| Age | Commit message (Collapse) | Author | Files |
|---|
|
When a test module wants to be skipped because it doesn't
apply to the image but it was nevertheless a required
test (one in TEST_SUITES), we issued an warning that it
was a required test and went on with running the module.
Usually all tests in the module failed (e.g gcc tests on a non-sdk image),
but this allowed us to know that something went wrong with the image
(some package/feature didn't make it).
However, instead of just issuing an warning and running the tests
it's better to throw an exception. The traceback will tell us what's wrong,
and we don't run every single test method.
Output will look like this:
--snip--
| NOTE: Test modules ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc']
| NOTE: Found 5 tests
| test_ping (oeqa.runtime.ping.PingTest) ... ok
| test_ssh (oeqa.runtime.ssh.SshTest) ... ok
| ERROR
|
| ======================================================================
| ERROR: setUpModule (oeqa.runtime.gcc)
| ----------------------------------------------------------------------
| Traceback (most recent call last):
| File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule
| skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES")
| File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule
| "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason))
| Exception:
| Test gcc wants to be skipped.
| Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES
| Test was required in TEST_SUITES, so either the condition for skipping is wrong
| or the image really doesn't have the requred feature/package when it should.
|
| ----------------------------------------------------------------------
| Ran 2 tests in 1.036s
|
| FAILED (errors=1)
| NOTE: Sending SIGTERM to runqemu
--snip--
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Downloads iptables/cvs/sudoku-savant sources and builds them on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This class can be used for test cases that configure
and build packages on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tweak QemuRunner so we can actually restart the
qemu target in a test (if we want more memory for example).
Also add a restart method to the base test class so that tests
can use it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add class to be inherited by smart tests, along with more basic tests and tests
using a rpm repository.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Decorators should return whatever the decorated methods return.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Save host IP address to host_ip.
Read /proc/PID/cmdline on host to look for IPs of target and host;
instead of running 'ps'.
Also removed some extra empty lines from file.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
to the target
It can be used by smart repo/channel tests to serve deploy_dir.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies to target rpm-doc file from deploy_dir
and tries to install and then remove that package.
rpm-doc was chosen because it's small, it only adds
a few files to target, and it's almost always found in
deploy_dir for images with package-management/rpm.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies a 5MB to target using scp, more of an
network test than a scp one.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies some usual commands functionality with PAM support
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies the usage of skeleton init script available with meta-skeleton layer
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New logrotate test which verifies the log directory change in logrotate.conf.
Needs an image with logrotate installed.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test checks that at least one path in RTLDLIST exists.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test runs a perl script on the target and checks the output.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Checks that an x86-64-x32 image has the right binaries.
Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- path normalization ('normalize' flag, defaults to enabled)
- existence verification for paths we know should exist ('mustexist' flag)
- supports clean handling of relative paths ('relativeto' flag)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New systemd runtime tests for enable/disable service, start/stop service and list services.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add separate tests for restarting syslog and using logger, and
skip the configuration test for systemd images which always fail
because syslog's systemd service doesn't read a config by default
(see YB#4860).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The way we read data from the serial console was unreliable and blocking (AutoBuilder
seems to hit that often), so change the serial console type from unix socket to tcp
and reverse the connection - don't let qemu act as server (wait for a connection).
So now the serial console is used to save the boot log and make sure that we reached
the login prompt. Until a better way is found this should solve some of the AutoBuilder
failures (one being YB#4904).
Also we need to use the same method as the old qemuimagetest to get the ip
(from the qemu process arguments), because that it's more reliable.
The first version used here was to log into the target and use the output of
"ip addr show eth0" but then systemd decides that it should rename interfaces,
so that was changed to get the ip of the interface that has the default gw,
but if there is no default gw we'll get the loopback ip and we end up trying to
ssh into the host machine (some recent AutoBuilder runs showed that).
Changed in V2:
- use -ww for ps, as output might get truncated
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If nothing matches we should print the text not
the match, else we get a nice traceback.
Changed in V2:
- commit message
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Use our determined ps command, otherwise test fails for images with procps.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Sync serial baud rate with default inittab which should
help with apparent boot fails. Also keep a console on tty1.
Also we shouldn't assume eth0 it the right interface.
(systemd images can rename interfaces to something else).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
One of the files was missing comment/header, unlike the others.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Increase a bit the timeout for ssh commands and also
write in the output that the command timed out (it's
easier to see that in a test fail than checking the ssh log)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
A simple clone of the corresponding Gnome class. Without this, devshell
fails completely on a default installation of MATE desktop Linux Mint 15.
Signed-off-by: Andre McCurdy <andre.mccurdy@entropic.com>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Adds missing skip for smart test and fix the check (which I somehow broke
a while ago).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Adds some comments to testimage.bbclass and the files it calls,
just to give an ideea of what it does.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Make a copy of the rootfs and test that.
We can now drop the snapshot option.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add tests for free space and syslog.
Changed in v2:
- limit df's output to /
- syslog: fix restart in case of systemd
Signed-off-by: Alexandru Palalau <alexandru.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Many tests will use 'ps' but we need to know if it's busybox
or standard ps.
Drop the existing check from the connman test.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
file was pulled by rpm in sato images, readelf comes with binutils
so it's in ipk/deb too.
Also the test was looking at connmand instead of connman-applet
(which is what the testcase says and the AB nightly-multilib target installs)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
configurable and increase it
On a loaded host (such as an AB setup where multiple builds run)
the 200 seconds timeout might not be enough to reach the login prompt.
Also make it configurable so we can set it from local.conf/auto.conf
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Don't use shlex.split in subprocess call and also prepend
. /etc/profile, because PATH over ssh is always
/usr/bin:/bin which isn't what many tests expect.
Changed in v2:
We now need to use a separate call for scp command.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
name
Messages such as:
"systemd-udevd[79]: error changing net interface name eth0 to enp0s3: Device or resource busy"
are harmless as systemd can't rename interfaces in qemu (the interface is already active).
Alternatively, passing net.ifnames=0 to the kernel will stop systemd renaming the interfaces.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
gcc compile test and support files.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
These are basic sanity tests. A test can be force run by setting
TEST_SUITES = "ping ssh <module-name>" in local.conf.
By default there are suites for minimal, sato and sato-sdk images.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
|
|
Some skip decorators meant only for test methods, providing
some kind of test methods dependency.
They are used together with a test method name not a condition.
These are complementary to python's unittest skip decorators.
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
Handles qemu instances (launch, kill, restart, serial connection, logging)
Launch is blocking until login prompt and returns to the task. A qemu
serial connection is used to save the boot log and get the ip from the image.
Changed runqemu script not to error out when using custom serial option.
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
Python's telnetlib Telnet class connects only to AF_INET sockets, but we
want to use Unix domain socket for the qemu serial connection, so that's
why we override it.
Also we add a new read_all_timeout method similar to Telnet's read_all,
that read until a match or timeout and logs all output.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
Provides a class for setting up ssh connections,
running commands and copying files to/from a target.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
This module contains the base class for all runtime tests
and some helper methods.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
|
|
Just as in f8ed7446755eeb88191e16749350efa1e7e6197c, tmux wants a single
argument for its command. This applies to the "split-window" command as
well as "new."
Note that this alone is not enough to fix the TmuxRunning devshell when
using pseudo because tmux does not preserve the environment that pseudo
requires.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The new standard for host distribution identification [1] is
/etc/os-release, and a number of newer distributions provide this file,
so add support for this in order to pick up more distributions.
Additionally, handle "rolling release" style distributions that don't
report a version number, e.g. Arch Linux.
With this change we can identify the most common distributions, so this
should satisfy [YOCTO #4271]. Note that this doesn't imply support for
these distros as build hosts, just that we can identify them.
[1] http://www.freedesktop.org/software/systemd/man/os-release.html
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Trying to make a devshell using tmux can fail because "tmux new"
expects a single command, not a series of arguments. It does, however,
split strings in a suitable way. So you can quote the command.
The failure mode is particularly arcane, in that you end up
with a message like:
ERROR: Unable to spawn terminal auto: \
Execution of 'pseudo /bin/bash' failed with exit code 1:
usage: new-session [-d] [-n window-name] [-s session-name] \
[-t target-session] [command]
which is confusing because there's no "new-session" anywhere in
sight (that's actually "tmux new"), and because what failed to execute
wasn't either pseudo or bash.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Instead of reporting an error when bb cannot be imported, skip the test
instead. This makes it a lot easier to iterate a test suite when we don't care
about this particular test.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a helper function that returns just the first <num_parts> of <version>,
split by periods. For example, trim_version("1.2.3", 2) will return "1.2".
This should help reduce the spread of numerous copies of this idea across
classes and recipes.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
