failing the upstream check because they never
issue tags, now we can fix them.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I have concerns that bad timing of the flow of data from the logger
might corrupt the output due to the way binary strings are handled
in qemurunner.
This simplifies the code to do the same thing it did before but much
more safely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you're not sure what changes devtool finish is going to make, or
you're not sure you're finished with your modifications, it is useful to
be able to see what devtool finish is going to do beforehand, so add
a -N/--dry-run option to make that possible.
(It's also very useful for debugging devtool finish itself.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool upgrade did not properly handle setting SRC_URI checksums for
recipes that use named SRC_URI entries and also use those names in the
SRC_URI checksums. A further complication was where the name contained
an expression that changed with the version e.g. ${PV} (probably quite
rare, but the dnsmasq recipe in meta-networking is currently one such
recipe.) All of these are now handled properly.
Additionally, drop the _get_checksums() function that wasn't being
called from anywhere in the code.
Note that this now turns nowrap_vars in recipeutils.py to be a list of
regexes, hence things such as [ and ] need to be appropriately escaped.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a value was split over multiple lines (e.g. as SRC_URI usually is)
then we were inserting the value as one item in the lines list with
newlines between each line. There's nothing wrong with this if you're
writing the list out to a file, but if you want to generate a patch (as
patch_recipe_file() will do if the patch parameter is set to True) then
the diff output looks a bit odd. Split the value before adding it to the
lines list to resolve this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
find_layerdir() should really return absolute paths, so make it do so.
This fixes devtool finish not deleting files it should do after devtool
upgrade if the specified path is relative, since the devtool finish code
was assuming that find_layerdir() was returning an absolute path.
Fixes [YOCTO #12318].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The value could be False in which case we should pass that through.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This further cleans up the output of oe-selftest so that runqemu output
is hidden unless tests fail.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This ensures the console is kept clear of confusing output but that
the main logs contain good debugging information.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The logger handling in oeqa was confused at best. This patch:
a) Passes in a logger through various qemu runner pieces
b) Uses that logger consistently in the code
c) Creates a logger for QemuRunner outside the bitbake namespace
meaning we don't conflict with the tinfoil logging changes
The result of this is more consistency. For runtime tests in testimage,
the logs always contain the debug info, nothing is shwon on the console.
For the oe-selftests, logs are intercepted and only shown if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake logs info messages to the console. These messages are really
there as debugging information. At the debug level, they will be shown
in failure logs and in the task logs but not on the console which
is what we want in this case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This funciton appears completely unused, drop it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In general we don't need to see the output of runqemu however if it fails
we do. Use the buffer option that already exists in TestResult but allow
us to trigger it on a per test basis.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't remove the handler we end up with duplicate log messages
which is undesireable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current implementation is broken when the localpath is a link.
Then only a symlink would be created on the target, instead of copying
the actual file.
[YOCTO #11524]
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This matches how it is called, and how it is named in qmeu target.
[YOCTO #11524]
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The stop() function is called in the context of the masterimage,
so self.master should be used instead of self.connection which is
undefined at that time.
[YOCTO #11524]
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
On systemd systems calling reboot over an ssh connection doesn't
return as expected causing an exception, therefore wrap the call
to reboot in order to avoid this issue.
Also sync the filesystems before rebooting cause otherwise, it will be
done as part of the reboot and could take a very long time and testimage
will fail to access the machine. This issue was observed consistently with
one of our rootfs at Pelagicore.
[YOCTO #11524]
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a simple test case to being testing of the Go toolchain:
1) build meta-go-toolchain
2) create a temp directory and install the generated Go toolchain within
3) fetch an archive of the Go Dep tool
4) create an appropriately laid out GOROOT and inflate the dep archive there
5) build the dep command with the SDK's Go toolchain and check it returned
successfully.
[YOCTO #12152]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For test modules in a package, e.g., oelib.license, running
`oe-selftest -r oelib.license` or `oe-selftest -r
oelib.license.TestSimpleCombinations` would fail with a message that
the specified test cases could not be found. This was due to the
parsing in _built_modules_dict(), which failed to distinguish between
<package>.<module>.<class> and <module>.<class>.<testcase> and treated
both cases as the latter.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use a console login not SSH for simplicity.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A flaw was found on my Ubuntu 14.04.5 LTS, on which that gnome-terminal is
the default terminal, when I run any of the tasks:
bitbake busybox -c menuconfig/devshell/devpyshell
bitbake virtual/kernel -c menuconfig/devshell/devpyshell
I got a error as follows:
"Failed to execute child process "oe-gnome-terminal-phonehome" (No such file or directory)"
Seems the environment of the process calling Popen is not passed to the
child process, this behaviour is a known issue in Python bug tracker:
http://bugs.python.org/issue8557
It could be fixed by using an absolute path instead per test.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test overrides IMAGE_FEATURES but failed to include package-management,
which is essential for postinsts to work under dpkg.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With a '*' as a wildcard for the signature here we can also match a
portion of the task name with the result that we may match a sigdata
file for the wrong task. Luckily the signature is always the same
length - 32 characters - so we can simply use 32 '?' characters instead.
(A regex would have been another alternative, but the wildcard should be
effective and I felt like a regex would complicate the code more than
this solution).
Fixes [YOCTO #11763].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
|
|
|
|
When we wish to use the package feed for local development, it does
not uses GPG signed feeds by default but dnf uses package signature
check. We need to configure the GPG signature check out so it works
out of box.
With this patch, installing non-signed packages works:
$: dnf install <package>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When faced with multiple sets of licenses combined with | (OR), it was
possible for oe.license.is_included() to choose a set of licenses with
a blacklisted license and then report failure, even if choosing
another set of licenses would have resulted in a successful
result. This happened when the chosen set still contained more
whitelisted licenses than the other set.
This change makes sure a set with any blacklisted license is always
considered with a lower weight than a set with only whitelisted
licenses.
Example: Faced with the license string "GPL-3.0 & GPL-2.0 & LGPL-2.1 |
Proprietary" and with "GPL-3.0" being blacklisted, the old code would
report a failure since "GPL-3.0 & GPL-2.0 & LGPL-2.1" still contains
more whitelisted licenses than "Proprietary" does.
This change also adds a unit test for oe.license.is_included().
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To be able to better debug remove() behaviour, add more logging
to rpm calls via bb.note(). The change also makes remove() logging
more consistent with other package managers' remove() (e.g., opkg).
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With "read-only-rootfs" in IMAGE_FEATURES, packages in ROOTFS_RO_UNNEEDED
are removed when building the rootfs. The list of packages to remove is
passed to the package manager and the list is sorted so that
update-alternatives provider is the last entry. This is with the
assumption that the last entry on the list/command line is removed last.
However, it turns out rpm does not care about "last on the command
line" and update-alternatives provider is removed before other the
packages get to run their %preun scripts for update-alternatives.
This leaves broken alternative symlinks in rootfs.
The fix is to first remove all but update-alternatives provider and
after that update-alternatives provider in its own remove() call.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gpg directory
The high-level method tempfile.TemporaryDirectory give us no way to ignore erros on
removal thus use tempfile.mkdtemp instead. Ignoring possible issues on removal
is neccesary because it contains gpg sockets that are automatically removed by
the system once the process terminates, otherwise the following log is observed:
File "/usr/lib/python3.5/shutil.py", line 436, in _rmtree_safe_fd
os.unlink(name, dir_fd=topfd)
FileNotFoundError: [Errno 2] No such file or directory: 'S.gpg-agent.browser'
This is the same fix as 7e3a7cd2426feac757def81850dc44156cd0f33e, but this applies
to runtime (instead of signing).
[YOCTO #11821]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Search made with the following regex: getVar ?\((.*), True\).
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are cases where the 'while loop' waiting for login prompt fails
and the bootlog variable does not get populated, thus use the the new
qemurunner member (self.msg) which stores all output coming from the qemu
process.
[YOCTO #12113]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It contains cached metadata for a transient repository that is used
only when creating images on the host, and so is of no use on target
images. Dnf will recreate the cache on target when needed.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
GitHub dynamically generates the /archive/ tarballs but we're encoding checksums
in the test suite. Change the URL to use a static tarball, and update the
checksums.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
