| Age | Commit message (Collapse) | Author | Files |
|---|
|
It is better to use "git am" when possible to preserve the commit messages and
the mail format in general for patches when those are present. A typical use
case is when developers would like to keep the changes on top of the latest
upstream, and they may occasionally need to rebase. This is not possible with
"git diff" and "diff" generated patches.
Since this is not always the case, the fallback would be the "git apply"
operation which is currently available.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a cpu_count wrapper function (useful from annonymous python where
the import would be trickier).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Ocasionally AB shows odd false fails like:
http://autobuilder.yoctoproject.org/main/builders/nightly-arm/builds/1/steps/Running%20Sanity%20Tests/logs/stdio
This should fix that by checking for eof instead of
polling the return code of the ssh process, because the process
might still be there.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I don't have any real evidence or good statistics for this, but when
comparing signature dumps from my big bitbake world builds I usually
see a lot of rebuilds caused by changes in .bbclasses and only very
rare would be the case where oe-core upgrade brings changes in -native
recipes and no change in .bbclasses used from target recipes
* changing the default to include them shouldn't cause significant
increase in rebuilds and sstate reuse a bit safer
* people working on toolchain (e.g. using gcc from AUTOREV) can easily
extend sstate_rundepfilter to ignore them again (it's easier than
removing existing filter), example how add own signature handler in
your layer is here:
https://github.com/openwebos/meta-webos/commit/9ac3a7c803e7793b3274e4998f167b6278db8042
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Made modifications to account for:
- .siginfo files present in sstate-cache from non sstate-enabled tasks
- new naming format for sstate files
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allows a layer to define new classes in <layer>/lib/oeqa/utils/controllers.py
and completely control or extend deployment of a target. (core currently
has QemuTarget and SimpleRemoteTarget).
The value of TEST_TARGET must be the name of the new class.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- SStateBase now has its own module to be imported by itself by other modules like sstatetests.py
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- SStateBase object contains basic methods used to run sstate related tests
- SStateTests now contains only sstate-related tests
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When checking that no services have failed to start, actually wait for services
to finish starting by waiting for there not be no units in the "activating"
state.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Run a python script on the target
1)checks the output.
2)Call os.system method create a testfile
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
to gnome-terminal
By default, all GNOME terminals share a single process,
reducing memory usage. This can be disabled by starting gnome-terminal
with the --disable-factory option
However, gnome-terminal in Fedora 20 does no longer support the
'--disable-factory' flag, so remove it. As the support for 'mate' terminals was
added as a copy of the gnome code in 8cc078a9c679845464c59028f584d7aba098cc1f,
remove the flag here aswell.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Like fetch, unpack and patch, populate_lic doesn't vary between different
archs so we should mark it as such. This means better sstate cache reuse
with fewer duplicate files as well as less confusing sstate debugging.
sstatesig also needs to account for the fact BPN is used for sstate files
in these cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are basically the same tests but:
- they look cleaner, using one single method / assert
- output from unittest will be cleaner (and includes a verbose status when needed)
- they are better grouped and use a real, active, enabled service
(machineid will be dropped and hostnamed was a static service)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Added a new module meta/lib/oeqa/selftest/oescripts.py containing tests
for scripts from ${COREBASE}/scripts
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
By resetting filesdates at this point, we lose matches from stamps which
may not have been in sstatedir. When we don't have hashes specicifed,
its better to return all matches and have the caller decide which are
relavent and which are not since this function has no ability to
decide. There will almost always be one match from stamps we need
to keep and refer to.
(From OE-Core rev: f4c1c9ad2c7e944d4926d0629611da97f9df6a9a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've dropped sstate-name so we can remove this code. The fallback was
incorrect since we use taskname without the do_ prefix so this patch
updates to account for that too.
(From OE-Core rev: 72ff58124081333d46d37f31f2d1bf40d715e3bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the hashes to find isn't specified we need to return matches from both
the sstate cache and the local stamps directory regardless of how many we've
found so far. If we don't do this, we can miss stamps and the comparison is
less accurate/incorrect.
(From OE-Core rev: 08a074e11e2d517b81ca71fd9bda65297bb015a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the hostnamed service can't be started or stopped, show the output from
systemctl status to assist debugging.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Added a track_for_cleanup(path) method that removes the given path in the
tearDown method. This mechanism can be used to make sure a file or directory
we created will be removed at the end of a test, regardless of what happens.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a new method that can be used by the tester to add a command to the
executed in the tearDown stage of the test. This mechanism can be used to
make sure certain test-specific cleanup tasks are done in the case of a
test failure.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If some services have failed to start, get the status of them and some of their
log to help debug the problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If connman isn't running and we're running under systemd, use systemctl to get
the state according to systemd and the end of the connman log.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While harmless, we should overwrite the config not append to it,
and use m4 as target, otherwise the WARN check will
build an entire image and we are not interested in that.
Also add an output check for the WARN_QA test.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
complete cleanup at the end
The script should clean-up all the .inc files that might
have been created by tests regardless of the outcome or if
the script is interrupted. (currently the
last test will leave a conf/selftest.inc around, even
if it's not included anywhere)
Also fix delete_recipeinc to actually delete what's supposed to.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
targets
Add a new module which abstracts the target object used by testimage.bbclass
The purpose of this module is to move the deployment of a target from testimage.bbclass,
basically abstracting different implementations of how we setup a target and how it runs commands.
It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote").
QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass)
SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running
with network and ssh.
Simply put, it opens the door for running the tests on different types of targets by adding new classes
(maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses
the existing SSHControl module and add a serial implementation.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new manifest file instead of ${WORKDIR}/installed_pkgs.txt for determining
if an image has a certain package, because installed_pkgs.txt goes away with rm_work
enabled.
We can't use the IMAGE_MANIFEST var for the file path because that relies on IMAGE_NAME which
changes at every run (because of date), so we use the link which points to the last
one built.
[ YOCTO #5072 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bitbake-layers
Tests for bitbake-layers and expected output for some bitbake options.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build images and tests different build options like RM_OLD_IMAGE
and for WARN_QA/ERROR_QA behaviour.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
various scripts
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add PACKAGE_EXCLUDE and NO_RECOMMENDATIONS to the info we track for
images, since these can change what ends up in the image.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the "ABI safe" recipes, we've been excluding those from signatures. This
is fine in the general case but in the specific case of image recipes it breaks.
A good test case is the interfaces file. Editting this causes init-ifupdown
to rebuild but not an image containing it (e.g. core-image-minimal).
We need to ensure the checksums are added to the image recipes and this change
does that.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connman unique test starts another instance of connmand and then does a ps to
verify that there's only one of these running, on the assumption that the new
one has quit because there's already one running (started by init).
However, connmand is forking into the background straight away so there's a race
between running ps and the second connmand discovering the first and exiting.
This race can be seen because the test displays the output of ps, and by the
time that second ps has been executed the new connmand has exited.
This is a classic race condition and on a heavily loaded autobuilder inserting
an arbitrary sleep isn't wise. In the scheme of things this test isn't very
useful, so delete it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core commit b7de1eaac9eed559b2d68058f5de67de74a6cb58 added an extra
argument to the compare_dict_blobs() function but missed adding the
argument to one call to compare two versions of the image-info.txt file.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
copyhardlinktree()
Files named .* in the top level of directories handled by this function
were getting lost after the directory copying command was fixed. Rather
than complicate the function further, use cpio instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the directory copy was added to avoid race issues, it wasn't noticed that
tar was recursing the directories and copying files too. This is completely
crazy when we hardlink those files in the next command.
Resolve the issue by telling tar not to recurse. This gives a significant
performance boost to various parts of the system (do_package for linux-yocto
256s -> 178s for example).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of running the commands with a fixed timeout,
we should kill the command if there is no output
for timeout seconds.
Also changed some strings/comments.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
packagegroups are allarch and shouldn't change depending on the target
or machine selected. In general they should have good stable namespaces
for their dependencies. As such we can exclude them from rebuilding when
dependency checksums change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add oeTest superclass, make oeRuntimeTest inherit that and
make the necesarry adjustments. Tests in lib/oeqa/runtime don't
change, they still inherit oeRuntimeTest.
We should do this because oetest.py in the future can be a base module
for more stuff than oeRuntimeTest.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add a -v/--report-ver option to report changes in PKGE/PKGV/PKGR even
if the value is the same as the default from PE/PV/PR.
Also add a -a/--report-all option to report all changes instead of just
the default significant ones.
Addresses [YOCTO #5263].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Builds a simple Hello World module on target.
Added to the defaults for core-image-sato-sdk.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tar version 1.27 returns:
tar: --same-order option cannot be used with -c
with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
